Garmin 03110 Digital Transmission System User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3294146
Application ID	B6FWJZFSr/fZOcVdTRtTFQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	119.29kB (1491153 bits)
Date Submitted	2017-02-24 00:00:00
Date Available	2017-04-10 00:00:00
Creation Date	2017-01-25 15:29:06
Producing Software	Antenna House PDF Output Library 6.2.625 (Windows (x64))
Document Lastmod	2017-02-01 07:20:38
Document Title	User Manual
Document Creator	AH XSL Formatter V6.2 MR5 for Windows (x64) : 6.2.7.18952 (2014/11/12 16:18JST)

A03110
Owner’s Manual
© 2017 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its
products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates
and supplemental information concerning the use of this product.
Garmin® and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. Garmin Dash Cam™, Garmin Express™, Travelapse™, and VIRB®
are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.
microSD™ and the microSD logo are trademarks of SD-3C, LLC.
M/N: A03110
Table of Contents
Getting Started............................................................... 1
Installing the Memory Card ......................................................... 1
Device Overview ......................................................................... 1
Installing the Mount onto Your Windshield ................................. 1
Installing and Setting Up ..................................... 1
Setting and Placement................................................... 2
Turning On the Device Manually ................................................ 2
Turning Off the Device Manually ................................................ 2
A03110 Settings......................................................... 5
A03110 Settings......................................................................... 5
Driver Assistance Settings .......................................................... 5
System Settings .......................................................................... 5
Device Information......................................................... 5
Support and Updates .................................................................. 5
Viewing Regulatory and Compliance Information ....................... 5
Resetting the Device ................................................................... 5
Specifications .............................................................................. 5
Appendix......................................................................... 5
Changing the Fuse in the Vehicle Power Cable ......................... 5
Troubleshooting............................................................. 6
My A03110 feels warm while it is operating................................ 6
Table of Contents
Getting Started
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Installing the Memory Card
TIP: You can connect the device to power and hold the device in
the preferred mounting location to check the camera's field of
view at that location.
1 Clean the windshield using water or alcohol, and a lint-free
cloth.
The windshield must be free of dust, wax, oils, or coatings.
2 Remove the protective film from the mount adhesive.
The camera requires a microSD™ or microSDHC memory card
of up to 64GB with a speed rating of class 10 or higher. You can
use the included memory card, or you can purchase a
compatible replacement memory card from an electronics
supplier.
1 Insert the memory card À into the slot Á.
3 Position the mount over the mounting location.
2 Press it in until it clicks.
Removing the Memory Card
TIP: The adhesive is extremely sticky. Do not touch the
adhesive to the windshield until the mount is properly
positioned and aligned.
4 Press the mount firmly onto the windshield, and maintain
pressure for 30 seconds.
NOTICE
Removing the memory card while the device is turned on can
result in a loss of data or damage to the device.
1 Turn off the device.
2 Press the card in until it clicks.
3 Release the card.
The card ejects from the slot.
Device Overview
5 Pull the camera and mount away from the windshield.
The metal disk remains attached to the windshield.
À
Press to turn the device on.
Hold for 3 seconds to turn the device off.
Select to return to the previous page.
Á
Select to scroll through menus or pages.
Â
Select to scroll through menus or pages.
Ã
From the viewfinder, select to save a photo.
Hold to save a video clip.
Select to choose an option in a menu.
Installing the Mount onto Your Windshield
NOTICE
The adhesive mount is extremely difficult to remove after it is
installed. You should carefully consider the mounting location
before you install the mount.
Before you can install the adhesive mount onto your windshield,
the ambient temperature must be from 21° to 38°C (from 70° to
100°F).
Getting Started
6 Using your finger, press firmly on the disk for 30 seconds.
This helps to ensure the disc adhesive has proper contact
