Ge Appliances Phoenix Micromex Brochure

Ge-Phoenix-Micromex-Brochure-648919 ge-phoenix-micromex-brochure-648919

: Ge-Appliances Ge-Phoenix-Micromex-Brochure-648919 ge-phoenix-micromex-brochure-648919 ge-appliances pdf

Open the PDF directly: View PDF .
Page Count: 4

phoenix microme|x DXR-HD

High resolution 180 kV microfocus X-ray system for

CAD based 2D µAXI of solder joints and electronic

components with 3D CT option

Brilliant high dynamic imaging with live CAD data overlay

Open BGA ball with live

CAD data overlay

3D Computed Tomogra-

phy of a ceramic SMD IC

Automated PTH solder

joint inspection with live

CAD data overlay

Unique features

•TemperaturestabilizeddigitalDXRdetectorwith

active cooling for high dynamic live imaging

•180kV/20Whigh-powersubmicrontubewith

up to 0.5 µm detail detectability

•x|actpackageforCADbasedµAXIprogram-

ming and automatic inspection

•diamond|windowforupto2timesfasterdata

acquisition at the same high image quality level

as a new standard

•Optionally3Dcomputedtomographyscans

within 10 seconds

GE

Measurement & Control

phoenix microme|x DXR-HD

The high performance X-ray inspection solution

The phoenix microme|x DXR-HD combines high-resolution 2D X-ray technology and computed to-

mography in one system. Innovative and unique features and an extreme high positioning accura-

cy make the system the effective and reliable solution for a wide spectrum of 2D and 3D inspection

tasks: R&D, failure analysis, process and quality control as well as automated offline inspection.

The phoenix|x-ray x|act technology offers easy to program CAD based µAXI ensuring automated

inspection in the micrometer range. Another unique benefit is GE´s highly dynamic DXR flat panel

detector with active cooling. Offering up to 30 frames per second, it provides outstanding brilliant

live imaging and fast data acquisition for 3D CT.

Brilliant DXR-HD live imaging

Voids in a single BGA ball: 1,970x geo-

metriczoomforextremehighmag-

niction

With GE´s proprietary high dynamic DXR detector with enhanced scintillator

technology phoenix|x-ray introduces a new industry standard for efficient

live inspection:

• Full frame rate of 30 frames per second at 1000x1000 pixels offers low noise coupled

with brilliant image quality ensuring fast and detailed live inspection

• Activetemperaturestabilizationforpreciseandreliableinspectionresults

• Extremely fast data acquisition in 3D CT mode

• Detail detectability down to 0.5 µm for high performance failure analysis

Compared to conventional beryllium targets, the diamond|window

of the microme|x DXR-HD allows higher power at a smaller focal

spot. This ensures high-resolution even at a high output.

• Up to 2 times faster CT data acquisition at the same high image

quality level

• High output with high-resolution

• Non-toxic target

• Improved focal spot position stability within long term measurements

• Increased target lifetime due to less degradation with higher power

density

High output with high-resolution: diamond|window

diamond|window beryllium window

Separated 3D CT image of a POP-

layer with not well joined balls

High-resolution 3D computed tomography

For advanced inspection and three-dimensional analysis of smaller

samples, phoenix|x-ray’s proprietary 3D-CT technology is available as an

add-on for the microme|x DXR-HD.

• 180 kV high power X-ray technology, fast image acquisition with DXR detector and

diamond window combined with phoenix|x-rays fast reconstruction software deliver

high quality inspection results

• Performing of 3D CT scans within just 10 seconds

• Maximumvoxelresolutiondownto2microns,dependingonthesamplesize

(sameX-raytubeparameter:130kV,11.4W)

x|act pro - CAD based inspection:

high resolution µAXI for extremely high defect coverage

As a solution for µAXI with extremely high defect coverage, phoenix|x-ray provides its high preci-

sion system microme|x DXR-HD including the unique x|act pro software package for fast and easy

offline CAD programming. Outstanding precision and repeatability, small views with resolutions of

only a few micrometers, 360° rotation and oblique viewing up to 70° ensures meeting highest qua-

lity standards - even for inspection of components with a pitch of just 100 microns. Besides the au-

tomated X-ray inspection, x|act pro ensures an easy pad identification by its live CAD data overlay

function even in manual inspection.

•Brilliant live inspection images due to high dynamic GE DXR

digital detector array

•Unique180kV/20Whighpowersubmicrontubeforhigh

absorbing samples

•Minimizedsetuptimeduetohighlyefficientautomated

CAD programming

•LiveoverlayofCADandinspectionresultseveninrotated

oblique inspection views

•Extremelyhighdefectcoverageandrepeatability

•Outstanding ease-of-use

•Detail detectability down to 0.5 µm

•Inspection results and images include correct pad numbering

for easy rework

•Optionallyadvancedfailureanalysiswithhighresolution3DComputedTomography

•OptionallyCTscansupto10seconds

phoenix microme|x HD – Your Advantages

EfficientCADprogramming–minimizedsetuptime

x|act pro provides not only a minimal setup time compared with conven-

tional view based AXI - once programmed, the inspection program is

portable to all x|act compatible systems.

