Garmin 18 M Z Mo 660Lm N Installation Instructions

Garmin-Zumo-660-Na-Installation-Instructions-720348 garmin-zumo-660-na-installation-instructions-720348

13-M-Z-Mo-660-N-Installation-Instructions 13-m-z-mo-660-n-installation-instructions

375-M-Z-Mo-660-N-Installation-Instructions 375-m-z-mo-660-n-installation-instructions

2014-07-05

: Garmin 18-M-Z-Mo-660Lm-N-Installation-Instructions 18-m-z-mo-660lm-n-installation-instructions garmin pdf

Open the PDF directly: View PDF PDF.
Page Count: 4

DownloadGarmin 18-M-Z-Mo-660Lm-N-Installation-Instructions
Open PDF In BrowserView PDF
zūmo 660 Installation Instructions
Mount Your zūmo on the Motorcyle
	Warning: Incorrectly wiring the power cable with bare wire leads can result in
damage to the vehicle or the battery and can cause bodily injury. Garmin strongly
recommends having an experienced installer with the proper knowledge of electrical
systems install the unit.
S ee the Important Safety and Product Information guide in the product box for product warnings
and other important information.

Step 1: Connect Power to the Mount

Select a suitable and secure location to mount the zūmo on your motorcycle, based on
available power sources and safe cable routing.
Headphone/audio out jack (3.5 mm)

Cradle

Bare wires with
inline fuse for
power connection

Power cable
Microphone jack (2.5 mm)

Mini-USB connector
(for traffic receiever)

Step 2: Install the Handlebar Base

The zūmo includes parts for two handlebar installation solutions. Custom mounts can
require additional hardware (www.ram-mount.com).
A) To install the U-bolt and handlebar base:
1.	 Place the U-bolt around the handlebar, and thread the ends through the handlebar
base.
2.	 Tighten the nuts to secure the base. Do not overtighten.
	Note: The recommended torque is 50 lbf-in. Do not exceed torque of 80 lbf-in.
Handlebar
base
U-bolt
Handlebar

B) To install the handlebar base to the clutch/brake clamp bracket:
	Note: Both 1/4 in. standard and M6 bolts are included. Match the size of the factory
bolts on your clutch/brake clamp bracket.
1.	 Remove the two factory bolts on your clutch/brake clamp bracket.
2.	 Thread the new bolts through the handlebar base, spacers, and clamp bracket.
3.	 Tighten the bolts to secure the base.
Clutch/brake
clamp bracket

Handlebar
base

Spacers

Step 3: Attach the Base Plate to the zūmo Mount

1.	 Thread the M4 × 40 mm panhead screws through the washers, cradle, spacers,
and base plate.
2.	 Tighten the nuts to secure the base plate.
Washers
Panhead screws

Cradle
Base plate

Nuts
Spacers

Step 4: Attach the Base Plate to the Handlebar Base

1.	 Align the ball of the handlebar base and the ball of the base plate with the doublesocket arm.
2.	 Tighten the knob slightly.
3.	 Adjust for better viewing and operation.
4.	 Tighten the knob to secure the mount.
Cradle

Base plate
Double-socket arm

Knob

Power cable

Handlebar base

Step 5: Install Your zūmo in the Mount
1.	 Fit the bottom of your zūmo into the cradle.
2.	 Tilt the zūmo back until it snaps into place.

Cradle
Release button

Power
cable

Remove Your zūmo from Either Mount

1.	 Press the button on the side of the mount to release the zūmo.
2.	 Lift out the zūmo.
3.	 Place the weather cap on the cradle (motorcycle mount only).

Mount Your zūmo in an Automobile
Before mounting the zūmo, see the Important Safety and Product Information guide in the product box
for information about laws pertaining to windshield mounting.
Warning: This product contains a lithium-ion battery. To prevent damage, remove the unit from the
vehicle when exiting or store it out of direct sunlight.

