Garmin A03110 Digital Transmission System User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3294362
Application ID	A4WAkC+X522r6MwfoSbUpA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	137.78kB (1722263 bits)
Date Submitted	2017-02-24 00:00:00
Date Available	2017-04-10 00:00:00
Creation Date	2017-01-23 15:52:27
Producing Software	Antenna House PDF Output Library 6.2.625 (Windows (x64))
Document Lastmod	2017-01-23 16:01:45
Document Title	User Manual
Document Creator	AH XSL Formatter V6.2 MR5 for Windows (x64) : 6.2.7.18952 (2014/11/12 16:18JST)

AA3110
Owner’s Manual
© 2017 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its
products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates
and supplemental information concerning the use of this product.
Garmin® and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. Garmin Dash Cam™, Garmin Express™, Travelapse™, and VIRB®
are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.
microSD™ and the microSD logo are trademarks of SD-3C, LLC.
M/N: A03110, AA3110
Table of Contents
Getting Started............................................................... 1
Installing the Memory Card ......................................................... 1
Device Overview ......................................................................... 1
Installing the Mount onto Your Windshield ................................. 1
Installing and Setting Up the Dash Cam ..................................... 1
Setting the Camera Placement ................................................... 2
Turning On the Device Manually ................................................ 2
Turning Off the Device Manually ................................................ 2
Dash Cam Recording..................................................... 2
Saving a Video Recording .......................................................... 2
Taking a Picture .......................................................................... 2
Event Detection .......................................................................... 2
Viewing Videos and Pictures ...................................................... 2
Connecting the Device to Garmin® VIRB® App ......................... 2
Deleting a Video or Photo ........................................................... 3
Videos and Photos on Your Computer ....................................... 3
Video Resolution Settings .......................................................... 3
Travelapse ....................................................................... 3
Voice Control.................................................................. 3
Controlling the Camera Using Voice Commands ....................... 3
Turning Voice Control On or Off ................................................. 3
Voice Control Tips ...................................................................... 3
Red Light and Speed Cameras..................................... 3
Forward Collision Warning System.............................. 4
Forward Collision Warning System Performance Tips ............... 4
Lane Departure Warning System.................................. 4
Lane Departure Warning Performance Tips ............................... 4
Go Alert........................................................................... 5
Dash Cam Settings......................................................... 5
Camera Settings ......................................................................... 5
Driver Assistance Settings .......................................................... 5
System Settings .......................................................................... 5
Device Information......................................................... 5
Support and Updates .................................................................. 5
Resetting the Device ................................................................... 5
Specifications .............................................................................. 5
Appendix ......................................................................... 5
Changing the Fuse in the Vehicle Power Cable ......................... 5
Troubleshooting............................................................. 6
My camera feels warm while it is operating ................................ 6
Index................................................................................ 7
Table of Contents
Getting Started
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Installing the Memory Card
TIP: You can connect the device to power and hold the device in
the preferred mounting location to check the camera's field of
view at that location.
1 Clean the windshield using water or alcohol, and a lint-free
cloth.
The windshield must be free of dust, wax, oils, or coatings.
2 Remove the protective film from the mount adhesive.
The camera requires a microSD™ or microSDHC memory card
of up to 64GB with a speed rating of class 10 or higher. You can
use the included memory card, or you can purchase a
compatible replacement memory card from an electronics
supplier.
1 Insert the memory card À into the slot Á.
3 Position the mount over the mounting location.
2 Press it in until it clicks.
Removing the Memory Card
TIP: The adhesive is extremely sticky. Do not touch the
adhesive to the windshield until the mount is properly
positioned and aligned.
4 Press the mount firmly onto the windshield, and maintain
pressure for 30 seconds.
NOTICE
Removing the memory card while the device is turned on can
result in a loss of data or damage to the device.
1 Turn off the device.
2 Press the card in until it clicks.
3 Release the card.
The card ejects from the slot.
Device Overview
5 Pull the camera and mount away from the windshield.
The metal disk remains attached to the windshield.
