Garmin 03302 Short Burst Data Transceiver User Manual

Garmin International Inc Short Burst Data Transceiver

a href="https://usermanual.wiki/Garmin" itemprop="url"> Garmin >

User Manual

Garmin A03302 SBD Transceiver Module Specification Document Garmin Ltd. or its subsidiaries c/o Garmin International, Inc. 1200 E. 151st Street Olathe, Kansas 66062 U.S.A. Revision History Revision Date Description of Change ECO # 1 02/26/2018 Initial Release
A03302 Specification Document Page 2 of 10 1. Overview1.1 Purpose This document defines requirements for integrating the surface mount Garmin A03302 2-way satellite transceiver module with a host design. 1.2 Introduction The A03302 module is a standalone 2-way satellite communication short burst data transceiver solution. The module is designed as a surface mount, package-on-package (POP) PCB; requiring a mating area on the host PCB of approximately 31mm X 38mm. A host processor is required to interface to the module via UART. The module includes a GPS pass-through option, allowing for a single antenna solution for both GNSS and satellite communication. If this option is not used, the GPS_LNA_OUT pin must be properly terminated. A 49.9Ω 1% resistor can be used. 1.3 Dimensions The following section shows mechanical drawings and dimensions. Care must be taken to prevent shorts between exposed test points of the module and the host PCB. Figure 1: A03302 Module Dimensions
Download:
Mirror Download [FCC.gov]
Document ID3796186
Application IDFR0/EESiWakA0Ywi74fT2w==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize83.78kB (1047272 bits)
Date Submitted2018-03-26 00:00:00
Date Available2018-06-24 00:00:00
Creation Date0000-00-00 00:00:00
Document Lastmod0000-00-00 00:00:00
Document TitleUser Manual
FCC ID Filing: IPH-03302

Navigation menu