Garmin 03069 Low Power Transmitter User Manual

Garmin International Inc Low Power Transmitter

Contents

User Manual

Download: Garmin 03069 Low Power Transmitter User Manual
Mirror Download [FCC.gov]Garmin 03069 Low Power Transmitter User Manual
Document ID3290277
Application IDLsixJTwLsxADw10WAps0Pg==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize239.27kB (2990891 bits)
Date Submitted2017-02-21 00:00:00
Date Available2017-04-07 00:00:00
Creation Date2017-01-13 10:58:11
Document Lastmod2017-01-13 10:58:11
Document TitleUser Manual

© 2016 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its
products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates
and supplemental information concerning the use of this product.
ANT+ , Garmin , the Garmin logo, TracBack , and VIRB are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. BaseCamp™, myGarmin™, myTrends™,
nüMaps Guarantee™, nüMaps Lifetime™, and trafficTrends™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.
®
®
®
®
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such name by Garmin is under license. microSD™ is a trademark of SD-3C. Windows is a registered
trademark of Microsoft Corporation in the United States and/or other countries. iPod and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.
®
®
®
®
BMW is a registered trademark of BMW AG.
®
This Class III product shall be powered by an LPS power supply.
M/N: A03069
This product is ANT+ certified. Visit www.thisisant.com/directory for a list of compatible products and apps.
®
Select Where To? > Recent.
Clearing the List of Recently Found Locations
Select Where To? > Recent >
> Clear > Yes.
Finding Parking
1 Select Where To? > Categories > Parking.
2 Select a parking location.
Finding Your Last Parking Spot
When you disconnect the device from vehicle power while the
device is on, your current location is saved as a parking spot.
Select Apps > Last Spot.
Search Tools
Search tools allow you to search for specific types of locations
by responding to on-screen prompts.
Finding an Intersection
You can search for an intersection or junction between two
streets, highways, or other roads.
1 Select Where To? > Categories > Intersections.
2 Follow the on-screen instructions to enter street information.
3 Select the intersection.
Finding a City
NOTE: Selecting a city navigates you near the city center.
1 Select Where To? > Categories > Cities.
2 Select Enter Search.
3 Enter a city name, and select .
4 Select a city.
Finding a Location Using Coordinates
You can find a location using latitude and longitude coordinates.
This can be helpful when geocaching.
1 Select Where To? > Categories > Coordinates.
2 If necessary, select , and change the coordinate format or
datum.
3 Enter the latitude and longitude coordinates.
4 Select View on Map.
Setting a Simulated Location
If you are indoors or not receiving satellite signals, you can use
the GPS simulator to plan routes from a simulated location.
1 Select Settings > Navigation > GPS Simulator.
2 From the main menu, select View Map.
3 Tap the map twice to select an area.
The address of the location appears at the bottom of the
screen.
4 Select the location description.
5 Select Set Location.
Saving Locations
Saving a Location
Search for a location Finding a Location by Category, page 3.
From the search results, select a location.
Select .
Select
> Save.
Saving Your Current Location
1 From the map, select the vehicle icon.
2 Select Save.
3 Enter a name, and select Done.
4 Select OK.
Starting a Route to a Saved Location
1 Select Where To? > Saved.
2 If necessary, select a category, or select All Saved Places.
3 Select a location.
4 Select Go!.
Editing a Saved Location
Select Where To? > Saved.
If necessary, select a category.
Select a location.
Select .
Select
> Edit.
Select an option:
• Select Name.
• Select Phone Number.
• Select Categories to assign categories to the saved
location.
• Select Change Map Symbol to change the symbol used
to mark the saved location on a map.
7 Edit the information.
8 Select Done.
Assigning Categories to a Saved Location
You can add custom categories to organize your saved
locations.
NOTE: Categories appear in the saved locations menu after you
have saved at least 12 locations.
