Garmin 9603N Short Burst Data Transceiver User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3256652
Application ID	Sb8p0m8rUMDyJYNkD87D6g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	221.18kB (2764730 bits)
Date Submitted	2017-01-12 00:00:00
Date Available	2017-02-26 00:00:00
Creation Date	0000-00-00 00:00:00
Document Lastmod	0000-00-00 00:00:00
Document Title	User Manual

Quick Start Manual
Getting Started
WARNING
See the Important Safety and Product
Information guide in the product box for
product warnings and other important
information.
Device Overview
NOTE: The device does not charge when
it is outside the approved temperature
range (page 6).
1 Lift the weather cap À.
AF
Plug the small end of the power cable
into the USB port Á on the device.
Plug the other end of the power cable
into an appropriate power source.
Charge the device completely.
Keys
Internal
®
antenna
key (under protective cap)
À
Á
Â
Ã
Ä
Å
Æ
Status LED
Keys
Power key
Select to open the shortcut menu.
Select to zoom out on the map.
Micro-USB port (under weather cap)
Select to zoom in on the map.
Mounting spine
Turning On the Device
Hold .
Charging the Device
NOTICE
To prevent corrosion, thoroughly dry the
USB port, the weather cap, and the
surrounding area before charging or
connecting to a computer.
Select to cancel or return to the
previous page.
Select to open the menu for the
current page.
Select twice to open the home
page.
Select to choose an option or to
acknowledge a message.
Select to view menu options or to
move the map cursor.
Quick Start Manual
Status LED
Green
flash
You have an unread
message.
Red flash
The device does not have a
clear view of the sky.
The device is below 10%
battery power.
Status Icons
3D GPS signal acquired
Network
Your device requires a clear view of the
sky to track points
over the satellite network. Without
a clear view of the sky, your device
attempts to set the information until it
acquires satellite signals.
TIP: For the best connection with
satellites, attach the device to a backpack
or to your upper body.
AF
2D GPS signal acquired
NOTE: It may take up to 20 minutes to
activate your device. The device must
send and receive several messages,
which takes longer than sending a
single message during regular use.
Searching for GPS signal
Features
Sending and receiving data
Unable to send and receive data
Unread messages
Tracking enabled
Bluetooth technology status
®
Charging battery
Charging complete
Activating the Device
Before you can use your
device,
you must activate it.
1 Create an account, and select a
satellite subscription at
garmin.com.
2 Turn on the device.
®
Follow the on-screen instructions.
When prompted, go outdoors to an
open area with a clear view of the sky.
Wait while the device communicates
with the network.
Quick Start Manual
Your device has several
features for your compatible
device using the
app.
allows you to use features on the
larger, higher resolution touchscreen on
your mobile device.
Downloadable Features: View
downloaded maps, aerial imagery,
USGS quadrangle maps, and NOAA
nautical charts on your mobile device.
You should download maps and
charts before going on your trip.
Messages: Allows you to read and write
messages, and access the contacts
list on your mobile device. Messages
appear on both devices.
NOTE: You can have only one mobile
device paired with your device at
a time.
®
Pairing Your Mobile Device
You must pair your device with
your mobile device to use
features.
1
AF
From the app store on your mobile
• Select To: to enter new recipients.
device, install and open the
• Select to select recipients from
app.
your contacts list.
2 Place the device and your
3 Select an option:
mobile device within 3 m (10 ft.) of
• Select Message: to create a new
each other.
message.
3 On the device, select
• Select to select a quick text
Settings > Pair Device
message.
> Pair Device.
Select Send Message.
4 Follow the instructions in the
Replying to a Message
app to complete the pairing
and setup process.
1 Select Messages.
After the devices are paired, they connect 2 Select a conversation.
automatically when they are turned on and
3 Select an option:
within range.
• Select Type Reply to create a
Testing the Device
new message, enter the
You should test the device outdoors
message, and select Done.
before using it on a trip to ensure your
• Select Quick Reply to select a
satellite subscription is active.
quick text message.
Select Test > Test.
Checking for Messages
Wait while the device sends a test
Your device listens for new messages at
message. When you receive a
regular listen intervals. The device will
confirmation message, your device is announce recently sent messages, and
ready to use.
your device receives the message at the
next listen interval. The default interval is
Messages
10 minutes.
Your device sends and receives
text messages and uses the satellite
NOTE: Your device must be in view of a
network. You can send messages to an
satellite at the time of the listen to receive
SMS phone number, an email address, or messages.
another device.
You can force a check for messages by
manually checking for messages, sending
Sending a Preset Message
a message, or sending a track point.
Preset messages are messages that you
During a check, your device connects to
created at garmin.com. Preset
satellites and receives messages waiting
messages have predefined text and
to be sent to your device.
recipients.
