GemTek Technology A970423G MoCA TO WIRELESS ADAPTER User Manual Cisco Model DPH650 Wireless MoCA Acces Point

Gemtek Technology Co., Ltd. MoCA TO WIRELESS ADAPTER Cisco Model DPH650 Wireless MoCA Acces Point

Manual

Download: GemTek Technology A970423G MoCA TO WIRELESS ADAPTER User Manual Cisco Model DPH650 Wireless MoCA Acces Point
Mirror Download [FCC.gov]GemTek Technology A970423G MoCA TO WIRELESS ADAPTER User Manual Cisco Model DPH650 Wireless MoCA Acces Point
Document ID996362
Application IDVuABDn1o5/OmyhvrJJ0f+g==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize52.22kB (652753 bits)
Date Submitted2008-09-05 00:00:00
Date Available2008-09-05 00:00:00
Creation Date2008-08-27 11:02:52
Producing SoftwareAcrobat Distiller 7.0.5 (Windows)
Document Lastmod2008-09-04 16:02:08
Document TitleCisco Model DPH650 Wireless MoCA Acces Point
Document CreatorAcrobat PDFMaker 7.0.7 for Word
Document Author: DarkoK

Cisco Model DPH650 MoCA to
Wireless Adapter User Guide
In This Document
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
IMPORTANT SAFETY INSTRUCTIONS ...............................................................2
FCC Compliance .........................................................................................................7
Introducing the DPH650............................................................................................9
What's in the Carton? ...............................................................................................11
Front Panel Description ...........................................................................................12
Back Panel Description ............................................................................................13
System Requirements for the DPH650 ..................................................................14
Where Is the Best Location for the DPH650? ........................................................ 15
How Do I Mount the DPH650 on the Wall? .........................................................16
Connecting the DPH650 for Wireless Networks..................................................19
Configure the DPH650.............................................................................................20
Configure TCP/IP Settings for Your PC ...............................................................27
Having Difficulty? ....................................................................................................30
Tips for Improved Performance .............................................................................31
How Do I Renew the IP Address on My PC? .......................................................32
Notices........................................................................................................................ 33
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Notice to Installers
The servicing instructions in this notice are for use by qualified service personnel only. To reduce the
risk of electric shock, do not perform any servicing other than that contained in the operating
instructions, unless you are qualified to do so.
20070112 SysInstaller 820 English
Notice à l’attention des installateurs de réseaux câblés
Les instructions relatives aux interventions d’entretien, fournies dans la présente notice, s’adressent
exclusivement au personnel technique qualifié. Pour réduire les risques de chocs électriques, n’effectuer
aucune intervention autre que celles décrites dans le mode d'emploi et les instructions relatives au
fonctionnement, à moins que vous ne soyez qualifié pour ce faire.
20070112 SysInstaller 820 French
4027494 Rev A
IMPORTANT SAFETY INSTRUCTIONS
Mitteilung für CATV-Techniker
Die in dieser Mitteilung aufgeführten Wartungsanweisungen sind ausschließlich für qualifiziertes
Fachpersonal bestimmt. Um die Gefahr eines elektrischen Schlags zu reduzieren, sollten Sie keine
Wartungsarbeiten durchführen, die nicht ausdrücklich in der Bedienungsanleitung aufgeführt sind,
außer Sie sind zur Durchführung solcher Arbeiten qualifiziert.
20070112 SysInstaller 820 German
Aviso a los instaladores de sistemas CATV
Las instrucciones de reparación contenidas en el presente aviso son para uso exclusivo por parte de
personal de mantenimiento cualificado. Con el fin de reducir el riesgo de descarga eléctrica, no realice
ninguna otra operación de reparación distinta a las contenidas en las instrucciones de funcionamiento, a
menos que posea la cualificación necesaria para hacerlo.
20070112 SysInstaller 820 Spanish
4027494 Rev A
IMPORTANT SAFETY INSTRUCTIONS
Read These Instructions
Keep These Instructions
Heed All Warnings
Follow All Instructions
Power Source Warning
A label on this product indicates the correct power source for this product. Operate this product only
from an electrical outlet with the voltage and frequency indicated on the product label. If you are
uncertain of the type of power supply to your home or business, consult your service provider or your
local power company.
The AC inlet on the unit must remain accessible and operable at all times.
Ground the Product
WARNING: Avoid electric shock and fire hazard! Do not defeat the safety purpose of
the polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for replacement of the obsolete
outlet.
If this product connects to coaxial cable wiring, be sure the cable system is grounded (earthed).
Grounding provides some protection against voltage surges and built-up static charges.
Protect the Product from Lightning
For added protection, unplug this apparatus during lightning storms or when unused for long periods
of time. In addition to disconnecting the AC power from the wall outlet, disconnect the signal inputs.
Verify the Power Source from the On/Off Power Light
When the on/off power light is not illuminated, the apparatus may still be connected to the power
source. The light may go out when the apparatus is turned off, regardless of whether it is still plugged
into an AC power source.
Eliminate AC Mains Overloads
WARNING: Avoid electric shock and fire hazard! Do not overload AC mains, outlets,
extension cords, or integral convenience receptacles. For products that require battery
power or other power sources to operate them, refer to the operating instructions for
those products.
