Garmin 02963 Handheld UHF Two-way radio with GPS User Manual part 1of2

Garmin International Inc Handheld UHF Two-way radio with GPS Users Manual part 1of2

Contents

Users Manual part 1of2

Rino® 700 Series Owner’s ManualAugust 2016 190-01987-00_0ADRAFT
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.Garmin®, the Garmin logo, and Rino® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. ANT+®, Connect IQ™, Garmin Connect™, Garmin Express™, and TracBack® are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.The Bluetooth® mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. microSD™ and the microSDHC logo are trademarks of SD-3C, LLC. Other trademarks and trade names are those of their respective owners.DRAFT
Table of ContentsIntroduction.....................................................................1Device Overview......................................................................... 1Battery Information.................................................................1Installing the Lithium-ion Battery............................................ 1Installing AA Batteries............................................................ 2Turning On the Device................................................................ 2Device Operation........................................................................ 2Opening the App Drawer....................................................... 2Locking the Touchscreen....................................................... 2Acquiring GPS Signals............................................................... 2Radio............................................................................... 3Transmitting................................................................................ 3The Radio App............................................................................ 3Opening the Radio App......................................................... 3Adjusting the Radio Volume...................................................3Adjusting the Squelch Level.................................................. 3Channels and Codes.................................................................. 3Selecting a Channel............................................................... 3Selecting a Squelch Code..................................................... 3Monitoring a Channel for Activity........................................... 3Scanning Channels................................................................ 4Repeater Channels................................................................ 4Peer-to-Peer Positioning.............................................................4Polling Other Rino Users....................................................... 4Editing Your Contact Info....................................................... 4Contacts......................................................................................4Saving a New Contact........................................................... 4Viewing Contacts on the Map................................................ 4Navigating to a Contact..........................................................4Notes.......................................................................................... 4Creating, Saving, and Sending Notes.................................... 4Emergency Alerts....................................................................... 4Sending an Emergency Alert................................................. 4Responding to an Emergency Alert....................................... 4Radio App Settings..................................................................... 4Radio Setup........................................................................... 5Connected Features....................................................... 5Pairing Your Smartphone........................................................... 5Viewing Widgets......................................................................... 5Connect IQ Features.................................................................. 5Downloading Connect IQ Features........................................ 5Weather........................................................................... 5Monitoring SAME Weather Alerts............................................... 5Opening the Weather App.......................................................... 6Viewing Weather Conditions and Forecasts.......................... 6Viewing SAME Weather Alerts on the Map........................... 6Geocaches...................................................................... 6Registering Your Device at Geocaching.com............................. 6Connecting to Geocaching.com............................................. 6Searching for a Geocache.......................................................... 6Navigating to a Geocache.......................................................... 6Using Hints and Clues to find a Geocache............................ 6Logging the Attempt....................................................................6Filtering the Geocache List......................................................... 7Saving a Custom Geocache Filter......................................... 7Editing a Custom Geocache Filter......................................... 7Applying a Custom Filter to a Geocache List......................... 7Downloading Geocaches Using a Computer.............................. 7chirp............................................................................................ 7Enabling chirp Searching....................................................... 7Finding a Geocache with a chirp............................................7Removing Live Geocache Data from the Device........................ 7Removing Your Device Registration From Geocaching.com..... 7Activities......................................................................... 7Recording an Activity.................................................................. 7Creating a New Activity...............................................................8Editing an Activity Name........................................................ 8Editing an Activity Icon........................................................... 8Deleting an Activity..................................................................... 8Customizing Your Activity Log.................................................... 8Pausing an Activity..................................................................... 8Saving the Current Activity......................................................... 8Clearing the Current Activity....................................................... 8Deleting an Activity History......................................................... 8Viewing Activity Information........................................................ 8Viewing the Elevation Plot of an Activity..................................... 8Saving a Location on an Activity................................................. 8Opening Track Manager............................................................. 8Navigation....................................................................... 9Navigating to a Destination......................................................... 9Finding a Location Near Another Location............................ 9Stopping Navigation............................................................... 9Navigating with the Map............................................................. 9Navigating Using TracBack®...................................................... 9Optional Maps.............................................................................9Finding an Address................................................................ 9Navigating with the Compass..................................................... 9Calibrating the Compass........................................................9Course Pointer....................................................................... 9Navigating with Sight 'N Go........................................................ 9Elevation Plot............................................................................ 10Navigating to a Point on the Elevation Plot.......................... 10Changing the Plot Type....................................................... 10Resetting the Elevation Plot................................................. 10Calibrating the Barometric Altimeter.................................... 10Waypoints..................................................................... 10Marking Your Current Location as a Waypoint......................... 10Finding a Waypoint................................................................... 10Editing a Waypoint.................................................................... 10Deleting a Waypoint..................................................................10Increasing the Accuracy of a Waypoint Location...................... 10Projecting a Waypoint............................................................... 10Routes........................................................................... 10Creating a Route Using Route Planner.................................... 10Creating a Route Using the Map.............................................. 11Editing the Name of a Route.................................................... 11Editing a Route......................................................................... 11Viewing a Route on the Map.................................................... 11Deleting a Route....................................................................... 11Viewing the Active Route.......................................................... 11Reversing a Route.................................................................... 11Viewing the Elevation Plot of a Route...................................... 11Garmin Adventures...................................................... 11Sending Files to BaseCamp..................................................... 11Creating an Adventure.............................................................. 11Starting an Adventure............................................................... 11Camera and Photos...................................................... 12Taking a Photo..........................................................................12Applications.................................................................. 12Sending and Receiving Data Wirelessly................................... 12Setting a Proximity Alarm......................................................... 12Calculating the Size of an Area................................................ 12Viewing the Calendar and Almanacs........................................ 12Setting an Alarm....................................................................... 12Starting the Countdown Timer.................................................. 12Opening the Stopwatch............................................................ 12Satellite Page............................................................................12Table of Contents iDRAFT
Changing the Satellite View................................................. 12Turning Off GPS.................................................................. 12Simulating a Location...........................................................12Controlling a VIRB® Action Camera......................................... 12Phone Notifications................................................................... 13Hiding Notifications.............................................................. 13Fitness........................................................................... 13History.......................................................................................13Viewing an Activity History................................................... 13Deleting an Activity from Your History................................. 13Using Garmin Connect.........................................................13Optional Fitness Accessories...............................................13About Heart Rate Zones........................................................... 13Fitness Goals....................................................................... 13Setting Your Heart Rate Zones............................................ 13Customizing the Device............................................... 13Adjusting the Backlight Brightness........................................... 13Customizing the Keys............................................................... 14Customizing the Main Menu..................................................... 14Changing Items on the Main Menu...................................... 14Customizing the Dashboard on the Main Menu................... 14Customizing the App Drawer.................................................... 14Adding a Shortcut to the Main Menu........................................ 14Creating a Shortcut.............................................................. 14Custom Data Fields and Dashboards....................................... 14Enabling the Map Data Fields.............................................. 14Customizing the Data Fields................................................ 14Customizing Dashboards..................................................... 14Setting the Touchscreen Sensitivity......................................... 14Display Settings........................................................................ 14Configuring the Maps................................................................15Map Settings........................................................................ 15Advanced Map Settings....................................................... 15System Settings........................................................................ 15Satellite Settings.................................................................. 15GPS and GLONASS............................................................ 15Appearance Settings................................................................ 15Setting the Device Tones..........................................................15Routing Settings....................................................................... 15Heading Settings...................................................................... 15Altimeter Settings......................................................................16Position Format Settings...........................................................16Changing the Units of Measure................................................ 16Time Settings............................................................................ 16Geocaching Settings.................................................................16ANT+ Sensor Settings.............................................................. 