Ge Appliances Dma Dms And Dmy Specification Sheet Outdoor Area Site Lighting Dimension Luminaire Spec |
Ge-Dma-Dms-And-Dmy-Specification-Sheet-650038 ge-dma-dms-and-dmy-specification-sheet-650038
2015-08-07
: Ge-Appliances Ge-Dma-Dms-And-Dmy-Specification-Sheet-650038 ge-dma-dms-and-dmy-specification-sheet-650038 ge-appliances pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
g AREA LIGHTING GE Lighting Solutions GUIDE FORM SPECIFICATIONS Dimension luminaire TM GENERAL DESCRIPTION The luminaire designated_______ (identify) shall be a GE DIMENSIONTM luminaire ordering number _______(specify DMA, DMY or DMS, plus ordering number logic from catalog) or approved equal, to operate one _______ specify [70, 100, 150 (55V), 250, 400 and 750] watt high pressure sodium [HPS] or [175, 250, 400, or 1000] watt metal halide) lamp from a nominal _______ (specify 120, 208, 220, 240, 277, 347 or 480 volt, 60 Hz or 220 or 240 volt, 50 Hz) power source and shall be capable of starting and operating the specified lamp within the limits specified by the lamp manaufacturer. The luminaire shall contain a completely prewired integral ballast and an optical assembly that shall provide a Distribution Type _______ (specify MC2, MC3, HTV, VT5, VT3 or FWT according to photometric selection table in the catalog). The luminaire shall be UL/cUL Listed SUITABLE FOR WET LOCATIONS. Ballast, housing, optical and luminaire assembly shall all be from the same manufacturer. MECHANICAL CONSTRUCTION The luminaire shall have a precision engineered, sealed and gasketed, all-aluminum housing and one-piece die-cast aluminum door. The door shall be hinged with two stainless steel butt type hinges, and shall be held shut with two stainless steel thumb latches for no-tool access to optical compartment. There shall be a decorative mounting arm of _______ (specify 4 or 12 inches or not supplied). All exposed aluminum surfaces shall have a _______ (specify dark bronze, black, white, charcoal gray or aluminum) polyester powder paint finish. There shall be a prewired photoelectric control receptacle available or a photoelectric control receptacle with shorting cap. DMY DMS DMA OPTICAL ASSEMBLY The optical assembly shall be rotatable 90° in either direction and have a heat/ impact resistant tempered glass lens. The optical assembly shall contain a mogul base E39 socket with superior lamp gripping. The socket shall have added insulation, giving it the ability to handle the higher pulse ratings of newer HID systems. The optical shall be sealed by a standard EPDM rubber gasket. *REFER TO PRODUCT PAGE FOR BALLAST SELECTIONS. FOR MORE DEFINITIVE INFORMATION, REFER TO BALLAST SPECIFICATIONS IN TECHNICAL DATA SECTION. BALLAST OPERATION The luminaire shall have a _______ (specify) type ballast* with an electrical quick disconnect. The plug-in type ignitor (for HPS only) and ballast shall be prewired to the lamp socket requiring connection of power supply leads only. The ballast shall be in full compliance with lamp-ballast specifications available to the fixture manufacturer from the lamp manufacturers at the time of fixture manufacture. The ballast shall reliably start and operate the lamp in ambient temperatures down to -20°F for metal halide and -40°F for HPS. Guide Form Specifications – 2011 g GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com 1-88 8 - 6 9 - 4 3-5 3 3 GE Lighting Solutions is a subsidiary of the General Electric Company. Evolve and other trademarks belong to GE Lighting Solutions. The GE brand and logo are trademarks of the General Electric Company. © 2011 GE Lighting Solutions. