Ge Usm 36 Operating Manual Technical Reference And
Ge-Usm-36-Operating-Manual-648993 ge-usm-36-operating-manual-648993
2015-03-09
: Ge Ge-Usm-36-Operating-Manual-648993 ge-usm-36-operating-manual-648993 ge pdf
Open the PDF directly: View PDF
Page Count: 306 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- 第一操作级别(基础)
- 第一操作级别(备选)
- 第二操作级别l
- 第二操作级别(续)
- 状态显示图标
- 电源电量指示
- 键盘功能
- 介绍 1
- 标准包装和附件 2
- 初始启动 3
- 工作原理 4
- 操作 5
- 5.1 功能概述
- 5.2 设置增益
- 5.3 功能键的分配
- 5.4 设置显示范围(“范围”功能组)
- 5.5 设置脉冲发射器(“脉冲发射器” 功能组)
- 5.6 设置接收器 (“接收器”功能组)
- 5.7 设置闸门 (功能组“A 闸门” 和“B 闸门”)
- 5.8 校准 USM 36
- 5.9 进行测量
- 5.10 参考波测量(“参考模式”功能组)
- 5.11 焊缝等级 (“AWS D1.1” 功能组)
- 5.12 使用斜探头计算缺陷位置
- 5.13 定义探头角度
- 5.14 启用选项(升级)
- 5.15 USM 36 的检测任务配置
- 5.16 设置显示
- 5.17 一般设置
- 5.18 距离-幅度曲线 (DAC)模式
- 5.19 符合JIS Z3060-2002 标准的 JISDAC
- 5.20 符合中国标准 JB/T4730 和 国标 11345 的CNDAC
- 5.21 符合 DGS 方法的评估
- 文件编制 6
- 维护和保养 7
- 接口和外围设备 8
- 附录 9
- 规格 10
- 索引 11