4027494 Rev A
IMPORTANT SAFETY INSTRUCTIONS
Prevent Power Cord Damage
Protect the power cord from being walked on or pinched, particularly at plugs, convenience
receptacles, and the point where the cord exits from the apparatus.
Provide Ventilation and Select a Location
ƒ
ƒ
ƒ
ƒ
ƒ
Remove all packaging material before applying power to the product.
ƒ
Do not install this apparatus in an enclosure, such as a bookcase or rack, unless the installation
provides proper ventilation.
ƒ
Do not place entertainment devices (such as VCRs or DVDs), lamps, books, vases with liquids, or
other objects on top of this product.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Do not place this apparatus on a bed, sofa, rug, or similar surface.
Do not place this apparatus on an unstable surface.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Protect from Exposure to Moisture and Foreign Objects
Do not use this apparatus near water.
WARNING: Avoid electric shock and fire hazard! Do not expose this product to
liquids, rain, or moisture.
WARNING: Avoid electric shock and fire hazard! Unplug this product before cleaning.
Clean only with a dry cloth. Do not use a liquid cleaner or an aerosol cleaner. Do not
use a magnetic/static cleaning device (dust remover) to clean this product.
WARNING: Avoid electric shock and fire hazard! Never push objects through the
openings in this product. Foreign objects can cause electrical shorts that can result in
electric shock or fire.
Accessories Warning
WARNING: Avoid electric shock and fire hazard! Only use attachments/accessories
specified by your service provider or the manufacturer.
Service Warnings
WARNING: Avoid electric shock! Do not open the cover of this product. Opening or
removing the cover may expose you to dangerous voltages. If you open the cover, your
warranty will be void. This product contains no user-serviceable parts. Refer all
servicing to qualified service personnel.
4027494 Rev A
IMPORTANT SAFETY INSTRUCTIONS
Servicing is required when the apparatus has been damaged in any way, such as a power-supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally, or has been dropped.
Check Product Safety
Upon completion of any service or repairs to this product, the service technician must perform safety
checks to determine that this product is in proper operating condition.
Protect the Product When Moving It
Always disconnect the power source when moving the apparatus or connecting or disconnecting
cables.
WARNING: Avoid personal injury and damage to this product! Use only with the cart,
stand, tripod, bracket, or table specified by the manufacturer or sold with the
apparatus. When a cart is used, use caution when moving the cart / apparatus
combination to avoid injury from tip-over.
20080402 Modem Cable w/out Battery
4027494 Rev A
FCC Compliance
FCC Compliance
United States FCC Compliance
This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against such interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy. If not installed and used in accordance with the
instructions, it may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment OFF and ON, the user is encouraged to try to correct the interference
by one or more of the following measures:
ƒ
ƒ
ƒ
Reorient or relocate the receiving antenna.
ƒ
Consult the cable company or an experienced radio/television technician for help.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Any changes or modifications not expressly approved by Scientific-Atlanta, Inc., could void
the user's authority to operate the equipment.
The information shown in the FCC Declaration of Conformity paragraph below is a
requirement of the FCC and is intended to supply you with information regarding the FCC
approval of this device. The phone numbers listed are for FCC-related questions only and not
intended for questions regarding the connection or operation for this device. Please contact your cable
service provider for any questions you may have regarding the operation or installation of this device.
Declaration of Conformity
This device complies with Part 15 of FCC
Rules. Operation is subject to the following two
conditions: 1) the device may not cause
harmful interference, and 2) the device must
accept any interference received, including
interference that may cause undesired
operation.
Model: D9476
Manufactured by:
Scientific-Atlanta, Inc.
5030 Sugarloaf Parkway
Lawrenceville, Georgia 30044 USA
Telephone: 770-236-1077
Canada EMI Regulation
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la class B est conforme à la norme NMB-003 du Canada.
20060628 FCC Standard
4027494 Rev A
FCC Compliance
This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
IMPORTANT NOTE: FCC and IC Radiation Exposure Statement:
This equipment complies with FCC and IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
The availability of some specific channels and/or operational frequency bands are
country dependent and are firmware programmed at the factory to match the
intended destination. The firmware setting is not accessible by the end user.
Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired
operation.
This device has been designed to operate with an antenna having a maximum gain
of 5 dBi. Antenna having a higher gain is strictly prohibited per regulations of
Industry Canada. The required antenna impedance is 50 ohms.
4027494 Rev A
Introducing the DPH650
Introducing the DPH650
The Cisco® Model DPH650 MoCA™ to Wireless Bridge (DPH650) provides
broadband service providers with a cost-effective solution for delivering high-speed
home networking over coaxial cable and advanced 802.11 wireless data services.
The DPH650 incorporates wired home networking technology based on the
Multimedia over Coax Alliance (MoCA) specifications for high speed data over coax
cable. MoCA allows the service provider to offer robust high speed data connections
within the home network for the reliable delivery of both video and voice services at
speeds up to 200 Mbps.
The DPH650 also features a Wi-Fi Multimedia (WMM) compliant 802.11g wireless
access point. When combined, MoCA and wireless networking technologies enable
the service provider to offer their subscribers a flexible home networking solution
for both wired and wireless applications.
