Garmin Gpsmap 196 Users Manual 190 00283 01_0C

196 to the manual 4b53b980-875a-482e-a5b1-c99ca7a8fc7c

2015-01-29

: Garmin Garmin-Gpsmap-196-Users-Manual-216782 garmin-gpsmap-196-users-manual-216782 garmin pdf

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadGarmin Garmin-Gpsmap-196-Users-Manual- 190-00283-01_0C Garmin-gpsmap-196-users-manual
Open PDF In BrowserView PDF
GPSMAP 196 Keys
GPSMAP® 196 Quick Reference Guide

Zooms in.
Zooms out.
Cycles through the main pages in sequence and returns the
display from a submenu. Press and hold to switch between
Aviation, Land, and Water Modes.

Antenna
12-Level Gray scale LCD
Display with Backlight

Cycles through the main pages in reverse sequence, reverts to
the previous value in a data entry field, or cancels an
unintended function.
Backlit keypad for easy
nighttime operation

Battery Compartment

External power
connector
Port for optional
data card

Press the DIRECT TO D key to show the Goto window. You can then
select an airport, navaid, recent point, or user-defined point to navigate
to (Goto).
To Go To an airport or navaid:

1. Press the DIRECT TO D key to show the Goto Page. Use the
ROCKER to select the Aviation tab.

Shows the nearest airports, navaids, points of communication,
and airspace boundaries in Aviation Mode. In other modes (or
when pressed multiple times in Aviation Mode), shows the
Find Menu. While in Land Mode, press to show the Next Turn
Page.
Direct To starts a Goto using airports, navaids, recently used
waypoints, or user-created waypoints. Press and hold to show
additional information for the current destination (such as
communication frequency and runway data).
Press and hold to turn the unit on and off. Briefly press and
release to adjust the backlighting and contrast.
Selects menu options, enters data, pans the pointer on the
Map Page.

Using the NRST/Find Key
Press the NRST/FIND key in Aviation Mode, as discussed below, to
show the Nearest Pages. You can then select an airport, navaid, recent
point, or user-defined point to navigate to (Goto). In Automotive or
Marine Mode, press NRST/FIND to open the Find Menu.
To select an item as your destination from the Nearest
Pages:
1. Press NRST/FIND.

2. To select a different category, use the ROCKER to select the file
tab along the top of the page.

Selects a highlighted option, initiates entry, and then accepts
the selected value(s). Press and hold to mark a waypoint.
Shows options menu for the current page. Press twice to show
the Main Menu.

Antenna collapses
for storage. Be sure
the antenna is up
(as shown here)
to receive satellite
signals.

Using the Direct To Key

Go To Page—Aviation Tab

2. Select the identifier, facility name, or city field, and press ENTER.
Enter the identifier, facility name, or city.
3. Press ENTER when the waypoint is shown and highlighted.
4. With the on-screen Goto button highlighted, press ENTER.
A course is plotted from your present location to the selected
destination.

To Go To a recently used waypoint or user-created
waypoint:
1. On the Goto window, select the Recent or User tab.

2. Highlight a waypoint from the list, and press ENTER.
3. With the on-screen Goto button highlighted, press ENTER.
A course is plotted from your present location to the selected
destination.

Nearest Page: Airport tab

3. Use the ROCKER to highlight a waypoint on the list, and press
ENTER. The corresponding waypoint information page appears.
For airports, use the ROCKER to select the file tabs across the
top of the information pages and show the airport data.
4. Highlight Goto, and press ENTER to navigate to the point. Press
QUIT to return to the Nearest Pages. You can also highlight any
of the on-screen buttons to perform that action, such as Delete or
Show Map.

© Copyright 2002, 2005 Garmin Ltd. or its subsidiaries
190-00283-01 Rev C

Printed in Taiwan

Creating and Using a Flight Plan (Route)
To create and use a route:

1.
2.
3.
4.

Press MENU twice to show the Main Menu.
Highlight Route from the vertical list of tabs.
Highlight the first available blank route slot, and press ENTER.
Press ENTER to find items to add to the route.
Identifier
Facility
Name

To select and navigate an approach for a saved route:

1. Press MENU twice, and highlight Route from the vertical list of
tabs.
2. Highlight the name of the route, and press ENTER.
3. Press MENU to open the options menu. Highlight Select
Approach, and press ENTER.
4. Use the ROCKER to select the approach from the window, and
press ENTER.

