Ge Mv7000 Brochure

Ge-Mv7000-Brochure-656544 ge-mv7000-brochure-656544

: Ge Ge-Mv7000-Brochure-656544 ge-mv7000-brochure-656544 ge pdf

Open the PDF directly: View PDF .
Page Count: 9

ecomagination

MV7000

Reliable, high performance

medium voltage drive

GE

Power Conversion

Cutting-edge power electronics

technology and decades of process

expertise come together in the

MV7000 — a world-class water-cooled

medium voltage drive suitable for

a wide range of power conversion

applications. Easy to install and

maintain, the drive offers high

reliability and availability and helps

increase the uptime of critical

processes. The MV7000 provides

a flexible approach to achieve a

customized solution across different

applications.

With the MV7000 our power

conversion expertise helps increase

operating efficiency, power availability,

plant throughput, operational

precision, and process yield. We are

helping our customers meet the

demands and opportunities of the

new electric age.

Benefits:

• Peak power density — our drive

can deliver up to 15 MW with just

18 IGBTs, which is equivalent

to a power density of 1.5 MVA/m3

• High reliability and availability —

over 10 million hours in operation

across an installed base of over

8.5 GW

• Power scalability with à la carte

option packaging that can be

adapted to a wide range of

applications

• A full family of drives — GE is

your one-stop provider with a

wide portfolio of drives

The next generation of drive technology

The MV7000 belongs to GE’s wide range of drives for all applications.

5-6.6

4.1-6

3.3

2.4

2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 81.0

2-3 x MV7900

3GE I MV7000

Advantages of a medium voltage variable

frequency system

Key benefits

• Peak power density

• High reliability and availability

• Power scalability with customizable

options featuring:

– Low harmonics without

additional equipment

– Four quadrant operation for

regenerative applications

– Transformerless design for

compactness

– Common DC bus system for energy

savings

– High performance process control

– Visor Connect supports warranty

with remote real-time support

and advice

• Front access maintenance

Best-in-class power density

The phase power stack is the main

modular building block of the three-

level inverter.

• Compact enclosures thanks to

double sided cooling of the IGBTs

• Just 18 IGBTs at 3.3 kV can

deliver 15 MW

• Control hardware mounted

on a slide in/out frame

• Simplified cooling system

architecture and gate drive

power supply topology

• Fuseless design

Industry sector Applications

Oil and gas eLNG trains, injection compressors and pumps, gas

storage, multiphase pumps, pipeline compressors

Marine Cruise ships, LNG carriers, offshore drilling vessels,

research vessels, megayachts, merchant vessels,

navy support vessels

General and

heavy industry

Metal rolling mills, test benches, grinders, water pumps,

mine winders, crushers, ID fans, FD fans, wind turbines,

static frequency converters, boiler feed pump, power

quality systems

Reliability & availability

The higher reliability and lower

maintenance needs of a variable

speed drive system compared to

gearboxes and hydraulic couplings

result in lower lifecycle cost.

Saving energy, caring for

the environment

In today’s world more than ever,

energy saved is energy produced.

For a variety of loads, from water

pumps to gas compressors, variable

speed control offers the best way

to capture energy savings.

Precise power delivery

In many applications, the superiority

of electrical control simply cannot

be matched by mechanical systems.

Precise control of power means better

outcomes, from the flatness of a steel

sheet to the accuracy of offshore

Oil & Gas exploration.

MV7000 — Enhanced technology

Inverter cubicle

Pawer stack

Variable frequency drives can be used in a variety

of industries and applications

54 GE I MV7000 GE I MV7000

High reliability and availability

The MV7000 is a great example

of a design philosophy based on

minimizing component count while

retaining peak performance.

