Ge Appliances 15150 15154 7Day Digital Timer Owners Manual 15150_15154 English
Jasco-15150-Instruction-Manual-650193 jasco-15150-instruction-manual-650193
Jasco-15150-Users-Manual-433878 jasco-15150-users-manual-433878
Ge-15150-15154-Ge-7Day-Digital-Timer-Owners-Manual ge-15150-15154-ge-7day-digital-timer-owners-manual
Jasco-15154-Instruction-Manual-650194 jasco-15154-instruction-manual-650194
15154 to the manual 269e9593-da75-42da-8281-e334986fe621
2015-03-16
: Ge-Appliances Ge-15150-15154-Ge-7Day-Digital-Timer-Owners-Manual ge-15150-15154-ge-7day-digital-timer-owners-manual ge-appliances pdf
Open the PDF directly: View PDF 
.
Page Count: 1
| Download | |
| Open PDF In Browser | View PDF |
7-Day Digital Timer User Instructions WARNING - Risk of fire or electric shock • For indoor use only in dry locations. • Do not exceed capacity. • Do not use timer with devices that could have dangerous consequences due to inaccurate timing, such as sun lamps, heaters, etc. • Plug directly into receptacle. NOTICE • No user serviceable parts. Install setup: 1. Plug timer into wall outlet for a 5 minutes to charge internal battery. NOTE: You can unplug the timer to set after initial battery charge. 2. Before programming all settings should be reset. Use a toothpick or pencil to push the “R” button. 3. Select AM/PM format: 1. Press and hold the CLOCK button for 5 seconds until display shows 24H or 12H, then release. 2. Press the HOUR button to change display to "12H". 3. Press the CLOCK button to restore the normal clock display. The letters "AM" should show in upper left corner of the display. 4. Set time of day: 1. Press and hold the CLOCK button throughout time setting. 2. At the same time, press the HOUR button to advance to the correct hour. 3. Continuing to push down the clock button, press the MINUTE button to advance to the correct minute. 5. Set ON/OFF times 1. Press the PROGRAM button once to display the first ON setting" 1 ON -- --:-- --". 2. Press the MINUTE and HOUR buttons as necessary to set the ON time you want. 3. Press the WEEK button as necessary to choose the day or group of days you want for the time setting. 4. Press the PROGRAM button again to display the first OFF setting-"1 OFF--:--". 5. Repeat the procedure to create the OFF setting. 6. Repeat Steps 1 thru 5 for additional ON/OFF settings. 7. Press the CLOCK button to exit from PROGRAM mode. 6. Review ON/OFF settings: It is important to review all 20 settings, even if you only used a few, to make sure there are no extra, unintended settings. 1. Press the PROGRAM button (hold down to scroll) until the display cycles through all 20 ON/OFF pairs. 2. Stop on any setting you want to remove or change. To revise a setting: 1. Press the PROGRAM button (hold down to scroll) until the display shows the setting you want to revise. 2. Press the HOUR, MINUTE and WEEK buttons as necessary to revise the displayed ON or OFF time and day(s). To remove or restore a setting: 1. Press the PROGRAM button (hold down to scroll) until the display shows the setting you want to remove or restore. 2. Press the RST/RCL button. - If removing, the display will replace the setting with dashes. Pressing the RST/RCL button again will restore the previous setting. To Operate the timer: 1. After setting the timer, plug it in and connect the device to be controlled. 2. Press the ON/AUTO/OFF button as necessary to display: ON-The timer remains ON and ignores your settings. OFF-The timer remains OFF and ignores your settings. AUTO-The timer follows your settings. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encourage to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Things to know about ON/OFF times: • Repeatedly pressing the PROGRAM button cycles through the possible 20 ON/OFF pairs: 2 ON, 2 OFF, 3 ON, 3 OFF, etc . • The display panel automatically returns to time of day if you do not press any buttons for 15 seconds. • If you are interrupted before completing a setting, simply press the PROGRAM button until you reach the setting where you left off. This Jasco product comes with a 1 year limited warranty. Visit www.jascoproducts.com for details. 15150 15154
Source Exif Data:
File Type : AI File Type Extension : ai MIME Type : application/vnd.adobe.illustrator PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.2-c063 53.352624, 2008/07/30-18:05:41 Format : application/pdf Title : 15150_15154 English Creator Tool : Adobe Illustrator CS4 Create Date : 2011:09:20 17:21:16-05:00 Modify Date : 2011:09:20 17:21:16-05:00 Metadata Date : 2011:09:20 17:21:16-05:00 Thumbnail Width : 256 Thumbnail Height : 204 Thumbnail Format : JPEG Thumbnail Image : (Binary data 22711 bytes, use -b option to extract) Document ID : xmp.did:F97F1174072068118DBBCFAF45A019D7 Instance ID : uuid:a29c8214-a940-7a4d-8016-10c88ae77d89 Rendition Class : proof:pdf Original Document ID : uuid:9F9473C9E54FDE11B5AA9DB78A2054BE Derived From Instance ID : xmp.iid:F87F1174072068118DBBCFAF45A019D7 Derived From Document ID : xmp.did:F87F1174072068118DBBCFAF45A019D7 Derived From Original Document ID: uuid:9F9473C9E54FDE11B5AA9DB78A2054BE Derived From Rendition Class : proof:pdf History Action : saved, saved, saved History Instance ID : xmp.iid:02801174072068118DBBC77FDADF5DE9, xmp.iid:F87F1174072068118DBBCFAF45A019D7, xmp.iid:F97F1174072068118DBBCFAF45A019D7 History When : 2011:09:13 10:08:52-05:00, 2011:09:20 17:21:14-05:00, 2011:09:20 17:21:16-05:00 History Software Agent : Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4 History Changed : /, /, / N Pages : 1 Has Visible Transparency : False Has Visible Overprint : False Max Page Size W : 8.500000 Max Page Size H : 6.500000 Max Page Size Unit : Inches Font Name : GEInspira, GEInspira-Bold Font Family : GE Inspira, GE Inspira Font Face : Regular, Bold Font Type : Type 1, Type 1 Font Version : 002.000, 002.000 Font Composite : False, False Font File Name : GEIns; GE Inspira, GEInsBol; GE Inspira Plate Names : Cyan, Magenta, Yellow, Black Swatch Group Name : Default Swatch Group Swatch Group Type : 0 Swatch Colorant Swatch Name : black Swatch Colorant Type : PROCESS Swatch Colorant Tint : 100.000000 Swatch Colorant Mode : CMYK Swatch Colorant Cyan : 69.842102 Swatch Colorant Magenta : 67.354797 Swatch Colorant Yellow : 63.976501 Swatch Colorant Black : 73.806396 Producer : Adobe PDF library 9.00 Page Count : 1 Creator : Adobe Illustrator(R) 14.0 For : kiqbal, Bounding Box : 28 166 598 616 Container Version : 11 Creator Version : 14 Image Height : 450 Image Width : 570 Image Size : 570x450 Megapixels : 0.257EXIF Metadata provided by EXIF.tools