À
Press to turn the device on.
Hold for 3 seconds to turn the device off.
Select to return to the previous page.
Á
Select to scroll through menus or pages.
Â
Select to scroll through menus or pages.
Ã
From the viewfinder, select to save a photo.
Hold to save a video clip.
Select to choose an option in a menu.
Installing the Mount onto Your Windshield
NOTICE
The adhesive mount is extremely difficult to remove after it is
installed. You should carefully consider the mounting location
before you install the mount.
Before you can install the adhesive mount onto your windshield,
the ambient temperature must be from 21° to 38°C (from 70° to
100°F).
Getting Started
6 Using your finger, press firmly on the disk for 30 seconds.
This helps to ensure the disc adhesive has proper contact
with the windshield.
7 Wait 24 hours before installing the Dash Cam.
It takes 24 hours for the adhesive to bond properly to the
windshield.
Installing and Setting Up the Dash Cam
NOTICE
Before installing the Dash Cam, you must install the mount and
allow the adhesive to bond to the windshield for 24 hours.
Failure to allow adequate bonding time may cause the mount to
detach from the windshield, which could result in damage to the
product or mount.
1 Place the camera and mount onto the magnetic disc.
2 Plug the vehicle power cable into the USB port on the device.
rights to privacy in jurisdictions where you plan to use this
device.
Before you can record video, you must install a camera memory
card (Installing the Memory Card, page 1).
By default, the device immediately starts recording video when it
turns on. It continues recording, overwriting the oldest, nonsaved video until it turns off.
Saving a Video Recording
3 Route the power cable to your vehicle power outlet.
The included vehicle power cable is designed to be routed
out of sight. It is long enough to route around the windshield
in most vehicles, and you can hide the thin cable along or
behind the trim or headliner.
Plug the other end of the vehicle power cable into a power
outlet in your vehicle.
If necessary, turn on the vehicle ignition switch to provide
power to the power outlet in your vehicle.
The device turns on.
Follow the on-screen instructions to complete the initial
device setup.
The camera view appears.
Adjust the position of the camera to capture the desired field
of view.
Setting the Camera Placement
You can mount the device in the left, center, or right of your
windshield. For the best performance, you should set the
Camera Placement option to indicate the location of your device
in the vehicle.
1 Select Settings > Driver Assistance > Camera Placement.
2 Select Horizontal Placement, and select the horizontal
placement of your camera.
3 Select Vehicle Height.
4 Select an option:
• If you are driving a large vehicle, like a full size van or
truck, select Tall.
• If you are driving a car, select Normal.
Turning On the Device Manually
NOTE: When the device is connected to an ignition-switched
power outlet, it turns on automatically when you turn on the
vehicle.
Select .
The device turns on.
Turning Off the Device Manually
NOTE: When the device is connected to an ignition-switched
power outlet, it turns off automatically when you turn off the
vehicle.
Hold for 3 seconds.
The device turns off.
Dash Cam Recording
NOTICE
Some jurisdictions regulate or prohibit use of this device. It is
your responsibility to know and comply with applicable laws and
By default, the device uses a sensor to detect a possible
incident and saves video footage automatically before, during,
and after the detected event. You can also save video files
manually at any time.
Hold .
The device saves the video footage before, during, and after
you select ,
The memory card has limited storage. After you save a video
recording, you should transfer the recording to your computer or
other external storage location for permanent storage (Videos
and Photos on Your Computer, page 3).
Taking a Picture
You can take a picture with this device.
From the viewfinder, select .
The device saves the picture to the memory card.
Event Detection
By default, the device uses a sensor to detect possible incidents
and saves video footage automatically before, during, and after
the detected event. The video footage is stamped with the time,
date, and location of the event.
Viewing Videos and Pictures
NOTE: The device stops recording and alerts are disabled while
viewing videos or pictures.
1 Select > Gallery.
2 Select an option:
• To view videos you saved, select Saved Videos.
• To view parked videos you saved, select Parked Videos.
• To view saved photos, select Pictures.
