Garmin Nuvi 2597Lmt Owners Manual

: Garmin Garmin-Nuvi-2597Lmt-Owners-Manual-119940 garmin-nuvi-2597lmt-owners-manual-119940 garmin pdf

Open the PDF directly: View PDF .
Page Count: 22

nüvi® 2407/2408/2507/2508 Series

Owner’s Manual

March 2013 190-01579-00_0A Printed in the USA

All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the

right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such

changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.

Garmin®, nüvi®, and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not

be used without the express permission of Garmin.

BaseCamp™, HomePort™, MapSource®, myGarmin™, ecoRoute™, myTrends™, trafficTrends™, nüMaps Guarantee™, and nüMaps Lifetime™ are trademarks

of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such name by Garmin is under license. microSD™ and the

microSDHC logo are trademarks of SD-3C, LLC. Windows®, Windows Vista®, and Windows XP® are registered trademarks of Microsoft Corporation in the

United States and other countries. Mac® is a trademark of Apple Inc. HD Radio™ and the HD logo are trademarks of iBiquity Digital Corporation. HD Radio

Technology manufactured under license from iBiquity Digital Corporation. U.S. and foreign patents.

Table of Contents

Getting Started............................................................... 1

Connecting the Device to Vehicle Power................................... 1

Support and Updates................................................................. 1

Setting Up Garmin Express................................................... 1

nüMaps Guarantee™............................................................ 1

Lifetime Subscriptions........................................................... 1

Entering and Exiting Sleep Mode............................................... 1

Turning Off the Device............................................................... 1

Resetting the Device............................................................. 1

Acquiring GPS Signals............................................................... 1

Adjusting the Screen Brightness................................................ 1

Adjusting the Volume................................................................. 1

About Automatic Volume....................................................... 1

Status Bar Icons......................................................................... 2

Viewing GPS Signal Status................................................... 2

Battery Information................................................................ 2

Setting the Time.................................................................... 2

Using the On-Screen Buttons.................................................... 2

Using the On-Screen Keyboard................................................. 2

Locations........................................................................ 2

Finding Locations....................................................................... 2

Finding a Location by Category............................................ 2

Finding a Location Using the Search Bar.............................. 2

Changing the Search Area.................................................... 2

Finding a Location by Browsing the Map.............................. 2

Finding an Address............................................................... 3

Finding Recently Found Destinations................................... 3

Finding Parking..................................................................... 3

Search Tools......................................................................... 3

Saving Locations........................................................................ 3

Saving a Location.................................................................. 3

Saving Your Current Location............................................... 3

Saving a Home Location....................................................... 3

Editing a Saved Location...................................................... 3

Assigning Categories to a Saved Location........................... 3

Deleting a Saved Location.................................................... 4

Setting a Simulated Location..................................................... 4

Adding a Shortcut...................................................................... 4

Removing a Shortcut............................................................. 4

Custom Points of Interest........................................................... 4

Installing POI Loader Software............................................. 4

Using the POI Loader Help Files........................................... 4

Finding Custom POIs............................................................ 4

Navigation.......................................................................4

Starting a Route......................................................................... 4

Previewing Multiple Routes................................................... 4

Changing the Route Calculation Mode................................. 4

Starting a Route to a Saved Location................................... 4

Your Route on the Map.............................................................. 4

Using the Navigation Map..................................................... 5

Adding a Point to a Route..................................................... 5

Taking a Detour..................................................................... 5

Stopping the Route............................................................... 5

Viewing Route Activity............................................................... 5

Viewing a List of Turns.......................................................... 5

Viewing the Next Turn........................................................... 5

Viewing Junctions................................................................. 5

About Up Ahead......................................................................... 5

Finding Up Ahead Services................................................... 5

Customizing the Up Ahead Categories................................. 5

Trip Information.......................................................................... 5

Viewing Trip Data from the Map............................................ 5

Viewing the Trip Information Page........................................ 5

Viewing the Trip Log............................................................. 6

Resetting Trip Information..................................................... 6

Using Suggested Routes........................................................... 6

Viewing Current Location Information........................................ 6

Finding Nearby Services....................................................... 6

Getting Directions to Your Current Location......................... 6

Avoiding Road Features............................................................ 6

About Custom Avoidances......................................................... 6

Avoiding an Area................................................................... 6

Avoiding a Road.................................................................... 6

Disabling a Custom Avoidance............................................. 6

Deleting Custom Avoidances................................................ 6

Customizing the Map................................................................. 6

Customizing the Map Tools................................................... 6

Customizing the Map Layers................................................. 6

Changing the Map Data Field............................................... 6

Changing the Map Perspective............................................. 6

Safety Cameras......................................................................... 7

Traffic.............................................................................. 7

Receiving Traffic Data Using a Traffic Receiver........................ 7

Viewing Upcoming Traffic.......................................................... 7

Viewing Traffic on the Map.................................................... 7

Searching for Traffic Incidents.............................................. 7

Traffic on Your Route................................................................. 7

Taking an Alternate Route.................................................... 7

About Traffic Cameras............................................................... 7

Saving a Traffic Camera....................................................... 7

Viewing a Traffic Camera...................................................... 7

About Traffic Subscriptions........................................................ 8

Subscription Activation.......................................................... 8

Viewing Traffic Subscriptions................................................ 8

Adding a Subscription........................................................... 8

trafficTrends™........................................................................... 8

Disabling trafficTrends.......................................................... 8

Enabling Traffic.......................................................................... 8

Voice Command............................................................. 8

Setting the Wakeup Phrase....................................................... 8

Activating Voice Command........................................................ 8

Voice Command Tips................................................................. 8

Starting a Route Using Voice Command................................... 8

Muting Instructions..................................................................... 8

Disabling Voice Command......................................................... 8

Hands-Free Phone Calls................................................8

About Hands-Free Calling.......................................................... 8

Enabling Bluetooth Wireless Technology.............................. 8

Pairing Your Phone.................................................................... 8

Tips After Pairing the Devices............................................... 9

Disconnecting Your Phone.................................................... 9

Deleting a Paired Phone....................................................... 9

Placing a Call............................................................................. 9

Dialing a Number.................................................................. 9

Calling a Contact in Your Phone Book.................................. 9

Calling a Location.................................................................. 9

Receiving a Call......................................................................... 9

Using the Call History................................................................ 9

Using In-Call Options................................................................. 9

Saving a Home Phone Number................................................. 9

Calling Home......................................................................... 9

Using the Apps...............................................................9

Using Help................................................................................. 9

Searching Help Topics.......................................................... 9

About Smartphone Link............................................................. 9

Downloading Smartphone Link............................................. 9

Connecting to Smartphone Link.......................................... 10

Sending a Location from Your Phone to Your Device......... 10

Table of Contents i

Disabling Calls While Connected to Smartphone Link........ 10

Garmin Live Services............................................................... 10

Subscribing to Garmin Live Services.................................. 10

About ecoRoute....................................................................... 10

ecoRoute HD Accessory..................................................... 10

Setting Up the Vehicle......................................................... 10

Changing the Fuel Price...................................................... 10

Calibrating the Fuel Economy............................................. 10

About ecoChallenge............................................................ 10

Viewing Fuel Economy Information..................................... 11

Mileage Reports.................................................................. 11

Resetting ecoRoute Information.......................................... 11

Viewing myGarmin Messages................................................. 11

Viewing the Weather Forecast................................................. 11

Viewing Weather Near a Different City............................... 11

Viewing the Weather Radar................................................ 11

Viewing Weather Alerts....................................................... 11

Checking Road Conditions.................................................. 11

Planning a Trip......................................................................... 11

Scheduling a Trip................................................................ 11

Navigating to a Saved Trip.................................................. 11

Editing a Saved Trip............................................................ 11

Viewing Previous Routes and Destinations............................. 11

Data Management........................................................ 12

File Types................................................................................ 12

About Memory Cards............................................................... 12

Installing a Memory Card.................................................... 12

Connecting the Device to Your Computer............................... 12

Transferring Data From Your Computer.................................. 12

Disconnecting the USB Cable............................................. 12

Customizing the Device.............................................. 12

Map and Vehicle Settings........................................................ 12

Enabling Maps.................................................................... 12

Navigation Settings.................................................................. 12

Route Preferences.............................................................. 12

Display Settings....................................................................... 12

Bluetooth Settings.................................................................... 13

Disabling Bluetooth............................................................. 13

Traffic Settings......................................................................... 13

Units and Time Settings........................................................... 13

Language and Keyboard Settings............................................ 13

Device and Privacy Settings.................................................... 13