This guide provides procedures and recommendations for placing, installing,
configuring, operating, and troubleshooting your DPH650.
Benefits and Features
Your new DPH650 offers the following additional outstanding benefits and features:
Wired and Wireless Home Networking
100 Mbps Ethernet, 235 Mbps MoCA
Designed to meet MoCA and IEEE 802.11g specifications
Connections
Bridged 10/100 Mbps Ethernet port with 802.11g wireless access point
Multimedia over Coax Alliance (MoCA)
Design and Function
Attractive compact design and versatile orientation to stand vertically, lie flat on
the desktop or shelf, or mount easily on a wall
LED status indicators on the front panel provide an informative and easy-tounderstand display that indicates the operational status and real-time data
transmission activity
Rugged electronic components for long-term reliability
4027494 Rev A
Introducing the DPH650
Management
Remote management and provisioning using web pages
Software and Documentation
CD-ROM containing user guide
10
4027494 Rev A
What's in the Carton?
What's in the Carton?
When you receive Wireless MoCA Access Point, you should check the equipment
and accessories to verify that each item is in the carton and that each item is
undamaged. The carton contains the following items:
Cisco Model DPH650
One power adapter with power cord
One CD-ROM containing the user guide
Note: Image may vary from actual product and specification.
If any of these items are missing or damaged, please contact your cable service
provider for assistance.
4027494 Rev A
11
Front Panel Description
Front Panel Description
The front panel of your DPH650 provides LED status indicators that indicate how
well and at what state the DPH650 is operating.
Note: Image may vary from actual product and specifications.
12
POWER - Illuminates solid green to indicate that power is being applied to the
DPH650
MoCA - Illuminates solid green to indicate that the MoCA function has been
enabled and working
WIRELESS - Illuminates solid green to indicate that the wireless function has
been enabled and working
ETHERNET - Illuminates solid green to indicate the Ethernet port is connected.
It blinks to indicate that data is transmitting
WIRELESS SETUP - Illuminates solid green to indicate that the wireless setup
method has been activated
4027494 Rev A
Back Panel Description
Back Panel Description
The following illustration describes the back panel components of the DPH650.
Note: Image may vary from actual product and specifications.
CABLE - F-Connector connects to an active cable signal from your service
provider.
WIRELESS SETUP - —Allows you to add new wireless devices to the wireless
network of the DPH650.
ETHERNET - Bridged 10/100 Mbps Ethernet port with 802.11g wireless access
point. It supports 10/100BASE-T connections.
RESET - Reset-to-Default Momentary Switch (Factory Reset)
Note: This button is for maintenance purposes only. Do not use unless told to do
so by your service provider.
POWER - Connects the Access Point to the 12 VDC output of the AC power
adapter that is provided with your Access Point. Only use the AC power adapter
and power cord that is provided with your Access Point.
CAUTION:
Avoid damage to your equipment. Only use the AC power adapter and power
cord that is provided with your AP.
4027494 Rev A
13
System Requirements for the DPH650
System Requirements for the DPH650
To ensure that the DPH650 operates efficiently for high-speed Internet service, verify
that all of the Internet devices on your system meet or exceed the following
minimum hardware and software requirements.
Important: You will also need an active cable input line and an Internet connection.
Minimum System Requirements for a PC
A PC with a Pentium MMX 133 processor or greater
32 MB of RAM
Web browsing software
CD-ROM drive
Minimum System Requirements for Macintosh
MAC OS 7.5 or later
32 MB of RAM
System Requirements for an Ethernet Connection
A PC with Microsoft Windows 95 operating system (or later) with TCP/IP
protocol installed, or an Apple Macintosh computer with TCP/IP protocol
installed
An active 10/100BASE-T Ethernet network interface card (NIC) installed
14
4027494 Rev A
Where Is the Best Location for the DPH650?
Where Is the Best Location for the DPH650?
The ideal location for the DPH650 is where it has access to outlets and other devices.
Consider these recommendations:
Position your PC and DPH650 so that they are located near an AC power outlet.
Position your PC and DPH650 so that they are located near an existing cable
input connection to eliminate the need for an additional cable outlet. There
should be plenty of room to guide the cables away from the DPH650 and the PC
without straining or crimping them.
Airflow around the DPH650 should not be restricted.
4027494 Rev A
15
How Do I Mount the DPH650 on the Wall?
How Do I Mount the DPH650 on the Wall?
Before You Begin
Before you begin, choose an appropriate mounting place. The wall can be made of
cement, wood, or drywall. The mounting location should be free of obstructions on
all sides, and the cables should be able to easily reach the DPH650 without strain.
Leave sufficient clearance between the bottom of the DPH650, and any flooring or
shelving underneath, to allow access to cabling. In addition, leave enough slack in all
cables so that the cable modem can be removed for any required maintenance
without disconnecting the cables. Also, verify that you have the following items:
Two wall anchors for #8 x 1-inch screws
Two #8 x 1-inch pan head sheet metal screws
Drill with a 3/16-in. wood or masonry bit
A copy of the wall-mounting illustrations shown on the following pages
Mounting Instructions
You can mount the DPH650 directly on a wall using two wall anchors, two screws,
and the mounting slots on the bottom of the modem. The modem can be mounted
vertically or horizontally. Mount the modem as shown in the following illustration.
