GemTek Technology ADV980114G DDR2201 v1 ADSL2+ Residential Gateway User Manual Manual 1
Gemtek Technology Co., Ltd. DDR2201 v1 ADSL2+ Residential Gateway Manual 1
Contents
- 1. Manual 1
- 2. Manual 2
- 3. Manual 3
Manual 1
3-6-2009 Draft 4030765 Rev 01 DDR2201 Series Residential Gateway Installation and Operation Guide 3-6-2009 Draft 3-6-2009 Draft Please Read Important Please read this entire guide. If this guide provides installation or operation instructions, give particular attention to all safety statements included in this guide. 3-6-2009 Draft Notices Trademark Acknowledgments Scientific Atlanta is a registered trademark of Scientific-Atlanta, Inc. Cisco, the Cisco logo, and Cisco Systems are trademarks or registered trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. All other trademarks shown are trademarks of their respective owners. Publication Disclaimer Cisco Systems, Inc. assumes no responsibility for errors or omissions that may appear in this publication. We reserve the right to change this publication at any time without notice. This document is not to be construed as conferring by implication, estoppel, or otherwise any license or right under any copyright or patent, whether or not the use of any information in this document employs an invention claimed in any existing or later issued patent. Copyright © 2009 Cisco Systems, Inc. All rights reserved. Printed in the United States of America. Information in this publication is subject to change without notice. No part of this publication may be reproduced or transmitted in any form, by photocopy, microfilm, xerography, or any other means, or incorporated into any information retrieval system, electronic or mechanical, for any purpose, without the express permission of Cisco Systems, Inc. 3-6-2009 Draft Contents IMPORTANT SAFETY INSTRUCTIONS vii FCC Compliance xiii About This Guide xvii Chapter 1 Introducing the DDR2201 Series Residential Gateway 1 Benefits and Features .............................................................................................................. 2 What's On the Front Panel? .................................................................................................... 4 What's On the Back Panel? ..................................................................................................... 6 Chapter 2 Installing the Residential Gateway Mounting the Residential Gateway Vertically..................................................................... 8 Mounting the Residential Gateway to the Wall .................................................................. 9 Connecting Your Computer to the Residential Gateway................................................. 10 Connecting the DSL Interface .............................................................................................. 12 Chapter 3 Configuration and Operation 15 Logging In to the Residential Gateway .............................................................................. 17 System Summary ................................................................................................................... 18 Setting Up Your System with the Setup Wizard ............................................................... 19 Setting System Date and Time ............................................................................................. 24 Setting Password.................................................................................................................... 25 DHCP Leases .......................................................................................................................... 26 WAN Information.................................................................................................................. 27 Route Information.................................................................................................................. 28 ARP Information .................................................................................................................... 29 CPU Information.................................................................................................................... 30 Memory Information ............................................................................................................. 31 LAN Statistics ......................................................................................................................... 32 WAN Statistics ....................................................................................................................... 33 ATM Statistics......................................................................................................................... 34 Tools Update Software.......................................................................................................... 35 Updating Software................................................................................................................. 36 Settings Backup ...................................................................................................................... 38 Update Settings ...................................................................................................................... 40 4030765 Rev 01 iii 3-6-2009 Draft Contents Restore Default Settings........................................................................................................ 42 Saving the Configuration for the Residential Gateway.................................................... 44 Time Settings .......................................................................................................................... 46 Access Control Services ........................................................................................................ 49 IP Access Control ................................................................................................................... 51 Password Access to the Residential Gateway.................................................................... 54 Http Server Port ..................................................................................................................... 57 System Log Configuration.................................................................................................... 59 System Logs ............................................................................................................................ 64 Print Server Settings .............................................................................................................. 66 Clone MAC Addresses.......................................................................................................... 69 Voice SIP Basic Configuration.............................................................................................. 72 Voice SIP Advanced Configuration .................................................................................... 76 USB File List............................................................................................................................ 79 Chapter 4 DSL Configuration 81 DSL Summary ........................................................................................................................ 82 DSL Statistics .......................................................................................................................... 83 DSL Diagnostics ..................................................................................................................... 85 DSL Settings............................................................................................................................ 87 ADSL Tone Settings............................................................................................................... 89 DSL Advanced Settings ........................................................................................................ 91 Chapter 5 Home Network Configuration 93 Client Summary ..................................................................................................................... 94 WAN Quick Setup ................................................................................................................. 97 Set Top Box Quick Setup..................................................................................................... 101 LAN Setup ............................................................................................................................ 