16Fitness Settings........................................................................ 16Setting Your Fitness User Profile......................................... 16Marking Laps by Distance....................................................16Marine Settings......................................................................... 16Setting Up Marine Alarms.................................................... 16Resetting Data and Settings..................................................... 17Restoring Default Values for Specific Settings.................... 17Restoring Default Values for Specific Page Settings........... 17Restoring All Default Settings.............................................. 17Device Information....................................................... 17Attaching the Carabiner Clip..................................................... 17Headsets and Microphones...................................................... 17Support and Updates................................................................ 17Device Care.............................................................................. 17Cleaning the Device............................................................. 17Cleaning the Touchscreen................................................... 17Water Immersion..................................................................17Data Management.................................................................... 17File Types............................................................................ 17Installing a Memory Card..................................................... 18Connecting the Device to Your Computer........................... 18Transferring Files to Your Device........................................ 18Deleting Files....................................................................... 18Disconnecting the USB Cable..............................................18Specifications............................................................................18Radio Frequency Charts...................................................... 18FCC Licensing Information....................................................... 20Viewing Device Information...................................................... 20Troubleshooting........................................................... 21My handheld device is not responding..................................... 21My device does not turn on...................................................... 21The battery gauge does not seem accurate............................. 21My phone will not connect to the device................................... 21My device is not acquiring satellite signals............................... 21My device does not go into mass storage mode automatically............................................................................. 21I need to reset all settings back to factory default values......... 21Appendix....................................................................... 21tempe™.................................................................................... 21Data Fields................................................................................21Heart Rate Zone Calculations...................................................23Index.............................................................................. 24ii Table of ContentsDRAFT
Introduction WARNINGSee the Important Safety and Product Information guide in the product box for product warnings and other important information.Device OverviewÀFRS/GMRS antennaÁGPS antennaÂCamera lens and flash (not available on all models)ÃMini-USB port (under weather cap)2.5 mm headset jack (under weather cap)ÄBattery cover D-ringÅmicroSD™ card slot (under battery door)Battery Information WARNINGThe temperature rating for the device may exceed the usable range of some batteries. Alkaline batteries can rupture at high temperatures.Do not use a sharp object to remove batteries. CAUTIONContact your local waste disposal department to properly recycle the batteries.NOTICEAlkaline batteries lose a significant amount of their capacity as the temperature decreases. Use lithium batteries when operating the device in below freezing conditions.Maximizing the Battery LifeYou can do several things to extend the life of the batteries.• Reduce the backlight brightness (Adjusting the Backlight Brightness, page 13).• Reduce the backlight timeout (Display Settings, page 14).• Use battery save mode (Turning On Battery Save Mode, page 1).• Decrease the map drawing speed (Configuring the Maps, page 15).Turning On Battery Save ModeYou can use battery save mode to prolong the battery life.From the app drawer, select Setup > Display > Battery Save > On.In battery save mode, the screen shuts off when the backlight times out. You can select to turn on the screen.Long-Term StorageWhen you do not plan to use the device for several months, remove the batteries. Stored data is not lost when batteries are removed.Installing the Lithium-ion Battery1Locate the Lithium-ion battery pack included in the product box.2Align the metal contacts on the battery pack with the metal contacts on the back of the device.3Press and hold the battery pack in place.4Turn the D-ring clockwise to secure the battery pack onto the device.Charging the Battery PackNOTICETo prevent corrosion, thoroughly dry the USB port, the weather cap, and the surrounding area before charging or connecting to a computer.Do not attempt to use the device to charge a battery that was not provided by Garmin®. Attempting to charge a battery that was not provided by Garmin can damage the device and void the warranty.Before you can connect the straight connector of the USB cable to your device, you may need to remove optional mount accessories.NOTE: The device does not charge when outside the approved temperature range (Specifications, page 18).You can charge the battery using a standard wall outlet or a USB port on your computer.1Pull up the weather cap À from the mini-USB port Á.2Plug the small end of the USB cable into the mini-USB port.3Plug the USB end of the cable into an AC adapter or a computer USB port.4If necessary, plug the AC adapter into a standard wall outlet.When you connect the device to a power source, the device turns on.5Charge the battery completely.Introduction 1DRAFT
Installing AA BatteriesInstead of the Lithium-Ion battery pack (Installing the Lithium-ion Battery, page 1), you can use four alkaline, NiMH, or lithium AA batteries with an optional AA battery pack (not included). This is useful when you are on the trail and cannot charge the Lithium-Ion battery pack. Use NiMH or lithium batteries for best results.The AA battery pack contains two parts.1If necessary, turn the D-ring counter-clockwise, and pull up to remove the battery pack from the device.2Push down on the lever inside the AA battery pack À to separate the two parts Á.3Insert four AA batteries, observing polarity.4Starting at the bottom, connect the two parts of the battery pack together and press until the top locks into place.5Align the metal contacts on the battery pack with the metal contacts on the back of the device.6Press and hold the battery pack in place.7Turn the D-ring clockwise to secure the battery pack onto the device.Turning On the DeviceHold .Device OperationYou can operate this device using a combination of hardware key and touchscreen actions.ÀWidgets Swipe down to view widgets (Viewing Widgets, page 5).Á(Call key)Select to transmit an attention tone on the current channel.Hold to send an emergency alert (Emergency Alerts, page 4).You can customize the function of this key (Customizing the Keys, page 14).Â(Power key)Select to adjust the backlight.Hold to turn the device on or off.ÃPTT(Push-to-talk)Hold to transmit on the current radio channel (Transmitting, page 3).ÄMain menu Select the radio dashboard at the top of the main menu to launch the radio app.You can customize the dashboard on the main menu (Customizing the Dashboard on the Main Menu, page 14).Select the shortcuts to launch applications.You can customize the shortcuts on the main menu (Customizing the Main Menu, page 14).ÅVolume keys Select to adjust the volume.Æ(App drawer)Swipe up to open apps and Connect IQ™ apps.Opening the App DrawerThe app drawer contains all of the applications used to operate this device.1From the main menu, swipe up from the bottom of the screen.2Swipe down from the top of the screen to return to the main menu without launching an application (optional).Locking the TouchscreenYou can lock the screen to prevent inadvertent screen touches.Select > .Acquiring GPS SignalsWhen you turn on your navigation device, the GPS receiver must collect satellite data and establish the current location. The time required to acquire satellite signals varies based on several factors, including how far you are from the location where you last used your navigation device, whether you have a clear view of the sky, and how long it has been since you last used your navigation device. The first time you turn on your navigation device, it may take several minutes to acquire satellite signals.1Turn on the device.2Wait while the device locates satellites.3If necessary, go to an open area, away from tall buildings and trees. in the status bar indicates the satellite signal strength. When at least half the bars are filled, the device is ready for navigation.2 IntroductionDRAFT
RadioIn the United States and Canada, this device uses Family Radio Service (FRS) and General Mobile Radio Service (GMRS) for two-way communication with other compatible radio devices.In Australia, this device uses UHF Citizen Band Radio Service (UHF CBRS), and in New Zealand, this device uses UHF Personal Radio Service (PRS) for two-way communication with other compatible radio devices.When communicating with other Garmin Rino devices, additional features are available.TransmittingTo communicate with other Rino and FRS/GMRS or UHF CBRS/PRS radio users, you must be on the same channel and code (Channels and Codes, page 3).1Hold PTT.2Speak into the front of the device.3After you are finished speaking, release PTT.After you release PTT, the radio transmits your position information, and you cannot hear incoming transmissions until your transmission is complete . A roger tone sounds on your radio and on the radios receiving your transmission to confirm that the transmission is complete.NOTE: You can change or disable the roger tone (Setting the Device Tones, page 15).The Radio AppUsing the radio app, you can view information about the radio, control the radio channel and squelch codes, and customize the radio features.Icons along the top of the radio page provide useful information about the radio.: Indicates the activity status of the radio. When an arrow is pointing at the radio, the radio is receiving a transmission. When an arrow is pointing away from the radio, the radio is transmitting.: The radio is ready to transmit position information (Peer-to-Peer Positioning, page 4).: Weather alerts are enabled (Radio App Settings, page 4).: The radio is muted (Adjusting the Radio Volume, page 3).Opening the Radio AppYou can manage your channel, code, and other radio settings in the radio app.From the app drawer, select Radio.TIP: You can also select the radio dashboard at the top of the main menu to open the radio app.Adjusting the Radio Volume1From any screen, select the volume keys to change the radio volume.The volume screen appears.2Select to mute or restore the radio volume (optional).Adjusting the Squelch LevelYou can adjust the sensitivity level of the squelch to filter out background noise. When you adjust the squelch level higher, fewer weak background signals are heard.1When you hear unwanted background noise, from any screen, select the volume keys.The volume screen appears.2Select under the Squelch bar.You should increase the squelch level until you no longer hear the unwanted background noise.Channels and CodesTo communicate with other Rino and FRS/GMRS or UHF CBRS/PRS radio users, you must be on the same channel.Rino devices are compatible with third-party FRS/GMRS or UHF CBRS/PRS radios as long as the radios use standard FRS/GMRS or CBRS/PRS frequencies. A list of all frequencies used by this device is available in the product specifications (Radio Frequency Charts, page 18).NOTE: GMRS frequencies are regulated by the FCC in the United States. To transmit on GMRS frequencies, you must obtain a license from the FCC (FCC Licensing Information, page 20).US and Canada Channel Number Channel Type1 through 7 GMRS and FRS channels8 through 14 FRS channels15 through 22 GMRS channels15R through 22R Repeater channelsAustralia and New Zealand Channel NumberChannel Type1 through 40 UHF CBRS/PRS channels1R through 8R CBRS/PRS repeater channelsSquelch codes allow you to filter calls from other users on the same channel, so you hear only the radios you want to hear. The device has two different squelch modes, Continuous Tone Controlled Squelch System (CTCSS) and Digital-Coded Squelch (DCS). Calls on the channel that are not using the same squelch code in the same squelch mode are ignored.NOTE: Squelch codes do not make your conversation private. Anyone on the same channel can hear your conversation.Squelch Tone ModeSquelch CodesCTCSS 1 through 38DCS Listed in the product specifications (Radio Frequency Charts, page 18)Selecting a Channel1From the radio app, select Channel.2Select or to change the channel.3Select .Selecting a Squelch Code1From the radio app, select Code CTCSS or Code DCS.2Select or to change the code.NOTE: Selecting Off allows you to hear everything on the channel.3Select .NOTE: If you cannot hear calls on the same channel with the same code, make sure all the radios are using the same squelch tone mode (Changing the Squelch Tone Mode, page 3).Changing the Squelch Tone ModeThis device can use two types of squelch tone modes, CTCSS and DCS. If you cannot hear calls on the same channel with the same code, make sure all the radios are using the same squelch tone mode.1From the radio app, select > Radio Setup > Squelch Tone Mode.2Select a squelch tone mode.Monitoring a Channel for ActivityYou can monitor a single channel for any activity, including static and weak voice signals. This is helpful if a signal is going out of range.1From the radio app, select the channel you want to monitor.Radio 3DRAFT