16
4027494 Rev A
How Do I Mount the DPH650 on the Wall?
Location and Dimensions of the Wall-Mounting Slots
The following illustration shows the location and dimensions of the wall-mounting
slots on the bottom of the DPH650. Use the information on this page as a guide for
mounting the DPH650 to the wall.
Wall Mounting Instructions
Complete these steps to mount the DPH650 to the wall.
4027494 Rev A
Locate the place where you want to mount the DPH650 to the wall.
Hold the DPH650 level against the wall and at an angle so that the screw hole
mounting guides are facing up and against the wall.
Lay a pencil, pen, or other marking tool into each guide and mark the place on
the wall where you want to drill the mounting holes.
Using a drill with a 3/16-in bit, drill two holes at the same height and 4 inches
apart.
17
How Do I Mount the DPH650 on the Wall?
Are you mounting the DPH650 into a drywall or concrete surface where a
wooden stud is not available?
„ If yes, drive the anchor bolts into the wall and then go to step 6.
„ If no, go to step 6.
Install the mounting screws into the wall or the anchor bolts, as appropriate, and
leave a gap of about 1/4-in. between the screw head and the wall.
Verify that no cables or wires are connected to the DPH650.
Lift the DPH650 into position. Slip the large end of both mounting slots (located
on the back of the DPH650) over the mounting screws, and then slide the modem
down until the narrow end of the keyhole slot contacts the shaft of the screw.
Important: Verify that the mounting screws securely support the DPH650 before
you release the unit.
18
Connect the cables and wires to the DPH650.
4027494 Rev A
Connecting the DPH650 for Wireless Networks
Connecting the DPH650 for Wireless Networks
WARNING:
To avoid personal injury or damage to your equipment, follow these steps in
the exact order shown.
Power off your PC and unplug it from the power source.
Connect your PC to the ETHERNET port using the appropriate data cable.
Connect the active RF coaxial cable to the CABLE connector. Use an optional
cable signal splitter to add a TV, a DHCT or set-top converter, or a VCR.
Insert the AC power cord into the POWER connector on the back of the DPH650,
and then plug the cord into an AC power source.
Plug in and power on your networked devices including your PC. The DPH650
will then begin an automatic search to locate and sign on to the broadband data
network. This process may take up to 5 minutes. The DPH650 will be ready for
use when the ONLINE LED status indicator on the front panel stops blinking
and illuminates continuously.
The next step in setting up your wireless network is to configure your Internet
devices for Internet access by configuring the TCP/IP protocol. Go to How Do I
Configure TCP/IP Settings on My Computer? (see "Configure TCP/IP Settings
for Your PC" on page 27).
<>
4027494 Rev A
19
Configure the DPH650
Configure the DPH650
To configure the DPH650, you must first access the web configuration pages.
Accessing the Web Configuration Pages
To gain access to the web configuration pages, you must first configure you
computer's TCP/IP settings and change your computer's IP address to 192.168.1.x
(where X represents any number from 1 to 249). For assistance, configuring your
computer's TCP/IP settings, see Configure the TCP/IP Settings for Your PC (see
"Configure TCP/IP Settings for Your PC" on page 27). ). <>
Open the Web browser on your PC.
Type the following IP address and then select Go:
„ http://192.168.1.250
Type admin for both the username and password.
Note: This procedure is not required when the DPH650 obtains its IP address
automatically.
The System Page
This page gives the information about the device's model name, vendor and
software version.
The Setup Page
The Setup page will let you change or configure some of the settings for the DPH650.
LAN
You may setup the LAN interface's IP address here.
IP Address/Subnet Mask: Enter the LAN's IP address/Subnet Mask.
DHCP client: Select whether to enable/disable the LAN interface to accept
DHCP.
Gateway IP: Enter the default gateway used in the subnet.
Wireless Network
Radio On/Off: You may click on the button to turn on /off the wireless radio.
Network Mode: You may choose from the drop-down list to setup the operating
mode of the wireless network.
20
4027494 Rev A
Configure the DPH650
Network Name: Enter the wireless network's SSID (Service Set Identifier)in the
field. The DPH650 supports multiple SSIDs. You may enter up to 3 SSIDs in the
fields provided.
Broadcast Network Name(SSID): You may enable/disable the broadcasting of
your SSID. If you choose to disable the SSID, you will not see the DPH650 when
you use site survey to search available wireless networks.
BSSID: Identifies the Basic Service Set Identifier.
Frequency: Selects the channel for your wireless network.
Wireless Distribution System (WDS): You may extend your wireless networks
by connecting several networks.
Wireless Advanced
The following Wireless Advanced settings provide additional settings for your
wireless functionality.
Beacon Interval: Displays the time interval that the DPH650 uses to announce
itself to remote devices. Leave the Beacon Interval at 100ms for compliance with
most client cards. The Beacon Interval specifies how often packets are sent by
the DPH650 to synchronize a wireless network and its clients.