• To view Travelapse™ video footage, select Travelapse.
• To view recent video footage that has not been saved,
select Unsaved Videos.
3 Select a video or photo.
Connecting the Device to Your Computer
You can view videos and photos on your computer using a
micro-USB cable.
1 Plug the small end of the micro-USB cable into the port on
the device.
2 Plug the larger end of the micro-USB cable into a port on
your computer.
Depending on your computer operating system, the device
appears as either a removable drive or a removable volume.
Connecting the Device to Garmin VIRB App
®
®
You can save pictures and video recordings by connecting your
smartphone or tablet to the free Garmin VIRB App. To download
the Garmin VIRB app, or for more information, go to garmin.com
/VIRBapp.
1 From the application store on your mobile device, install the
Garmin VIRB app.
2 From the main menu on the Dash Cam, select Gallery >
Share Gallery.
Dash Cam Recording
The Dash Cam displays the network name and network
password.
3 From your mobile device, select the Dash Cam Wi‑Fi
network.
4 Enter the network password.
Your Dash Cam shares saved photos and video to your
mobile device.
On
your mobile device, launch the Garmin VIRB app.
®
NOTE: 1080p resolution at 30 frames per second using high
dynamic range (HDR) imaging is not available for the Garmin
Dash Cam 45 product model.
1080p, 30fps: Records video in 1080p resolution at 30 frames
per second.
720p, 30fps: Records video in 720p resolution at 30 frames per
second.
Travelapse
Updating the Camera Using the Garmin VIRB App
You can update the camera software using the Garmin VIRB
mobile app. After you pair the app with your camera, the app
checks for updates automatically and displays a message when
an update is available.
1 From the Garmin VIRB app, when an update is available,
select Download.
2 Follow the on-screen instructions to complete the update
process.
The Travelapse feature captures a fast-motion video of your trip,
which allows you to share a short video of all the places you
traveled. This feature captures video frames at a set distance
interval. For example, it can capture one video frame for every
kilometer or mile you travel. The device varies the rate of
capture based on your speed.
NOTE: Recording Travelapse does not stop dash cam
recording.
Deleting a Video or Photo
• While viewing a video, select
• While viewing a photo, select
> Delete > Yes.
> Yes.
Videos and Photos on Your Computer
NOTE: Some media players might not support high-resolution
playback.
Videos and photos are stored in the DCIM directory on the
camera memory card. Videos are stored in MP4 file format, and
photos are stored in JPG format. You can view and transfer
photos and videos by connecting the memory card or the device
to your computer (Connecting the Device to Your Computer,
page 2).
The videos and photos are sorted into several folders.
100EVENT: Contains videos saved automatically when the
device detects an incident.
101PHOTO: Contains photos.
102SAVED: Contains videos saved manually by the user.
103PARKM: Contains videos saved while parked.
104TLPSE: Contains Travelapse videos.
105UNSVD: Contains unsaved video footage. The device
overwrites the oldest unsaved video when the storage space
for unsaved videos is full.
Video Resolution Settings
You can change the video resolution on your camera.
Resolution is the height of the video in pixels. Higher resolution
video settings require more memory card space than lower
resolution settings.
Select Settings > Camera > Resolution.
1440p, 30fps: Records video in 1440p resolution at 30 frames
per second.
NOTE: 1440p resolution at 30 frames per second is not
available for the Garmin Dash Cam 45 product model.
1080p, 60fps: Records video in 1080p resolution at 60 frames
per second.
NOTE: 1080p resolution at 60 frames per second is not
available for the Garmin Dash Cam 45 product model.
1080p, 30fps, HDR: Records video in 1080p resolution at 30
frames per second using high dynamic range (HDR) imaging.
HDR imaging records multiple exposure levels for each frame
and can improve video clarity in high contrast or low-light
conditions.
Travelapse
Voice Control
NOTE: The voice control feature is not available for the Garmin
Dash Cam 45 product model.
The voice control feature allows you to control your camera by
saying words and commands.