Press-pack IGBT (PPI) power

devices enable:

• The capability to limit overcurrent

with safe turn-off under all operating

and failure conditions

• Case rupture-free due to pressed

contacts and no-wire bonding

• N+1 series redundancy thanks to

the capability of PPI for continuous

conduction under failure mode

• Long life expectancy even under

load cycling

• Effective performance even at low

motor frequency operation

Low harmonics without

additional equipment

• Available in 12, 24 and 36-pulse

configurations

• Low levels on harmonics –

IEEE 519 compliant

• No additional filters necessary

• Fully able to handle faults such

as voltage dips

• For reversing applications, an

active-front-end (AFE) is available

Four quadrant operation

for energy savings

• Regeneration of the energy to

the network through IGBT bridge

• Unity power factor

• Sinusoidal input with negligible

harmonics

Power scalability with customizable options

MV7000 comes in a standard Diode-Front-End (DFE) rectifier configuration.

Diode front-end (DFE)

Active

Front End DC Bus Inverter

NP

NP

Rectifier DC Bus Inverter

Active front-end (AFE)

Control Cubicle

Cooling Unit

Pre-charge &

Pre-magnetizing

Diode front-end

DC Capacitor

filter

Inverter

AC Output

Inside look at the MV7000 Output voltage and current

76 GE I MV7000GE I MV7000

Transformerless design

for compactness

The MV7000 is available in

transformerless design

• AFE with additional input filter

to reduce line harmonics

• Big savings in capital cost,

installation cost and footprint

• Increased overall system

efficiency and reliability

Common DC bus system

for energy savings

For multi-drive applications, a

common DC link system is available

• Shared Active-Front-End (AFE)

rectifier configuration

• Saves energy by the redistribution

of power from braking

• Reduction in overall equipment

cost, operating cost and footprint

High performance

process control

MV7000 is equipped with a standard

Power Electronics Controller (PECe)

• Mounted on slide in/out frame for

easy access and compactness

• Advanced Vector Control (AVC)

• Fast dynamic response

• Clean, robust power delivery

• Fully customizable

Transformerless design

Active

Front End Machine

Bridge

Input Filter Active

Front End DC Bus Inverter

NP

+

-

Common DC bus system

Visor Connect provides secured

remote connection to GE equipment

(outside the control network).

Remote connection enables GE‘s

service engineers to provide real-time

support, ongoing health analytics

and key performance indicators

(KPIs), as well as basic configuration

management support.

Key benefits

• Reduce unscheduled downtime

• Real-time support and advice

• Customers can access GE’s

global Services organization

24/7, 365 days a year from

anywhere in the world

Dedicated

Portal

GE PC remote

engineer

Remote Connection Site Equipment

Central Data

Warehouse

and Analytics

Visor Connect

with Proficy

historian

GE PC Global

Service Operations Machines

Drives

Automation

& DP

GE

Visor Connect: Remote connection

to equipment, monitoring and support

Anywhere Customer Site

Visor DMZ

98 GE I MV7000GE I MV7000

Feature suite for

every application

Standard product customizable with

pre-engineered options including, but

not limited to:

• Redundant pump for cooling

• Customizable process control

• DB chopper

• Communication protocols

• Harsh environment packaging

• Vibration and shock reinforcement

• Marine-class package

• Up and down synchronous transfer

Motor friendly

• Suited for synchronous induction

and permanent magnet motors

• Output waveforms reduce motor

losses

• Reduced motor noise and vibration

• No significant motor shaft torque

pulsations

• Wide speed range with a consistent

response

MV7000 — À la carte option packaging

Incoming power dip

ride-through

The MV7000 provides incoming power

loss ride-through and keeps the

process running without tripping.

Under-voltage operation

The MV7000 operates continuously

and provides power to the motor at

a lower input supply voltage (down

to 70% of nominal voltage).

Flying start into a

spinning load

The MV7000 offers the ability to

catch and take control of a spinning

load without any damaging torque,

voltage or current impacting the

equipment if started while the load

is already spinning.

Critical speed avoidance

The MV7000 can be programmed for

up to three critical frequency bands

and ride-through these without any

resonance issues.

Independent acceleration

and deceleration ramps

The MV7000 can be be programmed

into the drive controls as needed for

controlled starting and stopping of

the load.

Process control benefits

High performance control

11GE I MV700010 GE I MV7000

MV7000 ratings Dimensions & weights

Table shows the typical ratings for variable torque load applications. Please contact GE sales for constant torque applications.