DTIM Interval: Delivery Traffic Indication Message (DTIM) displays the time
interval between broadcast/multicast transmissions. The DTIM interval is a
countdown informing the wireless clients of the next window for listening to
broadcast and multicast messages. When the DPH650 has buffered broadcast or
multicast messages for associated clients, it sends the next DTIM with a DTIM
Interval value. The DPH650 clients hear the beacons and awaken to receive the
broadcast and multicast messages. Leave the DTIM Interval at 3ms for
compliance with most clients cards.
Fragmentation Threshold: Sets the fragmentation threshold. The threshold
should be set equivalent to the maximum Ethernet frame size allowable on the
link including overhead (1536 bytes). Lesser settings can damage data
throughput as large frames could be fragmented or collisions could occur. The
factory default is 2346.
RTS Threshold: Determines at what packet size beyond which the ready to
send/clear to send (RTS/CTS) mechanism is invoked. The factory default is
2347.
4027494 Rev A
21
Configure the DPH650
Wifi-multimedia
You can enable Wi-Fi Multimedia (WMM) support to help improve the Quality of
Service (QoS) for your wireless traffic. We recommend that you leave the settings
unchanged if you are not sure with your configuration. Changing the values may
lead to unexpected blockages of traffic on your wireless LAN; the blockages may be
difficult to diagnose.
The WMM screen provides two separate menus to set up the parameters: one is for
the DPH650 and the other one is for Wireless Stations.
Typically, voice and video traffic types are delay-sensitive, but are tolerant of some
frame losses. On the other hand, data traffic type is delay-tolerable, but requires loss
free transmission. So you may adjust these parameters with regard to the
characteristics of these types of data to better manage your network flow.
AC (Access Category): Uses the following access categories, which are listed
from high to low:
VO: Voice
VI: Video
BE: Best Effort
BK: Background
AIFS (Arbitrary Interframe Space): An Interframe Space for different Access
Category
TXOP (Transmission Opportunity): WMM (Wireless Multimedia)
Transmission Opportunity: Defined by IEEE 802.11e, the TXOP is the interval of
time when a particular STA (station) has the right to initiate transmissions.
ACM (Admission Mandatory): Advertised in the EDCA parameter set element
to indicate the admission control is required for each of the ACs.
EDCA AP Parameters: The values of AIFS, CWmin, and CWmax are announced
by the DPH650 via beacon frames. The DPH650 can adapt these parameters
dynamically depending on the network conditions. Basically, the smaller AIFS
and CWmin, the shorter the channel access delay for the corresponding priority,
and hence the more capacity share for a given traffic condition. However, the
probability of collisions increases when operating with smaller CWmin.
22
4027494 Rev A
Configure the DPH650
EDCA STA Parameters: Each station maintains a Contention Window (CW),
which is used to select the random back off counter. The BC is determined as a
random integer drawn from a uniform distribution over the interval (0, CW). The
CW size is initially assigned CWmin, and increases when a transmission fails,
i.e., the transmitted data frame has not been acknowledged. After any
unsuccessful transmission attempt, another back off timer is performed, with an
upper bound of CWmax. This reduces the collision probability in case there are
multiple stations attempting to access the channel.
CW min: Should be smaller for delay-sensitive data
CW max: Should be smaller for delay-sensitive data
AIFSN: Should be smaller for delay-sensitive data
4027494 Rev A
23
Configure the DPH650
TXOPLimit: Allows multiple MAC frames consecutively as long as the whole
transmission time does not exceed the TXOP limit. For delay-sensitive date, keep
this limit larger.
ACM: Admission Mandatory; could be turned on to mandatory execution of the
contention control.
Wireless Security
You may setup the encryption method for your wireless network to better protect
you wireless networks.
Security Mode
Open: For this type of security mode, your wireless connection is unprotected. This
is strongly not recommended.
WEP: This security mode is defined in the original IEEE 802.11. This mode is not
recommended now due to its weak security protection. Users are urged to migrate to
WPA or WPA2.
Default Transmit Key: Select the key to be used for data encryption.
WEP Encryption: Select a level of WEP encryption, 64 bits (10 hex digits) or 128 bits
(26 hex digits). Key 1-4. If you want to manually enter WEP keys, then complete the
fields provided. Each WEP key can consist of the letters "A" through "F" and the
numbers "0" through "9". It should be 10 characters in length for 64-bit encryption or
26 characters in length for 128-bit encryption.
WPA-PSK: This is the WPA Algorithm. WPA offers you two encryption methods,
TKIP and AES for data encryption. Select the type of algorithm you want to use,
TKIP or AES. The default is TKIP.
WPA PreShared Key: Enter a PassPhrase Key of 8-63 characters.
WPA2-PSK: This is the WPA2 Algorithm. WPA2 offers you two encryption
methods, TKIP and AES for data encryption. Select the type of algorithm you want
to use, TKIP or AES. The default is TKIP.
WPA PreShared Key: Enter a PassPhrase Key of 8-63 characters.
802.1x: The 802.1x security method features a use in coordination with a RADIUS
server. This should only be used when a RADIUS server has already been setup in
the LAN.
IP Address: Enter the address of the RADIUS server.
RADIUS Port: Enter the port number of the RADIUS server. The default value is
1812.
Shared Secret: Enter the key shared between the router and the server.
24
4027494 Rev A
Configure the DPH650
Wireless WPS
The Wi-Fi Protected Setup(WPS) has aimed to ease the setup of the wireless
security. You may choose to use this method if your client adapter has also
supported WPS.