1.	 Plug the automotive power cable into the connector on the right side of the cradle.
Release button

Microphone
jack (2.5 mm)

Automotive
power cable

Cradle

2.	 Remove the clear plastic from the suction cup. Clean and dry your windshield and
the suction cup with a lint-free cloth.
3.	 Place the suction cup on the windshield.
4.	 Flip the lever back, toward the windshield.
Suction cup
mount

	 Warning: Do not use
the suction cup mount on a
motorcycle.
5.	 Snap the cradle onto the suction cup arm.
6.	 Fit the bottom of your zūmo into the cradle.
7.	 Tilt the zūmo back until it snaps into place.

8.	 Plug the other end of the automotive power cable into a power outlet.
9.	 If you are using a traffic receiver in Europe, secure the antenna on the traffic
receiver to the windshield using the suction cups.
© 2008 Garmin Ltd. or its subsidiaries 		

www.garmin.com

Garmin® and zūmo® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and
other countries. These trademarks may not be used without the express permission of Garmin. Other
trademarks and trade names are those of their respective owners.
January 2009	

Part Number 190-01026-02 Rev. A	

Printed in Taiwan



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Annotate, Fill forms, Extract, Print high-res
XMP Toolkit                     : 3.1-702
About                           : 80fb6757-a57d-11da-84bf-c376cc85d35c
Create Date                     : 2008:12:18 13:50:36-06:00
Metadata Date                   : 2008:12:18 13:53:22-06:00
Modify Date                     : 2008:12:18 13:53:22-06:00
Creator Tool                    : Adobe InDesign CS2 (4.0.5)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 8070 bytes, use -b option to extract)
Instance ID                     : uuid:96b33cfc-f459-4e4d-bf09-d448a39095b6
Document ID                     : adobe:docid:indd:a160f26a-cd1c-11dd-a255-8631b31ed8e6
Rendition Class                 : proof:pdf
Derived From Instance ID        : f7f6d624-cc7a-11dd-bf64-ef05f5b5170f
Derived From Document ID        : adobe:docid:indd:4b860360-cc59-11dd-bf64-ef05f5b5170f
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 150.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 150.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:42037BC4249ADD118FDFF090D12E453E, uuid:ADB960E3D59EDD11B52CC63ED4F7CCA6, uuid:47ECAEB2FB9ADD118B78D13E047FBF71, uuid:E66C5CE2BBCBDD11A51EAAEEE052F856, uuid:E66C5CE2BBCBDD11A51EAAEEE052F856, uuid:EE725EE1FC9ADD118B78D13E047FBF71, uuid:E7725EE1FC9ADD118B78D13E047FBF71, uuid:E7725EE1FC9ADD118B78D13E047FBF71, uuid:BD9E192D6D99DD11BFF0C022A37C6DEE, uuid:5D55FB761E9ADD11821FBDA3E06D59F2, uuid:92C81C004599DD11BFF0C022A37C6DEE, uuid:92C81C004599DD11BFF0C022A37C6DEE
Manifest Reference Document ID  : uuid:41037BC4249ADD118FDFF090D12E453E, uuid:ACB960E3D59EDD11B52CC63ED4F7CCA6, uuid:46ECAEB2FB9ADD118B78D13E047FBF71, uuid:E56C5CE2BBCBDD11A51EAAEEE052F856, uuid:E56C5CE2BBCBDD11A51EAAEEE052F856, uuid:ED725EE1FC9ADD118B78D13E047FBF71, uuid:4DECAEB2FB9ADD118B78D13E047FBF71, uuid:4DECAEB2FB9ADD118B78D13E047FBF71, uuid:BC9E192D6D99DD11BFF0C022A37C6DEE, uuid:5C55FB761E9ADD11821FBDA3E06D59F2, uuid:92CEDDD34499DD11BFF0C022A37C6DEE, uuid:92CEDDD34499DD11BFF0C022A37C6DEE
Format                          : application/pdf
Producer                        : Adobe PDF Library 7.0
Trapped                         : False
Page Count                      : 4
Creator                         : Adobe InDesign CS2 (4.0.5)
EXIF Metadata provided by EXIF.tools

Navigation menu