Garmin 03102 Digital Transmission System 2412-2462 MHz User Manual

Garmin International Inc Digital Transmission System 2412-2462 MHz

UserManual.wiki >

03102 User Manual >

Contents

1. User Manual 1
2. User Manual

User Manual

• To disable specific app notifications, use the settings in the Smartphone Link app.Showing or Hiding Notifications for Your Smartphone with AndroidYou can use the Smartphone Link app to select which types of notifications appear on your Garmin device.1On your phone, open the Smartphone Link app.2Select .3Verify the Smart Notifications check box is selected.4From the Notifications section, select Settings.A list of notification categories and apps appears.5Select an option:• To enable or disable a notification, select the toggle switch next to the category or app name.• To add an app to the list, select .Disconnecting a Bluetooth DeviceYou can temporarily disconnect a Bluetooth device without deleting it from the paired devices list. The Bluetooth device can connect to your Garmin device automatically in the future.1Select Settings > Wireless Networks.2Select the device to disconnect.3Clear the check box next to the name of your paired device.Deleting a Paired PhoneYou can delete a paired phone to prevent it from automatically connecting to your device in the future.1Select Settings > Wireless Networks.2Select the phone, and select Unpair device.TrafficNOTICEGarmin is not responsible for the accuracy or timeliness of the traffic information.Your device can provide information about traffic on the road ahead or on your route. You can set your device to avoid traffic when calculating routes, and to find a new route to your destination if a large traffic delay occurs on your active route (Traffic Settings, page 22). The traffic map allows you to browse the map for traffic delays in your area.To provide traffic information, your device must be receiving traffic data.• Your device receives free traffic data through the Smartphone Link app (Receiving Traffic Data Using Smartphone Link, page 17).• All product models can receive traffic data using an over-the-air traffic receiver cable accessory (Receiving Traffic Data Using a Traffic Receiver, page 17). Go to your product page at garmin.com to find and purchase a compatible traffic receiver cable accessory.Traffic data is not available in all areas. For information about traffic coverage areas, go to www.garmin.com/traffic.Receiving Traffic Data Using Smartphone LinkYour device can receive free traffic data through the Smartphone Link app.1Connect your device to Smartphone Link (Pairing with Your Phone and Connecting to Smartphone Link, page 14).2On your Garmin device, select Settings > Traffic, and verify the Traffic check box is selected.Receiving Traffic Data Using a Traffic ReceiverNOTICEHeated (metallized) windshields could degrade the performance of the traffic receiver.A traffic receiver receives traffic data from an over-the-air broadcast signal, where available. An over-the-air traffic receiver cable is available as an accessory for all product models. Go to your product page at garmin.com to find and purchase a compatible traffic receiver cable accessory. Traffic data is not available in all areas.Connect the device to vehicle power using the traffic receiver cable (Mounting and Powering the Device in Your Vehicle, page 1).When you are within a traffic coverage area, your device can display traffic information and help you avoid traffic delays.Traffic Receiver SubscriptionsA regional traffic data subscription is included with most traffic receivers. You can add subscriptions for additional regions to your traffic receiver. For more information, go to garmin.com/traffic.Viewing Traffic SubscriptionsSelect Settings > Traffic > Subscriptions.Adding a SubscriptionYou can purchase traffic subscriptions for other regions or countries.1From the main menu, select Traffic.2Select Subscriptions > .3Write down the FM traffic receiver unit ID.4Go to www.garmin.com/fmtraffic to purchase a subscription and get a 25-character code.The traffic subscription code cannot be reused. You must obtain a new code each time you renew your service. If you own multiple FM traffic receivers, you must obtain a new code for each receiver.5Select Next on the device.6Enter the code.7Select Done.Enabling TrafficYou can enable or disable traffic data.1Select Settings > Traffic.2Select the Traffic check box.Viewing Traffic on the MapThe traffic map shows color-coded traffic flow and delays on nearby roads.1From the main menu, select Apps > Traffic.2If necessary, select > Legend to view the legend for the traffic map.Searching for Traffic Incidents1From the main menu, select Apps > Traffic.2Select > Incidents.3Select an item in the list.4If there is more than one incident, use the arrows to view additional incidents.Voice CommandNOTE: Voice command is not available for all languages and regions, and may not be available on all models.Traffic 17

