Gasguard Technologies RCV1000 Radio Control Valve User Manual RCV1000
Gasguard Technologies Inc. Radio Control Valve RCV1000
users manual
RCV-1000 Radio Controlled Valve
User Manual
Operation
The RCV 1000 accepts 4 control signals from a control unit.
Signal 1: Open – Opens the valve.
Signal 2: Close 90% – Close the valve to 90%, limiting the amount of water that will flow through
the valve.
Signal 3: Close 100% – Close the valve to 100%, completely shutting off the flow of water through
the valve.
Signal 4: Report Status – Instructs the valve to reply to the controller with its position and battery
status.
After each action is performed, the RCV 1000 will send a confirmation signal back to the
controller.
Specifications
FCC ID : OZE-RCV1000
Signal Frequency : 915 MHz
Encoding : Frequency Modulation
Power Input : DC 3.6 Volts
(AA Lithium Thionyl Chloride battery)
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference including interference that may cause undesired
operation. Any changes or modifications made to this device
without express written approval from Qtronics Manufacturing, Inc.
could void the end user's authority to operate this device under
FCC regulations.