1 Select Where To? > Saved.
2 Select a location.
3 Select .
4 Select > Edit > Categories.
5 Enter one or more category names, separated by commas.
6 If necessary, select a suggested category.
7 Select Done.
Deleting a Saved Location
NOTE: Deleted locations cannot be recovered.
1 Select Where To? > Saved.
2 Select > Delete Saved Places.
3 Select the box next to the saved locations to delete, and
select Delete.
Saving a Home Location
You can set your home location for the location you return to
most often.
1 Select Where To? > > Set Home Location.
2 Select Enter My Address, Use Current Location, or
Recently Found.
The location is saved as "Home" in the Saved menu.
Going Home
The first time you start a route home, the device prompts you to
enter your home location.
1 Select Where To? > Go Home.
2 If necessary, enter your home location.
Editing Your Home Location Information
1 Select Where To? > Saved > Home.
2 Select .
3 Select > Edit.
4 Enter your changes.
5 Select Done.
Viewing Recently Found Locations
Your device stores a history of the last 50 locations you have
found.
About Locations
2 Select > Reset Field(s).
3 Select an option:
• When not navigating a route, select Select All to reset
every data field except the speedometer, on the first page.
• Select Reset Trip Data to reset the information on the trip
computer.
• Select Reset Max. Speed to reset the maximum speed.
• Select Reset Trip B to reset the odometer.
Viewing Current Location Information
You can use the Where Am I? page to view information about
your current location. This feature is helpful if you need to tell
emergency personnel your location.
From the map, select the vehicle.
6 Select your headset from the list, and select OK.
Your device sends navigation prompts to your headset as you
navigate a route.
Enabling or Disabling Headset Features
You can enable or disable features for your paired Bluetooth
headset.
1 Select Settings > Bluetooth.
2 Select your paired Bluetooth headset.
3 Select one or more options:
• To hear phone and navigation prompts through your
headset, select Phone, Navigation.
• To hear media playback through your headset, select
Media.
Finding Nearby Services
Pairing Your Phone
You can use the Where Am I? page to find nearby services,
such as fuel, hospitals or police stations.
1 From the map, select the vehicle.
2 Select a category.
Before you can pair your device with a mobile phone, you must
pair and connect to a compatible wireless headset.
1 Place your phone and your Navigator device within 10 m
(33 ft.) of each other.
2 On your phone, enable Bluetooth wireless technology, and
set the phone to be discoverable.
3 On your Navigator device, select Settings > Bluetooth >
Scan for Devices.
4 Select OK.
A list of nearby Bluetooth devices appears.
5 Select your phone from the list, and select OK.
6 Follow the on-screen instructions on your phone and your
Navigator device.
Getting Directions to Your Current Location
If you need to tell another person how to get to your current
location, your device can give you a list of directions.
1 From the map, select the vehicle.
2 Select > Directions to Me.
3 Select a starting location.
4 Select Select.
Hands-Free Features
You can connect your device to a wireless headset and listen to
navigation voice prompts and multimedia audio files on the
device through the headset. While connected to a headset, you
can connect to a mobile phone to make and receive calls or
listen to multimedia audio using the device and your headset.
Enabling Bluetooth Wireless Technology
1 Select Settings > Bluetooth.
2 Select Bluetooth.
About Wireless Headsets
NOTE: To listen to high-quality audio wirelessly, you can
connect to a Bluetooth headset that supports the A2DP profile.
Using Bluetooth wireless technology, your device can stream
multimedia audio from a compatible Bluetooth device and send
audio navigation prompts to a wireless headset.
Pairing a Wireless Headset
NOTE: Only one headset can be active at a time.
Before you can receive navigation prompts through your
headset, you must pair your device with a compatible mobile
headset.
1 Place your headset and your Navigator device within 10 m
(33 ft.) of each other.
2 On your Navigator device, enable Bluetooth wireless
technology.
3 On your headset, enable Bluetooth wireless technology and
make it visible to other Bluetooth devices.
