Ge Appliances 19232 Direct Wire Push Button Silver Owners Manual 19210CLAMDIE

Jasco-19232-Users-Manual-433823 jasco-19232-users-manual-433823

Jasco-19232-Instruction-Manual-650218 jasco-19232-instruction-manual-650218

Ge-19232-Ge-Direct-Wire-Push-Button-Silver-Owners-Manual ge-19232-ge-direct-wire-push-button-silver-owners-manual

19232 to the manual 2a0111cf-4ed4-4bb9-9f90-b784038d8976

2015-03-16

: Ge-Appliances Ge-19232-Ge-Direct-Wire-Push-Button-Silver-Owners-Manual ge-19232-ge-direct-wire-push-button-silver-owners-manual ge-appliances pdf

Open the PDF directly: View PDF PDF.
Page Count: 1

DownloadGe-Appliances Ge-19232-Ge-Direct-Wire-Push-Button-Silver-Owners-Manual 19210CLAMDIE
Open PDF In BrowserView PDF
Informacíon
en Español
Incluyé

Replaces existing
doorbell button

Direct Wire
Push Button

From
Wall
Instalación
Los botones de timbre generalmente están instalados
a la misma altura de la perrilla o picaporte, a unos 90
ó 110 cm sobre la parte inferior de la puerta. Ubique
los dos cables del timbre del circuito que ya está
instalado a lado de la puerta. Revise que el timbre
funcione, una ambos
cables para completar el
circuito. Si el timbre no
suena, revise el
transformador o el
timbre. Corte la
electricidad. Asegure
cada cable a cada uno
de los terminales de
tornillo en la parte
posterior del botón.
los
Instale el botón en el
terminales
lugar deseado con los
de tornillo
dos tornillos incluidos.
La instalación debe estar
de acuerdo con los
códigos eléctricos
locales.
Nota: No se recomienda usar este botón de timbre con
sistemas de más de 16 voltios.

Remplaza al timbre de la puerta actual

Botón de timbre cableado
19232

19232

Direct Wire Push Button
Replaces existing doorbell button

Note: This button is not recommended for use on
systems which exceed 16 volts.
Installation
Push buttons are typically mounted at the same
height above the door sill as the door knob or handle
between 36” and 44” above the sill. Locate the two
door chime wires emanating from the existing door
chime circuit. Test
the door chime by
touching the two
wires together,
completing the
circuit. If door
chime does not
sound, check
transformer or
chime. Turn off
screw
power. Attach one
terminals
wire to each of the
screw terminals on
the back of the
button. Mount
button in desired
location with two
screws provided.
From
Install according to
Wall
applicable local
electrical codes.

Direct Wire Push Button
Replaces existing doorbell button
Complete installation instructions inside.
Note: This button is not recommended for use on systems
which exceed 16 volts.
Not for use with GE wireless door chimes.

Botón de timbre cableado
Remplaza al timbre de la puerta actual
Las instrucciones Españolas Incluyeron.
Nota: No se recomienda usar este botón de timbre con
sistemas de más de 16 voltios.
No se debe usar con timbres para puertas
inalámbricos GE.

WARNING
Risk of electric shock
• Shut off power at fuse box
or circuit breaker before
installation
Risk of fire
• Do not exceed electrical
ratings

ADVERTENCIA
Riesgo de choque eléctrico
• Antes de instalar, corte la
electricidad desde la caja
de fusibles o con el
interruptor de luz
Riesgo de incendio
• No exceda el rendimiento
eléctrico permitido

is a trademark of
General Electric Company
and is used under license to
Jasco Products Company LLC,
10 E Memorial Rd.,
Oklahoma City, OK 73114
www.jascoproducts.com
19232-1 Jasco 2008 GTIN 00043180192325

Made in China
Hecho en China
Source Exif Data: 
File Type                       : AI
File Type Extension             : ai
MIME Type                       : application/vnd.adobe.illustrator
PDF Version                     : 1.5
Linearized                      : Yes
Page Count                      : 1
Container Version               : 9
Creator Version                 : 12
Creator                         : Adobe Illustrator(R) 12.0
For                             : Jasco Graphics User,
Create Date                     : 7/7/08 3:34 PM
Bounding Box                    : 770 228 1353 1107
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:7f18314c-f067-4662-b5fc-76e7872f468e
Creator Tool                    : Adobe Illustrator CS2
Modify Date                     : 2009:06:01 14:43:50-05:00
Metadata Date                   : 2009:06:01 14:43:50-05:00
Thumbnail Width                 : 172
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 16137 bytes, use -b option to extract)
Document ID                     : uuid:984E0BE64DC911DDAE6FF28145B86910
Instance ID                     : uuid:11732080-4c64-11dd-9de0-000a95cf5d7a
Derived From Instance ID        : uuid:2e82c5b6-4c61-11dd-9de0-000a95cf5d7a
Derived From Document ID        : uuid:C87EB5F64D9B11DDB989F9AC4FEC3D68
Format                          : application/pdf
Title                           : 19210CLAMDIE
Image Height                    : 879
Image Width                     : 583
Image Size                      : 583x879
Megapixels                      : 0.512
EXIF Metadata provided by EXIF.tools

Navigation menu