Proximity Alerts Settings.......................................................... 13

Restoring Settings.................................................................... 13

Appendix.......................................................................13

Power Cables........................................................................... 13

Charging the Device............................................................ 13

Changing the Fuse in the Vehicle Power Cable.................. 13

About Device Care................................................................... 13

Cleaning the Outer Casing.................................................. 14

Cleaning the Touchscreen.................................................. 14

Avoiding Theft..................................................................... 14

Mounting on Your Dashboard.................................................. 14

Removing the Device, Mount, and Suction Cup...................... 14

Removing the Device from the Mount................................. 14

Removing the Mount from the Suction Cup........................ 14

Removing the Suction Cup from the Windshield................. 14

Purchasing Additional Maps.................................................... 14

Purchasing Accessories........................................................... 14

Troubleshooting...........................................................14

The suction cup will not stay on my windshield....................... 14

My device is not acquiring satellite signals.............................. 14

The device does not charge in my vehicle............................... 14

My battery does not stay charged for very long....................... 14

The battery gauge does not seem accurate............................ 14

My device does not appear as a removable drive on my

computer.................................................................................. 14

My device does not appear as a portable device on my

computer.................................................................................. 14

My device does not appear as either a portable device or a

removable drive or volume on my computer............................ 14

My phone will not connect to the device.................................. 15

Index..............................................................................16

ii Table of Contents

Getting Started

WARNING

See the Important Safety and Product Information guide in the

product box for product warnings and other important

information.

Connecting the Device to Vehicle Power

WARNING

This product contains a lithium-ion battery. To prevent the

possibility of personal injury or product damage caused by

battery exposure to extreme heat, store the device out of direct

sunlight.

Before you use your device on battery power, you should

charge it.

1Plug the vehicle power cable À into the USB port on the

device.

2Press the mount Á onto the suction cup  until it snaps into

place.

3Press the suction cup to the windshield, and flip the lever Ã

back toward the windshield.

4Fit the tab on the top of the mount into the slot on the back of

the device.

5Press the bottom of the mount into the device until it clicks.

6Plug the other end of the vehicle power cable into a power

outlet in your vehicle.

Support and Updates

Garmin® Express provides easy access to these services for

your device.

• Product registration

• Software and map updates

• Product manuals

• Vehicles, voices, and other extras

Setting Up Garmin Express

1Plug the small end of the USB cable into the port on the

device.

2Plug the larger end of the USB cable into an available USB

port on your computer.

3Go to www.garmin.com/express.

4Follow the on-screen instructions.

nüMaps Guarantee™

Your device may be eligible for a free map update within 90

days of first acquiring satellites while driving. Go to

www.garmin.com/numaps for terms and conditions.

Lifetime Subscriptions

Some models include subscriptions to lifetime features. For

more information, go to www.garmin.com/lmt.

LT: This model includes a lifetime traffic subscription and a

traffic receiver.

LM: This model includes a nüMaps Lifetime™ subscription,

which provides quarterly map updates for the useful life of

your device. For terms and conditions go to

www.garmin.com/us/maps/numaps_lifetime.

LMT: This model includes a nüMaps Lifetime subscription,

lifetime traffic subscription, and a traffic receiver.

Activating Lifetime Maps

1Go to www.garmin.com/express.

2Follow the on-screen instructions.

NOTE: If you register the device, you can receive e-mail

notifications when a map update is available.

Entering and Exiting Sleep Mode

You can use sleep mode to conserve battery power when your

device is not in use. While in sleep mode, your device uses very

little power and can wake instantly for use.

TIP: You can save power by putting the device in sleep mode

while charging the battery.

Press the power key À.

Turning Off the Device

1Hold the power key until a prompt appears on the screen.

The prompt appears after five seconds. If you release the

power key before the prompt appears, the device enters

sleep mode.

2Select Off.

Resetting the Device

You can reset your device if it stops functioning.

Hold the power key for 10 seconds.

Acquiring GPS Signals

To navigate with your device, you must acquire satellites. in

the status bar indicates the satellite signal strength (see

page 2). Acquiring satellites can take several minutes.

1Turn on the device.

2If necessary, go outdoors to an open area, away from tall

buildings and trees.

3If necessary, hold to view detailed information about the

satellite signals.

Adjusting the Screen Brightness

1Select Settings > Display > Brightness.

2Use the slider bar to adjust the brightness.

Adjusting the Volume

1Select Volume.

2Select an option:

• Use the slider bar to adjust the volume.

• Select to mute the device.

• Select for additional options.

About Automatic Volume

On devices with hands-free calling, automatic volume allows the

device to adjust the volume level based on the background

noise in the vehicle (page 8).

Getting Started 1

Automatic volume control lowers the volume of the device when

background noise is low and raises the volume level when

background noise increases.

Enabling Automatic Volume

Your device can increase or decrease the volume automatically

based on the level of background noise.

1Select Volume > .

2If necessary, select Automatic Volume.

3Select Enabled.

Status Bar Icons

The status bar is located at the top of the main menu. The

status bar icons display information about features on the

device. You can select some icons to change settings or view

additional information.

GPS signal status

Bluetooth® technology status (appears when Bluetooth is

enabled)

Current time

Battery status

Connected to Smartphone Link

Temperature

Viewing GPS Signal Status

Hold for three seconds.

Battery Information

After the device is connected to power, it begins to charge.

in the status bar indicates the status of the internal battery.

To increase the accuracy of the battery gauge, you should fully

discharge the battery and then fully charge it. Do not unplug the

device until it is fully charged.

Setting the Time

NOTE: You can select Automatic to automatically set the time

each time the device is powered on.

1Select .

2Scroll the numbers to set the time.

Using the On-Screen Buttons

• Select to return to the previous menu screen.

• Hold to quickly return to the main menu.

• Select or to see more choices.

• Hold or to scroll faster.

• Select to see a menu of options for the current screen.

Using the On-Screen Keyboard

See "Language and Keyboard Settings" to change the keyboard

layout (page 13).

• Select to delete a search entry.

• Select to delete a character.

• Select to change the keyboard language mode.

• Select to enter special characters, such as punctuation

marks.

• Select to change character capitalization.

Locations

The detailed maps loaded in your device contain locations, such

as restaurants, hotels, auto services, and detailed street

information. You can use categories to browse for nearby

businesses and attractions. You can also search for addresses,

coordinates, cities, and intersections.

Finding Locations

Finding a Location by Category

1Select Where To?.

2Select a category, or select Categories.

3If necessary, select a subcategory.

4Select a location.

Searching Within a Category

After you have performed a search for a point of interest, certain

categories may display a Quick Search list that shows the last

three destinations you selected.

1Select Where To?.

2Select a category, or select Categories.

3Select a category.

4If applicable, select a destination from the Quick Search list.

5If necessary, select the appropriate destination.

Finding a Location Using the Search Bar

You can use the search bar to search for locations by entering a

category, brand name, address, or city name.

1Select Where To?.

2Select Enter Search in the search bar.

3Enter all or part of the search term.

Suggested search terms appear below the search bar.

4Select an option:

• To search for a type of business, enter a category name

(for example, "movie theaters").

• To search for a business name, enter all or part of the

name.

• To search for an address near you, enter the street

number and street name.

• To search for an address in another city, enter the street

number, street name, city, and state.

• To search for a city, enter the city and state.

• To search for coordinates, enter latitude and longitude

coordinates.

5Select an option:

• To search using a suggested search term, select the

term.

• To search using the text you entered, select .

6If necessary, select a location.

Changing the Search Area

1From the main menu, select Where To?.

2Select Searching Near.

3Select an option.

Finding a Location by Browsing the Map

Before you can find places included in the map data, such as

restaurants, hospitals, and fuel stations, you must enable the

map layer for places along the road (page 6).

2 Locations

1Select View Map.

2Drag and zoom the map to display the area to search.

3If necessary, select , and select a category icon to view

only a specific category of places.

Location markers ( or a blue dot) appear on the map.

4Select an option:

• Select a location marker.

• Select a point, such as a street, intersection, or address

location.

5If necessary, select the location description to view additional

information.

Finding an Address

NOTE: The order of the steps may change depending on the

map data loaded on your device.

1Select Where To? > Address.

2Enter the address number, and select Done.

3Enter the street name, and select Next.

4If necessary, select Searching Near to change the city,

state, or province.

5If necessary, select the city, the state, or the province.

6If necessary, select the address.

Finding Recently Found Destinations

Your device stores the last 50 destinations you have found.

1Select Where To? > Recent.

2Select a location.