with the windshield.
7 Wait 24 hours before installing the Dash Cam.
It takes 24 hours for the adhesive to bond properly to the
windshield.
Installing and Setting Up the Dash Cam
NOTICE
Before installing the Dash Cam, you must install the mount and
allow the adhesive to bond to the windshield for 24 hours.
Failure to allow adequate bonding time may cause the mount to
detach from the windshield, which could result in damage to the
product or mount.
1 Place the camera and mount onto the magnetic disc.
2 Plug the vehicle power cable into the USB port on the device.
Setup: Allows you to set the units of measure, time, and
language, and restore them to their default values.
About: Displays the software version number, the unit ID
number, and information about several other software
features.
Regulatory: Displays regulatory and compliance information.
Device Setup
NOTICE
Deleted or overwritten files cannot be restored.
Select > Settings > System > Setup.
Units: Sets the unit of measure used for distances.
Time: Sets the time, date, and format for the time stamp.
Language: Sets all on-screen text to the selected language.
Restore: Restores all settings to the factory default values.
Device Information
Support and Updates
Garmin Express (garmin.com/express) provides easy access to
these services for Garmin devices.
• Product registration
• Product manuals
• Software updates
Setting Up Garmin Express
1 Connect the device to your computer using a USB cable.
2 Go to www.garmin.com/express.
3 Follow the on-screen instructions.
Viewing Regulatory and Compliance
Information
From the system settings, select Regulatory.
Resetting the Device
You can reset your device if it stops functioning.
Hold the power key for 12 seconds.
Specifications
Operating temperature
range
From -20° to 55°C (from -4° to 131°F)
Charging temperature
range
From 0° to 45°C (from 32° to 113°F)
Memory card
Class 10 or higher microSDHC up to 64 GB
Appendix
Changing the Fuse in the Vehicle Power
Cable
System Settings
Select > Settings > System.
Volume: Adjusts the volume of the camera alerts and video
playback.
Brightness: Adjusts the viewfinder display brightness.
Color Mode: Allows you to select day or night color mode. If you
select the Auto option, the device automatically switches to
day or night colors based on the time of day.
Display Timeout: Allows you to specify whether the display
turns off during use or after one minute.
Go Alert
NOTICE
When replacing the fuse, do not lose any of the small pieces
and make sure they are put back in the proper position. The
vehicle power cable does not work unless it is assembled
correctly.
If your device does not charge in your vehicle, you may need to
replace the fuse located at the tip of the vehicle adapter.
1 Rotate the end piece À counter clockwise to unlock it.
TIP: You may need to use a coin to remove the end piece.
2 Remove the end piece, the silver tip Á, and the fuse Â.
3 Insert a new fast-blow fuse that has the same current, such
as 1 A or 2 A.
4 Place the silver tip in the end piece.
5 Push in the end piece and rotate it clockwise to lock it back
into the vehicle power cable Ã.
Troubleshooting
My camera feels warm while it is operating
It is normal for the A03110 to feel warm during typical use,
especially while it is recording high-resolution video or
transmitting a Wi‑Fi signal.
Troubleshooting
support.garmin.com
1800 235 822
+43 (0) 820 220230
+ 32 2 672 52 54
0800 770 4960
1-866-429-9296
+385 1 5508 272
+385 1 5508 271
+420 221 985466
+420 221 985465
+ 45 4810 5050
+ 358 9 6937 9758
+ 331 55 69 33 99
+ 39 02 36 699699
(+52) 001-855-792-7671
0800 427 652
0800 0233937
+47 815 69 555
00800 4412 454
+44 2380 662 915
+35 1214 447 460
+386 4 27 92 500
0861 GARMIN (427 646)
+27 (0)11 251 9800
+34 93 275 44 97
+ 46 7744 52020
+886 2 2642-9199 ext 2
0808 238 0000
+44 870 850 1242
+49 (0) 89 858364880
zum Ortstarif - Mobilfunk kann
abweichen
913-397-8200
1-800-800-1020
March 2017
190-02164-00 _ 0A

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2017:01:25 15:29:06-06:00
Creator                         : AH XSL Formatter V6.2 MR5 for Windows (x64) : 6.2.7.18952 (2014/11/12 16:18JST)
Modify Date                     : 2017:02:01 07:20:38-06:00
Has XFA                         : No
Language                        : 
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : AH XSL Formatter V6.2 MR5 for Windows (x64) : 6.2.7.18952 (2014/11/12 16:18JST)
Metadata Date                   : 2017:02:01 07:20:38-06:00
Producer                        : Antenna House PDF Output Library 6.2.625 (Windows (x64))
Trapped                         : False
Format                          : application/pdf
Document ID                     : uuid:ae1ad2ee-b64d-4e53-85a9-43d69d045ea8
Instance ID                     : uuid:b4e292e0-95c7-4671-a74e-c0e8f5091a0e
Page Layout                     : SinglePage
Page Mode                       : UseOutlines
Page Count                      : 8

EXIF Metadata provided by EXIF.tools