2Select Monitor.Scanning ChannelsYou can scan the channels for voice activity. This can help you find a channel with light activity for your group to use, or to find other radio users in the area.From the radio app, select Scan.Configuring the Scan ListBy default, all available channels are included when scanning. You can configure the scan list to include only specific channels and squelch codes. Selecting specific channels and codes reduces the scan time and may help prevent a missed transmission.1From the radio app, select > Scanlist Setup.2Select one or more channels to remove from the list.3To restrict the scan to the current squelch code, select > Scan Current Codes (optional).4Select .Repeater ChannelsThis device can use GMRS repeater channels in the US, and CBRS/PRS repeater channels in Australia and New Zealand. GMRS repeater channels are not available in Canada.Repeater channels use repeaters, when available, to enable communication around obstacles or increase transmission distance. Position reporting is not allowed by the FCC on GMRS repeater channels.Peer-to-Peer PositioningYou can send your location information to other Rino users using peer-to-peer positioning. Through peer-to-peer positioning, you can also track the movement of other Rino users and navigate to their locations.Peer-to-peer positioning is enabled by default, and your position information is sent when you press the PTT key (push-to-talk) or the key (call).NOTE: You can send location information only once every 30 seconds, due to FCC restrictions.After you send location information, the icon changes to a countdown timer so you know when location information can be sent again.Polling Other Rino UsersYou can request position updates for other Rino users who are in your saved contacts (Saving a New Contact, page 4).1From the contacts app, select a saved contact.2Select Poll Location.The location of the contact is updated on the map.Editing Your Contact InfoFrom the radio app, you can change the symbol and name transmitted to other Rino users through peer-to-peer positioning.• To change your name, select the name field.• To change your symbol, select the symbol.ContactsYou can save information about another Rino user as a contact. You can view location information and navigate to the location of users in your contacts list.Saving a New ContactThe first time the device receives a peer-to-peer positioning signal from another Rino user, the new contact page appears. To save the contact details or navigate to the contact in the future, you must save the new contact in your contacts list.From the new contact page, select OK.The new contact is saved in your contacts list.Viewing Contacts on the Map1From the main menu, select Contacts.TIP: To open the contacts app from the radio app, select .2Select a contact.3Select View Map.Navigating to a Contact1From the app drawer, select Contacts.TIP: To open the contacts app from the radio app, select .2Select a contact.3Select View Map > Go.4Follow to the contact's location.NotesYou can send short notes to other Rino users on your current channel and code. You can review previously received notes from your contacts. You can edit and save favorite notes to quickly send them later.NOTE: Notes transmit to all users on your current channel and code, not just to your saved contacts.Creating, Saving, and Sending Notes1From the app drawer, select Notes.TIP: To open the notes app from the radio app, select .2Select Send Note > New Note.3Enter the note text.Due to FCC regulations, you can enter a maximum of 13 characters in a note.4Select .5Select an option:• To send the note without saving it, select Send Note.• To save the note without sending it, select Save.• To save the note and send it, select Send and Save.Emergency AlertsYou can send an emergency alert to all Rino users on the current channel and code. Users can respond to an emergency alert to immediately begin navigating to your position.Sending an Emergency AlertTo send emergency alerts to other Rino and FRS/GMRS or UHF CBRS/PRS radio users, you must be on the same channel.1Hold .2Select Yes.The device sends an emergency alert every 60 seconds until another Rino user responds to the alert or you cancel the alert.Responding to an Emergency AlertTo receive emergency alerts from other Rino and FRS/GMRS or UHF CBRS/PRS radio users, you must be on the same channel.1When you receive an emergency alert, select Help.The device sends a response to the alert sender, and begins navigation to the sender's location automatically.2Follow to the sender's location.Radio App SettingsFrom the radio app, select .Turn Radio Off: Turns off the radio functionality. You cannot make or receive transmissions when the radio functionality is turned off.4 RadioDRAFT
Enable Weather Alert: Enables weather alert tones on the current channel or on all channels (Advanced Radio Setup, page 5).Radio SetupFrom the radio app, select > Radio Setup.Send Location: Enables sending position information when you transmit to other Rino users.Allow Polling: Allows polling requests from other Rino users.Power Level: Sets the power level used to transmit using GMRS channels in the US and Canada, and UHF CBRS/PRS channels in Australia and New Zealand. FRS channels in the US and Canada can transmit using only 1/2 W power. If the battery level is too low to support transmissions using higher power levels, the value of this setting decreases automatically.Squelch Tone Mode: Sets the squelch mode (Changing the Squelch Tone Mode, page 3).Repeater Channel: Enables the GMRS repeater channels in the US, and the CBRS/PRS repeater channels in Australia and New Zealand. GMRS repeater channels are not available in Canada (Repeater Channels, page 4).Advanced Radio SetupFrom the radio app, select > Radio Setup > Advanced Setup.Headset Type: Sets the type of accessory headset or microphone you are using with the device (Headsets and Microphones, page 17).VOX Level: Sets the sensitivity of a connected Voice Operated Transmission (VOX) accessory. A lower VOX setting is recommended for quiet environments, and a higher VOX setting is recommended for noisy environments.Weather Alert: Sets the channels that are monitored for weather alerts when weather alerts are enabled.Connected FeaturesConnected features are available for your Rino 700 Series device when you connect the device to a compatible smartphone using Bluetooth® wireless technology. Some features require you to install the Garmin Connect™ Mobile app on the connected smartphone. Go to www.garmin.com/apps for more information.Phone notifications: Displays phone notifications and messages on your Rino 700 Series device.Activity uploads to Garmin Connect: Automatically sends your activity to your Garmin Connect account as soon as you finish recording the activity.Connect IQ: Allows you to extend your device features with widgets, data fields, and apps.Software Updates: Allows you to update your device software.EPO Downloads: Allows you to download an extended prediction orbit file to quickly locate GPS satellites and reduce the time it takes to calculate your position.Live Geocache Data: Provides free and subscription-based services to view live geocache data from www.geocaching.com .Weather: Allows you to view current weather conditions and weather forecasts. You can also view weather radar on the map.Pairing Your Smartphone1Go to garmin.com/intosports/apps , and download the Garmin Connect Mobile app to your smartphone.2Bring your smartphone within 10 m (33 ft.) of your device.3On your device, from the app drawer, select Setup > Bluetooth, and follow the on-screen instructions.4From your smartphone, open the Garmin Connect Mobile app, and follow the on-screen instructions to connect a device.The instructions are provided during the initial setup, or can be found in the Garmin Connect Mobile app help.Phone notifications require a compatible smartphone equipped with Bluetooth Smart wireless technology. Go to garmin.com/ble for compatibility information.Viewing WidgetsYour device is preloaded with a widget that displays the status of your connections and other information. Additional widgets can be added from the Connect IQ app (Connect IQ Features, page 5).1Swipe down from the top of the screen.2Swipe left or right to view more widgets.3Select to return to the previous screen.Connect IQ FeaturesYou can add Connect IQ features to your device from Garmin and other providers using the Garmin Connect Mobile app. You can customize your device with data fields, widgets, and apps.Data Fields: Allow you to download new data fields that present sensor, activity, and history data in new ways. You can add Connect IQ data fields to built-in features and pages.Widgets: Provide information at a glance, including sensor data and notifications.Apps: Add interactive features to your watch, such as new outdoor and fitness activity types.Downloading Connect IQ FeaturesBefore you can download Connect IQ features from the Garmin Connect Mobile app, you must pair your Rino 700 device with your smartphone.1From the settings in the Garmin Connect Mobile app, select Connect IQ Store.2If necessary, select your device.3Select a Connect IQ feature.4Follow the on-screen instructions.WeatherThe weather app preloaded on this device provides weather information from two sources.• When connected to a smartphone, the device provides current weather conditions, forecasts, and weather-radar information from the Internet.• When set to monitor for weather broadcasts, the device can receive radio-transmitted Specific Area Message Encoding (SAME) county weather alerts.Monitoring SAME Weather AlertsSAME weather alerts allow you to receive radio-transmitted county weather alerts on your device.NOTE: SAME weather alerts are available in the US only.1From the radio app, select Weather.2Select a channel.You can receive weather alerts only on the selected weather channel.When you receive a weather alert on the selected channel, a message appears containing the alert information.The weather radio must remain on to receive weather alerts.Connected Features 5DRAFT
Opening the Weather AppFrom app drawer, select Weather.Viewing Weather Conditions and ForecastsTo view forecast and weather radar information, you must connect your device to a smartphone with internet access.To view forecast and weather radar information, your device must have an Internet connection. You can connect to a smartphone with Internet access (Pairing Your Smartphone, page 5).To view SAME radio weather alerts on the map, you must monitor for the alerts (Monitoring SAME Weather Alerts, page 5).You can view weather conditions and forecasts, and view weather radar on the map. When the map is dark, no weather data is loaded on the device, or the device is out of coverage. Weather data is not available for out-of-coverage areas on the map.When you view a weather radar frame, the device displays the current time for the frame.1From the app drawer, select Weather.2Select an option:• To view the weather radar on the map, select .TIP: You can animate or pause the weather map. When you stop the animation, the device displays the most recent weather data.• To view current weather conditions and forecasts, select .• To view a county map with color-coded SAME watches and warnings, select TIP: You can drag the map to view available watches and warnings in the county, and you can select the information button to view more detailed information about an alert.Viewing SAME Weather Alerts on the MapTo view SAME radio weather alerts on the map, you must monitor for the alerts (Monitoring SAME Weather Alerts, page 5).You can view a county map with color-coded SAME watches and warnings.1From the weather app, select .2Drag the map to view available watches and warnings in the county (optional).3Select a shaded area and the name of the alert to view more detailed information about an alert (optional).GeocachesGeocaching is a treasure hunting activity in which players hide or search for hidden caches using clues and GPS coordinates.Registering Your Device at Geocaching.comYou can register your device at www.geocaching.com to search for a list of nearby geocaches, or to search live information for millions of geocaches.1From the app drawer, select Setup > Geocaching > Register Device.An activation code appears.2Follow the on-screen instructions.3Select Confirm Registration.Connecting to Geocaching.comAfter you register, you can view geocaches from www.geocaching.com on your device while connected wirelessly.• Connect to the Garmin Connect app.Searching for a GeocacheYou can search the geocaches loaded on your device. If you are connected to geocaching.com, you can search live geocache data and download geocaches.NOTE: You can download detailed information for more than three geocaches per day with a premium membership. Go to www.geocaching.com for more information.1From the app drawer, select Geocaching.2Select > .3Select an option:• To search the geocaches loaded on your device by name, select Spell Search, and enter a search term.• To search for geocaches near you or near another location, select Search Near, and select a location.If you are connected to geocaching.com, the search results include live geocache data obtained by GC Live Download or by selecting the refresh button on the map.• To search for nearby geocaches on the map, select .If you are connected to geocaching.com, you can select to refresh live geocaches that are near your location on the map.• To search for live geocaches by code, select GC Live Download.This feature allows you to download a specific geocache from geocaching.com when you know the geocache code.4Select to filter the search results (optional).5Select a geocache.The geocache details appear. If you selected a live geocache and you are connected, the device downloads the full geocache details to the internal storage, if necessary.Navigating to a Geocache1Search for a geocache.2From the geocache details, select Go.3Navigate using the map (Navigating with the Map, page 9) or compass (Navigating with the Compass, page 9).4As you approach the location of the geocache, use the hints and clues to help you find the hidden cache (Using Hints and Clues to find a Geocache, page 6).Using Hints and Clues to find a GeocacheYou can use hints or clues, such as a description or coordinates, to help you find a geocache.1While navigating to a geocache, select the geocache name.2Select an option:• To view details about the geocache, select Description.• To view a clue about a geocache location, select Hint.• To view latitude and longitude for a geocache, select Coordinates.• To view feedback about the geocache from previous searchers, select Logs.• To turn chirp™ searching on, select chirp.Logging the AttemptAfter you attempt to find a geocache, you can log your results.1While navigating to a geocache, from the app drawer, select Geocaching > Log.2Select Found, Did Not Find, Needs Repair, or Unattempted.6 GeocachesDRAFT