103 Wireless Summary............................................................................................................... 106 Wireless Basic ....................................................................................................................... 107 Wireless Security.................................................................................................................. 111 Wireless MAC Filtering ...................................................................................................... 116 Wireless Bridge .................................................................................................................... 120 Wireless Station List ............................................................................................................ 121 HPNA Information .............................................................................................................. 123 HPNA Statistics Information ............................................................................................. 125 Home Monitoring ................................................................................................................ 126 Chapter 6 Security Configuration 127 MAC Filtering Setup ........................................................................................................... 128 Incoming IP Filtering........................................................................................................... 134 Outgoing IP Filtering........................................................................................................... 141 Parental Control Setup - Filtering Function ..................................................................... 146 iv 4030765 Rev 01 3-6-2009 Draft Contents URL Filtering Function ....................................................................................................... 151 Stateful Packet Inspection................................................................................................... 156 Local Certificates.................................................................................................................. 158 Trusted CA Certificates....................................................................................................... 163 Chapter 7 Advanced Configuration 167 Upstream Quality of Service .............................................................................................. 168 Remote Management........................................................................................................... 171 Port Mapping........................................................................................................................ 173 Creating Certificates ............................................................................................................ 176 Virtual Servers Setup........................................................................................................... 178 Port Triggering Setup .......................................................................................................... 182 DMZ Host Setup .................................................................................................................. 186 DNS Server Configuration.................................................................................................. 187 Dynamic DNS....................................................................................................................... 188 Default Gateway Routing ................................................................................................... 191 Internet Group Management Protocol.............................................................................. 193 IPSec Settings........................................................................................................................ 194 Chapter 8 Customer Information 197 Customer Support................................................................................................................ 198 Return Products for Repair................................................................................................. 200 4030765 Rev 01 3-6-2009 Draft IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS The servicing instructions in this notice are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions, unless you are qualified to do so. Notice à l’attention des installateurs de réseaux câblés Les instructions relatives aux interventions d’entretien, fournies dans la présente notice, s’adressent exclusivement au personnel technique qualifié. Pour réduire les risques de chocs électriques, n’effectuer aucune intervention autre que celles décrites dans le mode d'emploi et les instructions relatives au fonctionnement, à moins que vous ne soyez qualifié pour ce faire. 4030765 Rev 01 vii 3-6-2009 Draft IMPORTANT SAFETY INSTRUCTIONS Mitteilung für CATV-Techniker Die in dieser Mitteilung aufgeführten Wartungsanweisungen sind ausschließlich für qualifiziertes Fachpersonal bestimmt. Um die Gefahr eines elektrischen Schlags zu reduzieren, sollten Sie keine Wartungsarbeiten durchführen, die nicht ausdrücklich in der Bedienungsanleitung aufgeführt sind, außer Sie sind zur Durchführung solcher Arbeiten qualifiziert. Aviso a los instaladores de sistemas CATV Las instrucciones de reparación contenidas en el presente aviso son para uso exclusivo por parte de personal de mantenimiento cualificado. Con el fin de reducir el riesgo de descarga eléctrica, no realice ninguna otra operación de reparación distinta a las contenidas en las instrucciones de funcionamiento, a menos que posea la cualificación necesaria para hacerlo. 20080814_Installer800_Intl viii 4030765 Rev 01 3-6-2009 Draft IMPORTANT SAFETY INSTRUCTIONS U.S. Patents A patent notice is affixed to this product. In addition, the product may also be covered by one or more of the following patents: 4,498,169, 4,692,919, 4,748,667; 4,829,569; 4,866,770; 4,885,775; 4,888,799; 4,890,319; 4,922,456; 4,922,532; 4,924,498; 4,965,534; 4,991,011; 5,003,384; 5,012,510; 5,029,207; 5,045,816; 5,053,883; 5,054,071; 5,058,160; 5,142,575; 5,142,690; 5,146,526; 5,155,590; 5,214,390; 5,225,902; 5,225,925; 5,235,619; 5,237,610; 5,239,540; 5,241,610; 5,247,364; 5,255,086; 5,257,403; 5,267,071; 5,270,809; 5,271,041; 5,272,752; 5,282,028; 5,285,497; 5,287,351; 5,301,028; 5,309,514; 5,317,391; 5,319,709; 5,341,425; 5,347,388; 5,347,389; 5,357,276; 5,359,601; 5,361,156; 5,367,571; 5,379,141; 5,379,145; 5,381,481; 5,390,337; 5,400,401; 5,406,558; 5,418,782; 5,420,866; 5,420,923; 5,425,101; 5,428,404; 5,430,568; 5,434,610; 5,436,749; 5,438,370; 5,440,632; 5,442,472; 5,455,570; 5,457,701; 5,471,492; 5,477,199; 5,477,262; 5,477,282 5,477,370; 5,481,389; 5,481,542; 5,485,221; 5,493,339; 5,497,187; 5,500,758; 5,502,499; 5,506,904; 5,519,780; 5,539,822; 5,550,825; 5,579,055; 5,579,057; 5,583,562; 5,592,551; 5,596,606; 5,600,378; 5,602,933; 5,640,388; 5,657,414; 5,675,575; 5,684,876; 5,715,515; 5,724,525; 5,734,822; 5,740,300; 5,742,677; 5,754,940; 5,757,416; 5,771,064; 5,774,859; 5,825,829; 5,826,167; 5,850,305; 5,854,703; 5,870,474; 5,892,607; 5,920,626; 5,923,755; 5,930,024; 5,930,515; 5,937,067; 5,963,352; 5,966,163; 5,982,424; 5,991,139; 5,999,207; 6,005,631; 6,005,938; 6,016,163; 6,028,941; 6,029,046; 6,052,384; 6,055,244; 6,072,532; 6,105,134; 6,148,039; 6,157,719; 6,188,729; 6,195,389; 6,212,278; 6,215,530; 6,219,358; 6,240,103; 6,243,145; 6,246,767; 6,252,964; 6,272,226; 6,292,081; 6,292,568; 6,320,131; 6,374,275; 6,405,239; 6,411,602; 6,417,949; 6,424,714; 6,424,717; 6,433,906; 6,438,139; 6,463,586; 6,467,091; 6,476,878; 6,493,876; 6,510,519; 6,516,002; 6,516,412; 6,526,508; 6,538,595; 6,546,013; 6,560,340; 6,567,118; 6,570,888; 6,622,308; 6,629,227; 6,664,984; 6,667,994; 6,671,879; 6,674,967; 6,678,891; 6,714,598; 6,721,352; 6,721,956; 6,725,459; 6,738,982; 6,744,892; 6,744,967; 6,751,271; 6,760,918; 6,795,972; 6,802,077; 6,804,708; 6,811,447; 6,817,028; 6,822,972; 6,823,385; 6,832,386; 6,845,106; 6,868,473; 6,874,075; 6,889,191; 6,909,471; 6,917,622; 6,917,628; 6,922,412; 6,927,806; 6,928,656; 6,931,058; 6,937,729; 6,969,279; 6,971,008; 6,971,121; 6,978,310; 6,986,156; 6,988,900; 6,996,838; 7,010,801; 7,053,960; 7,065,213; 7,069,578; 7,069572; D348065; D354959; D359737; D363932; D390217; D434753; D507240; D507535; D513407; D516518; RE36368; RE36988 20070417 Patents IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A groundingtype plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 4030765 Rev 01 ix 3-6-2009 Draft IMPORTANT SAFETY INSTRUCTIONS 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as a power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Power Source Warning A label on this product indicates the correct power source for this product. Operate this product only from an electrical outlet with the voltage and frequency indicated on the product label. If you are uncertain of the type of power supply to your home or business, consult your service provider or your local power company. The AC inlet on the unit must remain accessible and operable at all times. Ground the Product WARNING: Avoid electric shock and fire hazard! If this product connects to coaxial cable wiring, be sure the cable system is grounded (earthed). Grounding provides some protection against voltage surges and built-up static charges. WARNING: Avoid electric shock and fire hazard! Do not locate an outside antenna system in the vicinity of overhead power lines or power circuits. Touching power lines or circuits might be fatal. Protect the Product from Lightning In addition to disconnecting the AC power from the wall outlet, disconnect the signal inputs. Verify the Power Source from the On/Off Power Light When the on/off power light is not illuminated, the apparatus may still be connected to the power source. The light may go out when the apparatus is turned off, regardless of whether it is still plugged into an AC power source. Eliminate AC Mains Overloads WARNING: Avoid electric shock and fire hazard! Do not overload AC mains, outlets, extension cords, or integral convenience receptacles. For products that require battery power or other power sources to operate them, refer to the operating instructions for those products. 4030765 Rev 01 3-6-2009 Draft IMPORTANT SAFETY INSTRUCTIONS Provide Ventilation and Select a Location Remove all packaging material before applying power to the product. Do not place entertainment devices (such as VCRs or DVDs), lamps, books, vases with liquids, or other objects on top of this product. Do not block ventilation openings. Do not place this apparatus on a bed, sofa, rug, or similar surface. Do not place this apparatus on an unstable surface. Do not install this apparatus in an enclosure, such as a bookcase or rack, unless the installation provides proper ventilation. Protect from Exposure to Moisture and Foreign Objects WARNING: Avoid electric shock and fire hazard! Do not expose this product to liquids, rain, or moisture. Do not expose this product to dripping or splashing liquids, rain, or moisture. Objects filled with liquids, such as vases, should not be placed on this apparatus. WARNING: Avoid electric shock and fire hazard! Unplug this product before cleaning. Do not use a liquid cleaner or an aerosol cleaner. Do not use a magnetic/static cleaning device (dust remover) to clean this product. WARNING: Avoid electric shock and fire hazard! Never push objects through the openings in this product. Foreign objects can cause electrical shorts that can result in electric shock or fire. Service Warnings WARNING: Avoid electric shock! Do not open the cover of this product. Opening or removing the cover may expose you to dangerous voltages. If you open the cover, your warranty will be void. This product contains no user-serviceable parts. Check Product Safety Upon completion of any service or repairs to this product, the service technician must perform safety checks to determine that this product is in proper operating condition. Protect the Product When Moving It Always disconnect the power source when moving the apparatus or connecting or disconnecting cables. Telephone Equipment Notice When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric stock and injury to persons, including the following: 1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry 4030765 Rev 01 xi 3-6-2009 Draft IMPORTANT SAFETY INSTRUCTIONS tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. SAVE THESE INSTRUCTIONS 20081112_Modem DSL_Safety xii 4030765 Rev 01 3-6-2009 Draft FCC Compliance FCC Compliance United States FCC Compliance This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against such interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Consult the service provider or an experienced radio/television technician for help. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Any changes or modifications not expressly approved by Cisco Systems, Inc., could void the user's authority to operate the equipment. The information shown in the FCC Declaration of Conformity paragraph below is a requirement of the FCC and is intended to supply you with information regarding the FCC approval of this device. The phone numbers listed are for FCC-related questions only and not intended for questions regarding the connection or operation for this device. Please contact your service provider for any questions you may have regarding the operation or installation of this device. Declaration of Conformity This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: 1) the device may not cause harmful interference, and 2) the device must accept any interference received, including interference that may cause undesired operation. DDR2201 Residential Gateway Model: DDR2201 Manufactured by: Cisco Systems, Inc. 5030 Sugarloaf Parkway Lawrenceville, Georgia 30044 USA Telephone: 770-236-1077 Canada EMI Regulation This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la class B est conforme à la norme NMB-003 du Canada. 4030765 Rev 01 xiii 3-6-2009 Draft FCC Compliance FCC Part 68 The Federal Communications Commission (FCC) of the United States restricts specific uses of modems, and places registration responsibilities on both the manufacturer and the individual user. The modem may not be connected to a party line or to a coin-operated telephone. Notification to the telephone company is no longer required prior to connecting registered equipment, but upon request from the telephone company, the user shall tell the telephone company which line the equipment is connected to as well as the registration number and ringer equivalence number of the registered protective circuitry. FCC information is printed on a label on the bottom of the modem. IC (Industry Canada) Notice Notice: The Industry Canada (formerly Canadian Department of Communications) label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational, and safety requirements. The department does not guarantee the equipment will operate to the user's satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. In some cases, the company's inside wiring associated with a single-line individual service may be extended by means of a certified connector assembly (telephone extension cord). The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. CAUTION: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate. Radiation Exposure Statements Note: This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 7.9 inches (20 cm) between the radiator and your body. US This system has been evaluated for RF exposure for humans in reference to ANSI C 95.1 (American National Standards Institute) limits. The evaluation was based on evaluation per ANI C 95.1 and FCC OET Bulletin 65C rev 01.01. The minimum separation distance from the antenna to general bystander is 7.9 inches (20 cm) to maintain compliance. xiv 4030765 Rev 01 3-6-2009 Draft FCC Compliance Canada This system has been evaluated for RF exposure for humans in reference to ANSI C 95.1 limits. The evaluation was based on evaluation per RSS-102 Rev 2. The minimum separation distance from the antenna to general bystander is 7.9 inches (20 cm) to maintain compliance. EU This system has been evaluated for RF exposure for humans in reference to the ICNIRP (International Commission on Non-Ionizing Radiation Protection) limits. The evaluation was based on the EN 50385 Product Standard to Demonstrate Compliance of Radio Base Stations and Fixed Terminals for Wireless Telecommunications Systems with basic restrictions or reference levels related to Human Exposure to Radio Frequency Electromagnetic Fields from 300 MHz to 40 GHz. The minimum separation distance from the antenna to general bystander is 20 cm (7.9 inches). Australia This system has been evaluated for RF exposure for humans as referenced in the Australian Radiation Protection standard and has been evaluated to the ICNIRP (International Commission on Non-Ionizing Radiation Protection) limits. The minimum separation distance from the antenna to general bystander is 20 cm (7.9 inches). 