On
your Navigator device, select Settings > Bluetooth >
Scan for Devices.
5 Select OK.
A list of nearby Bluetooth devices appears.
Hands-Free Features
Enabling or Disabling Smartphone Features
You can enable or disable features for your paired smartphone.
1 Select Settings > Bluetooth.
2 Select your paired smartphone.
3 Select one or more options:
• To place or receive phone calls through your Navigator
device, select Phone calls.
• To connect to the Smartphone Link app on your
smartphone, select Smartphone Link (Smartphone Link,
page 8).
• To control media playback on your smartphone using your
Navigator device, select Media (About the Media Player,
page 11).
Tips After Pairing the Devices
• After the initial pairing, the two devices can connect
automatically each time you turn them on.
• When your phone is connected to your device and a
Bluetooth headset, you are ready to receive voice calls.
• When you turn on the device, it tries to connect to the last
phone or Bluetooth device to which it was connected.
• You might need to set your phone to connect to the device
automatically when the device is turned on.
Placing a Call
Before you can place a call, you must pair your device with a
wireless headset and a compatible smartphone.
1 Select Phone.
2 Select an option:
• To dial your home number, select Call Home.
• To dial a number, select Dial, enter a phone number, and
select Dial.
• To dial a number using your voice, select Voice Dial, and
speak a phone number.
• To call a contact from your phone book, select Phone
Book, and select a contact.
• To call a recently dialed or received phone number, select
Call History, and select a number.
Disconnecting a Bluetooth Device
You can temporarily disconnect a Bluetooth device without
deleting it from the paired devices list. The Bluetooth device can
connect to your Navigator device automatically in the future.
1 Select Settings > Bluetooth.
2 Select the device to disconnect.
3 Clear the check box next to the name of your paired device.
Deleting a Paired Bluetooth Device
You can delete a paired Bluetooth device to prevent it from
automatically connecting to your Navigator device in the future.
1 Select Settings > Bluetooth.
2 Select the device to delete.
3 Select Unpair device.
Using the Apps
Viewing Help Files
Select Apps > Help to view the full owner's manual.
Searching Help Topics
Select Apps > Help >
About Garmin Live Services
Before you can use Garmin Live Services, your device must be
connected to a supported phone running Smartphone Link.
Some services, like weather, are available as separate apps on
your device. Other services, like traffic, enhance the existing
navigation features on your device. Features that require access
to Garmin Live Services display the Smartphone Link symbol
and appear only when the device is connected to a supported
phone running Smartphone Link.
Subscribing to Garmin Live Services
Before you can subscribe to Garmin Live Services, you must
install the Smartphone Link app on your phone.
1 Start the Smartphone Link app on your phone.
2 Select Garmin Live Services.
A list of services and subscription prices appears.
3 Select a service.
4 Select the price.
5 Select Subscribe.
6 Follow the on-screen instructions.
Smartphone Link
Smartphone Link is a phone application that allows you to
synchronize location data with your phone and access live
information using your phone data connection. Your device
transfers data from Smartphone Link using Bluetooth wireless
technology. Live information is available through free and
subscription-based plans from Garmin Live Services.
Saved locations and recently found locations are synchronized
with your phone each time your device connects to Smartphone
Link.
Downloading Smartphone Link
Smartphone Link is available for some smartphones. See the
application store for your phone for compatibility and availability
information.
Download Smartphone Link from the application store on
your supported phone.
See your phone owner's manual for information on
downloading and installing applications.
Sending a Location from Your Phone to Your Device
Smartphone Link is registered as a navigation application on
your phone.
1 From your phone, select the button to start navigating to a
location (see the owner's manual for your phone).
2 From the application menu, select Smartphone Link.
The next time you connect your device to your phone, the
location is transferred to the recently found items on your
device.
Viewing the Weather Forecast
Before you can use this feature, you must connect your device
to a supported phone running Smartphone Link. This feature is
not available in all areas.