Clearing the List of Recently Found Locations

Select Where To? > Recent > > Clear > Yes.

Finding Parking

1Select Where To? > Categories > Parking.

2Select a parking location.

Finding Your Last Parking Spot

When you disconnect the device from vehicle power while the

device is on, your current location is saved as a parking spot.

Select Apps > Last Spot.

Search Tools

Search tools allow you to search for specific types of locations

by responding to on-screen prompts.

Finding an Intersection

1Select Where To? > Categories > Intersections.

2Select an option:

• Select a state or province.

• To change the country, state, or province, select State or

Country, and enter a name.

3Enter the first street name, and select Next.

4If necessary, select the street.

5Enter the second street name, and select Next.

6If necessary, select the street.

7If necessary, select the intersection.

Finding a City

1Select Where To? > Categories > Cities.

2Select Enter Search.

3Enter a city name, and select .

4Select a city.

Finding a Location Using Coordinates

You can find a location using latitude and longitude coordinates.

This can be helpful when geocaching.

1Select Where To? > Categories > Coordinates.

2If necessary, select , and change the coordinate format or

datum.

3Select the latitude coordinate.

4Enter the new coordinate, and select Done.

5Select the longitude coordinate.

6Enter the new coordinate, and select Done.

7Select View on Map.

Saving Locations

Saving a Location

1Search for a location (page 2).

2From the search results, select a location.

3Select .

4Select > Save.

5If necessary, enter a name, and select Done.

Saving Your Current Location

1From the map, select the vehicle icon.

2Select Save.

3Enter a name, and select Done.

4Select OK.

Saving a Home Location

You can set your home location for the location you return to

most often.

1Select Where To? > > Set Home Location.

2Select Enter My Address, Use Current Location, or

Recently Found.

The location is saved as "Home" in the Saved menu.

Going Home

Select Where To? > Go Home.

Editing Your Home Location Information

1Select Where To? > Saved > Home.

2Select .

3Select > Edit.

4Enter your changes.

5Select Done.

Editing a Saved Location

1Select Where To? > Saved.

2If necessary, select a category.

3Select a location.

4Select .

5Select > Edit.

6Select an option:

• Select Name.

• Select Phone Number.

• Select Categories to assign categories to the saved

location.

• Select Change Map Symbol to change the symbol used

to mark the saved location on a map.

7Edit the information.

8Select Done.

Assigning Categories to a Saved Location

You can add custom categories to organize your saved

locations.

NOTE: Categories appear in the saved locations menu after

you have saved at least 12 locations.

Locations 3

1Select Where To? > Saved.

2Select a location.

3Select .

4Select > Edit > Categories.

5Enter one or more category names, separated by commas.

6If necessary, select a suggested category.

7Select Done.

Deleting a Saved Location

NOTE: Deleted locations cannot be recovered.

1Select Where To? > Saved.

2Select > Delete Saved Places.

3Select the box next to the saved locations to delete, and

select Delete.

Setting a Simulated Location

If you are indoors or not receiving satellite signals, you can use

the GPS to set a simulated location.

1Select Settings > Navigation > GPS Simulator.

2From the main menu, select View Map.

3Tap the map twice to select an area.

The address of the location appears at the bottom of the

screen.

4Select the location description.

5Select Set Location.

Adding a Shortcut

You can add shortcuts to the Where To? menu. A shortcut can

point to a location, a category, or a search tool.

The Where To? menu can contain up to 36 shortcut icons.

1Select Where To? > Add Shortcut.

2Select an item.

Removing a Shortcut

1Select Where To? > > Remove Shortcut(s).

2Select the shortcut to remove.

3Select the shortcut again to confirm.

Custom Points of Interest

Custom POIs are customized points on the map. They can

contain alerts that let you know if you are near a designated

point or if you are traveling faster than a specified speed.

Installing POI Loader Software

You can create or download custom POI lists on your computer

and install them on your device using POI Loader software.

1Go to http://www.garmin.com/extras.

2Click Services > POI Loader.

3Install the POI Loader onto your computer.

Using the POI Loader Help Files

For more information on the POI loader, refer to the Help file.

With the POI loader open, click Help.

Finding Custom POIs

Before you can find custom POIs, you must load custom POIs

on your device using the POI Loader software (page 4).

1Select Where To? > Categories.

2Scroll to the Other Categories section, and select a category.

Navigation

Starting a Route

1Search for a location (page 2).

2Select a location.

3Select Go!.

Previewing Multiple Routes

1Search for a location (page 2).

2From the search results, select a location.

3Select Routes.

4Select a route.

Changing the Route Calculation Mode

The route calculation is based on road speeds and vehicle

acceleration data for a given route. The calculation mode affects

only automobile routes.

Select Settings > Navigation > Calculation Mode.

• Select Faster Time to calculate routes that are faster to

drive but can be longer in distance.

• Select Shorter Distance to calculate routes that are

shorter in distance but can take more time to drive.

• Select Off Road to calculate point-to-point routes (without

roads).

Navigating Off Road

If you are not following roadways as you navigate, you can use

Off Road mode.

1Select Settings > Navigation.

2Select Calculation Mode > Off Road > Save.

The next route will be calculated as a straight line to the

location.

Starting a Route to a Saved Location

1Select Where To? > Saved.

2If necessary, select a category, or select All Saved Places.

3Select a location.

4Select Go!.

Your Route on the Map

NOTICE

The speed limit feature is for information only and does not

replace your responsibility to abide by all posted speed limit

signs and to use safe driving judgment at all times. Garmin will

not be responsible for any traffic fines or citations you receive

for failing to follow all applicable traffic laws and signs.

The route is marked with a magenta line. A checkered flag

marks your destination.

As you travel, the device guides you to the destination with

voice prompts, arrows on the map, and directions at the top of

the map. If you depart from the original route, the device

recalculates the route and provides new directions.

A data field displaying the current speed limit may appear as

you travel on major roadways.

4 Navigation

Using the Navigation Map

1Select View Map.

2Select anywhere on the map.

3Select an option:

• To zoom in or out, select or .

• To switch between North Up and 3-D views, select .

• To view specific categories when not navigating a route,

select .

• To center the map on your current location, select .

Adding a Point to a Route

Before you can add a stop, you must be navigating a route.

1From the map, select > Where To?.

2Search for the extra stop.

3Select the stop from the search results.

4Select Go!.

5Select Add to Active Route.

Taking a Detour

Before you can take a detour, you must add the detour tool to

the map tools menu (page 6).

You can take a detour for a specified distance along your route

or detour around specific roads. This is useful if you encounter

construction zones, closed roads, or poor road conditions.

1While navigating a route, from the map select > Detour.

2Select an option.

• To detour your route for a specific distance, select 0.5 mi,

2 mi, or 5 mi.

• To detour around a specific road on the route, select .

3If necessary, select a road to detour around.

Stopping the Route

From the map, select > .

Viewing Route Activity

Viewing a List of Turns

While navigating a route, you can view all of the turns and

maneuvers for your entire route and the distance between turns.

1While navigating a route, select the text bar on the top of the

map.

2Select a turn.

The details for the turn appear. If available, an image of the

junction appears for junctions on major roadways.

Viewing the Entire Route on the Map

1While navigating a route, select the navigation bar at the top

of the map.

2Select > Map.

Viewing the Next Turn

While navigating an automobile route, a preview of the next

turn, lane change, or other maneuver appears in the upper-left

corner of the map.

The preview includes the distance to the turn or maneuver and

the lane in which you should be traveling, if available.

From the map, select to view the next turn on the map.

Active Lane Guidance

As you approach a turn while navigating a route, a detailed

simulation of the road appears beside the map. A magenta line

appears on the proper lane for the turn.

Viewing Junctions

While navigating a route, you can view the junctions on major

roadways. When you approach a junction in a route, the image

of that junction appears briefly, if available.

From the map, select to view the junction, if available.

About Up Ahead

You can view upcoming businesses and services along your

route or the road on which you are traveling.

Services are listed under tabs by category.

Gas

Food

Lodging

Restrooms

Parking

Banks and ATMs

Finding Up Ahead Services

1From the map, select > Up Ahead.

2Select a tab.

3Select a point of interest.

Customizing the Up Ahead Categories

You can change the services you search for, re-arrange the

order of the service icons, and search for a specific business or

category.

1From the map, select > Up Ahead.

2Select a service icon.

3Select .

4Select an option:

• To rearrange the order of the services, select and drag an

arrow on the right up or down.

• To change the services displayed, select a service, and

select a different service.

• To search for a specific business or category, select a

service, select Custom Search, and enter the name of

the business or category.

