Ge Appliances Pvm2070Smss Users Manual

If not then Dispatcher?RequestType=PDF&Name=240271_pvm2070sm_c3 Manual: ://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=240271_pvm2070sm_c3

PVM2070SMSS to the manual 33174b44-fe02-4f3f-8130-d22bbfbb5e2d

2015-01-23

: Ge-Appliances Ge-Appliances-Pvm2070Smss-Users-Manual-255934 ge-appliances-pvm2070smss-users-manual-255934 ge-appliances pdf

Open the PDF directly: View PDF PDF.
Page Count: 3

DownloadGe-Appliances Ge-Appliances-Pvm2070Smss-Users-Manual-  Ge-appliances-pvm2070smss-users-manual
Open PDF In BrowserView PDF
PVM2070SM

Over-the-Range Microwave Oven

GE Profile™ Spacemaker® 2.0 Cu. Ft. Over-the-Range
Microwave
Dimensions
(in inches) Oven
Dimensions and Installation Information (in inches)
Note: Requires 120V grounded outlet. Electrical receptacle must be
located in cabinet above Spacemaker microwave oven. No additional
wiring, venting or cabinet rebuilding necessary in many cases. Complete
detailed, easy-to-follow installation instructions and convenient full-size
templates are packed with the Spacemaker microwave oven.

66" MIN.
Mounting
height
from
floor

Important Information: When installing the Spacemaker microwave
oven over a range, allow minimum of 2” from bottom of Spacemaker
microwave oven to top of range backguard to allow for removal
of light covers.
Installation Information: This information is not intended to be used for
installing unit described. Before installing, consult installation instructions
packed with product/kit for current dimensional data.

30"
MIN.
width
required

Exhaust outlet
connects to
3-1/4" X 10" duct

13"
MAX.
12"
MIN.

15-15/16

24-1/2

16-7/8
(rear)

105°
Door open
(without
obstruction)

16-29/32
29-7/8
Minimum distance from
door hinge side to adjacent
wall should equal 1/2-inch.

For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Listed by
Underwriters
Laboratories

Specification Created 7/07

240271

PVM2070SM
GE Profile™ Spacemaker® 2.0 Cu. Ft. Over-the-Range Microwave Oven
Optional Accessories (Available at additional cost)
Hood Exhaust Duct: Outside ventilation requires a HOOD EXHAUST DUCT. Read the
following carefully.
Exhaust Connection: The hood exhaust has been designed to mate with a standard
3-1/4" x 10" rectangular duct. If a round duct is required, a rectangular-to-round
transition adaptor must be used. Do not use less than a 6" diameter duct.
Rear Exhaust: If a rear or horizontal exhaust is to be used, care should be taken to
align exhaust with space between studs, or wall should be prepared at the time it
is constructed by leaving enough space between the wall studs to accommodate
exhaust.
Maximum Duct Length: For satisfactory air movement, the total duct length of 3-1/4"
x 10" rectangular or 6" diameter round duct should not exceed 140 equivalent feet.
ELBOWS, TRANSITIONS, WALL AND ROOF CAPS: etc., present additional resistance to
airflow and are equivalent to a section of straight duct which is longer than their
actual physical size. When calculating the total duct length, add the equivalent length
of all transitions and adaptors plus the lengths of all straight duct sections. The chart
below shows the approximate feet of equivalent length of some typical ducts.

Duct	

Filter Kits
JX81H–Recirculating
Charcoal Filter Kit

Filler Panel Kits
JX40CT-Bisque
JX41–Black
JX40WH–White

When replacing a 36" or
42" range hood, this kit fills
in the additional width to
provide a custom built-in
appearance.
For installation between ­
cabinets only; not for
end-of-cabinet installation.
Each kit ­contains two
3"-wide filler panels. Two kits are
needed for a 42" opening.

To be used when
the Spacemaker
microwave oven
cannot be vented
to the outside.

Decorative Panel Kits

Equivalent Feet
3/8
depth

A.	Rectangular-To-round		
Transition Adaptor	
5 ft.
B.	 Wall Cap	

40 ft.

C.	 90° Elbow	

10 ft.

D.	45° Elbow	

5 ft.

E.	 90° Elbow	

25 ft.

F.	 45° Elbow	

5 ft.

G.	Roof Cap	

24 ft.

30

19

JX22SS - Stainless Steel Decorative Panel
Kit When replacing a Hi/Low range with a
microwave/convection oven or Spacemaker
over a range model, this panel kit fills in the
area between the microwave and range left by
the H-Low model.

Listed by
Underwriters
Laboratories

Specification Created 7/07

240271

PVM2070SM
GE Profile™ Spacemaker® 2.0 Cu. Ft. Over-the-Range Microwave Oven
Features and Benefits
•	2.0 Cu. Ft. Capacity - 1100 Watts (IEC-705 test procedure)
• D
 ual-Distribution Cooking System - Circulates microwaves from the
top and side of the oven for even heating and defrosting of food
• E
 asyGuide™ Menu System - Automatically leads you through each
step of the cooking process
• S
 often Feature - Exceptional for heavy foods like butter and cream
cheese, as well as frozen ice cream
• 1
 -lb. Quick Defrost - Evenly defrosts a pound meat, poultry or fish in
a fraction of the usual time, without precooking or turning the food
• F ull-Width Active Hidden Vent - Out of sight when not in use, the
oven vent hides behind the sleek top panel for a sophisticated,
easy-to-clean look
• 1
 4-1/4" Recessed Turntable - Large enough to handle 5-qt. casserole dishes and can easily be removed for cleaning
• F our-Speed with Boost 315-CFM Venting - Allows you to adjust the
ventilation levels according to your needs

Light
Boost
Vent

PVM2070SM

• T wo Removable Oven Racks - Make room for up to six plates or
three 9" x 13" casserole dishes
•	 Model PVM2070SMSS – Stainless steel

Specification Created 7/07

240271



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
XMP Toolkit                     : 3.1.1-111
About                           : 66fba23d-3332-11da-b9fd-e4340749253c
Create Date                     : 2007:07:26 11:35:07-04:00
Metadata Date                   : 2007:07:26 11:35:10-04:00
Modify Date                     : 2007:07:26 11:35:10-04:00
Creator Tool                    : Adobe InDesign CS2 (4.0.2)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 8065 bytes, use -b option to extract)
Instance ID                     : uuid:cb3bdcc2-3b8d-11dc-970b-000a95d894fe
Document ID                     : adobe:docid:indd:a81e1b00-3c4c-11dc-96d6-ebe853ebfba9
Rendition Class                 : proof:pdf
Derived From Instance ID        : a81e1aff-3c4c-11dc-96d6-ebe853ebfba9
Derived From Document ID        : adobe:docid:indd:986ebb63-a691-11d9-b195-e7eff27a1510
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:99423835309511DC93A2A1E7A16F8569, uuid:F0575473725411DB8A5ADCC876FC3BCD, uuid:500FFE0CD2E911DB8869C649B30B1D97
Manifest Reference Document ID  : uuid:99423834309511DC93A2A1E7A16F8569, uuid:AA0565B3ED6411DAA570AA2EC24D3EB0, uuid:E71DAAF8B9D411DBA7C1F14992EB1A22
Format                          : application/pdf
Producer                        : Adobe PDF Library 7.0
Trapped                         : False
Page Count                      : 3
Creator                         : Adobe InDesign CS2 (4.0.2)
EXIF Metadata provided by EXIF.tools

Navigation menu