Ge Appliances Hmaa Data Sheet Outdoor Roadway Lighting High Mast Luminaire |

Ge-Hmaa-Data-Sheet-649470 ge-hmaa-data-sheet-649470

178132 olp2938-ge-street-lighting-high-mast-hmaa-hmab-roadway-hid-datasheet_tcm201-61497

2015-08-07

: Ge-Appliances Ge-Hmaa-Data-Sheet-649470 ge-hmaa-data-sheet-649470 ge-appliances pdf

Open the PDF directly: View PDF PDF.
Page Count: 4

GE
Lighting Solutions
imagination at work
High Mast (HMAA & HMAB)
Roadway Lighting
Applications
• For large interchanges or parking lots and an
asymmetrical optical assembly for lighting straight
sections of roadways
Housing
• Cast aluminum ballast housing
• All noncorrosive hardware
• Stainless steel clampband
Finish
• Polyester powder gray paint finish
Rating
• 1598 Listed Suitable for Wet Locations
Mounting
• Universal 4-bolt slipfitter
Reflectors
• ALGLAS™ finish on aluminum faceted reflector
Unique Features
• Dead Back Terminal Board
• Mogul base socket -E39 standard
• ANSI C136 3G rating on all units
• Enclosed and Filtered Optical
• Heat and shock resistant tempered convex glass lens
• Optional flat glass lens for spillight and glare control
• IP-65 construction on all enclosed opticals
From HID to LED, GE continues to push Roadway Lighting to new heights. Recognized for the highest quality and reliability
in street, highway, parkway, and commercial applications, GE offers a wide selection of styles to meet the lighting needs
of municipalities, utilities, DOT customers and more.
Product Features
/
Ballast Selection Table
See Ballast and
Photometric Selection
Table
C = Sag glass lens
assembly
“shield ready”
F = Flat glass *
G = Glass - Sag
lens (Enclosed)
N = None (Open)
* = Previously IESNA
Full Cutoff Optics
NOTE: N is not
available for 1000
watt HPS.
E = Energy Act
Compliant Pulse
MH (EPMH)
S = HPS
M = MH
P = PMH
Standard: Lamp
not included.
PROD. ID
VOLTAGE
OPTIONS
PE
FUNCTION
LENS TYPE
(PRISMATIC)
REFRACTOR
IES DISTRIBUTION
TYPE
WATTAGE LIGHT
SOURCE
BALLAST
TYPE
SELECTION
1 = None
2 = PE Receptacle
HMAA =
High Mast
HMAB =
High Mast
40°C ambient
rating
40 = 400
75 = 750
01 = 1000
60Hz
1 = 120
2 = 208
3 = 240
4 = 277
5 = 480
D = 347
T = 220
50Hz
6 = 220
R = 230
Y = 240
NOTE:
For over
8 luminaires per
pole, use only
480V
See Ballast and
Photometric
Selection Table
S = Short
M = Medium
C = Cutoff «
N = Non-cutoff
S = Semi-cutoff
1 = Type I
2 = Type II
3 = Type III
4 = Type IV
5 = Type V
* = Previously
IESNA Full Cutoff
Optics
See Ballast
Selection Table
A = Autoreg
D =
Bilevel
System 3.
Contact
Manufacturer
for availability.
(Not available
with HMAB)
G = Mag-Reg
with
Grounded
Socket Shell
M = Mag-Reg
P = CWI with
Grounded
Socket Shell
F = Fusing
C/F = ISO Ignitor option
C/F = Ballast Tray option
Light
Wattage Source SC5(V) MC5(V) MS5(V) SC5(V) SS5(V) SC3(H) MC2(H) MC3(H) MC5(V) MS2(H) MS3(H) MS5(V) Narrow (H) MC2(H) MC5(V) SC5(V)
400 HPS 176288 176289 N/A 176310 N/A N/A 177349 179311 176312 N/A N/A N/A 178946 (MSIII) 177365 450454 450455
750 HPS N/A N/A N/A 178132 178130 N/A 178345 179144 178131 C/F N/A 178129 178947 (MSII) N/A N/A 452710
1000 HPS N/A N/A N/A 176318 N/A N/A 177310 177302 N/A N/A N/A N/A 178948 (SCI) 452981 N/A 453301*
400 EPMH C/F C/F C/F C/F N/A N/A C/F C/F 451185 C/F N/A 451168 C/F N/A N/A N/A
1000 MH 176294 176353 N/A 176323 N/A N/A 177308 N/A 176354 7307 N/A N/A 178949 (MSI) N/A N/A N/A