NOTE: The voice control feature is not available for all
languages. You can use this feature while the interface is set to
an unsupported language, but you must speak the commands in
English.
Controlling the Camera Using Voice
Commands
NOTE: The voice control feature is not available for the Garmin
Dash Cam 45 product model.
1 Say OK, Garmin to activate the voice control feature.
The camera plays a tone and starts listening for a command.
2 Say a command:
• To save a video, say Save Video.
• To take a photo, say Take a Photo or Take a Picture.
• To record audio with the video, say Record Audio.
• To record video without audio, say Stop Audio.
• To start Travelapse, say Start Travelapse.
• To stop Travelapse, say Stop Travelapse.
The camera plays a tone when it recognizes your command.
Turning Voice Control On or Off
Select
> Voice Control > Settings > Disable.
Voice Control Tips
• Speak in a normal voice directed at the device.
• Reduce background noise to increase the accuracy of the
voice recognition.
• Before each command, say OK, Garmin.
• Listen for a tone to confirm that the camera successfully
recognized a command.
Red Light and Speed Cameras
NOTICE
Garmin is not responsible for the accuracy of or the
consequences of using a red light or speed camera database.
NOTE: This feature is not available for all regions or product
models.
Information about red light and speed camera locations is
available in some areas for some product models. The device
alerts you when you approach a reported speed or red light
camera.
• To maintain an updated database of red light and speed
camera locations, you must purchase a subscription to
download and store safety camera data on your device. Go
to garmin.com/speedcameras to check availability and
compatibility, or to purchase a subscription or one-time
update. You can purchase a new region or extend an existing
subscription at any time.
• In some regions, some product bundles include pre-loaded
red light and speed camera data with lifetime updates.
• You can use the Garmin Express™ software (garmin.com
/express) to update the camera database stored on your
device. You should update your device frequently to receive
the most up-to-date camera information.
Forward Collision Warning System
WARNING
The forward collision warning system (FCWS) feature is for
information only and does not replace your responsibility to
observe all road and driving conditions, abide by all traffic
regulations, and use safe driving judgment at all times. The
FCWS relies on the camera to provide a warning of upcoming
vehicles and, as a result, may have limited functionality in low
visibility conditions. For more information, go to garmin.com
/warnings.
NOTE: This feature is not available in all areas or for all product
models.
The FCWS feature alerts you when the device detects that you
are not maintaining a safe distance between your vehicle and
the vehicle in front of you. The device determines your vehicle
speed using GPS, and it calculates an estimated safe following
distance based on your speed. The FCWS activates
automatically when your vehicle speed exceeds 48 km/hr
(30 mph).
When the device detects that you are too close to the vehicle
ahead of you, the device plays an audible alert, and a warning
appears on the screen.
Forward Collision Warning System
Performance Tips
Several factors affect the performance of the forward collision
warning system (FCWS). Some conditions may prevent the
FCWS feature from detecting a vehicle ahead of you.
• The FCWS feature activates only when your vehicle speed
exceeds 48 km/h (30 mph).
• The FCWS feature may not detect a vehicle ahead of you
when the camera's view of the vehicle is obscured by rain,
fog, snow, sun or headlight glare, or darkness.
• The FCWS feature may not function properly if the camera is
incorrectly aligned.
• The FCWS feature may not detect vehicles greater than 40 m
(130 ft.) away or closer than 5 m (16 ft.).
Lane Departure Warning System
WARNING
The lane departure warning system (LDWS) feature is for
information only and does not replace your responsibility to
observe all road and driving conditions, abide by all traffic
regulations, and use safe driving judgment at all times. The
LDWS relies on the camera to provide warnings for lane
markers and, as a result, may have limited functionality in low
visibility conditions. For more information, go to garmin.com
/warnings.
The LDWS feature alerts you when the device detects you may
be crossing a lane boundary unintentionally. For example, the
device alerts you if you cross some solid painted lane
boundaries or cross into an oncoming traffic lane. The LDWS
feature provides alerts only when your vehicle speed exceeds
64 km/h (40 mph). The alert appears on the left or right side of
the screen to indicate which lane boundary you crossed.
