Ge Appliances Crxvision Brochure
Ge-Crxvision-Brochure-648801 ge-crxvision-brochure-648801
2015-08-07
: Ge-Appliances Ge-Crxvision-Brochure-648801 ge-crxvision-brochure-648801 ge-appliances pdf
Open the PDF directly: View PDF .
Page Count: 5
Download | |
Open PDF In Browser | View PDF |
GE Measurement & Control High Resolution Weld Inspection and All-Purpose Computed Radiography Scanner Inspection Technologies: CRxVision Packed with innovative features to increase throughput, extend plate life and provide excellent image quality, the CRxVision is designed specifically for the inspection of welds. The scanner is developed to cover the stringent ISO 17636-2 Class A and B requirements, as well as ASTM, ASME and EN weld standards. Because of its versatility, it can also be used for many other applications across the NDT industry. CRxVision: the versatile, new tabletop scanner from GE. 6 Flexible 1 accepting a wide range of sizes, shapes and classes of imaging plates Intuitive 2 no gain setting or photomultiplier adjustments required when exposing various thicknesses Fast multiple plate scanning option: side-by-side and back-to-back with a flat transport path High Resolution 4 Extended Plate Life 5 new laser optics for profound reading and higher data extraction no mechanical handling of the imaging plate during scanning and erasing ASTM DICONDE Compliant fully compatible with GE´s existing Rhythm Software Platform 7 Ambient Operation cover protects the imaging plate from light exposure 3 8 Direct Laser Contact the laser beam is in direct contact with the imaging plate (no glass to obscure data collection) Your Benefits: — Compliant to ISO 17636-2 Class A and B, ASME, ASTM and EN weld inspection standards. — The CRxVision has an extremely wide latitude eliminating the need for multiple gain settings when exposing over a wide range of thicknesses. This is the result of a 16 bit image processing at selectable 35 or 70 microns resolution. — Exposure times for welds are equal or better than existing film exposure times (to comply with Code Standards like EN and ASME) and can be reduced by up to ten times for non-code type applications like erosion/corrosion or valve placement. — Designed for extremely high throughput: 90 plates/hr at 70 microns or 28 plates/hr at 35 microns for a 10 x 40 cm (4.5 x 17”) plate. The scanner allows multiple imaging plates to be scanned simultaneously … side-by-side and back-to-back as well as various lengths to be scanned together. This is a result of the straight and flat, in-line scan and erase transport path. — Ability to scan any shape or size of imaging plate from from 20 to 1500 mm (0.75 to 60”) in length. Imaging plates can be exposed in any type of cassette, then simply removed and inserted directly into the scanner without the need of any type of adapter, template or leader. — A new innovative imaging plate design now provides the GE CRxVision imaging plates with more flexibility. This new design allows each imaging plate the ability to return to a flat state after being constantly bent around pipes for the inspection of welds. This feature also helps improve productivity by allowing the imaging plates to be easily extracted and reinserted into cassettes. — Plate transport through the scanners is achieved by a magnetic transportation system. This new combination of scanner and imaging plate design allows the imaging plate to be transported through the scanner without any mechanical handling of the phosphor ultimately extending the overall life of the plate. — The updated Rhythm RT software simplifies inspection workflow. It now has the ability to automatically crop the images by detecting the physical edges of each individual plate when they are processed. Consequently, each individual plate can be separately identified and saved or grouped together and saved as one file. — The new scanner enjoys all the functionality offered by GE´s Rhythm Software giving the inspector the ability to view, enhance, measure, annotate and comment on the images. The CRxVision system is completely DICONDE compliant and compatible with all existing modules in GE´s Rhythm Software platform. — The CRxVision can be used in ambient light conditions with suitable handling as the light cover protects the plates from light exposure during the scan cycle. The cover can be removed for work in darkrooms if required. — The scanner weighs less than 45 kg (99 lbs) and has a footprint of 560 x 560 mm (22 x 22 inches). It extends to 560 x 1280 mm (22 x 50 inches) when the feed and exit tables are attached. — The light guide can