GemTek Technology F901210 Wireless LAN Card User Manual Manual

Gemtek Technology Co., Ltd. Wireless LAN Card Manual

Revised Manual

Download: GemTek Technology F901210 Wireless LAN Card User Manual Manual
Mirror Download [FCC.gov]GemTek Technology F901210 Wireless LAN Card User Manual Manual
Document ID218148
Application IDA5QzBQqvnaradYRYTkfz9w==
Document DescriptionRevised Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize123.77kB (1547064 bits)
Date Submitted2002-01-02 00:00:00
Date Available2002-01-02 00:00:00
Creation Date2001-12-27 19:11:07
Producing SoftwareAcrobat Distiller 4.0 for Windows
Document Lastmod2001-12-31 15:03:46
Document TitleMicrosoft Word - Manual.doc
Document CreatorAdobePS5.dll Version 5.0.1

Wireless LAN
Gemtek Technology Co., Ltd.
11Mbps Wireless LAN CF Card
WL-379 F
User's Manual
Dec. 26, 2001
User's manual
11Mbps Wireless LAN CF Card
Wireless LAN
Copyright statement
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form
or by any means, whether electronic, mechanical, photocopying, recording, or otherwise without the
prior writing of the publisher.
Printed in Taiwan, Dec. 2001
User's manual
11Mbps Wireless LAN CF Card
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:To assure continued compliance, (example - use only shielded interface cables
when connecting to computer or peripheral devices). Any changes or modifications not
expressly approved by the party responsible for compliance could void the user's authority to
operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
IMPORTANT NOTE:
Federal Communications Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency
exposure limits, human proximity to the antenna shall not be less than 20 cm (8 inches) during normal
operation.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
This transmitter should be turned off when next to the body of the user.
User's manual
11Mbps Wireless LAN CF Card
Wireless LAN
R&TTE Compliance Statement
This equipment complies with all the requirements of the DIRECTIVE 1999/5/EC OF THE
EUROPEAN PARLIAMENT AND THE COUNCIL of 9 March 1999 on radio equipment and
telecommunication terminal Equipment and the mutual recognition of their conformity (R&TTE).
The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal
Equipment and Satellite Earth Station Equipment) As of April 8, 2000.
Safety
This equipment is designed with the utmost care for the safety of those who install and use it. However,
special attention must be paid to the dangers of electric shock and static electricity when working with
electrical equipment. All guidelines of this manual and of the computer manufacturer must therefore be
allowed at all times to ensure the safe use of the equipment.
EU Countries intended for use
The ETSI version of this device is intended for home and office use in Austria, Belgium, Denmark,
Finland, France(with Frequency channel restrictions), Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
The ETSI version of this device is also authorized for use in EFTA member states Iceland,
Liechtenstein, Norway and Switzerland.
EU Countries Not intended for use
None.
Potential restrictive use
France: Only channels 10,11,12, and13
User's manual
11Mbps Wireless LAN CF Card
Wireless LAN
.Contents
1. Introduction …………………………………………………………….………..4
2. Wireless LAN Basics ..............................................................................................................7
3. Installation for Windows platform .....................................................................................8
3.1. Installation Overview……………………………………………………………………………...9
3.2. Install Procedure for Windows
XP………………………………………………………….10
3.3. Install Procedure for Windows 98/ME/2000
……………………………………12
3.4. CE Install Procedure…………………………………………………………………………….23
4. Configuration Utility…………………………………………………………………………………29
4.1 Link Info ......................................................................................................................................30
4.2 CONFIGURATION……………………………………………………………………………………………………………………………….32
4.3 ENCRYPTION………………………………………………………………………………………………………………………………………..34
4.4 ABOUT……………………………………………………………………………………………………………………………………………………..36
5. Troubleshooting ......................................................................................................................37
6. Technical specifications of Wireless LAN ...................................................................39
User's manual
11Mbps Wireless LAN CF Card
Wireless LAN
1. Introduction
Thank you for purchasing your 11Mbps Wireless LAN CF Card. This manual will assist you with the
installation procedure.