3Select an option:• To begin navigation to the next geocache nearest you, select Find Next Closest.• To stop logging, select Done.• To enter a comment about looking for the cache or about the cache itself, select Edit Comment, enter a comment, and select .If you are connected to geocaching.com, the log is uploaded to your geocaching.com account automatically.Filtering the Geocache ListYou can filter your geocache list based on certain factors, such as the level of difficulty.1From the app drawer, select Geocaching > .2Select one or more option to filter:• To filter by a geocache category, such as puzzle or event, select Type.• To filter by the physical size of the geocache container, select Size.• To filter by Unattempted, Did Not Find, or Found geocaches, select Status.• To filter by the GPX file, live data, or pocket queries you have downloaded, select Geocache Files.• To filter by the difficulty level of finding the geocache, or the difficulty of the terrain, use the slider bars to adjust the difficulty levels.3Select .Saving a Custom Geocache FilterYou can create and save custom filters for geocaches based on specific factors.1From the app drawer, select Setup > Geocaching > Filter Setup > Create Filter.2Select items to filter.3Select .By default, the new filter is saved automatically as Filter followed by a number. For example, Filter 2. You can edit the geocache filter to change the name (Editing a Custom Geocache Filter, page 7).Editing a Custom Geocache Filter1From the app drawer, select Setup > Geocaching > Filter Setup.2Select a filter.3Select an item to edit.Applying a Custom Filter to a Geocache ListAfter you create a filter, you can apply it to the geocache list.1From the geocache list, select .2Select a filter.Downloading Geocaches Using a ComputerYou can load geocaches manually onto your device using a computer (Transferring Files to Your Device, page 18). You can place the geocache files into a GPX file and import them into the GPX folder on the device. With a premium membership to geocaching.com, you can use the "pocket query" feature to load a large group of geocaches onto your device as a single GPX file.1Connect the device to your computer using a USB cable.2Go to www.geocaching.com .3If necessary, create an account.4Sign in.5Follow the instructions at geocaching.com to find and download geocaches to your device.chirpA chirp is a small Garmin accessory that is programmed and left in a geocache. You can use your device to find a chirp in a geocache. For more information about the chirp, see the chirp Owner's Manual at www.garmin.com.Enabling chirp Searching1From the app drawer, select Setup > Geocaching.2Select chirp Searching > On.Finding a Geocache with a chirp1With chirp searching enabled, navigate to a geocache.When you are within approximately 10 m (33 ft.) of the geocache that contains a chirp, details about the chirp appear.2Select Show Details.3If necessary, select Go to navigate to the next stage of the geocache.Removing Live Geocache Data from the DeviceYou can remove live geocache data to show only geocaches manually loaded on the device using a computer.From the app drawer, select Setup > Geocaching > Geocaching Live > Remove Live Data.Live geocaching data is removed from the device and no longer appears in the geocache list.Removing Your Device Registration From Geocaching.comIf you transfer ownership of your device, you can remove your device registration from the geocaching website.From the app drawer, select Setup > Geocaching > Geocaching Live > Unregister Device.ActivitiesYour device can be used for indoor, outdoor, athletic, and fitness activities. When you start an activity, the device displays and records sensor data. You can save activities and share them with the Garmin Connect community.You can also add Connect IQ activity apps to your device using your Garmin Connect account (Connect IQ Features, page 5).When you are using an activity and you change some settings, such as data fields or units of measurement, the changes are saved automatically as part of the activity. These settings are loaded automatically the next time you switch the device to this activity.Your device includes several preloaded activities with settings configured for that activity. You can customize the settings for each preloaded activity, and you can create new custom activities.NOTE: By default, the device begins a recreational activity automatically when it is powered on.Recording an ActivityBy default, the device begins a recreational activity automatically when you turn it on.1Select an option:• To record the default recreational activity that began automatically when you turned on the device, proceed to step 4.Activities 7DRAFT
• To record a different activity type, proceed to step 2.2From the app drawer, select Activity Change.3Select the activity name.4Begin your activity.5After you complete your activity, swipe down and select Current Activity.6Select .7Select an option:• To continue your activity, select .• To save your activity, select .• To delete your activity, select .Creating a New ActivityIf none of the preloaded activities fit the needs of your activity or trip, you can create a custom activity with its own unique settings and data fields.1From the app drawer, select Setup > Activities > Create Activity.2Customize your settings and data fields.Editing an Activity NameYou can customize the name of an activity.1From the app drawer, select Setup > Activities.2Select an activity.3Select Edit Name.4Enter the new name.Editing an Activity IconYou can customize the icon displayed on an activity page.1From the app drawer, select Setup > Activities.2Select an activity.3Select Edit Icon.4Select an icon.Deleting an ActivityNOTE: Before you can delete the active activity, you must activate a different activity. You cannot delete an activity while it is active.1From the app drawer, select Setup > Activities.2Select an activity.3Select Delete.Customizing Your Activity LogYou can customize how your device displays and records activities.1From the app drawer, select Activity History > Current Activity > .2Select an option:• To change the color of the activity line on the map, select Color.• To display a line on the map indicating your activity, select Show On Map.3Select > Setup Activities > Record Method.4Select an option:• To record activities at a variable rate that creates an optimum representation of your activities, select Auto.• To record activities at a specified distance, select Distance.• To record activities at a specified time, select Time.5Select Interval.6Complete an action:• If you selected Auto for the Record Method, select an option to record activities more or less often.NOTE: Using the Most Often interval provides the most activity detail, but fills up the device memory quicker.• If you selected Distance or Time for the Record Method, enter a value, and select .Pausing an Activity1From the app drawer, select Current Activity.2Select .Saving the Current Activity1From the app drawer, select Current Activity.2Select .3Select the date and time field to rename the saved activity (optional).4Select to save the activity.Clearing the Current ActivityYou can delete all recorded activity data since the start of the activity.1From the app drawer, select Current Activity.2Select > Clear.Deleting an Activity History1From the app drawer, select Activity History.2Select an activity.3Select > Delete.Viewing Activity Information1From the app drawer, select Activity History.2Select an activity.3Select .The beginning and the end of the trail are marked by flags.4Select the information bar at the top of the screen.Information about the activity appears.Viewing the Elevation Plot of an Activity1From the app drawer, select Activity History.2Select an activity.3Select .Saving a Location on an Activity1From the app drawer, select Activity History.2Select an activity.3Select .4Select a location on the activity.5Select the location information at the top of the map.Information about the location appears.6Select > OK.Opening Track ManagerA track is a .gpx file of your recorded path. The track contains the same information as an activity except sensor data, but is saved as a .gpx file. You can customize, use, and archive tracks using the track manager.From the app drawer, select Track Manager.8 ActivitiesDRAFT
NavigationYou can navigate routes and tracks, to a waypoint, geocache, photo, or any saved location in the device. You can use the map or the compass to navigate to your destination.Navigating to a Destination1If necessary, select the activity to use while navigating (Recording an Activity, page 7).2From the app drawer, select Where To?.3Select a category.4Select a destination.5Select Go.The map opens and your route is marked with a magenta line.6Navigate using the map (Navigating with the Map, page 9) or compass (Navigating with the Compass, page 9).Finding a Location Near Another Location1If necessary, select the activity to use while navigating (Recording an Activity, page 7).2From the app drawer, select Where To?.3Select > Search Near.4Select an option.5Select a location.Stopping NavigationFrom the map or compass, select > Stop Navigation.Navigating with the Map1Begin navigating to a destination (Navigating to a Destination, page 9).2From the app drawer, select Map.A blue triangle represents your location on the map. As you travel, the blue triangle moves and leaves a track log (trail).3Complete one or more actions:• Select , and drag the map to view different areas.• Select and to zoom in and out of the map.• Select a location on the map (represented by a pin), and select the information bar at the top of the screen to view information about the selected location.Navigating Using TracBack®While navigating, you can navigate back to the beginning of your activity. This can be helpful when finding your way back to camp or the trail head.1From the app drawer, select Activity History > Current Activity > > TracBack.The map displays your route with a magenta line, start point, and end point.2Navigate using the map or the compass.Optional MapsYou can use additional maps with the device, such as BirdsEye satellite imagery, BlueChart® g2, and City Navigator® detailed maps. Detailed maps may contain additional points of interest, such as restaurants or marine services. For more information, go to http://buy.garmin.com or contact your Garmin dealer.Finding an AddressYou can use optional City Navigator maps to search for addresses (Optional Maps, page 9).1From the app drawer, select Where To? > Addresses.2Select the country or state, if necessary.3Enter the city or postal code.NOTE: Not all map data provides postal code searching.4Select the city.5Enter the house number.6Enter the street.Navigating with the CompassWhen navigating to a destination, points to your destination, regardless of the direction you are moving.1Begin navigating to a destination (Navigating to a Destination, page 9).2From the app drawer, select Compass.3Turn until points toward the top of the compass, and continue moving in that direction to the destination.Calibrating the CompassNOTICECalibrate the electronic compass outdoors. To improve heading accuracy, do not stand near objects that influence magnetic fields, such as vehicles, buildings, and overhead power lines.Your device was already calibrated at the factory, and the device uses automatic calibration by default. If you experience irregular compass behavior, for example, after moving long distances or after extreme temperature changes, you can manually calibrate the compass.1From the app drawer, select Compass.2Select > Calibrate Compass > Start.3Follow the on-screen instructions.Course PointerThe course pointer is most useful when you are navigating to your destination in a straight line, such as when you are navigating on water. It can help you navigate back to the course line when you go off-course to avoid obstacles or hazards.To enable the course pointer, from the app drawer, select Setup > Heading > Go To Line (Pointer) > Course (CDI).ÀCourse line pointer. Indicates the direction of the desired course line from your starting point to your next waypoint.ÁCourse deviation indicator (CDI). Indicates the location of the desired course line in relation to your location. If the CDI is aligned with the course line pointer, you are on course.ÂCourse deviation distance. The dots indicate your distance off course. The distance represented by each dot is indicated by the scale in the upper-right corner.ÃTo-and-from indicator. Indicates whether you are headed to or from the next waypoint.Navigating with Sight 'N GoYou can point the device at an object in the distance with the compass direction locked in, project the object as a waypoint, and navigate using the object as a reference point.1From the app drawer, select Sight 'N Go.2Point the device at an object.3Select Lock Direction > Set Course.4Navigate using the compass.Navigation 9DRAFT
Elevation PlotBy default, the elevation plot displays the elevation over the distance traveled. The top chart displays the full track, and the bottom chart can display a portion of the track. You can touch any point on either chart to view details about that point. You can customize the elevation settings (Altimeter Settings, page 16).Navigating to a Point on the Elevation Plot1From the app drawer, select Altimeter.2Select an individual point on the plot.3Select .4Select View Map.5Navigate using the map (Navigating with the Map, page 9) or compass (Navigating with the Compass, page 9).Changing the Plot TypeYou can change the elevation plot to display pressure and elevation over time or distance.1From the app drawer, select Altimeter.2Select > Altimeter Setup > Plot Type3Select plot type.Resetting the Elevation Plot1From the app drawer, select Altimeter.2Select > Reset > Clear Current Activity > Clear.Calibrating the Barometric AltimeterYou can manually calibrate the barometric altimeter if you know the correct elevation or the correct barometric pressure.1Go to a location where the elevation or barometric pressure is known.2From the app drawer, select Altimeter.3Select > Altimeter Setup > Calibrate Altimeter.4Follow the on-screen instructions.WaypointsWaypoints are locations you record and store in the device. Waypoints can mark where you are, where you are going, or where you have been. You can add details about the location, such as name, elevation, and depth.You can add a .gpx file that contains waypoints by transferring the file to the GPX folder (Transferring Files to Your Device, page 18).Marking Your Current Location as a WaypointYou can mark your current location as a waypoint.1From the app drawer, select Mark Waypoint.2Select the symbol, the name, or the notes field to add details about the waypoint (optional).3Select for more waypoint options (optional).4Select Save.Finding a Waypoint1From the app drawer, select Waypoint Manager.2If necessary, select to narrow the search.3If necessary, select an option:• Select Spell Search to search using the name of the waypoint.• Select Select Symbol to search using the symbol of the waypoint.• Select Search Near to search near a recently found location, another waypoint, your current location, or a point on the map.• Select Sort to view the list of waypoints based on nearest distance or alphabetical order.4Select a waypoint from the list.Editing a WaypointBefore you can edit a waypoint, you must create a waypoint.1From the app drawer, select Waypoint Manager.2Select a waypoint.3Select an item to edit, such as the name.4Enter the new information, and select .Deleting a Waypoint1From the app drawer, select Waypoint Manager.2Select a waypoint.3Select > Delete.Increasing the Accuracy of a Waypoint LocationYou can refine the accuracy of a waypoint location by averaging the location data. When averaging, the device takes several GPS readings at the same location and uses the average value to provide more accuracy.1From the app drawer, select Waypoint Averaging.2Select a waypoint.3Move to the waypoint location.4Select Start.5Follow the on-screen instructions.6When the confidence status bar reaches 100%, select Save.For best results, collect four to eight samples for the waypoint, waiting at least 90 minutes between samples.Projecting a WaypointYou can save a new location by projecting the distance and bearing from a marked location to a new location.1From the app drawer, select Waypoint Manager.2Select a waypoint.3Select > Project Waypoint.4Enter the bearing, and select .5Select a unit of measure.6Enter the distance, and select .7Select Save.RoutesA route is a sequence of waypoints or locations that leads you to your final destination.Creating a Route Using Route PlannerA route can include many waypoints, and it should include at least a starting point and one destination.1From the app drawer, select Route Planner > Create Route > Select First Point.2Select a category.3Select the first point in the route.4Select Use.5Select Select Next Point to add additional points to the route.10 WaypointsDRAFT