1 Select Apps > Weather.
2 Select a day.
The detailed forecast for that day appears.
Viewing Weather Near a Different City
1 Select Apps > Weather > Current Location.
2 Select an option:
• To view weather for a favorite city, select a city in the list.
• To add a favorite city, select Add City, and enter a city
name.
Viewing the Weather Radar
Before you can use this feature, you must purchase Advanced
Weather service using Smartphone Link.
You can view an animated, color-coded radar map of current
weather conditions, as well as a weather icon on the map. The
weather icon changes to show weather in the vicinity, such as
rain, snow, and thunderstorms.
1 Select Apps > Weather.
2 If necessary, select a city.
3 Select > Weather Radar.
Viewing Weather Alerts
Before you can use this feature, you must purchase Advanced
Weather service using Smartphone Link.
While you are traveling with your device, weather alerts may
appear on the map. You can also view a map of weather alerts
near your current location or near a selected city.
1 Select Apps > Weather.
2 If necessary, select a city.
3 Select > Weather Alerts.
Checking Road Conditions
Before you can use this feature, you must purchase Advanced
Weather service using Smartphone Link.
1 Select Apps > Weather.
2 If necessary, select a city.
3 Select > Road Conditions.
Using the Apps
While creating or editing a trip, any via point can be changed to
a shaping point and any shaping point can be changed into a via
point.
1 Select Apps > Trip Planner.
2 Select New Trip.
3 Select Select Start Location.
4 Search for a location (Finding a Location by Category,
page 3).
5 Select Select.
6 Select to add a final destination.
7 Select to add at least one via point.
Via points are indicated by an orange flag.
8 If necessary, select the orange flag next to a via point to
change it to a shaping point.
Shaping points are indicated by a blue dot.
9 Select Next.
10 Enter a name, and select Done.
Scheduling a Trip
You can add scheduling information to each location in your trip,
including the desired arrival time and layover duration at each
location. This can help you plan your departure to reach
locations in your trip on time.
1 Select Apps > Trip Planner.
2 Select a trip.
3 Select a location.
4 Select Departure Time or Arrival Time.
5 Select a date and time, and select Save.
6 Select Duration.
7 Select the amount of time you intend to spend at the location,
and select Save.
8 If necessary, repeat steps 3 through 7 for each location.
Changing Transportation Modes in a Trip
You can change the transportation modes used to travel in a
saved trip.
1 Select Apps > Trip Planner.
2 Select a trip.
3 Select > Transportation Mode.
4 Select a transportation mode.
5 Select Save.
Navigating to a Saved Trip
1 Select Apps > Trip Planner.
2 Select a saved trip.
3 Select Go!.
4 If prompted, select a route.
Editing a Saved Trip
1 Select Apps > Trip Planner.
2 Select a saved trip.
3 Select .
4 Select an option:
• Select Rename Trip.
• Select Edit Destinations to add and delete a location, or
to change the order of locations.
• Select Delete Trip.
• Select Optimize Order to arrange the stops on your trip in
the most-efficient order.
10
Sharing Trips
You can share trips with compatible Garmin devices using
Bluetooth wireless technology.
1 Place your device within 33 ft. (10 m) of a compatible Garmin
device.
Apps > Trip Planner >
> Share > Bluetooth.
Select
3 Select a trip and select Done.
4 Select a device from the list and select OK.
Creating a Round-Trip Route
The device can create a round-trip route using a specified
starting location and a distance, duration, or destination.
1 From the home screen, select Apps > Round Trip.
2 Select Start Location.
3 Select a location, and select Select.
4 Select Trip Attributes.
5 Select an option:
• Select Choose a Distance to plan your route by distance.
• Select Choose a Duration to plan your route based on
time.
• Select Choose a Destination to plan your route based on
a specified location.
6 Enter a distance, duration, or destination.
7 Select an option:
• If you entered a distance or duration, select Done >
Calculate.
• If you selected a destination, select Select.