• Import of CAD-data

• Easypad-basedoineprogramming

• Specicinspectionstrategiesfordierentpadtypes

• Fully automated generation of the inspection program even in oblique view

and multiple angular positions per component

• Full program portability for all x|act compatible phoenix|x-ray systems

Fast and easy programming: just assign the in-

spection strategies and let x|act generate the

automated inspection program

Repeatably high defect coverage

• Extremely high positioning accuracy even at oblique viewing and rotation

• Easy pad identification in manual X-ray inspection

• High reproducibility on large PCBs

x|act provides live CAD overlay and inspection

results in the x-ray live image - at any time, at

any viewing angle

©2011GeneralElectricCompany.AllRightsReserved.Specicationsaresubjecttochangewithoutnotice.GEisaregisteredtrademarkofGeneralElectricCompany.Othercompanyorproductnames

mentionedinthisdocumentmaybetrademarksorregisteredtrademarksoftheirrespectivecompanies,whicharenotaliatedwithGE.

GEIT-31343EN(10/12)

TechnicalSpecications&Congurations

Systemmagnicationandresolution

Geometricmagnication: max. 1,970 x

Totalmagnication: max. 2,660 x

Detail detectability: up to 0.5 µm

180kVmicrofocusX-raytube

Type Low maintenance open microfocus tube with

unlimited lifetime, transmission type, 170° cone

angle, collimated

Maximaltubevoltage 180 kV

Maximaltubeoutput 20W

Target: non-toxic diamond|window (tungsten on CVD

support)forupto2timesfasterdataacquisitionat

the same high image quality level

Filament: Tungsten hairpin, pre-adjusted in plug-in cartridges

for fast and easy exchange

High dynamic DXR detector

Type: GEDXR250RT,temperaturestabilizedwithactive

cooling for brilliant live imaging and extremely fast

CT data acquisition

Pixels: 1000 x 1000 pixels

Resolution(pixelsize): 200 x 200 micrometer

Frame grabbing rate: Up to 30 fps at full frame

Precise manipulation

General construction: high-precision vibration-free synchronised 5-axes

manipulation

Max.inspectionarea: 460mmx360mm(18"x14")

610mmx510mm(24"x20")withoutrotationtable

Max.samplesize/weight: 680mmx635mm(27"x25")/10kg(22lbs.)

ovhm – oblique view at continuously adjustable view angle up to 70°,

highest magnification : rotation 0° - 360°

Control:  Joystickormousecontrol(manualmode)andCNC

(automaticmode)

Manipulationaids: sample X-ray mapping, click'n-move-to function,

click'n-zoom-tofunction,automaticisocentric

manipulator movement, laser crosshair

Anti-Collision System: may be deactivated for maximum magnification (tube

touchingthesample)

System dimensions

Dimensions(WxHxD): 2,020 mm x 1,920 mm x 1,860 mm (79.5" x 75.6" x

73.2");(Dwithconsole:2,160mm(85”)

Min.transportationwidth: 1,560mm(61.4")

Weight: appr.2,600kg/5,732lbs.

Radiation Protection

The radiation safety cabinet is a full protective installation without type approval

according to the German RöV and the US Performance Standard 21 CFR 1020.40.

Foroperation,otherociallicensesmaybenecessary.

Advancedimageprocessing(16bit)

x|act pro: comprehensive CAD based X-ray inspection

software comprising image enhancement functions,

measuring functions and fast and easy automated

CAD based programming for automatic inspection

bga|module(standard): for automatic view based BGA solder-joint evaluation

incl. automatic wetting analysis

vc|module(standard): automatic view based voiding calculation software

package incl. capability of multiple die attach voiding

evaluation

SoftwareConguration(Option)

x|act BGA check strategy: automated CAD based analysis of BGA solder joints

x|act PTH check strategy: automated CAD based analysis of PTH solder joints

qfp|module: automated QFP solder joint evaluation

qfn|module: automatedinspectionofQFN/MLFsolderjoints

pth|module: automated pin-through-hole solder joint evaluation

c4|module: view based evaluation of round solder joints with

background structure, such as C4 bumps

ml|module: view based registration of multilayer printed circuit

boards

quality|review: visual interface for rework and failure indication

HardwareConguration(Option)

Tilt/rotateunit: tilt ± 45° and rotation n x 360° for samples up to 2 kg

Manualbarcodereader: for product identification

ComputedTomography(Option)

Upgradepackageforcombined2D/3D(computedtomography)operation

CT-unit: precision rotation axis

Volumeacquisition/

reconstruction software: phoenix datos|x

Max.geom.magnification: 100x(CT)

Max.voxelresolution: downto2µm,dependingonthesamplesize

Visualizationsoftware: Volume Viewer

www.ge-mcs.com/phoenix

GE Sensing & Inspection Technologies GmbH

phoenix|x-ray

Niels-Bohr-Str. 7

D-31515Wunstorf

Germany

Tel.: +49 5031 172 0

Fax: +49 5031 172 299

E-mail: phoenix-info@ge.com

GEInspectionTechnologies,LP

50 Industrial Park Rd

Lewistown, PA 17044

USA

Tel.: 717 242 03 27

Fax: 717-242-2606

E-mail: phoenix-usa@ge.com