6Select to save the route.Creating a Route Using the Map1From the app drawer, select Route Planner > Create Route > Select First Point > Use Map.2Select a point on the map.3Select Use.4Move the map, and select additional points on the map to add to the route.5Select .Editing the Name of a RouteYou can customize the name of a route to make it distinct.1From the app drawer, select Route Planner.2Select a route.3Select Change Name.4Enter the new name.Editing a RouteYou can add, remove, or rearrange points on a route.1From the app drawer, select Route Planner.2Select a route.3Select Edit Route.4Select a point.5Select an option:• To view the point on the map, select Review.• To change the order of the points on the route, select Move Up or Move Down.• To insert an additional point on the route, select Insert.The additional point is inserted before the point you are editing.• To remove the point from the route, select Remove.6Select to save the route.Viewing a Route on the Map1From the app drawer, select Route Planner.2Select a route.3Select View Map.Deleting a Route1From the app drawer, select Route Planner.2Select a route.3Select Delete Route.Viewing the Active Route1While navigating a route, from the app drawer, select Active Route.2Select a point in the route to view additional details.Reversing a RouteYou can switch the start and end points of your route to navigate the route in reverse.1From the app drawer, select Route Planner.2Select a route.3Select Reverse Route.Viewing the Elevation Plot of a RouteThe elevation plot displays the elevations for a route based on your route setting. If your device is configured for direct routing, the elevation plot displays the straight-line elevations between route points. If your device is configured for on-road routing, the elevation plot displays the elevations along the roads included in your route.1From the app drawer, select Route Planner.2Select a route.3Select Elevation Plot.Garmin AdventuresYou can create adventures to share your journeys with family, friends, and the Garmin community. Group related items together as an adventure. For example, you can create an adventure for your latest hiking trip. The adventure could contain the track log of the trip, photos of the trip, and geocaches you hunted. You can use BaseCamp™ to create and manage your adventures. For more information, go to http://adventures.garmin.com.Sending Files to BaseCamp1Open BaseCamp.2Connect the device to your computer.On Windows® computers, the device appears as a removable drive or a portable device, and the memory card may appear as a second removable drive. On Mac® computers, the device and memory card appear as mounted volumes.NOTE: Some computers with multiple network drives may not display device drives properly. See your operating system documentation to learn how to map the drive.3Open the Garmin or memory card drive or volume.4Select an option:• Select an item from a connected device and drag it to My Collection or to a list.• From BaseCamp, select Device > Receive from Device, and select the device.Creating an AdventureBefore you can create an adventure and send it to your device, you must download BaseCamp to your computer and transfer a track from your device to your computer (Sending Files to BaseCamp, page 11).1Open BaseCamp.2Select File > New > Garmin Adventure.3Select a track, and select Next.4If necessary, add items from BaseCamp.5Complete the required fields to name and describe the adventure.6If you want to change the cover photo for the adventure, select Change, and select a different photo.7Select Finish.Starting an AdventureBefore you can start an adventure, you must download an adventure from Garmin Connect (Using Garmin Connect, page 13), or send an adventure from BaseCamp to your device (Sending Files to BaseCamp, page 11).When you start a saved adventure, the device follows the saved track and displays shortcuts to related information along the track, such as photos and waypoints.1From the app drawer, select Adventures.2Select an adventure.3Select Start.Garmin Adventures 11DRAFT
Camera and PhotosNOTE: This feature is available only for models that include a camera.When you take a photo, the geographic location is saved with the photo information. You can navigate to the location.Taking a Photo1From the app drawer, select Camera.2Turn the device horizontally or vertically to change the orientation of the photo.3If necessary, select to turn on the flash.TIP: You can select Auto to use the flash only when the camera detects a low light scene.4If necessary, use two fingers on the touchscreen to zoom in or out.5Hold to focus and hold the device still.A white frame appears on the screen. The device focuses on the object inside of the frame. When the photo is in focus, the frame turns green.6Release to take a photo.ApplicationsSending and Receiving Data WirelesslyBefore you can share data wirelessly, you must be within 3 m (10 ft.) of a compatible device.Your device can send and receive data when paired with another compatible device using Bluetooth or ANT+® wireless technology. You can share waypoints, geocaches, routes, tracks, photos, and custom maps.1From the app drawer, select Share Wirelessly.2Select an option:• Select Send, and select a type of data.• Select Receive to receive data from another device. The other compatible device must be attempting to send data.3Follow the on-screen instructions.Setting a Proximity AlarmProximity alarms alert you when you are within a specified range of a particular location.1From the app drawer, select Proximity Alarms > Create Alarm.2Select a category.3Select a location.4Select Use.5Enter a radius, and select .When you enter an area with a proximity alarm, the device sounds a tone.TIP: You can configure separate alarm tones for when you enter and leave an area.Calculating the Size of an Area1From the app drawer, select Area Calculation > Start.2Walk around the perimeter of the area you want to calculate.3Select Calculate when finished.Viewing the Calendar and AlmanacsYou can view device activity, such as when a waypoint was saved. You can also view daily almanac information for the sun and moon, and hunting and fishing.1From the app drawer, select an option:• To view device activity for specific days, select Calendar.• To view the sunrise, sunset, moonrise, and moonset information, select Sun and Moon.• To view the predicted best times for hunting and fishing, select Hunt and Fish.2If necessary, select or to view a different month.3Select a day.Setting an Alarm1From the app drawer, select Alarm Clock.2Select and to set the time.3Select Turn Alarm On.4Select an option.The alarm sounds at the selected time. If the device is off at the alarm time, the device turns on and sounds the alarm.Starting the Countdown Timer1From the app drawer, select Alarm Clock > > Timer.2Select and to set the time.3Select Start Timer.Opening the StopwatchFrom the app drawer, select Stopwatch.Satellite PageThe satellite page shows your current location, GPS accuracy, satellite locations, and signal strength.Changing the Satellite View1From the app drawer, select Satellite.2Select .3Select an option:• To orient the satellite view with your current track toward the top of the screen, select Track Up.• To show a unique color for each satellite and its signal strength bar, select Multicolor.Turning Off GPSYou can turn off GPS on your device to stop tracking your location.1From the app drawer, select Satellite.2Select > Use With GPS Off.Simulating a LocationYou can use the device with GPS off to perform maintenance on waypoints and routes, or to conserve battery life. You can set the location manually to view your current location on the map.1From the app drawer, select Satellite > > Use With GPS Off.2Select > Set Location On Map.3Select a location.4Select Use.Controlling a VIRB® Action CameraBefore you can use the VIRB remote function, you must enable the remote control setting on your VIRB camera. For more information, see the owner's manual for your VIRB camera.1Turn on your VIRB camera, and enable the remote control setting.2On your device, from the app drawer, select VIRB Remote.3Wait while the device connects with your VIRB camera.12 Camera and PhotosDRAFT
4Select an option:• To record video, drag the slider bar up.• To take a photo, select .Phone NotificationsNOTE: This feature is not available for all device models.Phone notifications require a compatible smartphone to be paired with the device. When your phone receives messages, it sends notifications to your device.Hiding NotificationsNotifications are enabled by default when you pair your device with a compatible smartphone. You can hide notifications so they do not appear on your device screen.1From the app drawer, select Setup > Bluetooth.2If necessary, select Bluetooth if it is not turned on.3Select Notifications to turn off notifications on the device.FitnessHistoryHistory includes date, time, distance, calories, average speed or pace, ascent, descent, and optional ANT+ sensor information.NOTE: History is not recorded while the timer is stopped or paused.When the device memory is full, a message appears. The device does not automatically delete or overwrite your history. You can upload your history to Garmin Connect (Using Garmin Connect, page 13) or BaseCamp (Garmin Adventures, page 11) periodically to keep track of all your activity data.Viewing an Activity HistoryFrom the history, you can view details about a previous activity.1From the app drawer, select Activity History.2Select an activity.Deleting an Activity from Your History1From the app drawer, select Activity History.2Select an activity.3Select > Delete.Using Garmin Connect1Connect the device to your computer using the USB cable.2Go to www.garminconnect.com/start.3Follow the on-screen instructions.Optional Fitness AccessoriesYou can use optional fitness accessories including a heart rate monitor or a cadence sensor with your device. These accessories use ANT+ wireless technology to send data to the device.Before you can use the fitness accessory with your device, you must install the accessory according to the instructions included with the accessory.Pairing Your ANT+ SensorsBefore you can pair, you must put on the heart rate monitor or install the sensor.Pairing is the connecting of ANT+ wireless sensors, for example, connecting a heart rate monitor with your device.1Bring the device within 3 m (10 ft.) of the sensor.NOTE: Stay 10 m (30 ft.) away from other ANT+ sensors while pairing.2From the app drawer, select Setup > ANT Sensor.3Select your sensor.4Select Search for New.When the sensor is paired with your device, the sensor status changes from Searching to Connected.Tips for Pairing ANT+ Accessories with Your Garmin Device• Verify that the ANT+ accessory is compatible with your Garmin device.• Before you pair the ANT+ accessory with your Garmin device, move 10 m (32.9 ft.) away from other ANT+ accessories.• Bring the Garmin device within range 3 m (10 ft.) of the ANT+ accessory.• After you pair the first time, your Garmin device automatically recognizes the ANT+ accessory each time it is activated. This process occurs automatically when you turn on the Garmin device and only takes a few seconds when the accessories are activated and functioning correctly.• When paired, your Garmin device receives data from only your accessory, and you can go near other accessories.About Heart Rate ZonesMany athletes use heart rate zones to measure and increase their cardiovascular strength and improve their level of fitness. A heart rate zone is a set range of heartbeats per minute. The five commonly accepted heart rate zones are numbered from 1 to 5 according to increasing intensity. Generally, heart rate zones are calculated based on percentages of your maximum heart rate.Fitness GoalsKnowing your heart rate zones can help you measure and improve your fitness by understanding and applying these principles.• Your heart rate is a good measure of exercise intensity.• Training in certain heart rate zones can help you improve cardiovascular capacity and strength.• Knowing your heart rate zones can prevent you from overtraining and can decrease your risk of injury.If you know your maximum heart rate, you can use the table (Heart Rate Zone Calculations, page 23) to determine the best heart rate zone for your fitness objectives.If you do not know your maximum heart rate, use one of the calculators available on the Internet. Some gyms and health centers can provide a test that measures maximum heart rate. The default maximum heart rate is 220 minus your age.Setting Your Heart Rate ZonesBefore the device can determine your heart rate zones, you must set up your fitness user profile (Setting Your Fitness User Profile, page 16).You can manually adjust the heart rate zones according to your fitness goals (Fitness Goals, page 13).1From the app drawer, select Setup > Fitness > HR Zones.2Enter the maximum and minimum heart rate for zone 5.The maximum heart rate for each zone is based on the minimum heart rate of the previous zone. For example, if you enter 167 as a minimum heart rate for zone 5, the device uses 166 as the maximum rate for zone 4.3Enter your minimum heart rate for zones 4-1.Customizing the DeviceAdjusting the Backlight BrightnessYou can adjust the backlight brightness to maximize the battery life.1Swipe down from the top of the screen.2Select or .Fitness 13DRAFT