5Select Done.

Trip Information

Viewing Trip Data from the Map

Before you can view trip data on the map, you must add the tool

to the map tools menu. See page 6 .

From the map, select > Trip Data.

Customizing the Trip Data Fields

Before you can customize the data that appears in the trip data

fields on the map, you must add the Trip Data tool to the map

tools menu (page 6).

1Select View Map.

2Select > Trip Data.

3Select a trip data field.

4Select an option.

The new trip data field appears in the trip data list.

Viewing the Trip Information Page

The trip information page displays your present speed and

provides statistics about your trip.

NOTE: If you make frequent stops, leave the device turned on,

so it can accurately measure elapsed time during the trip.

From the map, select Speed.

Navigation 5

Viewing the Trip Log

Your device keeps a trip log, which is a record of the path you

have traveled.

1Select Settings > Map & Vehicle > Map Layers.

2Select the Trip Log check box.

Resetting Trip Information

1From the map, select Speed .

2Select > Reset Field(s).

3Select an option:

• When not navigating a route, select Select All to reset

every data field except the speedometer, on the first

page.

• Select Reset Trip Data to reset the information on the trip

computer.

• Select Reset Max. Speed to reset the maximum speed.

• Select Reset Trip B to reset the odometer.

Using Suggested Routes

Before you can use this feature, you must save at least one

location and enable the travel history feature (page 13).

Using the myTrends™ feature, your device predicts your

destination based on your travel history, the day of the week,

and the time of day. After you have driven to a saved location

several times, the location may appear in the navigation bar on

the map, along with the estimated time of travel, and traffic

information.

Select the navigation bar to view a suggested route to the

location.

Viewing Current Location Information

You can use the Where Am I? page to view information about

your current location. This feature is helpful if you need to tell

emergency personnel your location.

From the map, select the vehicle.

Finding Nearby Services

You can use the Where Am I? page to find nearby services,

such as fuel, hospitals or police stations.

1From the map, select the vehicle.

2Select a category.

Getting Directions to Your Current Location

If you need to tell another person how to get to your current

location, your device can give you a list of directions.

1From the map, select the vehicle.

2Select > Directions to Me.

3Select a starting location.

4Select Select.

Avoiding Road Features

1Select Settings > Navigation > Avoidances.

2Select the road features to avoid on your routes, and select

Save.

About Custom Avoidances

Custom avoidances allow you to avoid specific areas and

sections of road. You can enable and disable custom

avoidances as needed.

Avoiding an Area

1Select Settings > Navigation > Custom Avoidances.

2If necessary, select Add Avoidances.

3Select Add Avoid Area.

4Select the upper-left corner of the area to avoid, and select

Next.

5Select the lower-right corner of the area to avoid, and select

Next.

The selected area is shaded on the map.

6Select Done.

Avoiding a Road

1Select Settings > Navigation > Custom Avoidances.

2Select Add Avoid Road.

3Select the starting point of the section of road to avoid, and

select Next.

4Select the ending point of the road section, and select Next.

5Select Done.

Disabling a Custom Avoidance

You can disable a custom avoidance without deleting it.

1Select Settings > Navigation > Custom Avoidances.

2Select an avoidance.

3Select > Disable.

Deleting Custom Avoidances

1Select Settings > Navigation > Custom Avoidances.

2Select an option:

• To delete all custom avoidances, select .

• To delete one custom avoidance, select the avoidance,

and select > Delete.

Customizing the Map

Customizing the Map Tools

You can select the shortcuts that appear in the map tools menu.

1Select Settings > Map & Vehicle > Map Tools.

2Select the map tools to include in the menu.

3Select Save.

Customizing the Map Layers

You can customize which data appear on the map, such as

icons for points of interest and road conditions.

1Select Settings > Map & Vehicle > Map Layers.

2Select the layers to include on the map, and select Save.

Changing the Map Data Field

1From the map, select a data field.

NOTE: You cannot customize Speed.

2Select a type of data to display.

3Select Save.

Changing the Map Perspective

1Select Settings > Map & Vehicle > Driving Map View.

2Select an option:

• Select Track Up to display the map in two dimensions (2-

D), with your direction of travel at the top.

• Select North Up to display the map in 2-D with north at

the top.

6 Navigation

• Select 3-D to display the map in three dimensions.

Safety Cameras

NOTICE

Garmin is not responsible for the accuracy of or the

consequences of using a custom point of interest or a safety

camera database.

Safety camera information is available in some locations. Check

www.garmin.com/safetycameras for availability. For these

locations, you can purchase a subscription for safety camera

information. The subscription includes the locations of hundreds

of safety cameras. Your device alerts you when you are

approaching a safety camera and can warn you if you are

driving too fast. The data is updated at least weekly, so you can

update your device regularly to receive the most up-to-date

information.

You can purchase a new region or extend an existing

subscription at any time. Each region that you purchase has an

expiration date.

Traffic

NOTICE

Garmin is not responsible for the accuracy or timeliness of the

traffic information.

Traffic information may not be available in all areas or countries.

For information about traffic receivers and coverage areas, go

to www.garmin.com/traffic.

A traffic receiver is included in some packages, built into either

the vehicle power cable or the device, and is an optional

accessory for all models.

• Traffic alerts appear on the map when there are traffic

incidents along your route or in your area.

• The device must be connected to vehicle power to receive

traffic information.

• The powered traffic receiver and the device may need to be

in data range of a station transmitting traffic data to receive

traffic information.

• You do not need to activate the subscription included with

your device or traffic receiver.

• If your device includes an external traffic antenna, you

should always leave the external antenna plugged in for the

best traffic reception.

Receiving Traffic Data Using a Traffic

Receiver

NOTICE

Heated (metallized) windshields could degrade the performance

of the traffic receiver.

Before you can receive traffic data using a traffic receiver, you

must have a traffic-compatible power cable. If your device

model includes lifetime traffic, you should use the vehicle power

cable packaged with your device. If your device model does not

include traffic, you must purchase a Garmin traffic receiver

accessory. Go to www.garmin.com/traffic for more information.

Your device can receive traffic signals from a station

broadcasting traffic data.

NOTE: In some areas, traffic information may be received from

FM radio stations using HD Radio™ technology.

1Connect the traffic-compatible power cable to an external

power source.

2Connect the traffic-compatible power cable to the device.

When you are within a traffic coverage area, your device

displays traffic information.

Viewing Upcoming Traffic

You can view traffic incidents coming up along your route or

along the road on which you are traveling.

1While navigating a route, select > Traffic.

The nearest upcoming traffic incident appears in a panel on

the right side of the map.

2Select the traffic incident to view additional details.

Viewing Traffic on the Map

The traffic map shows color-coded traffic flow and delays on

nearby roads.

1From the main menu, select Apps > Traffic.

2If necessary, select > Legend to view the legend for the

traffic map.

Searching for Traffic Incidents

1From the main menu, select Apps > Traffic.

2Select > Incidents.

3Select an item in the list.

4If there is more than one incident, use the arrows to view

additional incidents.

Traffic on Your Route

When a traffic delay occurs on your route, an alert appears on

the map, and the device calculates an alternate route to avoid

the delay. You can choose whether to use alternate routes

automatically, or upon request. See Traffic Settings for more

information (page 13). Your device may route you through a

traffic delay if a better alternative route does not exist. The delay

time is added into your estimated time of arrival automatically.

Taking an Alternate Route

If you do not have your device set to use alternate routes

automatically, you can manually start an alternate route to avoid

a traffic delay.

1While navigating a route, select > Traffic.

2Select Alternate Route.

NOTE: If a better alternative route does not exist, this option

is not available, and On Fastest Route appears instead.

3Select Go!.

About Traffic Cameras

Traffic cameras provide live images of traffic conditions on

major roadways and intersections. You can save cameras that

you want to view regularly.

Saving a Traffic Camera

Before you can use this feature, you must subscribe to the

photoLive service, and your device must be connected to a

supported phone running Smartphone Link (page 9).

This feature is not available in all areas.

1Select Apps > photoLive.

2Select Touch to Add.

3Select a road.

4Select an intersection.

5Select Touch to Add.

Viewing a Traffic Camera

Before you can view a traffic camera, you must save a traffic

camera (page 7).

1Select Apps > photoLive.

2Select a camera.

Traffic 7

About Traffic Subscriptions

You can purchase additional subscriptions or a renewal if your

subscription expires. Go to http://www.garmin.com/traffic.

Subscription Activation

You do not need to activate the subscription included with your

FM traffic receiver. The subscription activates automatically

after your device acquires satellite signals while receiving traffic

signals from the pay service provider.