IES Distribution Type
Photometric Curve Number 35-
* Must use Reduced Jacket ED37 Lamp NOTE: N/A = Not available C/F = Contact Manufacturer (V) = Vertical Lamp (H) = Horizontal Lamp
For Hot Restrike Contact Manufacturer (Not available with HMAB) 400 PMH — Contact Manufacturer
PHOTOMETRIC SELECTION TABLE
Photometric Selection Table
_ _ _ _ - _ _ - _ - _ - _ - _ - _ - _ - _ _
Ordering Number Logic
High Mast (HMAA & HMAB)
Light
Wattage Source Multivolt 347 220 220 230 240
400 HPS A,D,G,K,M A,D,G,M N/A N/A N/A N/A
750 HPS A A N/A N/A N/A N/A
1000 HPS A A A A A A
1000 MH A,P A,P A A N/A N/A
400 EPMH A N/A N/A N/A N/A N/A
NOTE: N/A = Not available. *Not available in 120 X 347V
Ballast Type/Voltage
60Hz 50Hz
Open = N Sag lens = G Flat Glass = F
Door Glass Assembly (for retrofits) HMAA-22EGELS
15” Curved Shield ELS-HMAA060
(2)15” Curved Shields ELS-HMAA061
9” Squared Shield ELS-HMAA062
(2) 9” Squared Shields ELS-HMAA063
Nuisance 360 Shield ELS-HMAA360BL
HighMast Shielding
Highmast Shielding - ordered separately and
must use “C” as lens type in catalog logic for fixture.
OLP-2938 (Rev. 06/19/12)
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. The GE brand and logo are trademarks of the General Electric Company.
© 2012 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
• Approximate Net Weight:
55 lbs (25 kgs)
• Effective Projected Area:
2.5 sq. ft. max. (0.23 sq. M max.)
• Suggested Mounting Height:
Single Luminaire – 40-50 ft. (12-15 M)
Multiple Luminaires – 80-150 ft. (24-46 M)
DATA
Product Dimensions
ELS-HMAA060
(2) ELS-HMAA061
ELS-HMAA062
(2) ELS-HMAA063
360 NUISANCE SHIELD
ELS-HMAA360BL
Nuisance
Cutoff Shield 9” Squared
Light Shield 15” Curved
Light Shield
FRONT VIEW - SAG GLASS SIDE VIEW TOP VIEW
17.84 in.
(453mm)
7.3 in.
(185mm)
23.0 in.
(584mm)
25.0 in.
(635mm)
11.63 in.
(295mm)
23 in. DIA
(854mm DIA) 4.125 in.
(105mm)
2.00 in. PIPE
(2.375 in. OD)
(60mm OD)
FRONT VIEW - FLAT GLASS
17.84 in.
(453mm)
7.3 in.
(185mm)
23.0 in.
(584mm)
Effective Area maximum Weight
sq. ft. sq. m. lbs. kgs
BALLAST & OPTICAL 2.5 0.23 55 25
ELS-HMAA062 One 9” square 1.8 0.17 2.2 1.0
ELS-HMAA060 One 15” curved 1.8 0.17 2.2 1.0
ELS-HMAA063 Two 9” square 1.8 0.17 2.2 1.0
ELS-HMAA061 Two 15”curved 1.8 0.17 2.2 1.0
ELS-HMAA360BL 4.5 in 360 deg. 0.9 0.08 2.2 1.0
Ballast and Optical
Ballast & Optical, and Glare Shield Effective Projected Area Shields values do not include optical EPA.
Photometric Selection Table (with Highmast Shielding)
BASE CURVES HOUSE SIDE BOTH SIDES NUISANCE SHIELD ONLY
LIGHT
WATTAGE SOURCE DIST TYPE CURVE # Curved 15” Square 9” Curved 15” Square 9” 3.79” shield 360 deg
400 HPS MC2 7349 452600 452604 452606 n/a 452610
400 HPS MC3 9311 452601 452603 452607 n/a 452611
400 HPS MC5 6312 452602 452605 452608 452609 453112
750 HPS MC2 8345 452638 452640 452639 452641 452642
750 HPS MC3 9144 452643 452646 452644 452647 452645
750 HPS MC5 8131 452650 452651 452649 452652 452648
1000 HPS SC5 6318 452616 452617 452619 452618 452615
1000 HPS MC2 7310 452629 452630 452628 452631 452632
1000 HPS MC3 7302 452635 452636 452634 452637 452633
1000 MH SC5 6323 452655 452653 452656 452654 452657
1000 MH MC2 7308 452666 452664 452667 452663 452665
1000 MH MC5 6354 452658 452661 452659 452660 452662
1000 MH MS2 7307 452672 452675 452673 452676 452674

Navigation menu