Garmin A2784 Low Power Transmitter 2402-2480 MHz User Manual

Garmin International Inc Low Power Transmitter 2402-2480 MHz

Contents

User Manual

Quick Sta t Manual
DRAFT
Introduction
WARNING
See the Important Safety and Product
Information guide in the product box for product
warnings and other important information.
Always consult your physician before you begin
or modify any exercise program.
Device Overview
ÀStep bar T acks your step count and
displays your progress as a
percentage of your daily goal.
ÁMove
bar
Displays the amount of time
you are inactive.
ÂCrown Hold to enter pairing mode.
Press to sync data.
Pull and turn to set the time of
day.
Turning On the Device
Your device ships in low power mode.
1Push in the EXWWRQ.
2 Introduction
DRAFT
2Press the EXWWRQ until the step bar is in
motion.
Auto Goal
Your device creates a daily step goal
automatically, based on your previous activity
levels. As you move during the day, the device
shows your progress toward your daily goal.
Each segment on the step bar represents five
percent of your daily goal. You can sync your
data with the Garmin Connect™ Mobile app to
view your current step count.
If you choose not to use the auto goal feature,
you can set a personalized step goal on your
Garmin Connect account.
Move Bar
Sitting for prolonged periods of time can trigger
undesirable metabolic state changes. The
move bar reminds you to k p moving. After
one hour of inactivity, th move bar appears.
Additional segmen s appear after every 15
minutes of inactivity. After two hours of
inactivity, the move bar appears solid.
You can reset the move bar by walking a short
distance.
Pairing Your Smartphone
You should connect your device to a
smartphone to access the full features of the
device.
1Go to www.garminconnect.com/,
and download the Garmin Connect Mobile
app to your smartphone.
2Bring your smartphone within 3 m (10 ft.) of
your device.
3Open the Garmin Connect Mobile app.
Introduction 3
DRAFT
4Follow the on-screen instructions.
5On the device, hold the EXWWRQ for
3 seconds to enter pairing mode.
The step bar flashes while the device is
searching for your smartphone.
Syncing Your Data with the Garmin
Connect Mobile App
Your device periodically syncs activity tracking
data with the Garmin Connect Mobile app
automatically. You can also manually sync your
data at any time.
1Bring your smartphone within 3 m (10 ft.) of
your device.
2Press the crown for 1 second.
3Wait while your data syncs
The step bar is in motion while the data is
syncing.
4View your current data in the Garmin
Connect Mobile app.
Setting the Time
You must manually set the time on your watch.
The time on your watch operates independently
from the time on your smartphone. Your auto
goal and step bar are automatically reset at
midnight, based on the time of day on your
paired smartphone.
1Pull and turn the EXWWRQ to set the time on
your watch.
2Push in the EXWWRQ.
Battery Replacement
Your Garmin Connect account indicates when
the battery level is low on your device. Garmin®
4 Introduction
DRAFT
recommends that you take your device to a
professional watch repair person to replace the
battery.
Device Information
Temperature Specifications
Operating temperature range: From 0º to
45ºC (from 32º to 113ºF)
Getting the Owner's Manual
Go to www.garmin.com/manuals/.
Device Information 5
DRAFT
DRAFT
DRAFT
Garmin®, the Garmin logo, and ANT+® are trademarks of
Garmin Ltd. or its subsidiaries, registered in the USA and
other countries. Garmin Connect™ are
trademarks of Garmin Ltd. or its subsidiaries. These
trademarks may not be used without the express
permission of Garmin.
Other trademarks and trade names are those of their
respective owners.
M/N: A02784, AA2784
© 2016 Garmin Ltd. or its subsidiaries
www.garmin.com/support
Printed in Taiwan
February 2016 190-02027-91_02
DRAFT

Navigation menu