To select and navigate an approach for the destination
airport:

City
Route Tab of the
Main Menu

Selecting an Approach

Adding Points to the route.

5. Select the identifier, facility name, or city field, and press ENTER.
Enter the identifier, facility name, or city.
6. Press ENTER when the point is shown.
7. With the on-screen OK button highlighted, press ENTER. That
point is added to the route.
8. When you are finished adding points to your route, press QUIT
to view the Route tab again. The route you just created is
highlighted.
9. Press MENU, select Activate Route, and press ENTER to start
navigating your route.

1. Press DIRECT TO D to open the Goto window.
2. Press MENU to open the options menu. Highlight Select
Approach, and press ENTER.
3. Use the ROCKER to select the approach from the pop-up window,
and press ENTER. A “Vectors?” window appears.

Marking a Waypoint
To mark your present location:

1. Press and hold ENTER/MARK until the New Waypoint Page
appears.
2. To accept the waypoint with the default name and symbol,
highlight OK, and press ENTER/MARK.
To change the any information on the New Waypoint Page,
highlight the appropriate field, and press ENTER/MARK. After
entering and confirming your changes, highlight OK, and press
ENTER/MARK.

New Waypoint Page

To create a new waypoint using the Map Page:

Go To Page
Options Menu

Go To Page
Selecting an Approach

4. Use the ROCKER to select Yes, and press ENTER. The
GPSMAP 196 removes the destination airport from the Goto
window (not your flight plan or route) and replaces it with the
approach waypoints.

1. Press PAGE until the Map Page appears.
2. Move the pointer to the map location or feature.
3. Press ENTER and quickly release to capture the pointer’s
location.
If you highlight a map feature, an information page is shown after
you press ENTER. Use the ROCKER to highlight Save, and press
ENTER to save the item as a waypoint. The New Map Waypoint
Page appears.
4. To accept the waypoint with the default name and symbol,
highlight OK, and press ENTER.

Finding a Land or Marine Item
When in Land Mode and Water Mode, pressing NRST/FIND shows the
Find Menu. To show the Find Menu in Aviation Mode, press NRST/
FIND multiple times.
To find a waypoint or other item from your current location:

1. From any page, press NRST/FIND.
2. Highlight a category from the list, and press ENTER.
3. Highlight an item from the list, and press ENTER.

Find Menu

Navaid search result list.

To start a Go To from the Find Menu:

1. Select a waypoint or point of interest as described previously.
Press ENTER. The Waypoint Review Page automatically appears.
2. With the Goto button highlighted, press ENTER to begin
navigation.
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Modify Date                     : 2005:08:26 17:00:23-05:00
Create Date                     : 2005:08:22 12:54:32Z
Trapped                         : False
Creator                         : Adobe InDesign CS (3.0.1)
Producer                        : Adobe PDF Library 6.0
Page Count                      : 2
About                           : uuid:782bee71-1936-4a1c-a2cf-d717e82fd21e
Creation Date                   : 2005:08:22 12:54:32Z
Mod Date                        : 2005:08:26 17:00:23-05:00
Metadata Date                   : 2005:08:26 17:00:23-05:00
Creator Tool                    : Adobe InDesign CS (3.0.1)
Version ID                      : 1
Rendition Class                 : proof:pdf
Derived From Instance ID        : f7e910f2-131b-11da-8599-caedb51fa4fa
Derived From Document ID        : adobe:docid:indd:0ddbe8f7-0aa1-11da-9d20-c830b07d6f7b
Derived From Version ID         : 1
Document ID                     : adobe:docid:indd:cb82d150-1335-11da-8599-caedb51fa4fa
Manifest Link Form              : ReferenceStream
Manifest Reference Instance ID  : uuid:7f0d6da2-1333-11da-860f-ec52ab301892
Manifest Reference Document ID  : adobe:docid:photoshop:7f0d6da1-1333-11da-860f-ec52ab301892
Format                          : application/pdf
Title                           : 190-00283-01_0C.indd
EXIF Metadata provided by EXIF.tools

Navigation menu