20081121 FCC DSL_Dom and Intl 4030765 Rev 01 xv 3-6-2009 Draft FCC Compliance FCC REQUIREMENTS This equipment complies with Part 68 of FCC Rules and the requirements adopted by the ACTA.. On the bass unit of this equipment is a label that contains, among other information, a product identifier in the format US: GEMDL01BDDR2201V1. If requested, this number must be provided to the telephone company. The REN is useful to determine the quantity of devices you may connect to your telephone line and still have those devices ring when your telephone number is called. In most, but not all areas, the sum of the REN of all devices connected to one line should not exceed five (5.0). To be certain of the number of devices you may connect to your line, as determined by the REN, you should contact your local telephone company to determine the maximum REN for your calling area. If your equipment causes harm to the telephone network, the telephone company may discontinue your service temporarily. If possible, they will notify you in advance. If advance notice is not practical, you will be notified as soon as possible. You will be informed of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operations or procedures that could affect the proper functioning of your equipment. If they do, you will be notified in advance to give you an opportunity to maintain uninterrupted telephone service. If you experience trouble with this telephone equipment, please contact the following address and phone number for information on obtaining service or repairs: The telephone company may ask that you disconnect this equipment from the network until the problem has been corrected or until you are sure that the equipment is not malfunctioning. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs. xiv 4030765 Rev 01 3-6-2009 Draft About This Guide About This Guide Introduction This installation and operation guide applies to the DDR2201 series residential gateway. The DDR2201 series residential gateway connects to the DSL network in your home to deliver data, video, voice, and wired (Ethernet) or wireless gateway capabilities all from one device. Use this guide to install the residential gateway in your home. Purpose This document provides the information you need to install and operate the DDR2201 series residential gateway. Audience This guide is written for two audiences. Subscribers who have purchased a residential gateway and want to experience high-speed Internet and high-quality digital telephone service can use this guide for background information and basic operation. This guide is also written for the the service provider's installers who initially set up and configure residential gateway in the subscriber's home. Most subscribers will not want to use the more advanced functionality, and future releases of this software will prevent subscriber access to these screens. Document Version This is the first formal release of this document. 4030765 Rev 01 xvii 3-6-2009 Draft 1 Chapter 1 Introducing the DDR2201 Series Residential Gateway Introduction Imagine walking through your home and accessing the Internet from nearly any room. The DDR2201 series residential gateway connects to the DSL line in your home and to your home network to deliver data, video, voice, and wired (Ethernet) or wireless gateway capabilities all from one device. You can use your residential gateway to connect to a variety of devices in the home or small office. The residential gateway supports high-speed data access, VoIP services, and features that support Internet Protocol TV (IPTV) deployment. Use this chapter to learn about your residential gateway. In This Chapter 4030765 Rev 01 Benefits and Features ............................................................................. 2 What's On the Front Panel? ................................................................... 4 What's On the Back Panel? .................................................................... 6 3-6-2009 Draft Chapter 1 Introducing the DDR2201 Series Residential Gateway Benefits and Features Your residential gateway offers the following benefits and features: Full routing functionality. The gateway router provides broadband transfer speeds available between your home network and the service provider's network for multi-user sharing. The high-performance router distributes data seamlessly to all devices in the network without a noticeable effect to performance or speed. True firewall capability. The gateway firewall includes both standard NAT/PAT security and Stateful Packet inspection to defend against external attacks. High-quality data, voice, and IPTV services. The gateway combines an ADSL2+ bonded modem, 4-port Ethernet switch, HPNA 3.0 bridge and router functionality with optional VoIP and WiFi into one integrated platform. Compact design. The gateway is compact enough to sit on a desktop and versatile enough to be wall mounted in an out of the way location. The residential gateway can also stand vertically. Flexible networking. The gateway combines a variety of home networking technologies in one box: Ethernet, USB, 802.11g wireless, and HPNA. Ethernet. Ethernet is a network standard for data transmission using either coaxial or twisted pair cable over a LAN (local area network). The information can be transmitted at speeds of 10 to 100 Mbps. If the home or office is wired for Ethernet, use one of the four LAN interfaces on the gateway to create a broadband network. USB. The USB port allows you to directly connect a computer or other network capable device. 802.11g Wireless. The gateway includes an integrated wireless access point that allows you to roam wirelessly throughout your home or office. With the high-power wireless technology of the DDR2201, wireless "coldspots" are virtually eliminated in the home. HPNA. The HPNA interface allows you to easily share digital services throughout the home using the existing coaxial cable to distribute content such as video, music, and games. HPNA offers the following benefits: Multi-room DVR. Subscribers can record and share digital services simultaneously in every room. Multi-room gaming. Subscribers can access games from various locations in the home and play simultaneously. PC to TV. Subscribers can access data and video services over the HPNA coaxial network throughout the home. 4030765 Rev 01 3-6-2009 Draft Benefits and Features ADSL2+. Asymmetric Digital Subscriber Line (ADSL) provides high-access transmission speeds for delivery of video, voice, and data services to homes over ordinary copper telephone wire. 4030765 Rev 01 3-6-2009 Draft Chapter 1 Introducing the DDR2201 Series Residential Gateway What's On the Front Panel? The front panel of your residential gateway provides LED status indicators that indicate the operational state of your gateway. Refer to the following diagram for a description of the front panel. wifi-sec—Allows you to automatically configure the wireless device in the home. The WIRELESS SECURITY SETUP LED shows whether automatic wireless security is on or off POWER—Illuminates solid green to indicate that AC power is being applied to the residential gateway LAN1 - LAN4—Illuminates solid green to indicate that an Ethernet carrier is present and blinks to indicate that Ethernet data is being transferred between the PC and the residential gateway USB/PC—Illuminates solid green to indicate that a USB carrier is present and blinks to indicate that USB data is being transferred between the PC and the residential gateway USB/DEVICE—Illuminates solid green to indicate that a USB carrier is present and blinks to indicate that USB data is being transferred between the connected USB device and the residential gateway WIRELESS—Illuminates solid green when the wireless access point is enabled and operational and blinks to indicate that wireless data is being transferred between the PC and the residential gateway. The LED is off when the wireless access point is disabled by the user HPNA—Illuminates solid when linked to another HPNA device and blinks when HPNA activity occurs TEL 1 and TEL 2—TEL 1 illuminates solid green when telephony service is enabled. Blinks when line 1 is in use. TEL2 illuminates solid green when telephony service is enabled. Blinks when line 2 is in use DSL/WAN—Indicates whether a DSL signal is acquired (or trained). The LED indicators mean the following status: Off. Not trained. Blinking. In training. Solid. Trained. 