8 Select a route, and select Go!.
Tracks
A track is a recording of your path. The track log contains
information about the recorded path, including time, location,
and elevation information.
Viewing and Saving Track Information
1 Select Apps > Tracks > Active.
2 Select an option:
• To view all track segments, select All Segments.
• To view a specific track segment, select a segment.
The track is displayed on the map.
3 Select .
4 Select an option:
• To save the track, select Save Track.
• To save the track as a trip, select Save as Trip.
• To view an elevation plot of the track, select Elevation
Profile.
Clearing Your Travel History
The device records your travel history so you can reference
previous tracks and trips. You can clear your travel history at
any time.
Select Settings > Device > Clear Travel History.
TracBack
®
Following Your Recent Track
The TracBack feature records the most recent segment of your
movement. You can retrace your recent track back to a previous
location.
1 Select Apps > TracBack.
Your recent track appears on the map.
2 Select Go!.
Using the Apps
Connecting the Device to Your Computer
You can connect the device to your computer using a USB
cable.
1 Plug the small end of the USB cable into the port on the
device.
2 Plug the larger end of the USB cable into a port on your
computer.
A picture of your device connected to a computer appears on
the device screen.
Depending on your computer operating system, the device
appears as either a portable device, a removable drive, or a
removable volume.
Transferring Data From Your Computer
1 Connect the device to your computer (Connecting the Device
to Your Computer, page 13).
Depending on your computer operating system, the device
appears as either a portable device, a removable drive, or a
removable volume.
On your computer, open the file browser.
Select a file.
Select Edit > Copy.
Browse to a folder on the device.
NOTE: For a removable drive or volume, you should not
place files in the Garmin folder.
Select Edit > Paste.
Customizing the Device
Map and Vehicle Settings
To open the Map and Vehicle settings, from the main menu,
select Settings > Map & Vehicle.
Vehicle: Sets the icon that represents your position on the map.
Go to www.garmingarage.com for more icons.
Driving Map View: Sets the perspective on the map.
Map Detail: Sets the level of detail on the map. More detail may
cause the map to draw slower.
Map Theme: Changes the color of the map data.
Map Buttons: Sets the shortcuts that appear in the map tools
menu.
Map Layers: Sets the data that appears on the map page
(Customizing the Map Layers, page 6).
Dashboards: Sets the map dashboard layout.
Auto Zoom: Automatically selects the zoom level for optimal
use of your map. When disabled, you must zoom in or out
manually.
myMaps: Sets which installed maps the device uses.
Enabling Maps
You can enable map products installed on your device.
TIP: To purchase additional map products, go to
http://buy.garmin.com.
1 Select Settings > Map & Vehicle > myMaps.
2 Select a map.
Navigation Settings
Select Settings > Navigation.
Calculation Mode: Sets the route calculation method.
Off-Route Recalculation: Sets recalculation preferences when
navigating away from an active route.
Avoidances: Sets road features to avoid on a route.
Customizing the Device
Custom Avoidances: Allows you to avoid specific roads or
areas.
Advanced Detours: Sets the length of a detour.
Toll Roads: Sets preferences for avoiding toll roads.
Tolls and Fees: Sets preferences for avoiding toll roads and toll
stickers.
NOTE: This feature is not available in all areas.
Safe Mode: Disables all functions that require significant
operator attention and could become a distraction while
driving.
Automatically Skip Waypoints: Sets the device to skip
waypoints automatically.
GPS Simulator: Stops the device from receiving a GPS signal,
and saves battery power.
Display Settings
Select Settings > Display.
Orientation: Allows you to set the display to portrait (vertical) or
landscape (horizontal).
Color Mode: Allows you to select day or night color mode. If you
select the Auto option, the device automatically switches to
day or night colors based on the time of day.
Brightness: Allows you to adjust the display brightness.
Display Timeout: Allows you to set the amount of idle time
before your device enters sleep mode while using battery
power.