Viewing Traffic Subscriptions

Select Settings > Traffic > Subscriptions.

Adding a Subscription

You can purchase traffic subscriptions for other regions or

countries.

1From the main menu, select Traffic.

2Select Subscriptions > .

3Write down the FM traffic receiver unit ID.

4Go to www.garmin.com/fmtraffic to purchase a subscription

and get a 25-character code.

The traffic subscription code cannot be reused. You must

obtain a new code each time you renew your service. If you

own multiple FM traffic receivers, you must obtain a new

code for each receiver.

5Select Next on the device.

6Enter the code.

7Select Done.

trafficTrends™

When the trafficTrends feature is enabled, your device uses

historic traffic data to calculate more-efficient routes.

NOTE: Different routes may be calculated based on traffic

trends for the day of the week or the time of day.

Disabling trafficTrends

To prevent your device from recording or sharing traffic data,

you must disable trafficTrends.

Select Settings > Traffic > trafficTrends.

Enabling Traffic

You can enable or disable traffic data. When traffic data is

disabled, the device does not receive traffic data, but it still

avoids potentially congested areas in routes using the

trafficTrends feature, if enabled (page 8).

1Select Settings > Traffic.

2Select the Traffic check box.

Voice Command

NOTE: Voice command is not available for all languages and

regions, and may not be available on all models.

NOTE: Voice Activated Navigation may not achieve desired

performance when in a noisy environment.

Voice command allows you to use your device by saying words

and commands. The voice command menu provides voice

prompts and a list of available commands.

Setting the Wakeup Phrase

The wakeup phrase is a word or phrase you can say to activate

voice command. The default wakeup phrase is Voice

Command.

TIP: You can reduce the chance of accidental voice command

activation by using a strong wakeup phrase.

1Select Apps > Voice Command > Customize Phrase.

2Enter a new wakeup phrase.

The device indicates the strength of the wakeup phrase as

you enter the phrase.

3Select Done.

Activating Voice Command

Say your wakeup phrase.

The voice command menu appears.

Voice Command Tips

• Speak in a normal voice directed at the device.

• Reduce background noise, such as voices, or the radio, to

increase the accuracy of the voice recognition.

• Speak commands as they appear on the screen.

• Respond to voice prompts from the device as needed.

• Increase the length of your wakeup phrase to reduce the

chance of accidental voice command activation.

• Listen for two tones to confirm when the device enters and

exits voice command.

Starting a Route Using Voice Command

You can say the names of popular, well-known locations.

1Say your wakeup phrase (page 8).

2Say Find Place.

3Listen for the voice prompt, and speak the name of the

location.

4Say the line number.

5Say Navigate.

Muting Instructions

You can disable the voice prompts for voice command without

muting the device.

1Select Apps > Voice Command > .

2Select Mute Instructions > Enabled.

Disabling Voice Command

You can disable voice command, which prevents you from

accidentally activating voice command while speaking.

1Select Apps > Voice Command > .

2Select Voice Command > Disabled.

Hands-Free Phone Calls

About Hands-Free Calling

NOTE: Bluetooth wireless technology is not available on all

models, or for all languages and regions.

Hands-free calling is available on some models. Using

Bluetooth wireless technology, your device can connect to your

mobile phone to become a hands-free device. To determine

whether your mobile phone with Bluetooth technology is

compatible with your device, go to www.garmin.com/bluetooth.

Your phone may not support all of the hands-free phone

features your device provides.

Enabling Bluetooth Wireless Technology

1Select Settings > Bluetooth.

2Select Bluetooth.

Pairing Your Phone

Before you can use hands-free calling, you must pair your

device with a compatible mobile phone.

8 Voice Command

1Place your phone and your Bluetooth device within 33 ft. (10

m) of each other.

2On your device, enable Bluetooth wireless technology.

3Select an option:

• Select Settings > Bluetooth > Add Phone.

• If you have already paired a different phone, select

Settings > Bluetooth > Phone > .

4On your phone, enable Bluetooth wireless technology.

5On your device, select OK.

A list of nearby Bluetooth devices appears.

6Select your phone from the list, and select OK.

7If necessary, on your phone, confirm that the device is

allowed to connect.

8If necessary, enter the device Bluetooth PIN into your phone.

Tips After Pairing the Devices

• After the initial pairing, the two devices can connect

automatically each time you turn them on.

• When your phone is connected to your device, you are ready

to receive voice calls.

• When you turn on the device, it tries to connect to the last

phone to which it was connected.

• You might need to set your phone to connect to the device

automatically when the device is turned on.

Disconnecting Your Phone

1Select Settings > Bluetooth.

2Select Phone > None > Save.

Your phone is disconnected from your device but remains

paired with your device.

Deleting a Paired Phone

You can delete a paired phone to prevent it from automatically

connecting to your device in the future.

1Select Settings > Bluetooth > Phone.

2Select .

3Select the phone, and select Delete.

Placing a Call

Dialing a Number

1Select Apps > Phone > Dial.

2Enter the number.

3Select Dial.

Calling a Contact in Your Phone Book

Your phone book is loaded from your phone to the device each

time your phone and the device connect. It may take a few

minutes for the phone book to be available. Some phones do

not support this feature.

1Select Apps > Phone > Phone Book.

2Select a contact.

3Select Call.

Calling a Location

1Select Apps > Phone > Browse Categories.

2Select a point of interest.

3Select Call.

Receiving a Call

When you receive a call, select Answer or Ignore.

Using the Call History

Your call history is loaded from your phone to the device each

time your phone and the device connect. It may take a few

minutes for the call history to be available. Some phones do not

support this feature.

1Select Apps > Phone > Call History.

2Select a category.

A list of calls appears, with the most recent calls at the top.

3Select a call.

Using In-Call Options

1From the map, while on a call, select .

2Select an option.

• To transfer audio to your phone, select Handset.

TIP: You can use this feature if you want to turn off your

device and remain on the call, or if you need privacy.

TIP: You can use this feature to use automated systems,

such as voice mail.

• To mute the microphone, select Mute.

• To hang up, select End Call.

Saving a Home Phone Number

TIP: After you save a home number, you can edit the home

number by editing “Home” in your list of saved locations

(page 3).

1Select Apps > Phone > > Set Home Number.

2Enter your phone number.

3Select Done.

Calling Home

Before you can call home, you must enter a phone number for

your home location.

Select Saved > Home > > Call.

Using the Apps

Using Help

Select Apps > Help to view information about using the

device.

Searching Help Topics

Select Apps > Help > .

About Smartphone Link

Smartphone Link is a phone application that allows your device

to download live data using your phone data connection. Your

device transfers data from Smartphone Link using Bluetooth

wireless technology.

Connecting to Smartphone Link provides access to Garmin Live

Services. Garmin Live Services provides free and subscription-

based plans to view live data on your device, such as traffic

data, weather, and fuel prices.

Saved locations and recently found locations are synchronized

with your phone each time your device connects to Smartphone

Link.

Downloading Smartphone Link

Smartphone Link is available for some smartphones. Go to

www.garmin.com/smartphonelink or see the application store

for your phone for compatibility and availability information.

Download Smartphone Link from the application store on

your supported phone.

Using the Apps 9

See your phone owner's manual for information on

downloading and installing applications.

Connecting to Smartphone Link

Before you can connect to Smartphone Link, you must

download and install the Smartphone Link application on your

phone.

1Start Smartphone Link on your phone.

2From your device, select Settings > Bluetooth, and select

the Bluetooth check box.

3From your phone, select Bluetooth Settings.

4From your phone, enable Bluetooth wireless technology, and

scan for nearby Bluetooth devices.

See your phone owner's manual for more information.

5From your phone, select your device from the list of nearby

devices.

6Follow the on-screen instructions on your phone and on your

device to confirm the pairing request.

appears in the status bar on your device when

Smartphone Link is connected.

Sending a Location from Your Phone to Your Device

Smartphone Link is registered as a navigation application on

your phone.

1From your phone, select the button to start navigating to a

location (see the owner's manual for your phone).

2From the application menu, select Smartphone Link.

The next time you connect your device to your phone, the

location is transferred to the recently found items on your

device.

Disabling Calls While Connected to Smartphone Link

While the device is connected to the phone and receiving

Garmin Live Services, you can disable hands-free calling.

1Select Apps > Smartphone Link.

2Select your phone.

3Clear the Hands-Free Calling check box.

Garmin Live Services

Before you can use Garmin Live Services, your device must be

connected to a supported phone running Smartphone Link

(page 10).