2Select an option:• To install on a Windows computer, select Download for Windows.• To install on a Mac computer, select Download for Mac.3Open the downloaded file, and follow the on-screen instructions to complete the installation.4Start Garmin Express.5Connect your Garmin device to your computer using a USB cable.6When your Garmin device prompts you to enter file transfer mode, select Yes.7On your computer, click Add a Device.The Garmin Express software detects your device.8Click Add Device.9Follow the on-screen instructions to register your device and add it to the Garmin Express software.When setup is complete, the Garmin Express software searches for map and software updates for your device.10Select an option:• To install all available updates, click Install All.• To install a single update, click View Details and select an update.NOTE: If a map update is too large for the internal storage of the device, the software may prompt you to install a microSD card in your device to add storage space (Installing a Memory Card for Maps and Data, page 26).The Garmin Express software downloads and installs the updates onto your device. Map updates are very large, and this process may take a long time on slower Internet connections.Device CareNOTICEAvoid dropping your device.Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause permanent damage.Never use a hard or sharp object to operate the touchscreen, or damage may result.Do not expose the device to water.Cleaning the Camera LensNOTICEDo not use a dry cloth to clean the lens. Use of a dry cloth may damage the lens.Avoid chemical cleaners and solvents that can damage plastic components.You should clean the camera lens regularly to improve the quality of recorded video.1Wipe the lens with a soft, non-scratch cloth dampened with water or alcohol.2Allow the lens to air dry.Cleaning the Outer CasingNOTICEAvoid chemical cleaners and solvents that can damage plastic components.1Clean the outer casing of the device (not the touchscreen) using a cloth dampened with a mild detergent solution.2Wipe the device dry.Cleaning the Touchscreen1Use a soft, clean, lint-free cloth.2If necessary, lightly dampen the cloth with water.3If using a dampened cloth, turn off the device and disconnect the device from power.4Gently wipe the screen with the cloth.Avoiding Theft• Remove the device and mount from sight when not in use.• Remove the residue left on the windshield by the suction cup.• Do not keep your unit in the glove compartment.• Register your device using the Garmin Express software (garmin.com/express).Resetting the DeviceYou can reset your device if it stops functioning.Hold the power key for 12 seconds.Removing the Device, Mount, and Suction CupRemoving the Device from the Mount1Press the release tab or button on the mount.2Tilt the bottom of the device upward, and lift the device from the mount.Removing the Mount from the Suction Cup1Turn the device mount to the right or left.2Apply pressure until the socket on the mount releases the ball on the suction cup.Removing the Suction Cup from the Windshield1Flip the lever on the suction cup toward you.2Pull the tab on the suction cup toward you.24 Device Maintenance

Changing the Fuse in the Vehicle Power CableNOTICEWhen replacing the fuse, do not lose any of the small pieces and make sure they are put back in the proper position. The vehicle power cable does not work unless it is assembled correctly.If your device does not charge in your vehicle, you may need to replace the fuse located at the tip of the vehicle adapter.1Rotate the end piece À counter clockwise to unlock it.TIP: You may need to use a coin to remove the end piece.2Remove the end piece, the silver tip Á, and the fuse Â.3Insert a new fast-blow fuse that has the same current, such as 1 A or 2 A.4Place the silver tip in the end piece.5Push in the end piece and rotate it clockwise to lock it back into the vehicle power cable Ã.TroubleshootingMy video recordings are blurry• Clean the camera lens (Cleaning the Camera Lens,page 24).• Clean the windshield in front of the camera.• Verify the area of the windshield in front of the camera iscleared by the windshield wipers, and move the device, ifnecessary.My memory card has degraded and needs to be replacedAll microSD memory cards wear out after they are overwritten a large number of times. Because the dash camera records continuously, you should replace the memory card periodically (Installing the Dash Camera Memory Card, page 1). Your device detects memory card errors automatically and alerts you when it is time to replace your memory card.You can take these actions to help extend the useful life of the memory card.• Turn off the device when your vehicle is not in use.If your device is not connected to an ignition-switched vehiclepower outlet, you should turn off the device when yourvehicle is not in use to prevent the dash camera fromrecording unneeded footage.• Transfer saved video footage to a computer.The memory card lasts longer when more free space isavailable on the card.• Use a high-quality memory card with a speed rating of class10 or higher.Purchase your replacement memory card from a high-qualitymanufacturer and a reputable vendor.My video recordings are choppy or incomplete• For the best camera and video results, use a high-qualitymemory card with a speed rating of class 10 or higher.A slower memory card may not record video quickly enough.• If the device displays a memory card error alert, replace thememory card (Installing the Dash Camera Memory Card,page 1).• Update your device to the latest software (Updating Mapsand Software with Garmin Express, page 23).The suction cup will not stay on my windshield1Clean the suction cup and windshield with rubbing alcohol.2Dry with a clean, dry cloth.3Mount the suction cup (Mounting and Powering the Device in Your Vehicle, page 1).My device is not acquiring satellite signals• Verify the GPS simulator is turned off (Navigation Settings,page 21).• Take your device out of parking garages and away from tallbuildings and trees.• Remain stationary for several minutes.The device does not charge in my vehicle• Check the fuse in the vehicle power cable (Changing theFuse in the Vehicle Power Cable, page 25).• Verify the vehicle is turned on and is supplying power to thepower outlet.• Verify the interior temperature of the vehicle is within thecharging temperature range indicated in the specifications.• Verify the fuse is not broken in the vehicle power outlet.My battery does not stay charged for very long• Decrease the screen brightness (Display Settings, page 22).• Shorten the display timeout (Display Settings, page 22).• Decrease the volume (Adjusting the Volume, page 2).• Turn off the wi-fi radio when it is not in use (Wireless NetworkSettings, page 21).• Put the device in power saving mode when not in use(Turning the Device On or Off, page 1).• Keep your device away from extreme temperatures.• Do not leave your device in direct sunlight.My device does not connect to my phone or Smartphone Link• Select Settings > Wireless Networks.The Bluetooth option must be enabled.• Enable Bluetooth wireless technology on your phone andbring your phone within 10 m (33 ft.) of the device.• On your smartphone, open the Smartphone Link app, andselect > to restart the Smartphone Link backgroundservices.• Verify your phone is compatible.Go to www.garmin.com/bluetooth for more information.• Complete the pairing process again.To repeat the pairing process, you must unpair your phoneand device (Disconnecting a Bluetooth Device, page 17), andcomplete the pairing process (Pairing with Your Phone andConnecting to Smartphone Link, page 14).The Smartphone Link app affects the battery charge level on my smartphoneThe Smartphone Link app uses Bluetooth wireless technology to send data to and receive data from your device. It is normal for Troubleshooting 25