Output

voltage

VFD

frame size

Rectifier

type

Power

output

Output

current

MW MVA A

3.3kV

MV7303 DFE 12p 3.8 4.3 750

MV7303 AFE 3.8 4.3 750

MV7306 DFE 12p 6.9 7.7 1350

MV7306 AFE 6.9 7.7 1350

MV7310 DFE 12p 10.8 12 2100

MV7310 AFE 8.8 9.8 1550

MV7312 DFE 24p 13.3 14.8 2600

MV7312 AFE 13.3 14.8 2320

MV7315 DFE 24p 15 17 2900

MV7315 AFE 13.3 17 2320

2xMV7310 2xDFE 12p 21.6 24 4200

2xMV7310 AFE 17.6 19.6 3100

2xMV7312 2xDFE 24p 26.6 29.6 5200

2xMV7312 AFE 26.6 29.6 4640

2xMV7315 2xDFE 24p 30 34 5800

2xMV7315 AFE 26.6 34 4640

5.2kV MV7607 DFE 24p 7 8.6 950

MV7615 DFE 24p 14 16.2 1800

6.6kV

MV7609 DFE 24p 10 12.6 1100

MV7609 AFE 8 10 800

MV7616 DFE 24p 15.4 17 1500

MV7618 DFE 24p 18 22.8 2000

MV7618 AFE 14.3 17.9 1250

8.2kV MV7821 DFE 36p 21 21.3 1500

10kV

MV7913 DFE 36p 13 17.1 1000

MV7927 DFE 36p 27 33.7 2000

MV7927 AFE 21.4 26.7 1250

2xMV7927 2xDFE 36p 54 67.4 4000

3xMV7927 3xDFE 36p 81 101 6000

Output

voltage VFD

frame size Width Depth Weight

inches/mm inches/mm lbs./kg

3.3kV

MV7303 157 / 4000 39 / 1000 8818 / 4000

MV7303 189 / 4800 39 / 1000 10582 / 4800

MV7306 173 / 4400 39 / 1000 9700 / 4400

MV7306 205 / 5200 39 / 1000 11464 / 5200

MV7310 173 / 4400 39 / 1000 9700 / 4400

MV7310 220 / 5600 39 / 1000 12346 / 5600

MV7312 189 / 4800 39 / 1000 10582 / 4800

MV7312 252 / 6400 39 / 1000 14109 / 6400

MV7315 197 / 5000 39 / 1000 11023 / 5000

MV7315 260 / 6600 39 / 1000 14550 / 6600

2xMV7310 425 / 10800 39 / 1000 23810 / 10800

2xMV7310 441 / 11200 39 / 1000 24692 / 11200

2xMV7312 457 / 11600 39 / 1000 25574 / 11600

2xMV7312 582 / 14800 39 / 1000 32627 / 14800

2xMV7315 472 / 12000 39 / 1000 26455 / 12000

2xMV7315 520 / 15200 39 / 1000 33508 / 15200

5.2kV MV7607 291 / 7400 55 / 1400 16314 / 7400

MV7615 299 / 7600 55 / 1400 16754 / 7600

6.6kV

MV7609 291 / 7400 55 / 1400 16314 / 7400

MV7609 409 / 10400 55 / 1400 22928 / 10400

MV7616 299 / 7600 47 / 1200 16754 / 7600

MV7618 299 / 7600 55 / 1400 16754 / 7600

MV7618 425 / 10600 55 / 1400 23368 / 10600

8.2kV MV7821 402 / 10200 55 / 1400 22487 / 10200

10kV

MV7913 386 / 9800 55 / 1400 21605 / 9800

MV7927 402 / 10200 55 / 1400 22486 / 10200

MV7927 567 / 14400 55 / 1400 31745 / 14400

2xMV7927 803 / 20400 55 / 1400 44972 / 20400

3xMV7927 1205 / 30600 55 / 1400 67458 / 30600

1312 GE I MV7000 GE I MV7000

.

Services from GE – a focus on availability

We understand the vital importance

of process availability – and our focus

on service keeps us actively engaged,

both when things are going right, and

when they are going wrong.