4030765 Rev 01 3-6-2009 Draft What's On the Front Panel? 10 INTERNET—Indicates wide area network (WAN) traffic. The LED indicators mean the following status: 4030765 Rev 01 Solid. IP is connected. Blinking. WAN interface has activity. Off. No Internet connection. 3-6-2009 Draft Chapter 1 Introducing the DDR2201 Series Residential Gateway What's On the Back Panel? Refer to the following diagram for a description of the back panel components. Important! Do not connect your PC to both the Ethernet and USB ports at the same time. Your modem will not function properly if both the Ethernet and USB ports are connected to your PC at the same time. POWER—Connects the residential gateway to the AC power plug that is provided with your residential gateway On and Off Switch—Powers the residential gateway on and off RESET—Activating this switch resets the residential gateway. Pressing this switch for more than 10 seconds resets the device to factory default values and resets the residential gateway PSTN—Connects to the home telephone wiring and is used as a backup to voice over IP (VoIP) service in the event of a power outage to the residential gateway TEL 1 and TEL 2—RJ-11 telephone ports connect to home telephone wiring to conventional telephones or fax machines HPNA—Connects to the coaxial cable wiring in the house for data and video distribution LAN 1-LAN 3 W/LAN 4—Four RJ-45 Ethernet ports connect as follows: LAN 1 through 3 connect to the Ethernet port on your PC or your home network W/LAN 4 connects to the Ethernet port on your PC if used as a LAN port or optionally as an Ethernet wide area network (WAN) port that connects to the service provider network USB DEVICE—12 Mbps USB port connects to the USB port on your device such as a flash drive or digital camera DSL—RJ-11 port connects to the DSL line from the service provider 10 ANTENNA—Receives and transmits data packets to wireless devices 4030765 Rev 01 3-6-2009 Draft 2 Chapter 2 Installing the Residential Gateway You can install the residential gateway in your home office and access the Internet from your kitchen computer to get your favorite recipe. Use this chapter to properly install your residential gateway and to connect the residential gateway to your computer and other devices in your home. In This Chapter 4030765 Rev 01 Mounting the Residential Gateway Vertically ................................... 8 Mounting the Residential Gateway to the Wall ................................. 9 Connecting Your Computer to the Residential Gateway................ 10 Connecting the DSL Interface ............................................................. 12 3-6-2009 Draft Chapter 2 Installing the Residential Gateway Mounting the Residential Gateway Vertically Some installations may require that you place the residential gateway in a vertical position. Use proper care when installing the residential gateway in a vertical position. Be sure that the housing of the residential gateway is vertical and that the stand is extended as shown in the following illustration: 4030765 Rev 01 3-6-2009 Draft Mounting the Residential Gateway to the Wall Mounting the Residential Gateway to the Wall The following illustration shows the location and dimensions of the wall-mounting slots on the bottom of the residential gateway. Use the information on this page as a guide for mounting your residential gateway to the wall. 4030765 Rev 01 3-6-2009 Draft Chapter 2 Installing the Residential Gateway Connecting Your Computer to the Residential Gateway You can connect a computer to the residential gateway using one of the following methods: Ethernet Connection Wireless Connection Note: These instructions describe a PC connection. You could also connect another type of device with a wireless interface. See the owner's manual that came with the device for instructions. Connecting the Computer with an Ethernet Connection Complete these steps to connect the computer with an Ethernet connection. 10 Connect the power adapter that came with the residential gateway to the POWER port on the residential gateway and to an electrical outlet. Power on the residential gateway. After the residential gateway has completed its startup process, the POWER LED on the front panel of the residential gateway should be green. Connect the Ethernet cable provided with the residential gateway from any available Ethernet port (LAN 1 through LAN 4) on the gateway to the Ethernet port on the computer. Connect the gray cable provided with the residential gateway from the DSL port on the gateway to a telephone wall jack. See Connecting the DSL Interface (on page 12) for more information. 4030765 Rev 01 3-6-2009 Draft Connecting Your Computer to the Residential Gateway Connecting the Computer with a Wireless Connection A wireless connection requires a wireless-enabled notebook or a computer with an 802.11b/g wireless network adapter installed. Complete these steps to connect the computer with a wireless connection. 4030765 Rev 01 Connect the power adapter that came with the residential gateway to the POWER port on the residential gateway and to to an electrical outlet. Power on the residential gateway. After the residential gateway has completed its startup process, the POWER light on the front panel of the residential gateway should be green. Connect the gray cable provided with the residential gateway from the DSL port on the residential gateway to a telephone wall jack. See Connecting the DSL Interface (on page 12) for more information. Follow the instructions in your owner's manual for your PC or laptop to activate the wireless connection. 11 3-6-2009 Draft Chapter 2 Installing the Residential Gateway Connecting the DSL Interface Now that you have connected the gateway to power and you have made the LAN connections, you can connect the DSL interface (connection to the wall jack) as shown in the following illustration . This illustration shows all of the attached devices connected to the residential gateway. For IPTV service, you must connect the residential gateway to an IP set-top. You can connect to an IP set-top using an Ethernet or coaxial connection. Ethernet Connection Complete the following steps to connect the residential gateway to an IP set-top through Ethernet for IPTV service. 12 Ensure that the residential gateway is powered on. Connect an Ethernet cable from the Ethernet port (LAN 1 through LAN 4) on the gateway to the Network port on the set-top. Power on the IP set-top. 4030765 Rev 01 3-6-2009 Draft Connecting the DSL Interface Coaxial Connection Complete the following steps to connect the residential gateway to an IP set-top with coaxial cable for IPTV service. 4030765 Rev 01 Ensure that the residential gateway is powered on. Connect a coaxial cable from the HPNA port on the gateway to the TO WALL (Video In) port on the set-top. Power on the IP set-top. 13 3-6-2009 Draft 3-6-2009 Draft 3 Chapter 3 Configuration and Operation The DDR2201 residential gateway contains web pages that show the current status of the residential gateway and that allow you to configure the device. Advanced users can configure parameters such as DHCP (Dynamic Host Configuration Protocol), wireless network settings, port forwarding, parental control, and so forth. This section provides information that you can use to configure and interact with the residential gateway through the user interface.The screens shown in this guide represent the default values for the device. Use this chapter to help you check the status of the residential gateway and to configure the device. 4030765 Rev 01 15 3-6-2009 Draft Chapter 3 Configuration and Operation In This Chapter 16 Logging In to the Residential Gateway ............................................. 17 System Summary .................................................................................. 18 Setting Up Your System with the Setup Wizard .............................. 19 Setting System Date and Time ............................................................ 24 Setting Password................................................................................... 25 DHCP Leases ......................................................................................... 26 WAN Information................................................................................. 27 Route Information................................................................................. 