Customizing the KeysYou can customize some device key actions to provide quick access to menus, settings, apps, or other device functions.1From the app drawer, select Setup > System > Configure Keys.2Select Power Key or Call Key.3Select Single Tap, Double Tap, or Hold.4Select an option.Customizing the Main MenuYou can change the layout of the main menu.1From the app drawer, select Setup > Main Menu.2Select an option:• To switch to a different page of the main menu, select and .• To change the number of items on a main menu page, select and .• To set the current page of the main menu as the starting page, select > Set as Start Page.Changing Items on the Main MenuYou can add, remove, and change the order of items on the main menu.1From the app drawer, select Setup > Main Menu.2If necessary, increase the number of items on the main menu, or switch to a different page of the main menu (Customizing the Dashboard on the Main Menu, page 14).3Select an option:• To add an item to the main menu, select Add Item Here, and select an item.• To move an item on the main menu, select the item, and select Move Item Here.• To delete an item on the main menu, select the item, and select .Customizing the Dashboard on the Main MenuBy default, radio information appears in the dashboard on the main menu. You can change the information shown in this dashboard.1From the app drawer, select Setup > Main Menu.2Select > Change Dashboards.3Select a dashboard.Customizing the App DrawerYou can add, remove, and change the order of items in the app drawer.1From the app drawer, select Setup > Main Menu > > Setup Drawer.2Select an option:• To add an item to the app drawer, select Add and select an item.• To move an item in the app drawer, select the item, and select another item to switch positions.• To delete an item from the app drawer, select the item, and select .NOTE: Some items cannot be deleted from the app drawer.Adding a Shortcut to the Main MenuYou can add shortcuts to the application drawer, or to the main menu or favorites dashboard when the device is in classic mode. You can create shortcuts to enable the device to perform multiple actions simultaneously. If the shortcut does not appear in the list, you can create it (Creating a Shortcut, page 14).1From the app drawer, select Setup > Shortcuts.2Select the shortcut.3Select Add to Menu.4Select Main Menu, Drawer, or Favorites.Creating a Shortcut1From the app drawer, select Setup > Shortcuts > Create Shortcut.2Select Name, and enter a name.3Select Icon, and select an icon.4Select an option:• To add a shortcut to a specific device setting. select Setup.• To add a shortcut that begins navigation to a specific waypoint, select Where To?.• To add a shortcut to a specific application, select Application.• To allow a shortcut to quickly change your activity, select Activity.Custom Data Fields and DashboardsData fields display information about your location or other specified data. Dashboards are a custom grouping of data that can be helpful to a specific or general task, such as geocaching.Enabling the Map Data FieldsYou can show custom data fields on the map.1From the map, select > Setup Map > Dashboard.2Select Large Data Field or Small Data Fields.3If necessary, on the map, select at the top of the screen to show the data fields.Customizing the Data FieldsBefore you can change the map data fields, you must enable them (Enabling the Map Data Fields, page 14).You can customize the data fields and dashboards of the map, compass, trip computer, elevation plot, and status pages.1From a page that displays data fields, select a data field.2Select a data field category and a data field.For example, select Trip Data > Speed - Moving Avg..Customizing Dashboards1Select a page.2Select an option:• From the map, select > Setup Map > Dashboard.• From the compass or trip computer, select > Change Dashboard.3Select a dashboard.Setting the Touchscreen SensitivityYou can adjust the touchscreen sensitivity to suit your activity.1From the app drawer, select Setup > Accessibility > Touch Sensitivity.2Select an option.TIP: You can test the touchscreen settings with and without gloves based on your activity.Display SettingsFrom the app drawer, select Setup > Display.Backlight Timeout: Sets the length of time before the backlight turns off.14 Customizing the DeviceDRAFT
Orientation Lock: Locks the screen orientation in portrait or landscape mode, or allows the screen to change orientation automatically based on the device orientation.Screen Capture: Allows you to save the image on the device screen.Battery Save: Saves the battery power and prolongs the battery life by turning off the screen when the backlight times out (Turning On Battery Save Mode, page 1).Configuring the MapsYou can enable or disable the maps currently loaded on the device.From the app drawer, select Setup > Map > Configure Maps.Map SettingsFrom the app drawer, select Setup > Map.Orientation: Adjusts how the map is shown on the page. The North Up option shows north at the top of the page. The Track Up option shows your current direction of travel toward the top of the page. The Automotive Mode option shows an automotive perspective with the direction of travel at the top.Dashboard: Sets a dashboard to display on the map. Each dashboard shows different information about your route or your location.Guidance Text: Sets when the guidance text is shown on the map.Map Speed: Adjusts the speed at which the map is drawn. A faster map drawing speed decreases the battery life.Advanced Map SettingsFrom the app drawer, select Setup > Map > Advanced Setup.Detail: Sets the amount of detail shown on the map. Showing more detail may cause the map to redraw more slowly.Shaded Relief: Shows detail relief on the map (if available) or turns off shading.Vehicle: Sets the position icon, which represents your position the map. The default icon is a small blue triangle.Zoom Controls: Sets the auto zoom and the location of the buttons in portrait or landscape mode.Zoom Levels: Adjusts the zoom level at which map items appear. The map items do not appear when the map zoom level is higher than the selected level.Text Size: Sets the text size for map items.System SettingsFrom the app drawer, select Setup > System.Satellite: Allows you to adjust the satellite system settings (Satellite Settings, page 15).Text Language: Sets the text language on the device.NOTE: Changing the text language does not change the language of user-entered data or map data.Interface: Sets the communication interface mode to Garmin Spanner, Garmin Serial, NMEA In/Out, Text Out, RTCM, or MTP.Configure Keys: Sets the power key or user key as a shortcut to a menu, setting, or application.Mode: Sets the home screen to look like a classic outdoor handheld device home screen or an activity-based home screen.NOTE: This device is set to Classic by default. Changing this setting to Activity significantly alters the user interface, radio features, and activity recording features.Battery Type: Sets the battery type for the device.Satellite SettingsFrom the app drawer, select Setup > System > Satellite.Satellite System: Allows you to set the satellite system to GPS, GPS + GLONASS (GPS and GLONASS, page 15), or Demo Mode (GPS off).WAAS/EGNOS: Sets the satellite system to Wide Area Augmentation System/European Geostationary Navigation Overlay Service (WAAS/EGNOS). For more information about WAAS, go to www.garmin.com/aboutGPS/waas.html.GPS and GLONASSThe default satellite system setting is GPS + GLONASS, which offers increased performance in challenging environments and faster position acquisition. Using GPS and GLONASS can reduce battery life more quickly than using GPS only.Appearance SettingsFrom the app drawer, select Setup > Appearance.Mode: Sets a light background, a dark background, or automatically switches between the two based on the sunrise and sunset time for your current location.Day Color: Sets the color for the selections made when in day mode.Night Color: Sets the color for the selections made when in night mode.Landscape Controls: Places the controls on the left or right side of the screen when in landscape mode.Setting the Device TonesYou can customize tones for messages, keys, turn warnings, and alarms.1From the app drawer, select Setup > Tones > Tones > On.2Select a tone for each audible type.Routing SettingsThe available routing settings vary based on the activity selected.From the app drawer, select Setup > Routing.Activity: Sets an activity used for transportation while routing. The device calculates routes optimized for the type of activity you are doing.Calculation Method: Sets the method used to calculate your route.Lock On Road: Locks the blue triangle, which represents your position on the map, onto the nearest road. This is most useful when driving or navigating on roads.Off Route Recalculation: Sets recalculation preferences when navigating away from an active route.Avoidance Setup: Sets the types of roads, terrain, and transportation methods to avoid while navigating.Route Transitions: Sets how the device routes from one point on the route to the next. This setting is available only for some activities. The Distance option routes you to the next point on the route when you are within a specified distance of your current point.Heading SettingsYou can customize the compass settings.From the app drawer, select Setup > Heading.Display: Sets the type of directional heading shown on the compass.North Reference: Sets the north reference used on the compass.Customizing the Device 15DRAFT
Go To Line (Pointer): Allows you to use the bearing pointer that points in the direction of your destination, or use the course pointer that shows your relationship to the course line leading to the destination.Compass: Automatically switches from an electronic compass to a GPS compass when you are traveling at a higher rate of speed for a period of time.Calibrate Compass: Allows you to calibrate the compass if you experience irregular compass behavior, for example, after moving long distances or after extreme temperature changes (Calibrating the Compass, page 9).Altimeter SettingsFrom the app drawer, select Setup > Altimeter.Auto Calibration: Automatically calibrates the altimeter each time an activity is started. The device continues to automatically calibrate the altimeter as long as the device receives GPS signals and auto calibrate continuous is on.Barometer Mode: Variable Elevation allows the barometer to measure changes in elevation while you are moving. Fixed Elevation assumes the device is stationary at a fixed elevation, so the barometric pressure should only change due to weather.Plot Type: Allows you to view elevation changes over a period of time or distance, barometric pressure over a period of time, or ambient pressure changes over a period of time.Calibrate Altimeter: Allows you to calibrate the barometric altimeter when you know the correct elevation or the correct barometric pressure (Calibrating the Barometric Altimeter, page 10).Position Format SettingsNOTE: You should not change the position format or the map datum coordinate system unless you are using a map or chart that specifies a different position format.From the app drawer, select Setup > Position Format.Position Format: Sets the position format in which a location reading appears.Map Datum: Sets the coordinate system on which the map is structured.Map Spheroid: Shows the coordinate system the device is using. The default coordinate system is WGS 84.Changing the Units of MeasureYou can customize units of measure for distance and speed, elevation, depth, temperature, pressure, and vertical speed.1From the app drawer, select Setup > Units.2Select a measurement type.3Select a unit of measure.Time SettingsFrom the app drawer, select Setup > Time.Time Format: Sets the device to show time in a 12-hour or 24-hour format.Time Zone: Sets the time zone for the device. Automatic sets the time zone automatically based on your GPS position.Geocaching SettingsFrom the app drawer, select Setup > Geocaching.Geocaching Live: Sets the device to display or hide live geocache data.Geocache Style: Sets the device to display the geocache list using names or codes.chirp Searching: Allows the device to search for a geocache containing a chirp accessory (Enabling chirp Searching, page 7).Program chirp: Programs the chirp accessory. See the chirp Owner's Manual at www.garmin.com.Filter Setup: Allows you to create and save custom filters for geocaches (Saving a Custom Geocache Filter, page 7).Found Geocaches: Allows you to edit the number of geocaches found. This number automatically increases when you log a find (Logging the Attempt, page 6).ANT+ Sensor SettingsFor more information about optional fitness accessories, see Optional Fitness Accessories, page 13.Fitness SettingsFrom the app drawer, select Setup > Fitness.Auto Lap: Sets the device to automatically mark the lap at a specific distance.Activity Type: Sets the fitness activity to hiking, running, cycling, and more. This allows your activity to appear as the correct type when you transfer it to Garmin Connect.User: Sets the user profile information (Setting Your Fitness User Profile, page 16).HR Zones: Sets the five heart rate zones for fitness activities.Setting Your Fitness User ProfileThe device uses information that you enter about yourself to calculate accurate data. You can modify user profile information such as gender, age, weight, height, and lifetime athlete (About Lifetime Athletes, page 16).1From the app drawer, select Setup > Fitness > User.2Modify the settings.About Lifetime AthletesA lifetime athlete is an individual who has trained intensely for many years (with the exception of minor injuries) and has a resting heart rate of 60 beats per minute (bpm) or less.Marking Laps by DistanceYou can use the Auto Lap® feature to automatically mark the lap at a specific distance. This feature is helpful for comparing your performance over different parts of an activity.1From the app drawer, select Setup > Fitness > Auto Lap.2Enter a value, and select .Marine SettingsFrom the app drawer, select Setup > Marine.Marine Chart Mode: Sets the type of chart the device uses when displaying marine data. Nautical displays various map features in different colors so the marine POIs are more readable and so the map reflects the drawing scheme of paper charts. Fishing (requires marine maps) displays a detailed view of bottom contours and depth soundings and simplifies map presentation for optimal use while fishing.Appearance: Sets the appearance of marine navigation aids on the map.Marine Alarm Setup: Sets alarms for when you exceed a specified drift distance while anchored, when you are off course by a specified distance, and when you enter water of a specific depth.Setting Up Marine Alarms1From the app drawer, select Setup > Marine > Marine Alarm Setup.2Select an alarm type.16 Customizing the DeviceDRAFT