Screenshot: Allows you to take a picture of the device screen.
Screenshots are saved in the Screenshot folder of the device
storage.
Bluetooth Settings
To open the Bluetooth settings, from the main menu, select
Settings > Bluetooth.
Bluetooth: Enables Bluetooth wireless technology.
Discoverable: Allows wireless headsets and phones to find the
device.
Scan for Devices: Searches for nearby Bluetooth devices.
Friendly Name: Allows you to enter a friendly name that
identifies your devices with Bluetooth wireless technology.
Automatically Play Music: Plays music from your compatible
Bluetooth device automatically when connected.
Disabling Bluetooth
1 Select Settings > Bluetooth.
2 Select Bluetooth.
Traffic Settings
Select Settings > Traffic.
Traffic: Enables traffic.
trafficTrends™: Enables the trafficTrends feature.
Units and Time Settings
To open the Units and Time settings page, from the main menu,
select Settings > Units & Time.
Current Time: Sets the device time.
Time Format: Allows you to select a 12-hour, 24-hour, or UTC
display time.
Units: Sets the unit of measure used for distances.
Position Format: Sets the coordinate format and datum used
for geographical coordinates.
13
Language and Keyboard Settings
To open the Language and Keyboard settings, from the main
menu, select Settings > Language & Keyboard.
Voice Language: Sets the language for voice prompts.
Text Language: Sets all on-screen text to the selected
language.
NOTE: Changing the text language does not change the
language of user-entered data or map data, such as street
names.
Keyboard Language: Enables keyboard languages.
Keyboard Layout: Sets the keyboard layout.
Mode-Adaptive Keyboard: Sets the device to select the
optimum keyboard layout when switching between
transportation modes.
Proximity Alerts Settings
NOTE: You must have custom points of interest (POIs) loaded
for proximity points alerts to display.
NOTE: This feature is not available in all areas.
Select Settings > Proximity Alerts.
Audio: Sets the style of alert that plays when you approach
proximity points.
Alerts: Sets the type of proximity points for which alerts are
played.
Device and Privacy Settings
To open the device settings, select Settings > Device.
About: Displays the software version number, the unit ID
number, and information on several other software features.
Garmin Lock: Allows you to lock your device by entering a 4digit PIN and setting a security location.
EULAs: Displays the end-user license agreements.
NOTE: You need this information when you update the
system software or purchase additional map data.
Position Reporting: Shares your position information with
Garmin to improve content.
Travel History: Allows the device to record information for the
myTrends, Where I’ve Been, and Trip Log features.
Clear Travel History: Clears your travel history for the
myTrends, Where I’ve Been, and Trip Log features.
Restoring Settings
You can restore a category of settings or all settings to the
factory default values.
1 Select Settings.
2 If necessary, select a settings category.
3 Select > Restore.
Appendix
Power Cables
Your device can be powered various ways.
• Vehicle power cable
• USB cable
• AC adapter (optional accessory)
Charging the Device
You can charge the battery in the device using any of these
methods.
• Connect the device to the vehicle power cable when it is in
the automotive mount.
14
• Connect the device to a computer using the included USB
cable.
• Connect the device to an optional power adapter accessory,
such as a wall power adapter.
Device Care
NOTICE
Avoid dropping your device.
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
Never use a hard or sharp object to operate the touchscreen, or
damage may result.
Do not use high pressure steam or water to clean the device, or
damage may result.
Your device contains sensitive electronic components that can
be permanently damaged when exposed to excessive shock or
vibration that exceeds normal motorcycle or automobile use. To
minimize the risk of damage to your device, avoid dropping and
operating it in extreme high-shock and high vibration
environments.
Cleaning the Outer Casing
NOTICE
Avoid chemical cleaners and solvents that can damage plastic
components.
1 Clean the outer casing of the device (not the touchscreen)
using a cloth dampened with a mild detergent solution.
