Ge Appliances Isovolt Titan E Brochure

Ge-Isovolt-Titan-E-Brochure-648842 ge-isovolt-titan-e-brochure-648842

: Ge-Appliances Ge-Isovolt-Titan-E-Brochure-648842 ge-isovolt-titan-e-brochure-648842 ge-appliances pdf

Open the PDF directly: View PDF .
Page Count: 2

Column Stand

for ISOVOLT and ERESCO X-ray Equipment

The column-stand has been designed to accommodate com-

monly used stationary and portable X-ray system setups and

facilitate various types of X-ray inspections on a safe and

exible mobile platform.

It contains a robust chassis equipped with dierent wheel-

sets (depending on the ground surface), a column stand with

a height adjustable and rotatable holding xture, a carrier

plate for X-ray generators and accessories and a number of

tube-yokes with quick locks and brakes allowing rotation and

swivel. Additionally, the horizontal oset can be further ex-

tended by means of an optional telescopic holding xture.

Lifting range goes from approx. 500 mm (19.7”) to

approx. 2700 mm (106.3”) and can be ergonomically adjusted

by a self-arresting crank drive.

The carrier plate of the column stand provides space for a

complete bi-polar ISOVOLT Titan E generator set including

a standard cooler and the required counterbalance. Cable

clamps and ties are attached to support and simplify High-

Voltage cable routing.

GE

Measurement & Control Solutions

Column Stand

Column Stand

with Tube Yoke

for ISOVOLT 420/450 kV Tubehousing

2553652

Column Stand

with Tube Yoke

for ISOVOLT 420 kV Tubehousing

2553622

Column Stand

with Tube Yoke

for ISOVOLT 225 kV Tubehousing

2553632

Column Stand

with Tube Yoke

for ISOVOLT 160 kV Tubehousing

2553642

Telescopic Holding Fixture

6313370

Column Stand with Support Fork for ERESCO 42 MF3/4

2553701

Column Stand with Support Fork for ERESCO 65 MF3/4

2553702

© 2010 General Electric Company. All Rights Reserved. Specications are subject to change without notice. GE is a registered trademark of General Electric Company. Other company or product names

mentioned in this document may be trademarks or registered trademarks of their respective companies, which are not aliated with GE.

Contact: GE Sensing & Inspection Technologies GmbH, Bogenstrasse 41, 22926 Ahrensburg, Germany, T +49 (0)4102 807 0

GEIT-30058EN (11/10)

www.ge-mcs.com

range approx.

350 mm (13.8”) 695 mm (27.4”)

min. approx. 500 mm

(19.7”)

range approx. 2200 mm (86.6”)

overall height approx. 3080 mm (121.3”)

1010 mm (39.8”)

1350 mm (53.2”)