28 ARP Information................................................................................... 29 CPU Information................................................................................... 30 Memory Information............................................................................ 31 LAN Statistics ........................................................................................ 32 WAN Statistics ...................................................................................... 33 ATM Statistics ....................................................................................... 34 Tools Update Software......................................................................... 35 Updating Software................................................................................ 36 Settings Backup ..................................................................................... 38 Update Settings ..................................................................................... 40 Restore Default Settings....................................................................... 42 Saving the Configuration for the Residential Gateway................... 44 Time Settings ......................................................................................... 46 Access Control Services ....................................................................... 49 IP Access Control .................................................................................. 51 Password Access to the Residential Gateway .................................. 54 Http Server Port .................................................................................... 57 System Log Configuration................................................................... 59 System Logs ........................................................................................... 64 Print Server Settings ............................................................................. 66 Clone MAC Addresses......................................................................... 69 Voice SIP Basic Configuration ............................................................ 72 Voice SIP Advanced Configuration ................................................... 76 USB File List........................................................................................... 79 4030765 Rev 01 3-6-2009 Draft Logging In to the Residential Gateway The default configuration of the residential gateway uses IP address 192.168.1.254. If you have connected the residential gateway correctly and you have properly configured your computer, use the following steps to log in to the residential gateway as an administrator. Note: A non-administrative user may need a different user name and password for logging in to the residential gateway. These users can access non-privileged information. On your PC, open the web browser that you prefer to use. In the address field, enter the following IP address: 192.168.1.254. The system prompts you to enter your user name and password. Enter admin for both the user name and password. The residential gateway opens with the System Summary page in the forefront. You an use this web interface to check the status of the residential gateway and to configure parameters. Note: The screens shown in this guide represent the default values for the device. 4030765 Rev 01 17 3-6-2009 Draft Chapter 3 Configuration and Operation System Summary The System Summary screen provides a summary of the software used by the residential gateway and indicates the current status of the DSL connection. You can use this screen to find hardware and software information as well as physical and IP layer information. The LogOut button on this screen allows you to quickly log out and log back in without opening a browser. Path: System > Summary Q. to reviewers: Need User Interface with Setup Wizard removed. 18 4030765 Rev 01 3-6-2009 Draft Setting Up Your System with the Setup Wizard Setting Up Your System with the Setup Wizard The Setup Wizard is a step-by-step sequence to set up your residential gateway for the first time to ensure proper operation. The wizard combines the various tasks into one convenient tool to reduce configuration time. The wizard requires that you make a few selections along the process. Your selections will depend on your service provider. To set up your system with the Setup Wizard, complete the following steps. 4030765 Rev 01 Click System on the main screen. The System Summary window opens. 19 3-6-2009 Draft Chapter 3 Configuration and Operation Click Setup Wizard at the top of the screen. The (Setup Wizard 1/4) ------ Clone MAC screen opens. Do you want to enable the clone MAC function? MAC cloning enables you to change the MAC address of the residential gateway to match the MAC address of your PC or any service provider supplied MAC address. If you do not enable MAC cloning, the default MAC address of the residential gateway is used. 20 If yes, select the Enable clone MAC address check box. A field appears for you to enter the MAC address you want to clone. Go to step 4. If no, clear the Enable clone MAC address check box. Go tp step 5. In the MAC address field, type in a MAC address or click Load client PCMAC to load your PC's MAC address. 4030765 Rev 01 3-6-2009 Draft Setting Up Your System with the Setup Wizard 4030765 Rev 01 Click Next. The (Setup Wizard 2/4 ------- Time Settings) screen opens. This screen lets you synchronize the time on the residential gateway with an Internet time server. If you do not syncrhonize the time with an Internet time server, the residential gateway will use its default time. Do you want to automatically synchronize the time on the residential gateway with an Internet Time server? If yes, select the Automatically synchronize with Internet time servers check box. Go to step 7. If no, clear the Automatically synchronize with Internet time servers check box. The residential gateway will get its time from its own internal clock. Go to step 9. In the First NTP time server field, select the Network Time Protocol (NTP) time server from the drop-down list that you want the residential gateway to check first to get its time. In the Second NTP time server field, select the time server from the drop-down list that you want the to use as a backup server for the residential gateway to get its time. In the Time zone offset field, select your time zone from the drop-down list. 21 3-6-2009 Draft Chapter 3 Configuration and Operation 10 Click Next. The (Setup Wizard 3/4) ------- Wireless Basic Settings screen opens. The residential gateway offers wireless capability by default. This screen allows you to configure the wireless settings to work with the devices in your environment. 11 Do you want to enable wireless? If yes, select the Enable Wireless check box. If no, clear the Enable Wireless check box. The wireless capability of the residential gateway is disabled, and all devices communicating with rg will have to be hard wired. 12 Do you want to prevent other wireless devices from communicating over the wireless network with the residential gateway? If yes, select the Hide Access Point check box. If no, clear the Hide Access Point check box. No devices will be locked out from communicating with the residential gateway over the wireless network. 13 In the SSID field, enter the service set identifier (SSID). 14 In the channel field, select the channel from the drop-down list to select the frequency that you will use for wireless communication. Values are auto and channels 1 through 11. 15 In the WIreless Mode field, select one of the following modes: 22 802.11g & 802.11b 4030765 Rev 01 3-6-2009 Draft Setting Up Your System with the Setup Wizard 802.11g only 802.11b only 16 In the 54g Protection field, select Auto to enable 54g protection or Off to disable the function. The Auto option will use RTS/CTS to improve 802.11g performance in mixed 802.11g/802.11b networks. Turning the protection off maximizes 802.11g throughput under most conditions. 17 Click Next. The (Setup Wizard 4/4) ----- Wireless Security Settings screen opens. 18 In the Select SSID field, select the SSID from the drop-down list that you want to use. 19 In the Network Authentication field, select one of the following authentication methods from the drop-down list: Open. All devices may access the wireless network. (Preferred Option). WPA-PSK. (Wi-Fi Protected Access-Pre-Shared Key) will secure your network by encryption of all traffic using a pre-shared dynamic key. Shared. Only devices configured with the 64 bit or 128 Bit Key may access the wireless network. 