2 Wipe the device dry.
Cleaning the Touchscreen
1 Use a soft, clean, lint-free cloth.
2 If necessary, lightly dampen the cloth with water.
3 If using a dampened cloth, turn off the device and disconnect
the device from power.
4 Gently wipe the screen with the cloth.
Avoiding Theft
•
•
•
•
Remove the device and mount from sight when not in use.
Remove the residue left on the windshield by the suction cup.
Do not keep your unit in the glove compartment.
Register your device at http://my.garmin.com.
Extending the Battery Life
•
•
•
•
•
•
Keep your device away from extreme temperatures.
Put the device in sleep mode (Entering Sleep Mode, page 2).
Decrease the screen brightness.
Do not leave your device in direct sunlight.
Disable Bluetooth (Disabling Bluetooth, page 13).
Shorten the display timeout time.
Replacing the Battery
If you need to replace the battery in the device, contact your
BMW Motorrad dealer. Contact your local waste disposal
department for information about proper disposal of the battery.
Locking the Device
Garmin Lock is a theft-deterrent system that locks your device.
Each time you turn on the device, enter the 4-digit PIN or drive
to the security location.
1 Select Settings > Device > Garmin Lock.
2 Select Lock Device.
Appendix
Changing the Fuse in the Vehicle Power
Cable
NOTE: The vehicle power cable is an optional accessory.
NOTICE
When replacing the fuse, do not lose any of the small pieces
and make sure they are put back in the proper position. The
vehicle power cable does not work unless it is assembled
correctly.
If your device does not charge in your vehicle, you may need to
replace the fuse located at the tip of the vehicle adapter.
1 Unscrew the end piece À.
Finding Custom POIs
Before you can find custom POIs, you must load custom POIs
on your device using the POI Loader software (Installing POI
Loader, page 15).
1 Select Where To? > Categories.
2 Scroll to the Other Categories section, and select a category.
Purchasing Accessories
Go to garmin.com/accessories.
Troubleshooting
My device is not acquiring satellite signals
Remove the end piece, the silver tip Á, and the fuse Â.
Install a 3 A fast-blow fuse.
Place the silver tip in the end piece.
Screw the end piece back into the vehicle power cable Ã.
Purchasing Additional Maps
1 Go to your device product page at (www.garmin.com).
2 Click the Maps tab.
3 Follow the on-screen instructions.
Red Light and Speed Cameras
NOTICE
Garmin is not responsible for the accuracy of or the
consequences of using a red light or speed camera database.
NOTE: This feature is not available for all regions or product
models.
Information about red light and speed camera locations is
available in some areas for some product models. Go to
garmin.com/speedcameras to check availability and
compatibility, or to purchase a subscription or one-time update.
You can purchase a new region or extend an existing
subscription at any time.
You can go to mygarmin.com to update the camera database on
your device. You should update your device frequently to
receive the most up-to-date camera information.
For some devices and regions, basic red light or speed camera
data may be included with your device. Included data does not
include updates or a subscription.
Custom Points of Interest
Custom POIs are customized points on the map. They can
contain alerts that let you know if you are near a designated
point or if you are traveling faster than a specified speed.
Installing POI Loader
You can create or download custom POI lists on your computer
and install them on your device using POI Loader software.
1 Go to www.garmin.com/poiloader.
2 Follow the on-screen instructions.
Using the POI Loader Help Files
For more information on the POI loader, refer to the Help file.
With the POI loader open, click Help.
• Verify the GPS simulator is turned off.
• Take your device out of parking garages and away from tall
buildings and trees.
• Remain stationary for several minutes.
The device does not charge in my vehicle
• Check the fuse in the vehicle power cable.
• Verify the vehicle is turned on and is supplying power to the
power outlet.
• Verify the interior temperature of the vehicle is between 32°
and 113°F (between 0° and 45°C).
• Verify the fuse is not broken in the vehicle power outlet.
