Contents
- 1. Users Manual
- 2. Users Manual_Statement
Users Manual
Specification Control Document Drawing Number: Description: Revision: Drawn By: 190-01933-90 FUSION StereoActive Watersport Stereo QSM (ML) KEG 08/04/16 Revision History Rev. Date 08/04/16 Description of Change Experimental Release ECO No. ---- Printing Specifications Tolerance: Material: Color: Bindery: Folds: Trimmed Dimensions: Finished Dimensions: Notes: ±0.0787" (±2 mm) Cover: 120-lb coated. Text: 80-lb woodfree. Approved equivalents allowed. Cover: 4-color process. Text: Black ink. Saddle stitch. Approved equivalents allowed. Not Applicable 260 mm x 160 mm 130 mm x 160 mm This part shall comply with Garmin Banned & Restricted Substances (GPN 001-00211-00). Content Management System (CMS) Details GUID: Version: Language(s): GUID-4559D1B6-3AF6-40E6-B836-D60F876C8C54 EN-US, FR-FR, IT-IT, DE-DE, ES-XM, PT-BR, NL-NL Notes CONFIDENTIAL This drawing and the specifications contained herein are the property of GARMIN Ltd. or its subsidiaries and may not be reproduced or used in whole or in part as the basis for manufacture or sale of products without written permission. Garmin Ltd. or its subsidiaries C/O Garmin International, Inc. 1200 E. 151st Street Olathe, Kansas 66062 USA Sheet 1 of 1 FUSION STEREOACTIVE ™ Quick Start Manual ® ® ENGLISH FUSIONENTERTAINMENT.COM Getting Started • AM/FM/Weather band: press to tune to the previous station. • USB/Bluetooth: press to skip to the previous track. STEREOACTIVE Controls • AM/FM/Weather band: press to tune to the next station. • USB/Bluetooth: press to skip to the next track. • • • • Press and hold to turn on the stereo. Press and hold to turn off the stereo. AM/FM: Press to mute. USB/Bluetooth : Press to pause. ® • Press and hold to put in Bluetooth discoverable mode to pair with a Bluetooth wireless device. • Press to move through the available sources. and Press and hold both keys to cycle through and select the tuner region. and Press both keys to hear information about the battery status, source, and station. NOTE: The weather band is available only in North America. STEREOACTIVE Connectors • AM/FM: ◦ Press and hold to save the current station as a preset. ◦ Press to select the preset station. • USB flash drive: Press to start and stop shuffling. • Press to decrease the volume. • Press and hold to quickly decrease the volume. • Press to increase the volume. • Press and hold to quickly increase the volume. AM/FM: • Press and hold to save the current station as a preset. • Press to select the preset station. À USB port for your mobile device connection or a low-profile USB flash drive. Charges your mobile device. Á Â Ã Charging status LED Power cable port End cap. When properly replaced, this end cap provides a water tight cover. NOTICE The end cap must be properly replaced to achieve the IPX7 water rating. The end cap does not float and is not tethered to the stereo. Use caution when removing it. Getting Started NOTE: The other end of the stereo provides a place for you to connect a lanyard to tether the stereo. 2 Thoroughly clean and dry the mounting Downloading the Owner's Manual For more information about the features discussed in this manual, download the latest owner's manual and translations of manuals from the web. 1 Go to www.stereoactive.com. 2 Select the Product Support tab. 3 Under Manuals & Downloads, select a manual to download. Attaching the FUSION Puck™ Mount You can attach the puck mount to a flat surface using the included adhesive or screws. Refer to the manual for the item on which you are mounting the puck mount for information about the preferred mounting style. If these mounting options are not sufficient for your mounting surface, go to www.stereoactive.com for more mounting accessories. Attaching the Puck Mount Using Adhesive NOTICE Before placing the adhesive on the mounting surface, make sure that the location and orientation are correct. It is extremely difficult to remove the adhesive. The adhesive and puck mount cannot be reused after being removed from a surface. Some mounting surfaces might be damaged after removing the adhesive. 1 Select an appropriate location for the stereo. Before securing the puck mount, make sure it is oriented in the preferred direction. Getting Started surface using a mixture of water and isopropyl alcohol. The mounting surface must be free of dirt, debris, wax, or coatings. Remove the white backing from the adhesive. Press the adhesive to the bottom of the puck mount. Remove the red backing from the adhesive. Carefully orient the puck mount, and press the puck mount firmly onto the mounting surface. Allow the puck mount to sit at room temperature for 72 hours. NOTICE Before attaching the stereo to the puck mount, allow the adhesive to bond to the mounting surface for 72 hours. Failure to allow adequate bonding time may cause the mount to detach from the surface, which could result in damage to the stereo or mount. Attaching the Puck Mount Using Screws NOTICE Before screwing into the surface, check with the manufacturer of the item on which you are mounting the puck to verify that screws should be used. Some surfaces are too thin to support screws, and the adhesive should be used on these surfaces. 1 Select an appropriate location for the stereo. Before securing the puck mount, make sure it is oriented in the preferred direction. 2 Using the puck mount as a template, mark the location of the holes. 3 Remove the mount. 4 Using a drill bit appropriate for the mounting surface, drill the pilot holes. 5 Secure the mount to the surface with the included screws or other screws suitable for the surface. Attaching the Stereo to the Puck Mount 1 Slide the locking lever fully to the left. 2 Place the stereo on the puck in the direction that provides the best listening experience. You can place the stereo on the puck in four different directions to aim the speakers in the right direction. NOTE: The battery will not charge when outside the temperature range of 10° to 45°C (50° to 113°F). 