The package you have received should contain the following items:
•= 11Mbps Wireless LAN CF Card
•= User's manual
•= CD containing Wireless LAN Management utility and drivers
Note: if anything is missing, please contact your vendor
The CD contains drivers and Configuration Utility program that is used for managing the Wireless LAN
CF Card and establishing the wireless connection with your Local Area Network.
User's manual
11Mbps Wireless LAN CF Card
Wireless LAN
2. Wireless LAN Basics
Wireless LAN (Local Area Networks) systems offer a great number of advantages over a traditional,
wired system. Wireless LANs (WLANs) are more flexible, easier to setup and manage and often more
cost effective than their wired equivalence.
Using radio frequency (RF) technology, WLANs transmit and receive data over the air, minimizing the
need for wired connections. Thus, WLANs combine data connectivity with user mobility, and, through
simplified configuration, enable movable LANs.
With wireless LANs, users can access shared information without looking for a place to plug in and
network managers can set up or augment networks without installing or moving wires. Wireless LANs
offer the following productivity, convenience and cost advantages over traditional wired networks:
•= Mobility - Wireless LAN systems can provide LAN users with access to real-time information
anywhere in their organization. This mobility supports productivity and service opportunities not
possible with wired networks.
•= Installation Speed and Simplicity - Installing a wireless LAN system can be fast and easy and can
eliminate the need to pull cable through walls and ceilings.
•= Installation Flexibility - Wireless technology allows the network to go where wires cannot go.
•= Reduced Cost-of-Ownership - While the initial investment required for wireless LAN hardware
might be higher than the cost of wired LAN hardware, overall installation expenses and life-cycle
costs will be significantly lower. Long-term cost benefits are greatest in dynamic environments
requiring frequent moves, adds, and changes.
•= Scalability - Wireless LAN systems can be configured in a variety of topologies to meet the needs
of specific applications and installations. Configurations are easily changed and range from peerto-peer to full infrastructure networks, also allow roaming over a broad area.
User's manual
11Mbps Wireless LAN CF Card
Wireless LAN
3. Installation for Windows platform
The following section will assist you to in installing wireless LAN CF Adapter successfully. You will first
install software (Utility) and then insert the Wireless LAN CF Adapter, and finally set the network
properties to accommodate resource sharing and select the type of wireless network that you wish to
install. The Wireless LAN CF card can easily be installed and used, without bothering to connect
cables for keeping your computer to use network resources.
User's manual
11Mbps Wireless LAN CF Card
Wireless LAN
3.1. Installation Overview
Here are some steps you will perform in establishing your wireless network connection:
Install the Access Point at first. AP is needed in case of Infrastructure network mode.
Install the software using the Install CD.
Install the Wireless LAN CF Card (WIRELESS LAN 11Mbps CF Adapter).
Install the network protocol(s) required to communicate on your network. Most likely you will need
the TCP/IP protocol.
User's manual
11Mbps Wireless LAN CF Card
Wireless LAN
3.2. Install Procedure for Windows XP
1. Insert your CF card into PCMCIA slot of your system, and then system will detect new hardware.
Select “Install from a list or specific location (Advanced) “, then click Next to continue.
Give the directory where you have stored the Win XP driver. Click Next to continue.
User's manual
11Mbps Wireless LAN CF Card
10
Wireless LAN
Once your system detected the driver, Microsoft will show a warning message as below.
Click “ Continue Anyway ” for next step.
After copy the file to your system, then the setup is finish.
User's manual
11Mbps Wireless LAN CF Card
11
Wireless LAN
3.3. Install Procedure for Windows 98/ME/2000
Note: Do not insert the WLAN CF Adapter until you are asked to do so, failure of which may result in unsuccessful
installation of your WLAN device.
Please follow the following steps one by one in order to install the WLAN CF Adapter successfully.
Note: Install WLAN CF card on your laptop PC must add additional PCMCIA adapter.
1. Power on your computer and allow Windows 98/ME/2000 to load fully.
2. Be sure that there is no Wireless LAN 11Mbps CF Adapter inserted yet.
3. Insert the given Installation CD in the CD-ROM and then click on the Setup.
At the “ Welcome” window, Click Next.