20 Do you want to enable WEP Encryption? If yes, in the WEP Encryption field, select Enabled from the drop-down list. If no, in the WEP Encryption field, select Disabled from the drop-down list. 21 Click Save/Reboot to save the changes you made. Need more detail on result. What happens. 4030765 Rev 01 23 3-6-2009 Draft Chapter 3 Configuration and Operation Setting System Date and Time When you first set up your system with the wizard, you set your systems date and time. At a later time, you may need to reset the date and time, and you can use the following procedure. To set the system date and time, complete the following steps. 24 Click System on the main screen. The System Summary window opens. Under the Admin section on the screen, click NTP Server Setting. The Time Settings screen opens. Make sure the Automatically synchronize with Internet time servers check box is checked. In the First NTP time server field, select clock.fmt.he.net from the drop-down list. In the Second NTP time server field, select time.nist.gov from the drop-down list. In the Time zone offset field, select the time zone that you want to use from the drop-down list. Click Save/Apply to save your settings. 4030765 Rev 01 3-6-2009 Draft Setting Password Setting Password To set the password for the residential gateway, complete the following steps. 4030765 Rev 01 Click System on the main screen. The System Summary window opens. Under the Admin section on the screen, click Password Setting. The Access Control -- Password screen opens. In the Username field, select one of the following options for the user name: admin. Allows unrestricted access to change and view the configuration of the residential gateway. This login allows access to privileged information. support. Allows an ISP technician to access your residential gateway for maintenance and to run diagnostics user. Allows access to view configuration settings and statistics, as well as, to update the residential gateway's software. In the Old Password field, enter the old password you have been using. In the New Password field, enter the new password. In the Confirm Password field, enter the new password again to confirm it. Click Save/Apply to save your user name and password. 25 3-6-2009 Draft Chapter 3 Configuration and Operation DHCP Leases The DHCP Leases screen displays the Dynamic Host Configuration Protocol (DHCP) table. This screen shows a mapping of hosts (shown by their MAC addresses) and their assigned IP addresses. The DHCP server for the residential gateway assigns these IP addresses to the devices. The screen also shows when the lease for the IP address expires. Path: System > Details > LAN DHCP Q. to Reviewers: We need a populated screen 26 4030765 Rev 01 3-6-2009 Draft WAN Information WAN Information The WAN Info screen provides information about the ADSL2+ wide area network (WAN) parameters and status. You can use this screen to check the ADSL2+ connection. Path: System > Details > WAN 4030765 Rev 01 27 3-6-2009 Draft Chapter 3 Configuration and Operation Route Information The Route Info screen shows the routing table for the residential gateway. This screen provides the gateway address for specific destination IP addresses. Path: System > Details > Route 28 4030765 Rev 01 3-6-2009 Draft ARP Information ARP Information The ARP Info screen displays the address resolution protocol (ARP) table. This table shows the IP address to MAC address mapping. Path: System > Details > ARP 4030765 Rev 01 29 3-6-2009 Draft Chapter 3 Configuration and Operation CPU Information CPU Info screen shows detaileinformation about the CPU utilization and the active processes running on the residential gateway. Path: System > Details > CPU Info 30 4030765 Rev 01 3-6-2009 Draft Memory Information Memory Information The Memory Info screen shows the detailed memory availability of the residential gateway. Path: System > Details > Memory Info 4030765 Rev 01 31 3-6-2009 Draft Chapter 3 Configuration and Operation LAN Statistics The Statistics -- LAN screen displays statistics for the local area network (LAN). This screen shows the number of transmitted and received packets on the LAN interface for Ethernet, USB, and wireless devices. Path: System > Statistics > LAN Reset Statistics To reset the statistics, click Reset Statistics on the screen. This action clears the counters and sets them to zero for the packets received and transmitted on the LAN interface. 32 4030765 Rev 01 3-6-2009 Draft WAN Statistics WAN Statistics The Statistics -- WAN screen displays statistics for the devices and interfaces on the wide area network (WAN). This screen shows the number of transmitted and received packets for the DSL WAN interface. Path: System > Statistics > WAN Reset Statistics To reset the statistics, click Reset Statistics on the screen. This action clears the counters and sets them to zero for the packets received and transmitted on the WAN interface. 4030765 Rev 01 33 3-6-2009 Draft Chapter 3 Configuration and Operation ATM Statistics The Statistics -- ATM screen displays statistics on the ATM interface. This screen shows the ATM Layer-2 statistics such as the number of ATM cells transmitted and received over the ATM interface. Path: System>Statistics>ATM Reset Statistics To reset the statistics, click Reset on the screen. This action clears the counters and sets them to zero for the packets received and transmitted on the ATM interface. 34 4030765 Rev 01 3-6-2009 Draft Tools Update Software Tools Update Software The Tools -- Update Software screen allows you to update the software for the residential gateway with a new version. Path: System > Management > Configuration > Update Software 4030765 Rev 01 35 3-6-2009 Draft Chapter 3 Configuration and Operation Updating Software To update the software for the residential gateway, complete the following steps. 36 Click System on the main screen. Click Management. The Configuration screen opens with the Configuration tab in the forefront. 4030765 Rev 01 3-6-2009 Draft Updating Software 4030765 Rev 01 Click Update Software. The Tools Update Software screen opens. In the Software File Name field, click Browse to locate the software image file. Click Update Software to update the software of your residential gateway with the new version. The residential gateway loads the new software and reboots when the software update is complete. 37 3-6-2009 Draft Chapter 3 Configuration and Operation Settings Backup The Settings - Backup screen allows you to back up the residential gateway configuration and save it to disk. Path: System > Management > Configuration > Back Up Config File Backing Up Configuration Settings To back up the configuration settings for the residential gateway, complete the following steps. 38 Click System on the main screen. Click Management. The Configuration screen opens with the Configuration tab in the forefront. 4030765 Rev 01 3-6-2009 Draft Settings Backup 4030765 Rev 01 Click Back Up Config file. The Settings - Backup screen opens. Click Back Up Settings. The following screen is displayed. Click Save. The system prompts you to select a location to store the backup. Select a location and type in a file name. Click Save to save a backup of the configuration. The system displays a message when the download of the file is complete. 39 3-6-2009 Draft Chapter 3 Configuration and Operation Update Settings The Update Settings screen allows you to update the settings for the residential gateway from a source file. We recommend that you use this feature if you want to set up multiple residential gateways with a similar configuration. Path: System > Management > Configuration > Update Config File Updating Configuration Settings To update the configuration settings for the residential gateway, complete the following steps. 40 Click System on the main screen. Click Management. The Configuration screen opens with the Configuration tab in the forefront. 4030765 Rev 01 3-6-2009 Draft Update Settings 4030765 Rev 01 Click Update Config file. The Update Settings screen opens. In the Settings File Name field, enter the name of the configuration file that you want to use to update your settings. You can click Browse to locate the file. Click Update Settings to update the configuration of the residential gateway. Wait a few minutes while the system reboots the residential gateway. The new configuration takes effect after the residential gateway reboots. 