Select Check > Check Now.
1 Select Preset.
Choose a preset message, and select
Send.
Sending a Text Message
Select Messages > New Message.
Select an option:
Quick Start Manual
During an emergency, you can request
help. Pressing the key sends a
message to the rescue coordination
center, and they notify the appropriate
emergency responders of your situation.
You can communicate with the rescue
coordination center during your
emergency while you wait for help to
arrive. You should only use the
function in a real emergency situation.
Initiating
NOTE: While in mode, the status bar
is red and the device cannot be turned off.
1 Lift the protective cap À from the
key Á.
Canceling a Rescue
If you no longer need assistance, you can
cancel a rescue after it is sent to
the emergency response service.
1 Lift the protective cap, and hold the
key.
2 Select Cancel.
Your device transmits the cancellation
request. When you receive a
confirmation message from the
emergency response service, the
device returns to normal operation.
Tracking
AF
Tracking records your path. When you
start tracking, your device logs your
location and updates the track line on the
map at the specified log interval. Your
device records track points and transmits
them over the satellite network at the
specified send interval. You can view the
number of track points sent, storage space
remaining, and time until the tracking log
storage is full.
TIP: You can adjust the tracking log
interval and the tracking send interval to
maximize battery life.
Hold the key.
Wait for the countdown.
The device sends a default message
to the emergency response service
with details about your location.
4 Reply to the confirmation message
from the emergency response service.
Your reply lets the emergency
response service know that you are
capable of interacting with them
during the rescue.
For the first 10 minutes of your rescue, an
updated location is sent to the emergency
response service every minute. To
conserve battery power after the first 10
minutes, an updated location is sent every
10 minutes when moving, and every 30
minutes when stationary.
Quick Start Manual
Starting Tracking
Select Tracking > Start.
If necessary, select Share to send a
message that you are tracking.
Navigation
Acquiring GPS Satellite Signals
Before you can use GPS navigation
features, you must acquire satellite
signals.
1 Turn on the device.
Wait while the device locates
satellites.
It may take up to 60 seconds to
acquire satellite signals.
3
If necessary, go to an open area,
away from tall buildings and trees.
Routes
A route is a sequence of locations that
leads you to your final destination. You
can create and save routes at
garmin.com.
Navigating a Saved Route
1 Select Routes.
Select a route.
Select Navigate.
Device Information
Support and Updates
Go to garmin.com for easy access
to these services for devices.
• Product registration
• Product manuals
• Firmware updates
• Map downloads and updates
• Data uploads and syncing your device
with your account
Getting the Owner's Manual
Waypoints
AF
Waypoints are locations you record and
store in the device. Waypoints can mark
where you are, where you are going, or
where you have been.
Creating a Waypoint
You can save your current location as a
waypoint.
1 Select Waypoints > New Waypoint.
The owner's manual includes instructions
for using device features and accessing
regulatory information.
Go to garmin.com/manuals/.
Attaching the Carabiner Clip
Position the carabiner clip À in the
slots on the mounting spine Á of the
device.
If necessary, edit the waypoint
information.
Navigating to a Waypoint
1 Select Waypoints.
Select a waypoint.
Select Navigate.
Map
The basic map shows your location, sent
and received messages, waypoints, and a
colored track line connecting your track
points. The
map also
shows streets, points of interest, and
topographical information.
You can customize the information
displayed on the map.
Trip Info
®
The trip info displays your trip time, time
moving, maximum speed, average speed,
trip distance, and trip odometer.
Slide the carabiner clip up until it locks
in place.
Removing the Carabiner Clip
Lift up on the bottom of the carabiner
clip, and slide the carabiner clip off the
mounting spine.
Specifications
Battery type
Rechargeable, built-in
lithium-ion battery
Water rating
IEC 60529 IPX7*
Operating
temperature
range
From -20 to 60 C
(from -4 to 140 F)
Quick Start Manual
Charging
temperature
range
From 0 to 45 C (from
32 to 113 F)
Radio
frequency and
protocols
Bluetooth enabled
device
Satellite enabled
device
Battery Life
Up to 75 hr.
AF
*The device withstands incidental
exposure to water of up to 1 m for up to
30 min. For more information, go to
www.garmin.com/waterrating.
Battery Information
The actual battery life depends on your
device settings, such as the tracking and
message checking intervals.
Mode
10-minute tracking send
interval and 1-second log
interval
Up to 100 hr. Default mode with 10minute tracking interval
Up to 30 days Power save mode with
30-minute tracking
interval
Standby mode
Up to 1 yr.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Has XFA                         : No
Page Count                      : 6

EXIF Metadata provided by EXIF.tools