User's manual
11Mbps Wireless LAN CF Card
12
Wireless LAN
4. Accept the license agreement.
Accept the license agreement. Click Yes to accept.
Setup is complete. Click Finish.
User's manual
11Mbps Wireless LAN CF Card
13
Wireless LAN
5. Insert Wireless LAN 11 Mbps CF Adapter into slot
Windows will recognize the WLAN adapter and auto detect the driver, if the system did not find the
driver automatically, please install the driver manually.
Click Next .
User's manual
11Mbps Wireless LAN CF Card
14
Wireless LAN
Click Next .
Click Next.
User's manual
11Mbps Wireless LAN CF Card
15
Wireless LAN
Click Yes to finish the setup & restart the computer.
6. Click the right button of mouse on My Computer  Properties  Device Manager.
Check whether it has WLAN adapter in one of the sockets or not. If you find Wireless LAN
11Mbps Adapter in one of the sockets, it means the card is detected properly.
User's manual
11Mbps Wireless LAN CF Card
16
Wireless LAN
7.
Click right button of mouse on the Network Neighborhood .
8. Select Properties from the pop up menu. The network box appears and you see three main tables:
Configuration, Identification, and Access Control.
9. Click on the Configuration tab and then click on the Add button. Select Network Component Type
box appears. Click on the Protocol the click the Add button.
10. Select Network Protocols box appears. From the list of manufactures, click on Microsoft. From the
list of network protocols list, select NetBEUI, then click OK.
User's manual
11Mbps Wireless LAN CF Card
17
Wireless LAN
11. The NetBEUI protocol is now installed. After clicking on OK return back to Network Component
Type box.
12. Repeat the step 15 and 16 to add IPX/SPX protocol.
13. Repeat the step 15 and 16 to add TCP/IP protocol.
14. Click on the TCP/IP option for setting the IP address for your computer. You can select either Static
or DHCP setting. If you use the static IP setup then enter the IP value, Subnet masking, DNS,
Domain/ Workgroup name, and Gateway Address values. After setting these parameters
appropriately, click OK to return to Network Component Type and you can select the File and
Printer Sharing options as well as the Access to your computer like other users connected to that
network by setting the computer sharing options. Click on OK.
User's manual
11Mbps Wireless LAN CF Card
18
Wireless LAN
15. Screen message do want to restart your Computer will pop up. Select Yes. It will shut down your
computer and restart.
Important: Restart your computer to make the changes effective before you reinstall the
driver.
User's manual
11Mbps Wireless LAN CF Card
19
Wireless LAN
Uninstall Procedure
If you want to uninstall the WLAN adapter, please follow the steps as below,
Step 1:
From right bottom corner of system bar, click right button of mouse on
then will show a window as below
Click Yes.
Step 2:
From Start menu  Settings  Control Pannel  Add / Remove Programs
Remove “ Wireless LAN 11Mbps for Windows.”
Click Change /Remove
User's manual
11Mbps Wireless LAN CF Card
20
Wireless LAN
Step 3:
From System Properties  Hardware  Device Manager  Network adapters
Click right button of mouse on Wireless LAN 11Mbps Adapter
 Uninstall…
then will show a message
Click OK.
The Uninstallation is complete.
User's manual
11Mbps Wireless LAN CF Card
21
Wireless LAN
Step 4:
Restart your Computer.
User's manual
11Mbps Wireless LAN CF Card
22
Wireless LAN
3.4. CE Install Procedure
Please be note that the current version of driver only supports Strong ARM processor.
Note: Be sure that your PC or Notebook has installed software such as Active Sync for transmit data
to your PDA / handhold PC.
We assume that you have installed Windows CE Services on your desktop PC and that you have
connected the PC to PDA or handheld PC with a serial connection.
Note: The CF card shall not be plugged into PDA/handheld PC if not stated.
1) Run the Gemtek 1718_for WinCE300 PPC.exe from the CD. This will bring up installation screen:
If you would continue go through the process by pressing “Next” button, otherwise select “Cancel” if
you wish to stop the installation process.