Connecting to Smartphone Link provides access to Garmin Live

Services. Garmin Live Services provide free and subscription-

based plans to view live data on your device, such as traffic

data, weather and fuel prices.

Some services, like weather, are available as separate apps on

your device. Other services, like Live Traffic, enhance the

existing navigation features on your device. Features that

require access to Garmin Live Services display the Smartphone

Link symbol and appear only when the device is connected to

Smartphone Link.

Subscribing to Garmin Live Services

Before you can subscribe to Garmin Live Services, you must

install the Smartphone Link app on your phone.

1Start the Smartphone Link app on your phone (page 10).

2Select Garmin Live Services.

A list of services and subscription prices appears.

3Select a service.

4Select the price.

5Select Subscribe.

6Follow the on-screen instructions.

About ecoRoute

In some areas, before you can use ecoRoute™ features, you

must purchase an unlock code or an ecoRoute HD accessory.

Go to www.garmin.com/ecoroute for more information.

The ecoRoute feature calculates the fuel economy and the fuel

price of navigating to a destination, and offers tools for

improving fuel efficiency.

The data provided by the ecoRoute feature is an estimate only.

The data is not actually read from the vehicle, unless you are

using the ecoRoute HD accessory.

To receive more-accurate fuel reports for your specific vehicle

and driving habits, calibrate the fuel economy (page 10).

ecoRoute HD Accessory

When connected to the ecoRoute HD accessory, your device

can receive real-time vehicle information, such as error

messages, RPM, and battery voltage. Your device includes data

read from the vehicle by the ecoRoute HD accessory when

calculating ecoRoute data.

Go to www.garmin.com/ecoRoute.

Setting Up the Vehicle

The first time you use the ecoRoute features, you must enter

vehicle information.

1Select Apps > ecoRoute.

2Follow the on-screen instructions.

Changing the Fuel Price

1Select Apps > ecoRoute > At the Pump.

2Enter the current price of fuel, and select Next.

3Select Yes.

Calibrating the Fuel Economy

You can calibrate the fuel economy to receive more-accurate

fuel reports for your specific vehicle and driving habits. You

should calibrate when you fill up your fuel tank.

1Select Apps > ecoRoute > At the Pump.

2Enter the current fuel price.

3Enter the amount of fuel the vehicle has used since the last

time the fuel tank was filled.

4Enter the distance you have traveled since the last time the

fuel tank was filled.

5Select Next.

The device calculates the average vehicle fuel economy.

6Select Save.

About ecoChallenge

ecoChallenge helps you maximize the vehicle fuel economy by

scoring your driving habits. The higher your ecoChallenge

scores, the more fuel you have saved. The ecoChallenge

collects data and calculates a score whenever your device is

moving and in Automobile transportation mode.

Viewing ecoChallenge Scores

Select Apps > ecoRoute > ecoChallenge.

About the ecoChallenge Score

Acceleration: Displays your score for smooth and gradual

acceleration. You lose points for rapid acceleration.

Braking: Displays your score for smooth and gradual braking.

You lose points for hard braking.

Overall: Displays an average of the speed, acceleration, and

braking score.

Speed: Displays your score for driving your vehicle at the

optimal speed for conserving fuel.

Resetting the ecoChallenge Scores

1Select Apps > ecoRoute > ecoChallenge.

10 Using the Apps

2Select > Reset.

Viewing Fuel Economy Information

1Select Apps > ecoRoute > Fuel Economy.

2Select a section of the graph to zoom in.

Mileage Reports

Mileage reports provide the distance, the time, the average fuel

economy, and the fuel cost of navigating to a destination.

A mileage report is created for every route that you drive. If you

stop a route on your device, a mileage report is created for the

distance you traveled.

Viewing a Mileage Report

You can view saved mileage reports on the device.

TIP: You can connect the device to your computer and access

mileage reports in the Reports folder on the device.

1Select Apps > ecoRoute > Mileage Report.

2Select a report.

Resetting ecoRoute Information

1Select Apps > ecoRoute > Vehicle Profile.

2Select > Reset.

Viewing myGarmin Messages

Before you can use this feature, your device must be connected

to a supported phone running Smartphone Link (page 10). This

feature is not available in all areas.

You can view messages from myGarmin, such as notifications

for software and map updates.

1Select Apps > myGarmin.

If you have unread messages, the number of unread

messages appears on the myGarmin icon.

2Select a message subject.

The full message appears.

Viewing the Weather Forecast

Before you can use this feature, your device must be connected

to a supported phone running Smartphone Link (page 10). This

feature is not available in all areas.

1Select Apps > Weather.

2Select a day.

The detailed forecast for that day appears.

Viewing Weather Near a Different City

1Select Apps > Weather > Current Location.

2Select an option:

• To view weather for a favorite city, select a city in the list.

• To add a favorite city, select Add City, and enter a city

name.

Viewing the Weather Radar

You can view an animated, color-coded radar map of current

weather conditions, as well as a weather icon on the map. The

weather icon changes to show weather in the vicinity, such as

rain, snow, and thunderstorms.

1Select Apps > Weather.

2If necessary, select a city.

3Select > Weather Radar.

Viewing Weather Alerts

While you are traveling with your device, weather alerts may

appear on the map. You can also view a map of weather alerts

near your current location or near a selected city.

1Select Apps > Weather.

2If necessary, select a city.

3Select > Weather Alerts.

Checking Road Conditions

1Select Apps > Weather.

2If necessary, select a city.

3Select > Road Conditions.

Planning a Trip

You can use the trip planner to create and save a trip with

multiple destinations.

1Select Apps > Trip Planner.

2Select New Trip.

3Select Select Start Location.

4Search for a location (page 2).

5Select Select.

6To add additional locations, select .

7Select Next.

8Enter a name, and select Done.

Scheduling a Trip

You can use the trip planner to create and save a trip with

multiple destinations.

1Select Apps > Trip Planner.

2Select a trip.

3Select a location.

4Select an option:

• Select Departure Time.

• Select Arrival Time.

5Select a date and time, and select Save.

6Select Duration.

7Select the amount of time you will spend at the location, and

select Save.

8If necessary, repeat steps 3–7 for each location.

Navigating to a Saved Trip

1Select Apps > Trip Planner.

2Select a saved trip.

3Select Go!.

4If prompted, select a route (page 4).

Editing a Saved Trip

1Select Apps > Trip Planner.

2Select a saved trip.

3Select .

4Select an option:

• Select Rename Trip.

• Select Edit Destinations to add and delete a location, or

to change the order of locations.

• Select Delete Trip.

• Select Optimize Order to arrange the stops on your trip

in the most-efficient order.

Viewing Previous Routes and Destinations

Before you can use this feature, you must enable the travel

history feature (page 13).

You can view your previous routes and places you have

stopped on the map.

Select Apps > Where I've Been.

Using the Apps 11

Data Management

You can store files on your device. The device has a memory

card slot for additional data storage.

NOTE: The device is not compatible with Windows® 95, 98,

Me, Windows NT®, and Mac® OS 10.3 and earlier.

File Types

The device supports these file types.

• Maps and GPX waypoint files from myGarmin™ mapping

software, including MapSource®, BaseCamp™, and

HomePort™ (page 4).

• GPI custom POI files from Garmin POI Loader (page 4).

About Memory Cards

You can purchase memory cards from an electronics supplier,

or purchase pre-loaded Garmin mapping software

(www.garmin.com/trip_planning). In addition to map and data

storage, the memory card can be used to store files such as

maps, images, geocaches, routes, waypoints, and custom

POIs.

Installing a Memory Card

The device supports microSD™ and microSDHC memory cards.

1Insert a memory card into the slot on the device.

2Press it in until it clicks.

Connecting the Device to Your Computer

You can connect the device to your computer using the USB

cable included with your device.

1Plug the small end of the USB cable into the port on the

device.

2Plug the larger end of the USB cable into a port on your

computer.

A picture of your device connected to a computer appears on

the device screen.

Depending on your computer operating system, the device

appears as either a portable device, a removable drive, or a

removable volume.

Transferring Data From Your Computer

1Connect the device to your computer (page 12).

Depending on your computer operating system, the device

appears as either a portable device, a removable drive, or a

removable volume.

2On your computer, open the file browser.

3Select a file.

4Select Edit > Copy.

5Browse to a folder on the device.

NOTE: For a removable drive or volume, you should not

place files in the Garmin folder.

6Select Edit > Paste.

Disconnecting the USB Cable

If your device is connected to your computer as a removable

drive or volume, you must safely disconnect your device from

your computer to avoid data loss. If your device is connected to

your Windows computer as a portable device, it is not

necessary to safely disconnect.

