Ge Appliances P16M And P17M Specification Sheet Outdoor Area Lighting Decorative Post Top Luminaire Mount Spec |

Ge-P16M-And-P17M-Specification-Sheet-650033 ge-p16m-and-p17m-specification-sheet-650033

: Ge-Appliances Ge-P16M-And-P17M-Specification-Sheet-650033 ge-p16m-and-p17m-specification-sheet-650033 ge-appliances pdf

Open the PDF directly: View PDF .
Page Count: 2

AREA LIGHTING

Guide Form Specifications – 2011

gGE

Lighting Solutions

GUIDE FORM SPECIFICATIONS

GENERAL DESCRIPTION

The decorative post top luminaire designated _______ (identify)

shall be a GE POST MOUNT luminaire, consisting of ordering

number _______ (specify P16M or P17M) luminaire, ordering

number _______ (specify P16M or P17M, plus ordering number

logic from catalog), or approved equal, to operate one _______

(specify [70, 100 or 150(55V)] watt high pressure sodium [HPS]

or 175 watt metal halide or mercury) lamp from a nominal

_______ (specify 120, 208, 220, 240, 277, 347 or 480 volt, 60 Hz

or 240 volt, 50 Hz) power source. The luminaire shall include a

completely prewired integral ballast and an optical assembly

that shall provide an IES Distribution Type _______ (specify

MN2, MN3, MS5 or SN5 according to photometric selection

table in catalog). The luminaire shall be ULcUL Listed SUITABLE

FOR WET LOCATIONS when polycarbonate refractor is used and

“U” option is chosen. Standard construction is IP54. Ballast,

housing, optical and luminaire assembly shall all be from the

same manufacturer. OPTICAL ASSEMBLY

POST MOUNT LUMINAIRES

The optical assembly shall contain a mogul base E39 socket

with superior lamp gripping. The socket shall have added insu-

lation, giving it the ability to handle the higher pulse ratings of

newer HID systems. The optical assembly shall have _______

(specify an acrylic or a polycarbonate resin prismatic refractor

[may be UL1572 Listed SUITABLE FOR WET LOCATIONS and CSA

Certified]).

* REFER TO PRODUCT PAGE FOR BALLAST SELECTIONS. FOR

MORE DEFINITIVE INFORMATION, REFER TO BALLAST SPECIFICA-

TIONS IN TECHNICAL DATA SECTION.

MECHANICAL CONSTRUCTION

The luminaire shall include a die-cast aluminum ballast housing

with hinged and gasketed spun aluminum canopy having stain-

less steel latch for no-tool relamping, refractor, plug-in ignitor

(HPS lamps only), ballast and terminal board and corrosion

resistant hardware. A prewired photoelectric control receptacle

shall be available. Canopy, decorative scrolls (P16M only) and

housing shall be painted _______ (specify black [standard for

P16M], dark bronze or gray [standard for P17M]).

BALLAST OPERATION

The luminaire shall have a _______ (specify) ballast*. The plug-

in type ignitor (for HPS only) and ballast shall be prewired to the

lamp socket requiring connection of power supply leads only.

The ballast shall be in full compliance with lamp-ballast speci-

fications available to the fixture manufacturer from the lamp

manufacturers at the time of fixture manufacture.

The ballast shall reliably start and operate the lamp in ambi-

ent temperatures down to -20°F for mercury or metal halide or

-40°F for HPS.

gGE Lighting Solutions is a subsidiary of the General Electric Company. Evolve and other trademarks belong to GE Lighting Solutions. The GE brand and logo are trademarks of the General Electric Company.

© 2011 GE Lighting Solutions. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.

GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com

1 6 9 4 3 5 3 3- - -- 8 8 8