User's manual
11Mbps Wireless LAN CF Card
23
Wireless LAN
Accept license agreement by click “Yes” button. If you disagree with terms of stated, then press “No” &
exit the installation.
When software license agreement is accepted, system will bring you user info dialog.
User's manual
11Mbps Wireless LAN CF Card
24
Wireless LAN
Click Finish to complete the installation.
User's manual
11Mbps Wireless LAN CF Card
25
Wireless LAN
2) Plug-in the Wireless LAN CF/PC card into the card slot of your PDA/handhold PC
3) Go to the Start menu, select Settings subfolder. Then select Connections tab from the bottom of
the page.
4) In the Setting page, tap on Network icon. This step will open Network Connections dialog
On the Network Configuration dialog select Gemtek Wireless LAN PC/CF Card Driver and
double tap on it, this will bring you to IP Settings dialog.
5) If your network supports DHCP server, select the first button. Otherwise enter static IP in the field. If
you are not sure about the values of these fields, ask your Internet Service Provider for detail.
User's manual
11Mbps Wireless LAN CF Card
26
Wireless LAN
6) Select “Name Servers” page for DNS settings.
Enter Domain Name Server (DNS) address & WINS (sometimes it is assigned through DHCP
services automatically) in appropriate tab.
NOTE: If Domain Name Server address is not set, networking using Explorer will not work EVEN if the
user enters IP addresses. This is due to internal Windows CE architecture.
User's manual
11Mbps Wireless LAN CF Card
27
Wireless LAN
CE uninstall procedure
Tap on the Start Menu, select Settings tab. Tap on System tab from the bottom of the page, Tap on
the on the Remove Programs. Select Gemtek WL-379F and tap on the Remove button will uninstall
the program.
User's manual
11Mbps Wireless LAN CF Card
28
Wireless LAN
4. Configuration Utility
11Mbps Wireless LAN CF Card uses its own management software. All functions controlled by user
are provided by this application. Usually this application starts automatically,
or click
icon from control pannel to start the Manager application.
A new icon should appear in your Icon tray. If the icon is in red, it means that 11Mbps Wireless
LAN CF Card NIC configuration is invalid or incomplete. Sometimes icon can be colored in red. This
may happen when driver is in Pseudo BSS mode or communication is defined poor connection or
incorrectly.
Figure 1 Icon tray with a new icon
User can navigate through “sheets”, by clicking tabs. “OK” button will minimize window, and
“Cancel” (or X button) will close application. Here we explain the use and meanings of the various
screen messages.
User's manual
11Mbps Wireless LAN CF Card
29
Wireless LAN
4.1 Link Info
State
This field is used to display the current state of the driver. When the state is “Associated “ means
normal flow of operation in Infrastructure mode. The PC is connected to access point. BSSID is
shown in the form of hex digits. Networking is available.
A state of “Scanning ” means that the node is searching for available access point and unable
detects the SSID for an available access point within range.
This field will also display an error message if for some reason the driver failed to initialize.
Rescan
Pressing the rescan button causes the driver to restart and begin its Connection Procedure. The
connection procedure differs depending on the Mode of the driver.
Infrastructure Mode - The driver will scan all available channels continuously until it finds one or
more Access Points that matches its SS ID. At that point it will try and authenticate and
associate with the Access Point.
802.11Ad Hoc Mode - The driver will scan for 5 seconds looking for an existing Ad Hoc network
using the same SS ID.
Current Channel and Tx Rate
Shows the channel of the radio and transmit rate are being currently used for an active connection.
This value has no meaning when the radio is “Scanning”
Throughput
These two fields display the instantaneous wireless Receive and Transmit throughput displayed in
bytes per second. These values are updated every two seconds.
User's manual
11Mbps Wireless LAN CF Card
30
Wireless LAN
Link Quality
The Link Quality bar graph is only active when the node is in Infrastructure Mode. The bar graph
displays the quality of the link between the node and its Access Point. A label summarizes the
quality of the link over the bar graph, which can take on one of the following values:
“Poor”
“Weak”
“Fair”
“Good”
“Excellent”
Signal Strength
The Signal Strength bar graph is only active when the node is in Infrastructure Mode. The bar
graph displays normalized signal strength as reported by the radio, averaged over all frames over
100 bytes long that are received from the Access Point.