WPS: Allows wireless clients to be associated securely with the DPH650.
WPS mode: Allows the Personal Information Number (PIN) or Push Button
Configuration (PBC) method to be used to authorize a new client to the DPH650. The
PIN method requires the use to enter a client device PIN, obtained from a client
application web interface. The PBC method requires the user to push buttons on the
DPH650 and client devices within a two-minute period to connect them.
Management
Administrator Settings: Configures the administrator's account with the account
name and password.
NTP Settings
You may select this option to have the DPH650 get the time and date from the
Network Time Protocol (NTP) time server you specified below.
Time Zone: Sets the time zone where the DPH650 resides.
NTP Server: Identifies the IP address of the NTP server.
NTP Synchronization: Sets the number of seconds that the DPH650 should
synchronize with the NTP server.
DDNS Settings
Dynamic DNS Provider: The DDNS provider.
Account: The DDNS account name.
Password: The DDNS Password
DDNS: The DDNS hostname assigned by your DDNS service.
Upload Firmware
You may update your firmware with this function. To apply this firmware, click
Browse and select the firmware that you would like to load. Then click Apply.
Settings Management
Export Settings: Exports settings to be saved on your local disk.
Import Settings: Allows you to import firmware.
Load Factory Defaults: Replaces any settings that you have customized by loading
the device with the default (factory) settings.
4027494 Rev A
25
Configure the DPH650
Status
This page shows the status of the system.
System Info
System UP Time: The uptime of the device.
System Platform: The model number of the device.
Operation Mode: The device's operation mode.
Local Network
Local IP Address/Netmask: The LAN's IP Address/Netmask.
Statistics
Memory: The amount of memory used/left.
All Interfaces
Name: The name of the interface.
RX packets: The number of packets received by the specified interface.
RX bytes: The number of bytes received by the specified interface.
TX packets: The number of packets transmitted by the specified interface.
TX bytes: The number of bytes transmitted by the specified interface.
26
4027494 Rev A
Configure TCP/IP Settings for Your PC
Configure TCP/IP Settings for Your PC
To configure TCP/IP protocol, you need to have an Ethernet Network Interface Card
(NIC) with TCP/IP communications protocol installed on your system. TCP/IP is a
communications protocol used to access the Internet. This section contains
instructions for configuring TCP/IP on your Internet devices to operate with the
DPH650 in Microsoft Windows or Macintosh environments.
Configuring TCP/IP
TCP/IP protocol in a Microsoft Windows environment is different for each
operating system. Follow the appropriate instructions in this section for your
operating system.
Configuring TCP/IP on Windows 95, 98, 98SE, or ME Systems
1 Click Start, select Settings, and choose Control Panel.
Double-click the Network icon in the Control Panel window.
Read the list of installed network components under the Configuration tab to
verify that your PC contains the TCP/IP protocol/Ethernet adapter.
Is TCP/IP protocol listed in the installed network components list?
„ If yes, go to step 7.
„ If no, click Add, click Protocol, click Add, and then go to step 5.
Click Microsoft in the Manufacturers list.
Click TCP/IP in the Network Protocols list, and then click OK.
Click the TCP/IP Ethernet Adapter protocol, and then choose Properties.
Click the IP Address tab, and then select Obtain an IP address automatically.
Click the Gateway tab and verify that these fields are empty. If they are not
empty, highlight and delete all information from the fields.
10 Click the DNS Configuration tab, and then select Disable DNS.
11 Click OK.
12 Click OK when the system finishes copying the files, and then close all
networking windows.
13 Click YES to restart your computer when the System Settings Change dialog box
opens. The computer restarts. The TCP/IP protocol is now configured on your
PC, and your Ethernet devices are ready for use.
14 Try to access the Internet. If you cannot access the Internet, go to Having
Difficulty? (on page 30). If you still cannot access the Internet, contact your
service provider for further assistance.
4027494 Rev A
27
Configure TCP/IP Settings for Your PC
Configuring TCP/IP on Windows 2000 Systems
1 Click Start, select Settings, and choose Network and Dial-up Connections.
Double-click the Local Area Connection icon in the Network and Dial-up
Connections window.
Click Properties in the Local Area Connection Status window.
Click Internet Protocol (TCP/IP) in the Local Area Connection Properties
window, and then click Properties.
Select both Obtain an IP address automatically and Obtain DNS server address
automatically in the Internet Protocol (TCP/IP) Properties window, and then
click OK.
Click Yes to restart your computer when the Local Network window opens. The
computer restarts. The TCP/IP protocol is now configured on your PC, and your
Ethernet devices are ready for use.
Try to access the Internet. If you cannot access the Internet, go to Having
Difficulty? (on page 30). If you still cannot access the Internet, contact your
service provider for further assistance.
Configuring TCP/IP on Windows XP Systems
1 Click Start, and depending on your Start menu setup, choose one of the
following options:
28
„
If you are using the Windows XP Default Start Menu, select Connect to,
choose Show all connections, and then go to step 2.
„
If you are using the Windows XP Classic Start Menu, select Settings, choose
Network Connections, click Local Area Connection, and then go to step 3.