41 3-6-2009 Draft Chapter 3 Configuration and Operation Restore Default Settings The Restore Default Settings screen allows you to restore the residential gateway configuration to the default settings. Note: You can also reset the device by inserting a sharp instrument, such as a paper clip, in the reset area on the back of the residential gateway. Path: System > Management > Configuration > Restore Default Settings Restoring the Configuration to the Default Settings To restore the configuration to the default settings, complete the following steps. 42 Click System on the main screen. Click Management. The Configuration screen opens with the Configuration tab in the forefront. 4030765 Rev 01 3-6-2009 Draft Restore Default Settings 4030765 Rev 01 Click Restore Default Settings. The Tools Restore Default Settings screen opens. Click Restore Default Settings. The system displays the following prompt: Click OK. The system displays the following message: Follow the on-screen instructions to restore the default settings. 43 3-6-2009 Draft Chapter 3 Configuration and Operation Saving the Configuration for the Residential Gateway The Reboot the Residential Gateway screen allows you to save any configuration changes and to reboot the router to make the changes take effect. Path: System > Management > Configuration > Restore Default Settings > Save/Reboot Saving the Configuration and Rebooting the Residential Gateway To save any configuration changes and to reboot the router to make the changes take effect, complete the following steps. 44 Click System on the main screen. Click Management. The Configuration screen opens with the Configuration tab in the forefront. 4030765 Rev 01 3-6-2009 Draft Saving the Configuration for the Residential Gateway 4030765 Rev 01 Click Save/Reboot. The system displays the following message: Follow the instructions on the the screen to save the configuration and to reboot the router. The System Summary screen opens when the residential gateway has finished rebooting. The new settings are displayed. 45 3-6-2009 Draft Chapter 3 Configuration and Operation Time Settings The Time Settings screen allows you to synchronize the time for the residential gateway with a network-based time server. Path: System > Management > Settings > Internet Time Synchronize with Internet Time To synchronize the time for the residential gateway with the Internet time, complete the following steps. 46 Click System on the main screen. Click Management. The Configuration screen opens with the Configuration tab in the forefront. 4030765 Rev 01 3-6-2009 Draft Time Settings 4030765 Rev 01 Click the Settings tab. The Settings screen opens. Click Internet Time. The Time Settings screen opens. Check the box Automatically synchronize with Internet time servers. The Time Settings screen opens with populated fields. In the First NTP time server field, select a time server from the pull-down list. If you select Other, enter the name of the server in the blank field. 47 3-6-2009 Draft Chapter 3 Configuration and Operation 48 In the Second NTP time server field, select a time server from the pull-down list. If you select Other, enter the name of the server in the blank field. In the Time zone offset field, select the time zone specific to your area. Click Save/Apply. 4030765 Rev 01 3-6-2009 Draft Access Control Services Access Control Services The Access Control -- Services screen allows you to enable or disable services such as FTP, HTTP, and ICMP on the residential gateway. Path: System > Management > Settings > Service Control List Enabling or Disabling Services To enable or disable services on the residential gateway, complete the following steps. 4030765 Rev 01 Click System on the main screen. Click Management. The Configuration screen opens with the Configuration tab in the forefront. 49 3-6-2009 Draft Chapter 3 Configuration and Operation Click the Settings tab. The Settings screen opens. Click Service Control List. The Access Control -- Services screen opens. To enable or disable a service, do the following: 50 To enable a service, select the check box next to the service you want to enable. A check box with a check indicates that the service is enabled. To disable a service, de-select the check box next to the service you want to disable. A check box without a check indicates that the service is disabled. Click Save/Apply to enable or disable the selected services. 4030765 Rev 01 3-6-2009 Draft IP Access Control IP Access Control The IP Address Access Control mode, if enabled, permits access to local management services from IP addresses contained in the Access Control List. If the Access Control mode is disabled, you cannot configure the residential gateway from non-local IP addresses. For example, you can use this feature to prevent a remote site from configuring the residential gateway. The services are the system applications listed in the Service Control List. Path: System > Management > Settings > IP Access Control Adding IP Address Access Control To add IP address access control, complete the following steps. 4030765 Rev 01 Click System on the main screen. The System Summary screen opens by default. 51 3-6-2009 Draft Chapter 3 Configuration and Operation 52 Click Management. The Configuration screen opens with the Configuration tab in the forefront. Click the Settings tab. The Settings screen opens. Click IP Access Control. The Access Control -- IP Address screen opens. 4030765 Rev 01 3-6-2009 Draft IP Access Control 4030765 Rev 01 Click Add. The Access Control screen opens. In the IP Address field, enter the IP address of the management station that you want to allow access to the local management services. Click Save/Apply to allow access for the IP address you entered. 53 3-6-2009 Draft Chapter 3 Configuration and Operation Password Access to the Residential Gateway Access to the residential gateway is controlled through three user accounts: admin. Allows unrestricted access to change and view the configuration of the residential gateway. This login allows access to privileged information. support. Allows an ISP technician to access your residential gateway for maintenance and to run diagnostics user. Allows access to view configuration settings and statistics, as well as, to update the residential gateway's software. The admin login provides access to all screens (including privileged information) for the residential gateway. The support login and user login provide access to only a subset of the screens provided to the admin login. Path: System > Management > Settings > Passwords 54 4030765 Rev 01 3-6-2009 Draft Password Access to the Residential Gateway Creating Passwords To create passwords for the residential gateway, complete the following steps. 4030765 Rev 01 Click System on the main screen. Click Management. The Configuration screen opens with the Configuration tab in the forefront. Click the Settings tab. The Settings screen opens. 55 3-6-2009 Draft Chapter 3 Configuration and Operation 56 Click Passwords. The Access Control -- Passwords screen opens. In the Username field from the drop-down list, select the type of password you are creating: admin, support, or user. Admin is the default user name. In the Old Password field, enter the old password. The maximum character length is 16 characters, and passwords cannot contain a space. Admin is the default password. In the New Password field, enter the new password. The maximum character length is 16 characters, and passwords cannot contain a space. In the Confirm Password field, enter the new password again to confirm your entry. Click Save/Apply to save the password. 4030765 Rev 01
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V2.3 (128-bit) User Access : Print Tagged PDF : Yes XMP Toolkit : 3.1-701 Modify Date : 2009:03:13 11:45:32+08:00 Create Date : 2009:03:13 11:45:08+08:00 Metadata Date : 2009:03:13 11:45:32+08:00 Creator Tool : Acrobat PDFMaker 7.0 for Word Format : application/pdf Title : DDR2201 Series Residential Gateway Installation and Operation Guide Description : 4030765 Rev 01 Creator : WagnerCA Document ID : uuid:4c859ff9-85a4-4ccb-98a0-1f92f9b63452 Instance ID : uuid:b9e89486-7ce8-4ba9-805d-0b7be4a84292 Producer : Acrobat Distiller 7.0 (Windows) Has XFA : No Page Count : 74 Subject : 4030765 Rev 01 Author : WagnerCAEXIF Metadata provided by EXIF.tools