User's manual
11Mbps Wireless LAN CF Card
31
Wireless LAN
4.2 CONFIGURATION
The Configuration Tab contains several fields where operating parameters of the driver can be viewed
or changed. Changes to any of the parameters in this panel can be applied to the driver without the
need to reboot the PC.
Restore Defaults:Pressing this button restores each field in the panel to its default value. The Apply
Changes button or OK must be pressed before the default values are saved to the
driver and registry.
Undo Changes: Pressing this button reverts all fields in the panel back to their original values that
were present when the Configuration Utility was opened from the Task Bar.
Apply Changes: This button becomes active only when one of the fields has been modified. Pressing
this button applies the changed values to the driver and saves them to the registry.
User's manual
11Mbps Wireless LAN CF Card
32
Wireless LAN
Mode
This field allows you to select from a list of supported Network “Modes”. The modes displayed will
have two values: “802.11Ad Hoc” and “Infrastructure”.
802.11 Ad Hoc - This is the 802.11 peer-to-peer mode of operation. In 802.11Ad Hoc only one
wireless “cell” is supported for each different SSID. All communication is done from Client to Client
without the use of an Access Point. 802.11 Ad Hoc networking uses the same SSID for
establishing the wireless connection.
Infrastructure - This mode of operation requires the presence of an 802.11 Access Point. All
communication is done via the Access Point, which relays packets to other wireless Clients in
the BSS as well as to nodes on a wired network such as Ethernet.
TX Rate – The transmission rate at which client of AP transmits the data packets. You may set this
to fixed 1Mbps, fixed 2 Mbps, fixed 5.5 Mbps or 11 Mbps.
PS Mode - Power saving mode.
User's manual
11Mbps Wireless LAN CF Card
33
Wireless LAN
4.3 ENCRYPTION
You may desire an additional measure of security on your wireless network, which can be
achieved by using WEP (Wired Equivalent Privacy) encryption.
WEP encrypts each frame
transmitted from the radio using one of the Keys entered from this panel.
When an encrypted frame is received it will only be accepted if it decrypts correctly. This will only
happen if the receiver has the WEP Key used by the transmitter.
This panel allows the entry of four keys for 64/128-bit encryption according to WEP function select.
To be written to the driver and registry, each key must consist of hex digits, which means that only
digit 0-9 and letters A-F are valid entries. If entered incorrectly program will not write keys to a
driver.
Alternatively a Pass-phrase can be entered which is used as a “seed” to randomly generate the
four keys. This saves considerable time since the same keys must be entered into each node on
the wireless network.
User's manual
11Mbps Wireless LAN CF Card
34
Wireless LAN
Key 1 – Key 4
These four fields can be used to manually enter the keys. This may be necessary if you wish
this node to match keys in a different vendor’s product. These fields also display the keys when
they are generated using a Pass-phrase.
Default Tx Key
This button updates the driver with the four keys displayed in Key1 through Key4. The keys are
also written to the registry for permanent storage.
Apply
This button updates the driver with the four keys displayed in Key field. The keys are also
written to the registry for permanent storage. This button clears all the bytes in the four keys,
useful when manually entering and you wish to start over.
User's manual
11Mbps Wireless LAN CF Card
35
Wireless LAN
4.4 ABOUT
About tab shows the product version including the detail of Driver, Configuration Utility, and NIC
firmware version. Users must use this version number when reporting their problems to technical
support.
User's manual
11Mbps Wireless LAN CF Card
36
Wireless LAN
5. Troubleshooting
If you encounter any problems during the installation, or to confirm that the WLAN 11Mbps device is
installed properly, please read the following troubleshooting section.
In Windows 98:
To check that the WLAN 11Mbps device is installed properly, please do the following:
1.
Go to START>SETTINGS>CONTROL PANEL>NETWORK. Choose the Configuration Tab. If you
find the WLAN 11Mbps Adapter, it means the card is installed properly. If you see the Yellow
Question-mark (?) means the resources are conflicting. (Please read further in this section for
solutions.)