NOTE: For the best LDWS performance, you should set the
Camera Placement option to indicate the location of your device
in the vehicle.
Lane Departure Warning Performance Tips
Several factors affect the performance of the lane departure
warning system (LDWS). Some conditions may prevent the
LDWS feature from detecting lane departures.
• The LDWS feature provides alerts only when your vehicle
speed exceeds 64 km/h (40 mph).
• The LDWS feature does not provide alerts on certain types of
roads, such as highway ramps or merging lanes.
• The LDWS feature may not function properly if the camera is
incorrectly aligned.
• The LDWS feature may not function properly if the Camera
Placement option does not correctly indicate your vehicle
height or the placement of your device in the vehicle (Setting
the Camera Placement, page 2).
• The LDWS feature requires a clear, continuous view of the
lane divider lines.
◦ Lane departures may not be detected when divider lines
are obscured by rain, fog, snow, extreme shadows, sun or
headlight glare, road construction, or any other visual
obstruction.
Forward Collision Warning System
◦ Lane departures may not be detected if lane divider lines
are misaligned, missing, or heavily worn.
• The LDWS feature may not detect lane departures on
extremely wide, narrow, or winding roads.
Go Alert
The go alert plays a tone and displays an alert when stopped
traffic ahead of your vehicle starts moving again. This alert
appears only after the vehicle ahead has moved a substantial
distance and your vehicle has remained stopped. This can be
useful at stop lights or in traffic delays. This feature uses the
dash camera to detect the stopped or moving vehicle and
requires a clear view of the road.
Setup: Allows you to set the units of measure, time, and
language, and restore them to their default values.
About: Displays the software version number, the unit ID
number, and information about several other software
features.
Regulatory: Displays regulatory and compliance information.
Viewing Regulatory and Compliance Information
1. From the system settings, select Regulatory.
Device Setup
NOTICE
Deleted or overwritten files cannot be restored.
Select > Settings > System > Setup.
Units: Sets the unit of measure used for distances.
Time: Sets the time, date, and format for the time stamp.
Language: Sets all on-screen text to the selected language.
Restore: Restores all settings to the factory default values.
Device Information
Support and Updates
Dash Cam Settings
Camera Settings
Select > Settings > Camera.
Resolution: Adjusts the video resolution.
Event Detection: Turns on and off event detection (Event
Detection, page 2).
Record Audio: Turns on and off audio recording. This feature is
not available in all areas or for all product models.
Data Overlay: Adjusts the type of data displayed on videos and
pictures.
Record After Power Loss: Sets the amount of time that the
device continues to record video after power is turned off.
Format Card: Formats the memory card and deletes all videos,
photos, and data on the card.
Driver Assistance Settings
Select > Settings > Driver Assistance.
Camera Placement: Allows you to indicate the placement of
your device in the vehicle.
Forward Collision: Adjusts the sensitivity of the FCWS feature.
Go Alert: Turns on or off the go alert display and audible alerts
when traffic starts moving (Go Alert, page 5).
Lane Departure: Adjusts the lane boundary settings (Lane
Departure Warning System, page 4).
Proximity Alerts: Adjusts the audible proximity alerts.
System Settings
Select > Settings > System.
Volume: Adjusts the volume of the camera alerts and video
playback.
Brightness: Adjusts the viewfinder display brightness.
Color Mode: Allows you to select day or night color mode. If you
select the Auto option, the device automatically switches to
day or night colors based on the time of day.
Display Timeout: Allows you to specify whether the display
turns off during use or after one minute.
Go Alert
Garmin Express (garmin.com/express) provides easy access to
these services for Garmin devices.
• Product registration
• Product manuals
• Software updates
Setting Up Garmin Express
1 Connect the device to your computer using a USB cable.
2 Go to www.garmin.com/express.
3 Follow the on-screen instructions.
Resetting the Device
You can reset your device if it stops functioning.
Hold the power key for 12 seconds.