The touchscreen is not responding to my
touches
1 Turn off the device.
2 Hold your finger on the upper-right corner of the screen and
turn on the device. Continue holding the screen until the
device starts.
The calibration screen appears.
3 Follow the on-screen instructions.
The suction cup will not stay on my
windshield
1 Clean the suction cup and windshield with rubbing alcohol.
2 Dry with a clean, dry cloth.
3 Mount the suction cup.
My battery does not stay charged for very
long
• Decrease the screen brightness.
• Shorten the display timeout.
• Disable Bluetooth wireless technology (Disabling Bluetooth,
page 13).
• Put the device in sleep mode when not in use (Entering
Sleep Mode, page 2).
• Keep your device away from extreme temperatures.
• Do not leave your device in direct sunlight.
The battery gauge does not seem accurate
1 Allow the device to fully discharge.
2 Fully charge the device without interrupting the charge cycle.
My device does not appear as a removable
drive on my computer
On most computers, the device connects using Media Transfer
Protocol (MTP). In MTP mode, the device appears as a portable
device and not as a removable drive.
Troubleshooting
15
My device does not appear as a portable
device on my computer
On Mac computers and some Windows computers, the device
connects using USB mass storage mode. In USB mass storage
mode, the device appears as a removable drive or volume, and
not as a portable device. Windows versions prior to Windows XP
Service Pack 3 use USB mass storage mode.
Battery voltage range
From 7 V to 8.4 V
Radio frequency protocol
Bluetooth wireless technology
2.4 GHz ANT+ wireless communications
protocol (for VIRB Remote)
®
*The device withstands incidental exposure to water of up to 1 m
for up to 30 min. For more information, go to www.garmin.com
/waterrating.
My device does not appear as either a
portable device or a removable drive or
volume on my computer
1 Disconnect the USB cable from your computer.
2 Turn off the device.
3 Plug the USB cable into a USB port on your computer and
into your device.
TIP: Your device should be connected directly to a USB port
on your computer and not to a USB hub.
The device automatically turns on and goes into MTP mode or
USB mass storage mode. A picture of the device connected to a
computer appears on the device screen.
My phone will not connect to the device
• Select Settings > Bluetooth.
The Bluetooth option must be enabled.
• Enable Bluetooth wireless technology on your phone and
bring your phone within 10 m (33 ft.) of the device.
• Go to www.garmin.com/bluetooth for more help.
My device is locked up or frozen
1 Hold the power key for 10 seconds.
The device powers off.
2 Turn on the device (Turning On the Device, page 1).
I need to erase all my user data
1 Connect the device to your computer.
2 Using the file browser on your computer, open the device,
drive, or volume, and open the Internal Storage folder.
3 In the Internal Storage folder, delete the GPX folder.
4 Disconnect the device from your computer and wait 10
seconds.
5 Turn on the device.
6 When the copyright information appears, hold the lower-right
corner of the device screen.
7 Hold the screen until a message appears.
8 Select Yes to erase all user data.
Specifications
Water rating
IEC 60529 IPX7*
Operating temperature
range
From -20° to 55°C (from -4° to 131°F)
Charging temperature range From 0° to 45°C (from 32° to 113°F)
Power input (vehicle power
cable, motorcycle, or
external power)
From 8 to 28 Vdc
Power input (USB)
5 V ±0.25 V
Battery life
Up to 2 hr, depending on usage and
settings
Battery type
User-replaceable lithium-ion battery
16
Specifications


Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2017:01:13 10:58:11-06:00
Modify Date                     : 2017:01:13 10:58:11-06:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2017:01:13 10:58:11-06:00
Format                          : application/pdf
Document ID                     : uuid:4faa74f3-80aa-4d47-af66-70c408b494b0
Instance ID                     : uuid:46eea422-dbf7-4e58-b244-bb6f5c0c6c2d
Page Count                      : 20
EXIF Metadata provided by EXIF.tools
FCC ID Filing: IPH-03069

Navigation menu