-or-
2. Right click on My Computer and select Properties. Select the Device Manager and click on the
Network Adapter. You will find the WLAN 11Mbps Adapter if it is installed successfully. If you see the
Yellow sign, the resources are conflicting. Click on the PCMCIA Card and then on the PCMCIA Card
Service, you can see the status of the PC card. If there is a yellow sign either on the adapter or the PC
card, please check the following.
1.
Check to see if your computer supports 3.3V Card.
2.
Check to see if your computer has a free IRQ. If not, make an IRQ free by assigning the
same IRQ to some devices, for example COM 1, COM 2 can be assigned the same IRQ
values.
3.
Check that you have inserted the right card and have installed the proper driver.
User's manual
11Mbps Wireless LAN CF Card
37
Wireless LAN
Troubleshooting
(Continued)
In Windows 2000:
1.
Check the Windows 2000 Diagnostics. See if there is any conflict in the resource allocation or
the I/O Address, IRQ allocations. If you find that the IRQ or I/O Addresses are already assigned
to some other devices, you must change that value. I/O Address needs 40h byte length.
2.
Go to the Control panel. Double click on the PCMCIA Card and you will see WLAN Adapter.
Double clicking on that will show you the Card Information, driver name and the driver file. You
must confirm the name of the driver and the driver file as "prismnic.inf" and "prismnds.sys". If
you do not find the names listed above, there are some problems and the driver is not installed
properly. Reinstall the driver.
Note: Check the PnP BIOS setup menu and select no in case of the WLAN Adapter installation.
User's manual
11Mbps Wireless LAN CF Card
38
Wireless LAN
6. Technical specifications of Wireless LAN
Hardware compatibility
−= Compact Flash Type II
Driver support
- Windows XP
−= Windows 98
−= Windows 2000
−= Windows ME
WinCE ( Strong ARM platform)
Standards supported
−= IEEE 802.11 standard for Wireless LAN
−= All major networking standards (including TCP/IP, IPX)
Environmental
Operating temperature (ambient):
−= -10°C to 50°C (Operating),-20 to 70°C (Storing)
−= Max . Humidity: 95% Non-condensing
Power specifications
Operating voltage:
−= +3.3V DC ±5%
−= Nominal Temp Range:
15 dBm
−= Extended Temp Range:
14 dBm min.
−= Transmit Power, 2.7v to 3v: 14 dBm min.
Radio specifications
Range:
−= per cell indoors approx. 35-100 meters or more
−= per cell outdoors up to 100-300 meters
Frequency range:
−= 2.4-2.4835 GHz, direct sequence spread spectrum
Number of Channels:
−= Europe: 13 (1-13 )
−= US: 11 (1-11 )
−= France: 4 (10-13 )
−= Japan: 14 (1-14 )
User's manual
11Mbps Wireless LAN CF Card
39
Wireless LAN
Antenna system:
−= Internal patch antenna supporting diversity.
Mobility:
−= Seamless roaming across cell boundaries with handover
Specific features
Supported bit rates:
−= 11 Mbps
−= 5.5 Mbps
−= 2 Mbps
−= 1 Mbps
Data encryption:
−= 64 /128 bit WEP Encryption
Utility Software:
−= Management utility software
Physical Dimensions
58x42.8x7.15mm
User's manual
11Mbps Wireless LAN CF Card
40

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2001:12:27 19:11:07Z
Creator                         : AdobePS5.dll Version 5.0.1
Modify Date                     : 2001:12:31 15:03:46+08:00
Page Count                      : 40
Has XFA                         : No
Creation Date                   : 2001:12:27 19:11:07Z
Producer                        : Acrobat Distiller 4.0 for Windows
Mod Date                        : 2001:12:31 15:03:46+08:00
Metadata Date                   : 2001:12:31 15:03:46+08:00
Title                           : Microsoft Word - Manual.doc
EXIF Metadata provided by EXIF.tools
FCC ID Filing: MXF-F901210

Navigation menu