an active Bluetooth connection to consume some battery power. The app also periodically checks for updates to available services, which may consume additional battery power.You can change the battery usage settings in the Smartphone Link app to reduce the amount of battery power the app uses.1From the Smartphone Link app on your smartphone, select .2Scroll to the Battery Usage section, and select Settings.3Select one or more options:• Clear the Bluetooth Auto-Connect check box.Disabling this option may save a small amount of batterypower, but it prevents the app from connecting to yourGarmin device automatically. While this optionis disabled, you must select from the Smartphone Linkmain menu each time you want to connect your device toSmartphone Link.• Clear the Live Services Check check box.On some smartphones, disabling this option maysignificantly reduce the battery power used by the app.While this option is disabled, you must manually refreshthe Smartphone Link main menu to receive updatedinformation about available live services.AppendixInstalling a Memory Card for Maps and DataYou can install a memory card to increase the storage space for maps and other data on your device. You can purchase memory cards from an electronics supplier, or go to www.garmin.com/maps to purchase a memory card with pre-loaded Garmin mapping software. The device supports microSD memory cards from 4 to 32 GB.1Locate the map and data memory card slot on your device (Garmin Device Overview, page 1).2Insert a memory card into the slot.3Press it in until it clicks.Data ManagementYou can store files on your device. The device has a memory card slot for additional data storage.NOTE: The device is not compatible with Windows 95, 98, Me, Windows NT®, and Mac OS 10.3 and earlier.About Memory CardsYou can purchase memory cards from an electronics supplier, or purchase pre-loaded Garmin mapping software (www.garmin.com). In addition to map and data storage, the memory card can be used to store files such as maps, images, geocaches, routes, waypoints, and custom POIs.Connecting the Device to Your ComputerYou can connect the device to your computer using a USB cable.1Plug the small end of the USB cable into the port on the device.2Plug the larger end of the USB cable into a port on your computer.3When your Garmin device prompts you to enter file transfer mode, select Yes.A picture of your device connected to a computer appears on the device screen.Depending on your computer operating system, the device appears as either a portable device, a removable drive, or a removable volume.Transferring Data From Your Computer1Connect the device to your computer (Connecting the Device to Your Computer, page 26).Depending on your computer operating system, the device appears as either a portable device, a removable drive, or a removable volume.2On your computer, open the file browser.3Select a file.4Select Edit > Copy.5Browse to a folder on the device.NOTE: For a removable drive or volume, you should not place files in the Garmin folder.6Select Edit > Paste.Viewing GPS Signal StatusHold for three seconds.Purchasing Additional Maps1Go to your device product page at garmin.com.2Click the Maps tab.3Follow the on-screen instructions.Purchasing AccessoriesGo to garmin.com/accessories.26 Appendix

Navigation menu