3Select On.4Enter a distance, and select .Resetting Data and SettingsYou can reset trip data, delete all waypoints, clear the current track, or restore default values.1From the app drawer, select SetupReset.2Select an option:• To reset data specific to a trip, such as distance and averages, select Reset Trip Data.• To delete all saved waypoints, select Delete All Waypoints.• To clear the data recorded since you started your current activity, select Clear Current Activity.NOTE: The device continues to record new data for the current activity.• To reset the settings for your current activity type to the factory default values, select Reset Activity Settings.• To restore all device settings to the factory default values, select Reset All Settings.NOTE: Resetting all settings clears all geocaching activity from your device.Restoring Default Values for Specific SettingsYou can restore the default values for specific settings categories.1From the app drawer, select Setup.2Select a category to restore.3Select > Restore Defaults.Restoring Default Values for Specific Page SettingsYou can restore the default values for settings for the map, compass, trip computer, and elevation plot.1Open the page for which you will restore the settings.2Select > Restore Defaults.Restoring All Default SettingsYou can reset all settings back to the factory default settings.From the app drawer, select Setup > Reset > Reset All Settings > Reset.NOTE: Restoring all default settings on your device clears your geocaching registration and all default activities.Device InformationAttaching the Carabiner Clip1Position the carabiner clip À in the slots on the mounting spine Á of the device.2Slide the carabiner clip up until it locks in place.Headsets and MicrophonesThis device is compatible with many headset and microphone accessories that connect using a 2.5 mm jack (Device Overview, page 1).By default, the device is set to detect automatically when a new headset or microphone is connected.NOTE: When connecting a headset with a push to talk (PTT) button, you must press the PTT button after connecting the headset for the device to detect the headset.This device is compatible with Voice Operated Transmission (VOX) devices. These accessories allow you to use the device hands-free by transmitting automatically when a voice is detected. You can adjust the sensitivity level of connected VOX devices (Advanced Radio Setup, page 5).Support and UpdatesGarmin Express™ (www.garmin.com/express) provides easy access to these services for Garmin devices.• Product registration• Product manuals• Software updates• Data uploads to Garmin Connect• Map, chart, or course updatesDevice CareNOTICEDo not store the device where prolonged exposure to extreme temperatures can occur, because it can cause permanent damage.Never use a hard or sharp object to operate the touchscreen, or damage may result.Avoid chemical cleaners, solvents, and insect repellents that can damage plastic components and finishes.Secure the weather cap tightly to prevent damage to the USB port.Cleaning the Device1Wipe the device using a cloth dampened with a mild detergent solution.2Wipe it dry.After cleaning, allow the device to dry completely.Cleaning the Touchscreen1Use a soft, clean, lint-free cloth.2If necessary, lightly dampen the cloth with water.3If using a dampened cloth, turn off the device and disconnect the device from power.4Gently wipe the screen with the cloth.Water ImmersionNOTICEThe device is water resistant to IEC Standard 60529 IPX7. It can withstand immersion in 1 meter of water for 30 minutes. Prolonged submersion can cause damage to the device. After submersion, be certain to wipe dry and air dry the device before using or charging.Data ManagementNOTE: The device is not compatible with Windows 95, 98, Me, Windows NT®, and Mac OS 10.3 and earlier.File TypesThe handheld device supports these file types:• Files from BaseCamp or HomePort™. Go to www.garmin.com/trip_planning.• GPX track files.• GPX geocache files (Downloading Geocaches Using a Computer, page 7).• JPEG photo files.Device Information 17DRAFT
• GPI custom POI files from the Garmin POI Loader. Go to www.garmin.com/products/poiloader.• FIT files for exporting to Garmin Connect.Installing a Memory CardYou can install a microSD memory card for additional storage or pre-loaded maps.1Turn the D-ring counter-clockwise, and pull up to remove the battery pack.2In the battery compartment, slide the card holder toward the top of the device, and lift up.3Place the memory card with the contacts facing down.4Close the card holder.5Slide the card holder toward the bottom of the device to lock it.6Replace the battery pack, and turn the D-ring clockwise.Connecting the Device to Your ComputerNOTICETo prevent corrosion, thoroughly dry the USB port, the weather cap, and the surrounding area before charging or connecting to a computer.1Pull up the weather cap from the USB port.2Plug the small end of the USB cable into the USB port on the device.3Plug the large end of the USB cable into a computer USB port.Your device and memory card (optional) appear as removable drives in My Computer on Windows computers and as mounted volumes on Mac computers.Transferring Files to Your Device1Connect the device to your computer.On Windows computers, the device appears as a removable drive or a portable device, and the memory card may appear as a second removable drive. On Mac computers, the device and memory card appear as mounted volumes.NOTE: Some computers with multiple network drives may not display device drives properly. See your operating system documentation to learn how to map the drive.2On your computer, open the file browser.3Select a file.4Select Edit > Copy.5Open the portable device, drive, or volume for the device or memory card.6Browse to a folder.7Select Edit > Paste.The file appears in the list of files in the device memory or on the memory card.Deleting FilesNOTICEIf you do not know the purpose of a file, do not delete it. Your device memory contains important system files that should not be deleted.1Open the Garmin drive or volume.2If necessary, open a folder or volume.3Select a file.4Press the Delete key on your keyboard.Disconnecting the USB CableIf your device is connected to your computer as a removable drive or volume, you must safely disconnect your device from your computer to avoid data loss. If your device is connected to your Windows computer as a portable device, it is not necessary to safely disconnect.1Complete an action:• For Windows computers, select the Safely Remove Hardware icon in the system tray, and select your device.• For Mac computers, drag the volume icon to the trash.2Disconnect the cable from your computer.SpecificationsBattery type Lithium-ion battery pack or four AA batteries (NiMH, alkaline, or lithium)Battery life Lithium-ion battery pack: up to 14 hours of typical usage.AA batteries: up to 18 hours of typical usage.Water rating IEC 60529 IPX7*Operating temperature rangeFrom -20º to 55ºC (from -4º to 131ºF)Charging temperature rangeFrom 0º to 40°C (from 32º to 104°F)Communication frequency/protocol2.4 GHz ANT+ wireless communications protocolBluetooth enabled deviceRadio channels 1 through 7: GMRS and FRS channels (requires FCC license in the United States)8 through 14: FRS channels15 through 22: GMRS channels (requires FCC license in the United States)15R through 22R: GMRS repeater channels (requires FCC license in the United States) (position reporting is not allowed by the FCC on repeater channels)Channels WX 1 through 7: weather radio channelsRadio output power FRS: 0.5 WGMRS: 0.5, 2.0, or 5.0 W (5.0 W is available only in the US, and only when using the Lithium-ion battery pack. )*The device withstands incidental exposure to water of up to 1 m for up to 30 min. For more information, go to www.garmin.com/waterrating.Radio Frequency ChartsFRS/GMRS Radio FrequenciesRino models sold in the United States and Canada use these frequencies.NOTE: If you plan to use this device in countries outside of the United States or Canada, you should check with the government of that country for any restrictions on FRS or GMRS use.18 Device InformationDRAFT
Channel NumberTransmit Frequency (MHz)Receive Frequency (MHz)Channel Description1 462.5625 462.5625 GMRS Interstitial 1, FRS 12 462.5875 462.5875 GMRS Interstitial 2, FRS 23 462.6125 462.6125 GMRS Interstitial 3, FRS 34 462.6375 462.6375 GMRS Interstitial 4, FRS 45 462.6625 462.6625 GMRS Interstitial 5, FRS 56 462.6875 462.6875 GMRS Interstitial 6. FRS 67 462.7125 462.7125 GMRS Interstitial 7, FRS 78 467.5625 467.5625 FRS-89 467.5875 467.5875 FRS-910 467.6125 467.6125 FRS-1011 467.6375 467.6375 FRS-1112 467.6625 467.6625 FRS-1213 467.6875 467.6875 FRS-1314 467.7125 467.7125 FRS-1415 462.5500 462.5500 GMRS Primary 116 462.5750 462.5750 GMRS Primary 217 462.6000 462.6000 GMRS Primary 318 462.6250 462.6250 GMRS Primary 419 462.6500 462.6500 GMRS Primary 520 462.6750 462.6750 GMRS Primary 621 462.7000 462.7000 GMRS Primary 722 462.7250 462.7250 GMRS Primary 815R 467.5500 462.5500 GMRS Repeater 116R 467.5750 462.5750 GMRS Repeater 217R 467.6000 462.6000 GMRS Repeater 318R 467.6250 462.6250 GMRS Repeater 419R 467.6500 462.6500 GMRS Repeater 520R 467.6750 462.6750 GMRS Repeater 621R 467.7000 462.7000 GMRS Repeater 722R 467.7250 462.7250 GMRS Repeater 8CBRS/PRS Radio FrequenciesRino models sold in Australia and New Zealand use these frequencies.NOTE: If you plan to use this device in countries outside of Australia or New Zealand, you should check with the government of that country for any restrictions on FRS or GMRS use.Channel NumberTransmit Frequency (MHz)Receive Frequency (MHz)Channel Description1 476.4250 476.42502 476.4500 476.45003 476.4750 476.47504 476.5000 476.50005 476.5250 476.5250 Emergency channel: reserved6 476.5500 476.55007 476.5750 476.57508 476.6000 476.60009 476.6250 476.625010 476.6500 476.6500Channel NumberTransmit Frequency (MHz)Receive Frequency (MHz)Channel Description11 476.6750 476.675012 476.7000 476.700013 476.7250 476.725014 476.7500 476.750015 476.7750 476.775016 476.8000 476.800017 476.8250 476.825018 476.8500 476.850019 476.8750 476.875020 476.9000 476.900021 476.9250 476.925022 476.9500 476.9500 Telemetry and telecommand channel. GPS position data is transmitted on this channel, and audio transmissions are not possible.23 476.9750 476.9750 Telemetry and telecommand channel. GPS position data is transmitted on this channel, and audio transmissions are not possible.24 477.0000 477.000025 477.0250 477.025026 477.0500 477.050027 477.0750 477.075028 477.1000 477.100029 477.1250 477.125030 477.1500 477.150031 477.1750 477.175032 477.2000 477.200033 477.2250 477.225034 477.2500 477.250035 477.2750 477.2750 Emergency channel: reserved36 477.3000 477.300037 477.3250 477.325038 477.3500 477.350039 477.3750 477.375040 477.4000 477.40001R 477.1750 476.4250 CBRS Repeater 12R 477.2000 476.4500 CBRS Repeater 23R 477.2250 476.4750 CBRS Repeater 34R 477.2500 476.5000 CBRS Repeater 45R 477.2750 476.5250 CBRS Repeater 56R 477.3000 476.5500 CBRS Repeater 67R 477.3250 476.5750 CBRS Repeater 78R 477.3500 476.6000 CBRS Repeater 8Weather Radio FrequenciesWeather radio broadcasts are available in the United States only.Channel Number Receive Frequency (MHz)Channel DescriptionWX 1 162.550 NOAA 1 (Weather radio)WX 2 162.400 NOAA 2 (Weather radio)Device Information 19DRAFT
Channel Number Receive Frequency (MHz)Channel DescriptionWX 3 162.475 NOAA 3 (Weather radio)WX 4 162.425 NOAA 4 (Weather radio)WX 5 162.450 NOAA 5 (Weather radio)WX 6 162.500 NOAA 6 (Weather radio)WX 7 162.525 NOAA 7 (Weather radio)CTCSS FrequenciesCTCSS frequencies and squelch codes may differ in some radios from third-party manufacturers. For the best results, you should compare CTCSS frequency information from your third-party radio with the information in this table..Channel Number Frequency (MHz)0 199.51 67.02 71.93 74.44 77.05 79.76 82.57 85.48 88.59 91.510 94.811 97.412 100.013 103.514 107.215 110.916 114.817 118.818 123.019 127.320 131.821 136.522 141.323 146.224 151.425 156.726 162.227 167.928 173.829 179.930 186.231 192.832 203.533 210.734 218.135 225.736 233.637 241.838 250.3DCS Frequency ChartDCS uses a digital signature and is not frequency-based. DCS squelch codes may differ in some radios from third-party manufacturers. For the best results, you should compare the DCS-code information for your third-party radio with the information in this table..DCS Code DCS Code DCS Code23 162 46625 165 50326 172 50631 174 51632 205 53243 271 54647 306 56551 311 60654 315 61265 331 62471 343 62772 346 63173 351 63274 364 654114 365 662115 371 664116 411 703125 412 712131 413 723132 423 731134 431 732143 432 734152 445 743155 464 754156 465FCC Licensing InformationThe Rino two-way radio operates on General Mobile Radio Service (GMRS) frequencies regulated by the Federal Communications Commission (FCC) in the United States. Operation on the GMRS frequencies is subject to rules as specified in 47 CFR Part 95.In order to transmit on GMRS frequencies, you are required to obtain a license from the FCC. An individual 18 years of age or older, who is not a representative of a foreign government, is eligible to apply for a GMRS license. To apply for a GMRS license, you need FCC Form 605 (605 Main Form and Schedule F) and FCC Form 159. Download the application forms from the FCC web site at www.fcc .gov/Forms/. You can also request them through the FCC forms hotline at 1-800-418-FORM (1-800-418-3676).File Form 605 online at http://wireless.fcc.gov/uls/. A filing fee is associated with this application.For information on fees, go to the FCC fee information web page at http://wireless.fcc.gov/feesforms/index.html or at http://wireless.fcc.gov /services/personal/generalmobile/.For questions concerning the license application, contact the FCC at 1-888-Call-FCC (1-888-225-5322).No license is required to operate on GMRS channels in Canada. However, GMRS repeater channels are not approved for use by the Canadian government.For use in countries outside of the U.S. and Canada, please check with that government for any restrictions of FRS or GMRS use.Viewing Device InformationYou can view the unit ID, software version, regulatory information, and license agreement.From the app drawer, select Setup > About.20 Device InformationDRAFT
