GemTek Technology C940531G Wireless Super G PCI Adapter User Manual QIG PCI
Gemtek Technology Co., Ltd. Wireless Super G PCI Adapter QIG PCI
Users Manual
Quick Installation Guide
802.11 b/g Wireless PCI Adapter
Model Number : WPIA-116G
Installation Steps
This PCI Adapter operates with Windows XP and Windows 2000.
1. Turn down your computer, assembly PCI adapter with your computer then connect PCI with
Antenna connector.
2. With the computer on and Windows running, insert the Installation CD into the CD-ROM drive. The
auto-start feature starts the installation. If nothing happens within five seconds, click Start > Run
and type d:\autorun.exe (where D: is your CD-ROM drive).and click OK.
3. Your computer goes through a brief installation process during which it displays several windows
indicating what is currently installing.
Respond to the prompts as they appear.
n If a Windows errror message displays, select the option to continue the installation.
n You may receive prompts for the Windows installation CD. Insert the CD for your Windows
operating system and indicate the correct path.
4. Refer to the online help for details on using the PCI Adapter.
2
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Gemtek declares that WPIA-116G ( FCC ID: MXF-C940531G ) is limited in CH1~CH11 for 2.4GHz by
specified firmware controlled in U.S.A.