Garmin A3EVNX01 Wireless backup camera User Manual

Garmin International Inc Wireless backup camera

a href="https://usermanual.wiki/Garmin" itemprop="url"> Garmin >

User Manual

BC™ 20 Wireless Backup Camera Installation Instructions.............................................................. 2Instructions d'installation de la caméra de recul sans fil BC™  20.....................................................4BC™ Istruzioni di installazione della videocamera posteriore wireless 20........................................ 6Drahtlose Rückfahrkamera BC™  20 – Installationsanweisungen.................................................... 9BC™ Instrucciones de instalación de la cámara de seguridad trasera inalámbrica 20................... 12BC™ 20 Instruções de instalação da câmara de segurança sem fios............................................ 14BC™ 20 draadloze achteruitrijcamera installatie-instructies............................................................17BC™ 20 Instruktioner vedr. installation af trådløst bakkamera........................................................ 19BC™ 20 langattoman peruutuskameran asennusohjeet................................................................. 22Installeringsinstruksjoner for BC™ 20 trådløst ryggekamera...........................................................24BC™ 20 trådlös backkamera, installationsinstruktioner...................................................................26Instrukcja instalacji bezprzewodowej kamery cofania BC™ 20....................................................... 29Garmin International, Inc.1200 East 151st StreetOlathe, Kansas 66062, USAGarmin (Europe) Ltd.Liberty House, Hounsdown Business ParkSouthampton, Hampshire, SO40 9LR UKGarmin CorporationNo. 68, Zhangshu 2nd Road, Xizhi Dist.New Taipei City, 221, Taiwan (R.O.C.)Garmin® and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. BC™ is a trademark of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.July 2013 190-01600-90_0A Printed in Taiwan
BC™ 20 Wireless Backup Camera Installation Instructions WARNINGSee the Important Safety and Product Information guide in the GPS device product box for product warnings and other important information.Garmin® strongly recommends having an experienced installer with the proper knowledge of electrical systems install the device. Incorrectly wiring the power cable can result in damage to the vehicle or the battery and can cause bodily injury.When connecting the power cable, do not remove the in-line fuse holder. To prevent the possibility of injury or product damage caused by fire or overheating, the appropriate fuse must be in place as indicated in the product specifications. In addition, connecting the power cable without the appropriate fuse in place will void the product warranty. CAUTIONAlways wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding.NOTICEWhen drilling or cutting, always check what is on the opposite side of the surface.These installation instructions do not apply to a specific vehicle type, and are meant as a guide when installing this product on your vehicle. For questions specific to your vehicle, you should contact the vehicle manufacturer.Item DescriptionÀWireless camera PND mountThe PND device must be powered through this mount to communicate with the camera.ÁTransmitterÂCameraÃCamera mounting bracketTools Needed• Drill and 0.36 in. (9.09 mm, or size T) drill bit• #2 Phillips screwdriver• Screws, bolts, or cable ties (to secure the transmitter)• Solderless wire-splice connector or solder and heat-shrink tubing• RV sealant (optional)Camera Mounting ConsiderationsWhen selecting a location to mount the camera, observe these considerations.• You should test a mounting location before you permanently mount the camera.• Installing the camera higher on the back of the vehicle provides a better viewing angle.• The included bracket can be clipped onto a license plate or other similar surface, or it can be fastened to the back of the vehicle using the included self-tapping, panhead screws.Transmitter Location and Wiring ConsiderationsWhen selecting a location to install the wireless transmitter, observe these considerations.• You should test a proposed installation location before you permanently install the transmitter.• Although the transmitter can reliably transmit the video signal over approximately 45 ft. (13.5 m), the location of the transmitter can affect this range.◦ The closer you install the transmitter to the wireless camera PND mount, the more reliable the signal.◦ The transmitter provides the best signal when either flat surface À is pointing toward the wireless camera PND mount.◦ Dense metal or appliances Á in the path of the transmitter greatly reduce the transmission distance.◦ The fewer solid objects that exist between the path of the transmitter and the device, the more reliable the signal.• If the distance between the camera and the transmitter exceeds the length of the included cable, additional extension cables can be used. A 50 ft. (15 m) extension cable can be purchased, and more than one extension cable can be installed. See your Garmin dealer or go to www.garmin.com for more information.• The fuse holder located near the transmitter is not waterproof. Installing the fuse holder in a location that is exposed to the elements is not recommended.• The connector between the camera and the transmitter is not waterproof. If you make this connection in a location exposed to the elements, you must make sure that the connection is waterproof.Testing the Camera and Transmitter Location1Temporarily secure the camera in the preferred mounting location.2Temporarily place the transmitter in the preferred installation location, and connect it to power and to the camera.TIP: If you do not want to splice into the wiring of your vehicle for this test, you can connect the transmitter and camera to a 12 Vdc battery .3Test the transmitter for correct operation by applying power to the PND device using the wireless camera PND mount.If you do not see video on the device at the preferred installation location, move the transmitter to another location and test it again.4Repeat steps 2–3 until the transmitter operates correctly.5Test the camera view by observing the video on the device.6If the camera does not provide the optimal view for your vehicle, move it to another location and test it again.2
Download:
Mirror Download [FCC.gov]
Document ID2035851
Application IDvCQIo7NA9CDbIMFosKQM4w==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize164.3kB (2053766 bits)
Date Submitted2013-08-07 00:00:00
Date Available2013-08-09 00:00:00
Creation Date2017-10-26 08:57:09
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-10-26 08:57:09
Document TitleUser Manual
Document CreatorAH Formatter V5.3 MR3 (5,3,2011,1116) for Windows (x64)
FCC ID Filing: IPH-A3EVNX01

Navigation menu