Double-click the Local Area Connection icon in the LAN or High-Speed Internet
section of the Network Connections window.
Click Properties in the Local Area Connection Status window.
Click Internet Protocol (TCP/IP), and then click Properties in the Local Area
Connection Properties window.
Select both Obtain an IP address automatically and Obtain DNS server address
automatically in the Internet Protocol (TCP/IP) Properties window, and then
click OK.
Click Yes to restart your computer when the Local Network window opens. The
computer restarts. The TCP/IP protocol is now configured on your PC, and your
Ethernet devices are ready for use.
Try to access the Internet. If you cannot access the Internet, go to Having
Difficulty? (on page 30). If you still cannot access the Internet, contact your
service provider for further assistance.
4027494 Rev A
Configure TCP/IP Settings for Your PC
Configuring TCP/IP on Macintosh Systems
1 Click the Apple icon in the upper-left corner of the Finder. Scroll down to
Control Panels, and then click TCP/IP.
Click Edit on the Finder at the top of the screen. Scroll down to the bottom of the
menu, and then click User Mode.
Click Advanced in the User Mode window, and then click OK.
Click the Up/Down selector arrows located to the right of the Connect Via
section of the TCP/IP window, and then click Using DHCP Server.
Click Options in the TCP/IP window, and then click Active in the TCP/IP
Options window.
Note: Make sure that the Load only when needed option is unchecked.
4027494 Rev A
Verify that the Use 802.3 option located in the upper-right corner of the TCP/IP
window is unchecked. If there is a check mark in the option, uncheck the option,
and then click Info in the lower-left corner.
Is there a Hardware Address listed in this window?
„
If yes, click OK. To close the TCP/IP Control Panel window, click File, and
then scroll down to click Close. You have completed this procedure.
„
If no, you must power off your Macintosh.
With the power off, simultaneously press and hold down the Command
(Apple), Option, P, and R keys on your keyboard. Keeping those keys pressed
down, power on your Macintosh but do not release these keys until you hear the
Apple chime at least three times, then release the keys and let the computer
restart.
When your computer fully reboots, repeat steps 1 through 7 to verify that all
TCP/IP settings are correct. If your computer still does not have a Hardware
Address, contact your authorized Apple dealer or Apple technical support center
for further assistance.
29
Having Difficulty?
Having Difficulty?
Frequently Asked Questions
Q. What if I don't subscribe to cable TV?
A. If cable TV is available in your area, data service may be made available with or
without subscribing to cable TV service. Contact your local cable service provider for
complete information on cable services, including high-speed Internet access.
Q. How do I arrange for installation?
A. Call your service provider to inquire about professional installation. A
professional installation ensures proper cable connection to the modem and to your
PC, and it ensures the proper configuration of all hardware and software settings.
Contact your cable telephony service provider for more information about
installation.
Q. How does the DPH650 connect to my computer?
A. The DPH650 connects to the Ethernet port or to the 10/100BASE-T Ethernet port
on your PC. If you want to use an Ethernet interface, Ethernet cards available from
your local PC or office supply retailer, or from your service provider. You may also
installed a wireless adaptor and connect to the DPH650 wirelessly.
Q. After my DPH650 is connected, how do I access the Internet?
A. You should have already installed cable modem/home gateway that is connected
to the internet. Your local service provider becomes your Internet Service Provider
(ISP). They offer a wide range of services including e-mail, chat, news, and
information services. Your service provider will provide the software you will need.
Q. Can I watch TV and surf the Internet at the same time?
A. Absolutely! If you subscribe to cable television service, you can watch TV and
use your Access Point at the same time by connecting your TV and your DPH650 to
the cable network using an optional cable signal splitter.
Q. How many clients can I have over the LAN?
A. You may have 253 wireless clients.
30
4027494 Rev A
Tips for Improved Performance
Tips for Improved Performance
Check and Correct
If your DPH650 does not perform as expected, the following tips may help. If you
need further assistance, contact the technical assistance.
Verify that the plug to your DPH650 AC power is properly inserted into an
electrical outlet.
Verify that your DPH650 AC power cord is not plugged into an electrical outlet
that is controlled by a wall switch. If a wall switch controls the electrical outlet,
make sure the switch is in the ON position.
Verify that the ONLINE LED status indicator on the front panel of the DPH650 is
illuminated.
Verify that your cable service is active and that it supports two-way service.
Verify that all cables are properly connected, and that you are using the correct
cables.
Verify that your TCP/IP is properly installed and configured if you are using the
Ethernet connection.
If you are using a cable signal splitter so that you can connect the DPH650 to
other devices, remove the splitter and reconnect the cables so that the AP is
connected directly to the cable input. If the DPH650 now functions properly, the
cable signal splitter may be defective and may need to be replaced.
For best performance over an Ethernet connection, your PC should be equipped
with a 10/100BASE-T network interface card.
4027494 Rev A
31
How Do I Renew the IP Address on My PC?
How Do I Renew the IP Address on My PC?
If your PC cannot access the Internet after the DPH650 is online, it is possible that
your PC did not renew its IP address. Follow the appropriate instructions in this
section for your operating system to renew the IP address on your PC.
Renewing the IP address on Windows 95, 98, 98SE, and ME Systems
Click Start, and then click Run to open the Run window.