1 Twist the end cap counter-clockwise and pull off the cap. 2 Plug the power cable into the power port. 3 Plug the AC power adaptor into a standard wall outlet. When the battery is charging, the LED is on. 4 Charge the battery completely. It takes approximately 3 hours to fully charge the battery. The LED turns off when the stereo is fully charged. 5 Remove the power cable. 6 Insert the end cap and twist it clockwise as far as it will turn, aligning the dot on the cap with the on the stereo. NOTICE The end cap must be properly replaced to achieve the IPX7 water rating. Installing a Different Language for the Voice Prompts 3 Slide the locking lever to the right to lock the stereo on the puck. Charging the STEREOACTIVE Stereo NOTICE To prevent corrosion, thoroughly dry the power port and the surrounding area before charging. You can change the language of the voice prompts. Choose from Dutch, French, German, Italian, and Spanish. 1 Go to www.stereoactive.com. 2 Select the Product Support tab. 3 Under Software Updates, select the language to install. 4 Follow the on-screen instructions. Connecting Devices You can connect media player devices to the stereo using Bluetooth wireless technology or Connecting Devices the USB port. You can also control the stereo with a Garmin watch. For a list of a compatible devices, go to www.stereoactive.com. ® Controlling the Stereo with a Compatible Bluetooth Device You can play media from a compatible Bluetooth device using the Bluetooth wireless connection. 1 Enable Bluetooth on your compatible Bluetooth device. 2 Bring the compatible Bluetooth device within 10 m (33 ft.) of the stereo. 3 On the STEREOACTIVE stereo, press and hold until you hear Discoverable. 4 On your compatible Bluetooth device, select StereoActive from the list of discovered devices. 5 If your compatible Bluetooth device does not connect to the stereo, repeat steps 1 though 4. 6 Play music using your Bluetooth device. Controlling the Stereo with a Compatible USB Device NOTICE The end cap must be properly replaced to achieve the IPX7 water rating. You can connect a USB flash drive, compatible Apple IAP2 device, or compatible Android™ AOA device to the USB port to play music and charge compatible Apple or Android devices. ® Controlling the Stereo with a Garmin Watch For more information about the watch, see the watch manual at www.garmin.com/manuals. More Information 1 Following the instructions in the watch manual, install the FUSION-Link™ app from the Connect IQ™ store onto the watch. 2 On the STEREOACTIVE stereo, press and hold until you hear Discoverable. 3 Bring the watch within 3 m (10 ft.) of the stereo. NOTE: Stay 10 m (33 ft.) away from other ANT devices while pairing. 4 Open the FUSION-Link app on the watch. The first time you open the app on the watch, the watch automatically pairs with and connects to the stereo. If you need to pair to another stereo, in the FUSION-Link app, select Settings > Pair new. 5 Control the audio playback using the FUSION-Link app on the watch. After the devices are paired, they connect automatically when they are turned on, within range, and the app is open on the watch. ® More Information Specifications Water rating Fully gasketed, floatable, IEC 60529 IPX7* Dimensions (W × H 236 mm (9.29 in.) × 82 mm × D) (3.23 in.) × 139 mm (5.47 in.) Weight 1.3 kg (2.87 lb.) Battery type Rechargeable lithium-ion Battery life Up to 20 hr. Charging requirements 100 to 240 Vac AC power adaptor (included) or 12 Vdc 2 A car adaptor (optional accessory); charges within 3 hours Operating From 0° to 50°C (from -32° temperature range to 122°F) Charging From 10° to 45°C (from 50° temperature range to 113°F) Long-term storage From -20° to 70°C (from -4° temperature range to 158°F) Bluetooth wireless range Up to 10 m (33 ft.) Bluetooth profiles A2DP, AVRCP Bluetooth version 4.1 ANT wireless range Up to 3 m (10 ft.) USB Type A port for USB flash drive or media player connection, also provides 1 A charging USB compatibility Android Open Accessory (AOA) devices, iAP2 Apple devices USB format FAT32 USB audio format MP3, max. 250 files per folder, max. 8 GB USB flash drive Speakers 2 x 2.5 in. with passive radiator Amplifier Class D, 2 x 20 W RMS Tuner FM/AM (Japan, Australasia, Europe, USA), weather band (North America only) • Keep the original sales receipt, or a photocopy, in a safe place. Troubleshooting My stereo does not respond to my key presses • Charge the stereo (page 4). • Press and hold for 12 seconds. There is interference on the audio when listening to AM radio • Remove the power cable from the stereo’s power cable port, and move the stereo away from the AC power adaptor. • Unplug the AC power adaptor from the wall outlet. • Move the stereo away from other AC power adaptors. *The device can withstand submersion in 1 meter of water for up to 30 minutes. Exceeding this will result in permanent damage to the stereo and void your warranty. Registering Your STEREOACTIVE Help us better support you by completing our online registration today. • Go to www.fusionentertainment.com. More Information FUSION SUPPORT New Zealand Australia Europe USA Pacific ® 09 369 2900 1300 736 012 +44 (0) 370 8501244 623 580 9000 +64 9 369 2900 ® Garmin , the Garmin logo, FUSION , and the Fusion logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. FUSION Puck™ and StereoActive™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin. ® Android™ is a trademark of Google™ Inc. Apple is a trademark of Apple Inc., registered in the U.S. and other countries. Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. Other trademarks and trade names are those of their respective owners. ® FUSIONENTERTAINMENT.COM ® 190-01933-90_01 August 2016 Printed in Taiwan
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 1 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:fb88a5f2-a93e-11f2-0000-02c7314339d4 Producer : GPL Ghostscript 9.18 Modify Date : 2017:07:25 10:17:16Z Create Date : 2017:07:25 10:17:16Z Creator Tool : UnknownApplication Document ID : uuid:fb88a5f2-a93e-11f2-0000-02c7314339d4 Format : application/pdf Title : UntitledEXIF Metadata provided by EXIF.tools