1Complete an action:

• For Windows computers, select the Safely Remove

Hardware icon in the system tray, and select your device.

• For Mac computers, drag the volume icon to the trash.

2Disconnect the cable from your computer.

Customizing the Device

Map and Vehicle Settings

To open the Map and Vehicle settings, from the main menu,

select Settings > Map & Vehicle.

Vehicle: Changes the icon to represent your position on the

map. Go to www.garmingarage.com for more icons.

Driving Map View: Sets the perspective on the map.

Map Detail: Sets the level of detail on the map. More detail may

cause the map to draw slower.

Map Theme: Changes the color of the map data.

Map Tools: Selects the shortcuts that appear in the map tools

menu.

Map Layers: Sets the data that appears on the map page

(page 6).

myMaps: Sets which installed maps the device uses.

Enabling Maps

You can enable map products installed on your device.

TIP: To purchase additional map products, go to

www.garmin.com/us/maps.

1Select Settings > Map & Vehicle > myMaps.

2Select a map.

Navigation Settings

To open the Navigation settings page, from the main menu,

select Settings > Navigation.

Calculation Mode: Sets route preference.

Avoidances: Sets road features to avoid on a route.

Custom Avoidances: Allows you to avoid specific roads or

areas.

Advanced Detours: Sets the length of the detour.

Safe Mode: Disables all functions that require significant

operator attention and could become a distraction while

driving.

GPS Simulator: Stops the device from receiving a GPS signal,

and saves battery power.

Route Preferences

To open the Calculation Mode settings page, from the main

menu, select Settings > Navigation > Calculation Mode.

The route calculation is based on road speeds and vehicle

acceleration data for a given route.

Faster Time: Calculates routes that are faster to drive but can

be longer in distance.

Shorter Distance: Calculates routes that are shorter in distance

but can take more time to drive.

Less Fuel: Calculates routes that could use less fuel than other

routes.

Off Road: Calculates a direct line from your location to your

destination.

Display Settings

To open the Display settings page, from the main menu, select

Settings > Display.

Color Mode: Changes the brightness of the screen. Decreasing

the brightness can save battery power.

Display Timeout: Sets the amount of idle time before your

device enters sleep mode.

Brightness: Adjusts the display brightness.

Screenshot: Allows you to take a picture of the device screen.

Screenshots are saved in the Screenshot folder of the

device storage.

12 Data Management

Bluetooth Settings

To open the Bluetooth settings, from the main menu, select

Settings > Bluetooth.

Bluetooth: Enables Bluetooth wireless technology.

Add Phone: Manages connection between your device and

wireless headsets with Bluetooth wireless technology.

Friendly Name: Allows you to enter a friendly name that

identifies your devices with Bluetooth wireless technology.

Disabling Bluetooth

1Select Settings > Bluetooth.

2Select Bluetooth.

Traffic Settings

To open the traffic settings page, from the main menu, select

Settings > Traffic.

Traffic: Enables traffic.

Current Provider: Sets the traffic provider to use for traffic

data. Auto selects the best available traffic data

automatically.

Subscriptions: Lists current traffic subscriptions.

Optimize Route: Selects whether to use optimized alternate

routes automatically or upon request (page 7).

Traffic Alerts: Selects the traffic delay severity for which the

device displays a traffic alert.

trafficTrends: Enables the trafficTrends feature (page 8).

Units and Time Settings

To open the Units and Time settings page, from the main menu,

select Settings > Units & Time.

Current Time: Sets the device time.

Time Format: Allows you to select a 12-hour, 24-hour, or UTC

display time.

Units: Sets the unit of measure used for distances.

Position Format: Sets the coordinate format and datum used

for geographical coordinates.

Language and Keyboard Settings

To open the Language and Keyboard settings, from the main

menu, select Settings > Language & Keyboard.

Voice Language: Sets the language for voice prompts.

Text Language: Sets all on-screen text to the selected

language.

NOTE: Changing the text language does not change the

language of user-entered data or map data, such as street

names.

Keyboard Language: Sets the language for your keyboard.

Device and Privacy Settings

To open the Device settings page, from the main menu, select

Settings > Device.

About: Displays the software version number, the unit ID

number, and information on several other software features.

EULAs: Displays the end-user license agreements that apply to

your choice.

NOTE: You need this information when you update the

system software or purchase additional map data.

Travel History: Allows the device to record information for the

myTrends, Where I’ve Been, and Trip Log features.

Clear Travel History: Clears your travel history for the

myTrends, Where I’ve Been, and Trip Log features.

Proximity Alerts Settings

Select Settings > Proximity Alerts.

Audio: Sets the style of alert that plays when you approach

proximity points.

Alerts: Sets the type of proximity points for which alerts are

played.

Restoring Settings

You can restore a category of settings or all settings to the

factory default values.

1Select Settings.

2If necessary, select a settings category.

3Select > Restore.

Appendix

Power Cables

Your device can be powered various ways.

• Vehicle power cable

• USB cable

• AC adapter (optional accessory)

Charging the Device

You can charge the battery in the device using any of these

methods.

• Connect the device to the vehicle power cable.

• Connect the device to a computer using the included USB

cable.

• Connect the device to an optional power adapter accessory,

such as a wall power adapter.

Changing the Fuse in the Vehicle Power Cable

NOTICE

When replacing the fuse, do not lose any of the small pieces

and make sure they are put back in the proper position. The

vehicle power cable does not work unless it is assembled

correctly.

If your device does not charge in your vehicle, you may need to

replace the fuse located at the tip of the vehicle adapter.

1Unscrew the end piece À.

TIP: You may need to use a coin to remove the end piece.

2Remove the end piece, the silver tip Á, and the fuse Â.

3Install a 2 A fast-blow fuse.

4Place the silver tip in the end piece.

5Screw the end piece back into the vehicle power cable Ã.

About Device Care

NOTICE

Avoid dropping your device.

NOTICE

Do not store the device where prolonged exposure to extreme

temperatures can occur, because it can cause permanent

damage.

Appendix 13

NOTICE

Never use a hard or sharp object to operate the touchscreen, or

damage may result.

Cleaning the Outer Casing

NOTICE

Avoid chemical cleaners and solvents that can damage plastic

components.

1Clean the outer casing of the device (not the touchscreen)

using a cloth dampened with a mild detergent solution.

2Wipe the device dry.

Cleaning the Touchscreen

1Use a soft, clean, lint-free cloth.

2If necessary, apply liquid to the cloth.

You can use water, isopropyl alcohol, or eyeglass lens

cleaner.

3Gently wipe the screen with the cloth.

Avoiding Theft

• Remove the device and mount from sight when not in use.

• Remove the residue left on the windshield by the suction

cup.

• Do not keep your unit in the glove compartment.

• Register your device at http://my.garmin.com.

Mounting on Your Dashboard

NOTICE

The permanent mounting adhesive is extremely difficult to

remove after it is installed.

Use the mounting disk to mount your device to the dashboard

and comply with certain state regulations. See www.garmin.com

for more information.

1Clean and dry the dashboard where you are placing the disk.

2Remove the backing from the adhesive on the bottom of the

disk.

3Place the disk on the dashboard.

4Remove the clear plastic cover from the top of the disk.

5Place the suction cup mount on top of the disk.

6Flip the lever down (toward the disk).

Removing the Device, Mount, and Suction

Cup

Removing the Device from the Mount

1Press the release tab or button on the mount.

2Tilt the device forward.

Removing the Mount from the Suction Cup

1Turn the device mount to the right or left.

2Apply pressure until the socket on the mount releases the

ball on the suction cup.

Removing the Suction Cup from the Windshield

1Flip the lever on the suction cup toward you.

2Pull the tab on the suction cup toward you.

Purchasing Additional Maps

1Go to your device product page on the Garmin web site

(http://www.garmin.com).

2Click the Maps tab.

3Follow the on-screen instructions.

Purchasing Accessories

Go to http://buy.garmin.com.

Troubleshooting

The suction cup will not stay on my

windshield

1Clean the suction cup and windshield with rubbing alcohol.

2Dry with a clean, dry cloth.

3Mount the suction cup (page 1).

My device is not acquiring satellite signals

• Verify the GPS simulator is turned off (page 12).

• Take your device out of parking garages and away from tall

buildings and trees.

• Remain stationary for several minutes.

The device does not charge in my vehicle

• Check the fuse in the vehicle power cable (page 13).

• Verify the vehicle is turned on and is supplying power to the

power outlet.