Type winipcfg in the Open field, and click OK to execute the winipcfg
command. The IP Configuration window opens.
Click the down arrow to the right of the top field, and select the Ethernet adapter
that is installed on your PC. The IP Configuration window displays the Ethernet
adapter information.
Click Release, and then click Renew. The IP Configuration window displays a
new IP address.
Click OK to close the IP Configuration window, you have completed this
procedure.
Note: If you cannot access the Internet, contact your service provider for further
assistance.
Renewing the IP Address on Windows NT, 2000, or XP Systems
Click Start, and then click Run. The Run window opens.
Type cmd in the Open field and click OK. A window with a command prompt
opens.
Type ipconfig/release at the C:/ prompt and press Enter. The system releases
the IP address.
Type ipconfig/renew at the C:/ prompt and press Enter. The system displays a
new IP address.
Click the X in the upper-right corner of the window to close the Command
Prompt window. You have completed this procedure.
Note: If you cannot access the Internet, contact your service provider for further
assistance.
32
4027494 Rev A
Notices
Notices
Trademarks
Cisco, Cisco Systems, the Cisco logo, the Cisco Systems logo, Scientific Atlanta, and
SciCare are registered trademarks or trademarks of Cisco Systems, Inc. and/or its
affiliates in the U.S. and certain other countries.
DOCSIS is a registered trademark of Cable Television Laboratories, Inc.
EuroDOCSIS is a trademark of Cable Television Laboratories, Inc.
All other trademarks mentioned in this document are the property of their respective owners.
Disclaimer
Cisco Systems, Inc. assumes no responsibility for errors or omissions that may
appear in this guide. We reserve the right to change this guide at any time without
notice.
Documentation Copyright Notice
© 2008 Cisco Systems, Inc. All rights reserved
Printed in the United States of America
Information in this document is subject to change without notice. No part of this
document may be reproduced in any form without the express written permission of
Cisco Systems, Inc.
Software and Firmware Use
The software described in this document is protected by copyright law and
furnished to you under a license agreement. You may only use or copy this software
in accordance with the terms of your license agreement.
The firmware in this equipment is protected by copyright law. You may only use the
firmware in the equipment in which it is provided. Any reproduction or distribution
of this firmware, or any portion of it, without our express written consent is
prohibited.
4027494 Rev A
33
For Information
For Information
If You Have Questions
If you have technical questions, call SciCare™ Services for assistance. Follow the
menu options to speak with a service engineer. Use the following table to find the
center in your area.
Region
Assistance Centers
North America Atlanta, Georgia
South America United States
Central
America
Telephone and Fax Numbers
Technical Support
For Digital Broadband Delivery System products only, call:
ƒ Toll-free: 1-800-283-2636
ƒ Local: 770-236-2200
ƒ Fax: 770-236-2488
For all products other than Digital Broadband Delivery
System, call:
ƒ Toll-free: 1-800-722-2009
ƒ Local: 678-277-1120
ƒ Fax: 770-236-2306
Customer Service
ƒ Toll-free: 1-800-722-2009
ƒ Local: 678-277-1120
ƒ Fax: 770-236-5477
Europe
England
Telephone: +44 (0) 8708-325-420
Fax: +44 (0) 8708-325-444
Asia-Pacific
Hong Kong, China
Telephone: 011-852-2588-4745
Fax: 011-852-2588-3139
Australia
Sydney, Australia
Telephone: 011-61-2-8446-5374
Fax: 011-61-2-8446-8015
Japan
Tokyo, Japan
Telephone: 011-81-3-5322-2067
Fax: 011-81-3-5322-1311
34
4027494 Rev A
Scientific Atlanta, A Cisco Company
5030 Sugarloaf Parkway, Box 465447
Lawrenceville, GA 30042
678.277.1000
www.scientificatlanta.com
Cisco, Cisco Systems, the Cisco logo, the Cisco Systems logo, Scientific Atlanta, and
SciCare are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in
the U.S. and certain other countries.
All other trademarks mentioned in this document are the property of their respective owners.
Product and service availability are subject to change without notice.
© 2008 Cisco Systems, Inc. All rights reserved.
Printed in United States of America
August 2008
Part Number 4027494 Rev A

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2008:08:27 11:02:52-04:00
Creator Tool                    : Acrobat PDFMaker 7.0.7 for Word
Modify Date                     : 2008:09:04 16:02:08+08:00
Metadata Date                   : 2008:09:04 16:02:08+08:00
Format                          : application/pdf
Title                           : Cisco Model DPH650 Wireless MoCA Acces Point
Creator                         : DarkoK
Description                     : User Guide
Document ID                     : uuid:18895afa-9b0d-4f03-9c15-c5c29dff34ce
Instance ID                     : uuid:8210144f-7c51-4b82-8bb8-58c5f912ba25
Company                         : AuthorIT Software Corporation Ltd.
Comments                        : Copyright © 1996-2002 AuthorIT Software Corporation Ltd., all rights reserved.
Page Count                      : 36
Page Layout                     : OneColumn
Subject                         : User Guide
Author                          : DarkoK
EXIF Metadata provided by EXIF.tools
FCC ID Filing: MXF-A970423G

Navigation menu