Our world-class Global Customer

Service and Support Center is available

24/7, 365 days a year. Our strategic

distribution centers and authorized

distributors carry an extensive

inventory of GE’s drives, allowing us to

quickly fulfill your genuine replacement

part needs, no matter where you are

located.

With a comprehensive global network

of service engineers and technicians,

GE is uniquely positioned to provide

the knowledge, experience and skills

for your full range of industrial service

requirements. From system design to

maintenance and outage support, we

have the resources and capabilities

to advance your equipment‘s

performance and reliability. Some key

benefits of GE’s support are:

• Single point of contact

• Reduced call-out rates

• 24/7 availability

• Rapid mobilization of engineers

• Routine maintenance visits

• Training

• System health checks

• Spares management

• Obsolescence management

GE also provides managed system

upgrade paths for our legacy systems

and has significant experience

in replacing systems from other

manufacturers with low disruption

to the existing infrastructure.

Visor Connect, GE’s remote diagnostic

and support system, is based on highly

secure satellite communications links.

It enables our experts, regardless

of their geographical location, to

look over the shoulder of your onsite

equipment operator or technician and

advise and assist you on fault finding

and resolution.

VFD ratings

Output power 3 – 81 MW

Output voltage up to 10 kV

Output frequency 15-90 Hz, 0 to 15 Hz on request

Input voltage 3 to 10 kV ±10%

Input frequency 50 or 60 Hz ±5%

Auxiliary voltage 3 phase, 400 V, 440 V, 480 V, or 600 V; 50/60 Hz

1 phase, 110 V, 230 V, 50/60 Hz

Power quality

Line side converter DFE 12 to 36-pulse / AFE IGBT 6-pulse

Load side inverter 3-level VSI; IGBTs

VFD system efficiency Up to 99%

Power factor >0.96 (DFE) / 1 (AFE)

Input harmonics IEEE 519 compliant

Energy storage

DC link Self-healing, long life, film capacitors

VFD control

Mode of operation Four-quadrant

Mode of control Flux vector / without encoder / induction motor & synchronous (option)

Analog input / output (3) inputs / (3) outputs +/-10 Vdc or 4-20 mA standard

Digital input / output (6) inputs / (6) outputs standard

Speed regulation <0.5% without encoder and <0.1% with encoder

LAN interface Ethernet modbus standard

optional: profibus; devicenet

Protective functions Over-current, current limit, over and under-voltage, motor stall

Environment & enclosure

Enclosure IP31, IP33, IP44, others on request

Ambient / elevation 0-45ºC / 1000m above sea level; higher with de-rating

Insulation coordination Pollution degree 2 per EN 61800-5-1 and EN 50178

Industry standards

Standards IEC 61800-3, IEC 61800-4, IEC 61800-5

Qualification to industry-specific standards available

Marine classification society/compliant

MV7000 drive specifications

Remote support

1514 GE I MV7000 GE I MV7000

www.gepowerconversion.com

Copyright © 2013 General Electric Company and/or its affiliates.

All rights reserved. GEA30737A (12/2014)

MAIN OFFICES

Australia, Botany

Tel: +61 (0) 2 8313 9980

Brazil, Minas Gerais

Tel: +55 31 3330 5800

Canada, Mississauga

Tel: +1 905 858 5100

Chile, Santiago

Tel: +56 2 652 6500

China, Shanghai

Tel: +86 21 6198 2600

France, Massy Cedex

Tel: +33 1 77 31 20 00

Germany, Berlin

Tel: +49 30 7622 0

India, Chennai

Tel: +91 44 4968 0000

Japan, Tokyo

Tel: +81 3 5544 3852

Norway, Oslo

Tel: +47 67 83 82 50

Russia, Moscow

Tel: +7 495 981 13 13

Singapore

Tel: +65 6332 0940

South Africa, Midrand

Tel: +2711237 0000

South Korea, Busan

Tel: +82 51 710 9015

UAE, Dubai

Tel: +971 44296161

UK, Rugby

Tel: +44 1788 563 563

USA, Pittsburgh

Tel: +1 412 967 0765