be easily cleaned with an internal brush which is operated by simply turning a set screw. The eraser section of the scanner is completely sealed from the optics section to prevent migration of any dust particles into the machine. Applications Even though the CRxVision was designed for the inspection of welds, it also has the ability to cover a wide range of industrial radiography applications, from Oil & Gas to Aerospace, and from Power Generation to General NDT. • Weld inspection • Erosion/Corrosion inspection (CUI, FAC, etc.) • Castings (In-process and final) • Valve positioning • Concrete and Structure inspection • Government (Arsenals, National Laboratories, Proving Grounds) • Military (in-service aircraft, ships, etc.) In all applications the CRxVision offers the following significant benefits of digital radiography: • No darkroom facilities/trucks needed • Eliminate processing chemicals and chemical disposal/silver recovery • Improved image interpretation and inspection quality level with Flash!FiltersTM • Consistent & operator–independent results with the Automated WT Measurement tool • High reduction in retakes due to the wide dynamic range of the imaging plates Rhythm RT for Workflow Optimization • No development time, as images are immediately available after scanning • High reduction in storage space when archiving digital images • Data management (trending) and data sharing advantages • Fully DICONDE compliant Both GE´s Rhythm RT and Rhythm RT Lite provide a powerful, ASTM DICONDE Compliant operational software platform, which simplifies the overall inspection workflow. After entering the component and technique data, select the required scan resolution and then the scanner will prompt you to insert the imaging plate. Once the imaging plate is scanned, the image will appear and any Region of Interest (ROI) may then be identified on the computer screen and enhancements, annotations and measurements applied. The image can then be saved for further review and/or storage. The files can be saved in TIFF, BMP, JPEG, and/or DICONDE formats. Rhythm RT workflow the required 1 Select resolution 2 5 Enter the component and technique information Select a specific ROI (if desired) 3 Insert the imaging plate(s) to start the cycle 4 Press scan 6 Send image to review Imaging Plates Four different types of imaging plates with a ferromagnetic back layer have been developed specifically for the CRxVision. This allows the imaging plates to be magnetically transported through the scanner with no phosphor touch points. In addition, this new design helps reduce backscatter which improves the overall quality of the image as well as allows the imaging plate the ability to return to a flat position after being constantly bent around curved objects. GE´s four imaging plate types are as follows: • IPC2: Standard Resolution & High Speed - for general purpose Technical Specifications of CRxVision Functional Data Electrical Data Principle Operating voltage Eraser High performance table-top flatbed scanner with contactless plate transport Inline Mains frequency Auto-ranging external power supply from 100 V to 240 V, DC Output 24V 50/60 Hz Resolution Standard resolution (SR) 70 µm Mains fuse protection Europe min. 10 A, max. 16 A USA & Japan min. 10 A, max. 15 A High resolution (HR) 35 µm Maximum basic Standard resolution (SR) 80 µm (6,25 LP / mm) Spatial resolution High resolution (HR) 40 µm (12,5 LP / mm) • IPS: High Resolution & Medium Speed - for inspection of welds Scan width 35 cm (14 inch) • IPS2: High Resolution & Medium Speed – for inspection of welds Excellent for very low contrast, homogeneity type applications and premium weld quality inspections. Throughput (10 x 40 cm 4.5 x 17”) Standard resolution (SR) 90 plates/hour • IPU: Extreme High Resolution & Slow Speed - for extremely high resolution applications when very low micron range sensitivity is required. Time to image (in Rhythm RT) Standard resolution (SR) 40 sec Plates are available in various size formats ranging from 70 mm (2.76”) wide to 1500 mm (60”) in length. LUT (look up table) Bit depth Linear (native Square root) Dimensions Scanner Weight Scanner including I/O table and light cover Scanner Interfaces Scanner including I/O table and light cover Ethernet, RJ45 Protective Cassettes A range of flexible and hard cassettes are also available. Both versions may be supplied with or without lead, depending on the application. High resolution (HR) High resolution (HR) 28 plates/hour 147 sec 16 Bit 56 x 56 x 47 cm (22” x 22” x 19”) 128 x 56 x 47 cm (52” x 22” x 19”) 45 kg (99 