• Verify the interior temperature of the vehicle is between 32°

and 113°F (between 0° and 45°C).

• Verify that the fuse is not broken in the vehicle power outlet.

My battery does not stay charged for very

long

• Decrease the screen brightness (page 12).

• Shorten the display timeout (page 12).

• Decrease the volume (page 1).

• Disable Bluetooth wireless technology (page 13).

• Put the device in sleep mode when not in use (page 1).

• Keep your device away from extreme temperatures.

• Do not leave your device in direct sunlight.

The battery gauge does not seem accurate

1Allow the device to fully discharge.

2Fully charge the device without interrupting the charge cycle.

My device does not appear as a removable

drive on my computer

On most Windows computers, the device connects using Media

Transfer Protocol (MTP). In MTP mode, the device appears as

a portable device and not as a removable drive. MTP mode is

supported by Windows 7, Windows Vista®, and Windows XP

Service Pack 3 with Windows Media Player 10.

My device does not appear as a portable

device on my computer

On Mac computers and some Windows computers, the device

connects using USB mass storage mode. In USB mass storage

mode, the device appears as a removable drive or volume, and

not as a portable device. Windows versions prior to Windows

XP Service Pack 3 use USB mass storage mode.

My device does not appear as either a

portable device or a removable drive or

volume on my computer

1Disconnect the USB cable from your computer.

2Turn off the device.

14 Troubleshooting

3Plug the USB cable into a USB port on your computer and

into your device.

TIP: Your device should be connected directly to a USB port

on your computer and not to a USB hub.

The device automatically turns on and goes into MTP mode or

USB mass storage mode. A picture of the device connected to a

computer appears on the device screen.

My phone will not connect to the device

• Select Settings > Bluetooth.

The Bluetooth field must be set to Enabled.

• Enable Bluetooth wireless technology on your phone and

bring your phone within 33 feet (10 m) of the device.

• Go to www.garmin.com/bluetooth for more help.

Troubleshooting 15

Index

Symbols

2-D map view 6

3-D map view 6

A

accessories 14

active lane guidance 5

adding stops 5

addresses, finding 3

alerts

audio 13

proximity points 13

safety cameras 13

answering calls 9

audio, proximity points 13

automatic volume 1

enabling 2

avoidances

area 6

customizing 6

deleting 6

disabling 6

road 6

road features 6

B

battery

charging 1, 2, 13, 14

maximizing 14

problems 14

Bluetooth technology 8, 15

disabling 13

enabling 8

Bluetoothtechnology, settings 13

brightness 1

C

cables, power 13

calibrating fuel economy 10

calls 8

answering 9

call waiting 9

contacts 9

dialing 9

disabling 10

history 9

home 9

placing 9

cameras, safety 7

changing search area 2

charging the device 1, 2, 13, 14

cleaning the device 14

cleaning the touchscreen 14

computer, connecting 12, 14

coordinates 3

current location 6

custom POIs 4

customizing, avoidances 6

customizing the device 12

D

dashboard mount 14

deleting

paired headset 9

trips 11

destinations. See locations

detours 5

device care 13

dialing 9

directions 5

disconnecting phone 9

display settings 12

driving directions 5

E

ecoChallenge 10

ecoChallenge score 10

resetting 10

ecoRoute 10, 11

calibrating fuel economy 10

ecoChallenge score 10

HD accessory 10

mileage report 11

mileage reports 11

vehicle profile 10

ecoRoute HD, accessory 10

EULAs 13

extras

custom points of interest 4

safety cameras 7

F

files

supported types 12

transferring 12

finding locations. 2 See also locations

addresses 3

browsing the map 2

categories 2

cities 3

coordinates 3

intersections 3

using the map 2

finding services, up ahead 5

fuel, prices 10

fuel economy. 10, 11 See also ecoRoute

fuel price, changing 10

fuse, changing 13

G

Garmin Express 1

registering the device 1

updating software 1

Garmin Live Services 10

subscribing to 10

geocaching 3

going home 3

GPS 1, 2

H

hands-free phone calls 8

help. 9 See also product support

home

calling 9

editing location 3

going 3

phone number 9

setting locations 3

I

ID number 13

intersections, finding 3

J

junction view 5

K

keyboard 2

language 13

layout 13

L

language

keyboard 13

voice 13

latitude and longitude 3

lifetime maps 1

locations 2, 3, 11

calling 9

current 3, 6

recently found 3

saving 3

searching for 3

setting home 3

simulated 4

M

map, data field 6

map layers, customizing 6

map perspective 6

map tools 6

map view

2-D 6

3-D 6

maps 5, 12

browsing 2

data field 5

detail level 12

layers 6

lifetime 1

nüMaps Guarantee 1

nüMaps Lifetime 1

purchasing 14

theme 12

updating 1

viewing routes 5

memory card 12

microSD card, installing 12

mileage reports 11

mount, removing 14

mounting the device

automobile 1

dashboard 14

removing from mount 14

suction cup 1, 14

muting, audio 8

myGarmin, messages 11

myTrends, routes 6

N

navigation 4

off-road 4

previewing routes 4

settings 12

next turn 5

nüMaps Guarantee 1

nüMaps Lifetime 1

O

off-road navigation 4

on-screen buttons 2

P

pairing 9

deleting paired headset 9

disconnecting 9

phone 8, 15

parking 3

last spot 3

phone

disconnecting 9

pairing 8, 15

phone book 9

phone calls 8

answering 9

call waiting 9

dialing 9

muting 9

voice dial 9

POI. 4 See also point of interest (POI)

POI Loader 4

points of interest (POI Loader) 4

points of interest (POI)

custom 4

extras 4

POI Loader 4

power cables 13

changing the fuse 13

vehicle 1

power key 1

product registration 1

product support 9

proximity points alerts, settings 13

Q

Quick Search 2

R

recently found locations 3

registering the device 1

16 Index

removing mount 14

renaming trips 11

reports, mileage 11

resetting

device 1

trip data 6

restoring settings 13

road conditions, weather 11

routes

calculating 4

myTrends 6

preferences 12

previewing 4

starting 4

stopping 5

suggested 6

viewing on the map 5

S

safety cameras, database 7

satellite signals

acquiring 1

viewing 2

saved locations 4, 11

categories 3

deleting 4

editing 3

saving, current location 3

screen, brightness 1

screenshots 12

search bar 2

settings 12, 13

shortcuts

adding 4

deleting 4

simulated locations 4

sleep mode 1

Smartphone Link 9

connecting 10

disabling calls 10

Garmin Live Services 9

software

updating 1

version 13

speech recognition 8

stops, adding 5

subscriptions

Garmin Live Services 10

nüMaps Lifetime 1

traffic 1

suction cup 14

T

theft, avoiding 14

time settings 2, 13

traffic 7, 8, 13

activating a subscription 8

adding subscriptions 8

alternate route 7

cameras 7

incidents 7

lifetime subscriptions 1

map 7

receiver 7

searching for delays 7

trafficTrends 8

traffic cameras 7

saving 7

viewing 7

trafficTrends 8

disabling 8

travel history 13

trip computer 5

resetting information 6

trip data 5

resetting 6

trip information, viewing 5

trip log, viewing 6

trip planner 11

editing a trip 11

troubleshooting 14, 15

turn list 5

U

unit ID 13

up ahead

customizing 5

finding services 5

up ahead services 5

USB, disconnecting 12

V

vehicle power cable 1

vehicle profile 10

voice command 8

activating 8

navigating with 8

tips for using 8

wakeup phrase 8

volume, adjusting 1

W

weather 11

radar 11

road conditions 11

Where Am I? 3, 6

Index 17

www.garmin.com/support

913-397-8200

1-800-800-1020

0808 238 0000

+44 870 850 1242 1-866-429-9296 +43 (0) 820 220 230

+32 2 672 52 54 +45 4810 5050 +358 9 6937 9758 + 331 55 69 33 99

+49 (0)1805-427646-880 + 39 02 36 699699 0800 - 023 3937

035 - 539 3727 + 47 815 69 555

00800 4412 454

+44 2380 662 915 + 35 1214 447 460 + 34 902 007 097 + 46 7744 52020

Garmin International, Inc.

1200 East 151st Street

Olathe, Kansas 66062, USA

Garmin (Europe) Ltd.

Liberty House, Hounsdown Business Park

Southampton, Hampshire, SO40 9LR UK

Garmin Corporation

No. 68, Zhangshu 2nd Road, Xizhi Dist.

New Taipei City, 221, Taiwan (R.O.C.)

© 2013 Garmin Ltd. or its subsidiaries