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : GE Outdoor Area Lighting Create Date : 2010:11:24 10:50:09-05:00 Keywords : Outdoor lighting, ge lighting, area lighting, Site Lighting, Dimension Luminaire, Spec Sheet.. Modify Date : 2013:09:25 19:51:05-04:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Instance ID : uuid:620d0b6e-2a30-494d-8cc1-754dd728c0a8 Document ID : xmp.did:841F11A31BF7DF11A86EE099FD0A2EDA Original Document ID : adobe:docid:indd:207f11c3-326f-11dd-8577-c0976879a092 Rendition Class : proof:pdf History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:28D6D5813625DF119A5EDB86DD4EF4E1, xmp.iid:29D6D5813625DF119A5EDB86DD4EF4E1, xmp.iid:2E78DF3840EBDF118934843943B0621F, xmp.iid:2F78DF3840EBDF118934843943B0621F, xmp.iid:3078DF3840EBDF118934843943B0621F, xmp.iid:736F38DBFAF6DF11A86EE099FD0A2EDA, xmp.iid:776F38DBFAF6DF11A86EE099FD0A2EDA, xmp.iid:786F38DBFAF6DF11A86EE099FD0A2EDA, xmp.iid:796F38DBFAF6DF11A86EE099FD0A2EDA, xmp.iid:7A6F38DBFAF6DF11A86EE099FD0A2EDA, xmp.iid:7B6F38DBFAF6DF11A86EE099FD0A2EDA, xmp.iid:7C6F38DBFAF6DF11A86EE099FD0A2EDA, xmp.iid:7F1F11A31BF7DF11A86EE099FD0A2EDA, xmp.iid:801F11A31BF7DF11A86EE099FD0A2EDA, xmp.iid:811F11A31BF7DF11A86EE099FD0A2EDA, xmp.iid:821F11A31BF7DF11A86EE099FD0A2EDA, xmp.iid:831F11A31BF7DF11A86EE099FD0A2EDA, xmp.iid:841F11A31BF7DF11A86EE099FD0A2EDA, xmp.iid:851F11A31BF7DF11A86EE099FD0A2EDA, xmp.iid:60647F321DF7DF11A86EE099FD0A2EDA, xmp.iid:61647F321DF7DF11A86EE099FD0A2EDA, xmp.iid:62647F321DF7DF11A86EE099FD0A2EDA, xmp.iid:CE7D38352DF7DF11A86EE099FD0A2EDA, xmp.iid:29FB0C77E1F7DF1188AAFEC19A31505B History When : 2010:03:01 08:47:26-05:00, 2010:03:01 08:47:26-05:00, 2010:11:08 13:46:21-05:00, 2010:11:08 13:47:26-05:00, 2010:11:08 13:47:42-05:00, 2010:11:23 07:11:52-05:00, 2010:11:23 07:26:53-05:00, 2010:11:23 07:26:53-05:00, 2010:11:23 07:27:46-05:00, 2010:11:23 07:28:40-05:00, 2010:11:23 07:28:40-05:00, 2010:11:23 11:04-05:00, 2010:11:23 11:06:31-05:00, 2010:11:23 11:10:42-05:00, 2010:11:23 11:10:42-05:00, 2010:11:23 11:11:56-05:00, 2010:11:23 11:12:46-05:00, 2010:11:23 11:12:46-05:00, 2010:11:23 11:13:04-05:00, 2010:11:23 11:19:04-05:00, 2010:11:23 11:20:48-05:00, 2010:11:23 11:20:48-05:00, 2010:11:23 13:13:20-05:00, 2010:11:24 10:49:45-05:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0 History Changed : /, /metadata, /, /, /, /, /metadata, /;/metadata, /, /metadata, /;/metadata, /, /, /metadata, /;/metadata, /, /metadata, /;/metadata, /, /, /, /metadata, /, / Derived From Instance ID : xmp.iid:831F11A31BF7DF11A86EE099FD0A2EDA Derived From Document ID : xmp.did:811F11A31BF7DF11A86EE099FD0A2EDA Derived From Original Document ID: adobe:docid:indd:207f11c3-326f-11dd-8577-c0976879a092 Derived From Rendition Class : default Metadata Date : 2013:09:25 19:51:05-04:00 Creator Tool : Adobe InDesign CS4 (6.0.6) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 9724 bytes, use -b option to extract) Doc Change Count : 99 Format : application/pdf Title : GE Outdoor Area Site Lighting Dimension Luminaire Spec Sheet | GE Lighting Description : Explore the GE Outdoor Area Site Lighting Dimension Luminaire. This specification sheet provides information such as mechanical construction, ballast operation, and optical assembly information for the GE Outdoor Area Site Lighting Dimension Luminaire. Creator : GE Outdoor Area Lighting Subject : Outdoor lighting, ge lighting, area lighting, Site Lighting, Dimension Luminaire, Spec Sheet Producer : Adobe PDF Library 9.0 Trapped : False Page Count : 2EXIF Metadata provided by EXIF.tools