lbs) ASME ASME Code Section V Article 2 ISO 17636-2 Class A / Class B (in defined exposure conditions) IPS, IPS-2: 1/80, IPU: 1/40 IPS, IPS-2: S/80, IPU: S/40 EN2446-06 I/O Table with light cover Long I/O table Flight Case High speed plate Operation IPS High resolution IPS2 High resolution IPU Extremely high resolution (X-ray) Transport Mechanical conditions for transport Shock specifications In packaging IEC TR 60721-4-5 (1997): class 5M2 Certified by BAM Imaging Plates IPC2 15 °C to 35 °C (59 °F to 95 °F) Relative humidity 15% to 80% (non condensed) Magnetic field Compliant with EN 61000-4-8, Level 2 IEC721-3-2 (1997): class 2K2 and 2M3, with following restrictions Temperature -25 °C to +55 °C (-13 °F to 131 °F) Vibration 5 to 200 Hz (vertical, longitudinal, transversal axis) In packaging IEC 721-3-2 (1997): class 2M2 Certified by BAM Quick mountable, stainless steel, input/output table set with 43 cm (17”) tray length and light cover for input side Input/output extension for long plates scanning 150 cm (59”) Robust Flight Case with shock-absorbers, wheel, ruggedized handles and compartments for I/O tables, laptop, accessories Environmental Conditions Temp. allowed Verified with X-ray, Ir-192, Se-75, Co-60 Accessories 50 kg (110 lbs) CE, UL (NRTLus), cUL (cNRTLus), C-Tick, Customs Union Mark Standby max. 22 W 110 V - 240 V / 50-60 Hz During operation max. 140 W 110 V - 240 V / 50-60 Hz (absolute peak) Application Compliance EN14784-1 DC voltage, coded 8-pin, female Certifications Power consumption Use: CRxVision can scan any shape or size imaging plate from 20 to 1500 mm (0.75 to 60”) in length. Cassettes Flexible cassettes PVC or vinyl envelopes different sizes Hard cassettes (for defined exposure conditions) 35 x 43 cm, 20 x 24 cm, 24 x 30 cm, 15 x 30 cm 14” x 17”, 8” x 10”, 10” x 12”, 6” x 12” Regional Offices Europe Americas Asia Germany Niels-Bohr-Str. 7 31515 Wunstorf P.O. Box 6241 31510 Wunstorf +49 5031 172 0 United States 50 Industrial Park Road Lewistown, PA 17044 +1 866 243 2638 (toll free) +1 717 242 0327 China 5F, Building 1, No.1 Huatuo Road, Zhangjiang High-Tech Park, Shanghai 201203 +86 800 915 9966 (toll-free) +86 (0) 21-3877 7888 Bogenstr. 41 22926 Ahrensburg +49 4102 807 117 201 Beltway Green Pasadena, Texas 77503 +1 855 232 7470 Belgium Roderveldlaan 5 2600 Berchem +32 3 456 2820 United Kingdom Fir Tree Lane Groby LE6 0FH +44 845 601 5771 France 68, Chemin des Ormeaux Limonest 69760 +33 47 217 9216 Spain San Maximo, 31, Planta 4A, Nave 6 Madrid 28041 +34 915 500 59 90 Brazil Av. Maria Coelho Aguiar, 215 Building C, 6th floor Jd. Sao Luiz - Sao Paulo - SP CEP 05804-900 – Brazil +55 11 3614-1840 Unit 1602, 16/F Sing Pao Building 101 King’s Road North Point Hong Kong +852 2877 0801 Japan Harumi Island Triton Square Office Tower X 1-8-10, Harumi, Chuo-ku, Tokyo 104-6023 Tel: +81 3 6890 4567 Fax: +81 3 6864 1738 GE has sales and service offices all over the world. Below are some of our locations. Visit www.ge-mcs.com for a complete listing. • • • • • • • Alzenau, Germany Burford, United Kingdom Moscow, Russia Bucharest, Romania Prague, Czech Republic Stockholm, Sweden Milan, Italy • • • • • • • • East Perth, Australia Singapore Dubai, UAE Buenos Aires, Argentina Mexico City, Mexico Airdrie, Alberta, Canada Toronto, Ontario, Canada Montreal, Quebec, Canada www.ge-mcs.com/x-ray GEIT-40058EN (06/14) © 2014 General Electric Company. All Rights Reserved. Specifications are subject to change without notice. GE is a registered trademark of General Electric Company. Other company or product names mentioned in this document may be trademarks or registered trademarks of their respective companies, which are not affiliated with GE.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2014:06:13 10:26:48+02:00 Creator : Adobe InDesign CS6 (Macintosh) Modify Date : 2014:06:17 10:37:20+02:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2014:06:17 10:37:20+02:00 Creator Tool : Adobe InDesign CS6 (Macintosh) Instance ID : uuid:d8253ec7-85ca-4af3-befa-0a29de2182b0 Original Document ID : xmp.did:9AD8F01F9C21681188C6EC8277B92467 Document ID : xmp.id:CDD5CE4D642168118083A84262E1F8D9 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:FA637E996A256811822ADB8D6D0ADE77 Derived From Document ID : xmp.did:FA637E996A256811822ADB8D6D0ADE77 Derived From Original Document ID: xmp.did:9AD8F01F9C21681188C6EC8277B92467 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Macintosh) History Changed : / History When : 2014:06:13 10:26:48+02:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 5EXIF Metadata provided by EXIF.tools