TroubleshootingMy handheld device is not respondingIf your handheld device stops responding, you can reset the device.NOTE: This does not erase any of your data or settings.1Remove the batteries.2Reinstall the batteries (Installing the Lithium-ion Battery, page 1).My device does not turn on• Verify the battery is installed correctly (Installing the Lithium-ion Battery, page 1).• Fully charge the battery (Charging the Battery Pack, page 1).The battery gauge does not seem accurate1Allow the device to fully discharge.2Fully charge the device without interrupting the charge cycle.My phone will not connect to the device• Select Setup > Bluetooth.The Bluetooth option must be enabled.• Enable Bluetooth wireless technology on your phone and bring your phone within 10 m (33 ft.) of the device.• Go to www.garmin.com/bluetooth for more help.My device is not acquiring satellite signals• Verify the GPS simulator is turned off (Simulating a Location, page 12).• Take your device out of parking garages and away from tall buildings and trees.• Remain stationary for several minutes.My device does not go into mass storage mode automaticallyIf your device is connected to the computer but does not go into mass storage mode automatically, you might have loaded a corrupt file.1Disconnect the device from your computer.2Turn off the device.3Hold while you connect the device to your computer.4Continue holding for 30 seconds or until the device goes into mass storage mode.I need to reset all settings back to factory default valuesSelect Setup > Reset > Reset All Settings.Appendixtempe™The tempe is an ANT+ wireless temperature sensor. You can attach the sensor to a secure strap or loop where it is exposed to ambient air, and therefore, provides a consistent source of accurate temperature data. You must pair the tempe with your device to display temperature data from the tempe.Data FieldsSome data fields require you to be navigating or require ANT+ accessories to display data.24 hr Max. Temperature: The maximum temperature recorded in the last 24 hours.24 hr Min. Temperature: The minimum temperature recorded in the last 24 hours.Accuracy of GPS: The margin of error for your exact location. For example, your GPS location is accurate to within +/- 12 ft. (3.65 m).Activity Distance: The distance traveled for the current track.Alarm Timer: The current time of the countdown timer.Ambient Pressure: The uncalibrated environmental pressure.Ascent - Average: The average vertical distance of ascent since the last reset.Ascent - Maximum: The maximum rate of ascent in feet per minute or meters per minute since the last reset.Ascent - Total: The total elevation distance ascended since the last reset.Automotive Turn: The direction of the next turn in the route. You must be navigating for this data to appear.Average Cadence: The average cadence for the current activity.Average HR: The average heart rate for the current activity.Avg HR %Max.: The average percentage of maximum heart rate for the current activity.Avg Lap: The average lap time for the current activity.Barometer: The calibrated current pressure.Battery Level: The remaining battery power.Bearing: The direction from your current location to a destination. You must be navigating for this data to appear.Cadence: The number of revolutions of the crank arm or number of strides per minute. Your device must be connected to a cadence accessory for this data to appear.Calories: The amount of total calories burned.Compass Hdg.: The direction you are moving based on the compass.Course: The direction from your starting location to a destination. Course can be viewed as a planned or set route. You must be navigating for this data to appear.Current Lap: The stopwatch time for the current lap.Date: The current day, month, and year.Depth: The depth of the water. Your device must be connected to a NMEA® 0183 or NMEA 2000® device capable of acquiring the water depth.Descent - Average: The average vertical distance of descent since the last reset.Descent - Maximum: The maximum rate of descent in feet per minute or meters per minute since the last reset.Descent - Total: The total elevation distance descended since the last reset.Distance To Dest.: The remaining distance to the final destination. You must be navigating for this data to appear.Distance To Next: The remaining distance to the next waypoint on the route. You must be navigating for this data to appear.Elapsed Activity Time: The total time recorded. For example, if you start the timer and run for 10 minutes, then stop the timer for 5 minutes, then start the timer and run for 20 minutes, your elapsed time is 35 minutes.Elev Abv Ground: The altitude of your current location above ground level (if maps contain sufficient elevation information).Elevation: The altitude of your current location above or below sea level.Elevation - Maximum: The highest elevation reached since the last reset.Elevation - Minimum: The lowest elevation reached since the last reset.Troubleshooting 21DRAFT
ETA at Destination: The estimated time of day when you will reach the final destination (adjusted to the local time of the destination). You must be navigating for this data to appear.ETA at Next: The estimated time of day when you will reach the next waypoint on the route (adjusted to the local time of the waypoint). You must be navigating for this data to appear.Glide Ratio: The ratio of horizontal distance traveled to the change in vertical distance.Glide Ratio to Dest.: The glide ratio required to descend from your current position to the destination elevation. You must be navigating for this data to appear.GPS Elevation: The altitude of your current location using GPS.GPS Heading: The direction you are moving based on GPS.GPS Signal Strength: The strength of the GPS satellite signal.Grade: The calculation of rise (elevation) over run (distance). For example, if for every 10 ft. (3 m) you climb you travel 200 ft. (60 m), the grade is 5%.Heading: The direction you are moving.Heart Rate: Your heart rate in beats per minute (bpm). Your device must be connected to a compatible heart rate monitor.Heart Rate - %Max.: The percentage of maximum heart rate.Heart Rate Zone: The current range of your heart rate (1 to 5). The default zones are based on your user profile and maximum heart rate (220 minus your age).Lap Ascent: The vertical distance of ascent for the current lap.Lap Cadence: The average cadence for the current lap.Lap Descent: The vertical distance of descent for the current lap.Lap Distance: The distance traveled for the current lap.Lap Heart Rate Percent: The average percentage of maximum heart rate for the current lap.Lap HR: The average heart rate for the current lap.Laps: The number of laps completed for the current activity.Lap Speed: The average speed for the current lap.Last Lap Ascent: The vertical distance of ascent for the last completed lap.Last Lap Cadence: The average cadence for the last completed lap.Last Lap Descent: The vertical distance of descent for the last completed lap.Last Lap Distance: The distance traveled for the last completed lap.Last Lap HR: The average heart rate for the last completed lap.Last Lap Speed: The average speed for the last completed lap.Last Lap Time: The stopwatch time for the last completed lap.Location (lat/lon): The current position in latitude and longitude regardless of the selected position format setting.Location (selected): The current position using the selected position format setting.Location of Dest.: The position of your final destination. You must be navigating for this data to appear.None: This is a blank data field.Odometer: A running tally of distance traveled for all trips. This total does not clear when resetting the trip data.Off Course: The distance to the left or right by which you have strayed from the original path of travel. You must be navigating for this data to appear.Pointer: An arrow points in the direction of the next waypoint or turn. You must be navigating for this data to appear.Speed: The current rate of travel.Speed Limit: The reported speed limit for the road. Not available in all maps and in all areas. Always rely on posted road signs for actual speed limits.Speed - Maximum: The highest speed reached since the last reset.Speed - Moving Avg.: The average speed while moving since the last reset.Speed - Overall Avg.: The average speed while moving and stopped since the last reset.Stopwatch Timer: The stopwatch time for the current activity.Sunrise: The time of sunrise based on your GPS position.Sunset: The time of sunset based on your GPS position.Temperature: The temperature of the air. Your body temperature affects the temperature sensor.Temperature - Water: The temperature of the water. Your device must be connected to a NMEA 0183 device capable of acquiring the water temperature.Time of Day: The current time of day based on your current location and time settings (format, time zone, daylight saving time).Time to Destination: The estimated time remaining before you reach the destination. You must be navigating for this data to appear.Time to Next: The estimated time remaining before you reach the next waypoint in the route. You must be navigating for this data to appear.To Course: The direction in which you must move to get back on the route. You must be navigating for this data to appear.Total Lap: The stopwatch time for all the completed laps.Trip Odometer: A running tally of the distance traveled since the last reset.Trip Time: A running tally of the total time spent moving and not moving since the last reset.Trip Time - Moving: A running tally of the time spent moving since the last reset.Trip Time - Stopped: A running tally of the time spent not moving since the last reset.Turn: The angle of difference (in degrees) between the bearing to your destination and your current course. L means turn left. R means turn right. You must be navigating for this data to appear.Velocity Made Good: The speed at which you are closing on a destination along a route. You must be navigating for this data to appear.Vert Dist to Dest: The elevation distance between your current position and the final destination. You must be navigating for this data to appear.Vert Dist to Next: The elevation distance between your current position and the next waypoint in the route. You must be navigating for this data to appear.Vertical Speed: The rate of ascent or descent over time.Vertical Speed to Dest.: The rate of ascent or descent to a predetermined altitude. You must be navigating for this data to appear.Waypoint at Dest.: The last point on the route to the destination. You must be navigating for this data to appear.Waypoint at Next: The next point on the route. You must be navigating for this data to appear.22 AppendixDRAFT
Heart Rate Zone CalculationsZone % of Maximum Heart RatePerceived Exertion Benefits1 50–60% Relaxed, easy pace, rhythmic breathingBeginning-level aerobic training, reduces stress2 60–70% Comfortable pace, slightly deeper breathing, conversation possibleBasic cardiovascular training, good recovery pace3 70–80% Moderate pace, more difficult to hold conversationImproved aerobic capacity, optimal cardiovascular training4 80–90% Fast pace and a bit uncomfortable, breathing forcefulImproved anaerobic capacity and threshold, improved speed5 90–100% Sprinting pace, unsustainable for long period of time, labored breathingAnaerobic and muscular endurance, increased powerAppendix 23DRAFT
IndexAaccessories 13activities 7, 8, 13custom 8addresses, finding 9adventures 11alarmsclock 12marine 16proximity 12tones 15almanachunting and fishing 12sunrise and sunset times 12altimeter 10, 16ANT+ sensors 16pairing 13ANT+ sensors, pairing 13app drawer 2customizing 14applications 5area calculation 12Auto Lap 16Bbacklight 1, 13barometer 10BaseCamp 11, 12, 17battery 1, 18charging 1installing 1, 2maximizing 1, 13problems 21storage 1Bluetooth technology 5, 21Ccalendar 12calibratingaltimeter 10compass 9camera 12carabiner clip 17channel 3frequency 18, 19repeater 4charging 1chirp 7, 16City Navigator 9cleaning the device 17cleaning the touchscreen 17code 3, 20frequency 20compass 9navigating 9settings 15computer, connecting 18Connect IQ 5contact 4countdown timer 12customizing the device 13, 14Ddashboards 14datastoring 13transferring 13, 18data fields 5, 14, 21deletingall user data 18history 13device, care 17display settings 14downloading, geocaches 6, 7Eelevation 10plot 8, 10, 11emergency alert 4emergency alerts 4FFCC, licensing 20files, transferring 7, 12, 17, 18fitness 16GGarmin Connect 5storing data 13Garmin Expressregistering the device 17updating software 17geocaches 6, 7, 17downloading 7navigating to 6settings 16geocachesdownloading 6GLONASS 15GPS 2, 12, 15signal 12Hheading setting 15headphones 5, 17heart rate, zones 13, 23history 13sending to computer 13viewing 13HomePort 17hunting and fishing times 12IID number 20Kkeys 2, 14Llifetime athlete 16locationsediting 10saving 10locking, screen 2Mmain menu, customizing 14map settings 15maps 9, 15data fields 14navigating 9optional 9settings 15updating 17marinealarms setup 16settings 16memory card 18microphone 5, 17microSD card 1, 18. See memory cardNnavigation 9, 10compass 9course pointer 9Sight 'N Go 9stopping 9note 4notifications 13Ppairing 5ANT+ sensors 13ANT+ sensors 13phone 21peer-to-peer positioning 4phone, pairing 21photos 12taking 12position format 16power key 2product registration 7, 17profiles, user 16proximity alarms 12Rradio 3app 3contact 4note 4peer-to-peer positioning 4scan 4settings 4, 5volume 3registering the device 6, 17resetting the device 17, 21restoring, settings 17routes 10, 11creating 10, 11deleting 11editing 11settings 15viewing on the map 11Ssatellite signals 12acquiring 2locations 12scan 4screen, locking 2settings 14–17device 15sharing data 12shortcuts 14adding 14Sight 'N Go 9smartphone 5applications 5software, updating 17specifications 18squelch 3stopwatch 12storing data 18sunrise and sunset times 12system settings 15Ttempe 21temperature 18, 21time, zones and formats 16time settings 16timer 13countdown 12tones 15touchscreen 14TracBack 9tracks 8, 11training 5transferring, files 7, 11, 12, 17trip planner. See routestroubleshooting 17, 21Uunit ID 20units of measure 16USB 21connector 1disconnecting 18mass storage mode 17, 21transferring files 17user data, deleting 18user profile 16VVIRB Remote 12Wwater resistance 17waypoints 9, 10deleting 10editing 10projecting 1024 IndexDRAFT
saving 10weather 5, 6radio 5, 6Where To? 9widgets 5Zzones, heart rate 13Index 25DRAFT
www.garmin.com/support1800 235 822 +43 (0) 820 220230+ 32 2 672 52 54 0800 770 49601-866-429-9296 +385 1 5508 272+385 1 5508 271+420 221 985466+420 221 985465 + 45 4810 5050+ 358 9 6937 9758 + 331 55 69 33 99+ 39 02 36 699699 (+52) 001-855-792-76710800 427 652 0800 0233937+47 815 69 555 00800 4412 454+44 2380 662 915+35 1214 447 460 +386 4 27 92 5000861 GARMIN (427 646)+27 (0)11 251 9800 +34 93 275 44 97+ 46 7744 52020 +886 2 2642-9199 ext 20808 238 0000+44 870 850 1242+49 (0) 89 858364880zum Ortstarif - Mobilfunk kann abweichen913-397-82001-800-800-1020© 2016 Garmin Ltd. or its subsidiariesDRAFT

Navigation menu