Specifications
Operating temperature
range
From -20° to 55°C (from -4° to 131°F)
Charging temperature
range
From 0° to 45°C (from 32° to 113°F)
Memory card
Class 10 or higher microSDHC up to 64 GB
Appendix
Changing the Fuse in the Vehicle Power
Cable
NOTICE
When replacing the fuse, do not lose any of the small pieces
and make sure they are put back in the proper position. The
vehicle power cable does not work unless it is assembled
correctly.
If your device does not charge in your vehicle, you may need to
replace the fuse located at the tip of the vehicle adapter.
1 Rotate the end piece À counter clockwise to unlock it.
TIP: You may need to use a coin to remove the end piece.
2 Remove the end piece, the silver tip Á, and the fuse Â.
3 Insert a new fast-blow fuse that has the same current, such
as 1 A or 2 A.
4 Place the silver tip in the end piece.
5 Push in the end piece and rotate it clockwise to lock it back
into the vehicle power cable Ã.
Troubleshooting
My camera feels warm while it is operating
It is normal for the camera to feel warm during typical use,
especially while it is recording high-resolution video or
transmitting a Wi‑Fi signal.
Troubleshooting
Index
advanced driver assistance system (ADAS) 4,
camera placement 2
cameras
dash cam 1
red light 3
speed 3
computer, connecting 2
customizing, settings 5
dash cam, memory card 1
device overview 1
driver alerts 5
event detection 2
forward collision warning system (FCWS) 4
fuse, changing 5
Garmin Express 5
registering the device 5
updating software 5
lane departure warning system (LDWS) 4
memory card 1
installing 1
microSD card 1
mounting, windshield 1
photos, viewing 3
power cables, changing the fuse 5
power key 2
product registration 5
red light cameras 3
registering the device 5
resetting, device 5
resolution 3
settings 3, 5
setup 1
software, updating 5
speed cameras 3
system 5
taking, photos 2
Travelapse 3
troubleshooting 6
video
deleting 3
photos, viewing 2
playing 2, 3
recording 2
virb mobile app 2, 3
voice control 3
tips 3
Index
support.garmin.com
1800 235 822
+43 (0) 820 220230
+ 32 2 672 52 54
0800 770 4960
1-866-429-9296
+385 1 5508 272
+385 1 5508 271
+420 221 985466
+420 221 985465
+ 45 4810 5050
+ 358 9 6937 9758
+ 331 55 69 33 99
+ 39 02 36 699699
(+52) 001-855-792-7671
0800 427 652
0800 0233937
+47 815 69 555
00800 4412 454
+44 2380 662 915
+35 1214 447 460
+386 4 27 92 500
0861 GARMIN (427 646)
+27 (0)11 251 9800
+34 93 275 44 97
+ 46 7744 52020
+886 2 2642-9199 ext 2
0808 238 0000
+44 870 850 1242
+49 (0) 89 858364880
zum Ortstarif - Mobilfunk kann
abweichen
913-397-8200
1-800-800-1020
March 2017
190-02164-00 _ 0A

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2017:01:23 15:52:27-06:00
Creator                         : AH XSL Formatter V6.2 MR5 for Windows (x64) : 6.2.7.18952 (2014/11/12 16:18JST)
Modify Date                     : 2017:01:23 16:01:45-06:00
Language                        : 
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : AH XSL Formatter V6.2 MR5 for Windows (x64) : 6.2.7.18952 (2014/11/12 16:18JST)
Metadata Date                   : 2017:01:23 16:01:45-06:00
Producer                        : Antenna House PDF Output Library 6.2.625 (Windows (x64))
Trapped                         : False
Format                          : application/pdf
Document ID                     : uuid:feb6085e-2c2a-4dee-adc7-881f1eb1a356
Instance ID                     : uuid:6f4569fe-d4c1-47e3-8feb-48868c00d747
Page Layout                     : SinglePage
Page Mode                       : UseOutlines
Page Count                      : 12

EXIF Metadata provided by EXIF.tools