GemTek Technology M930112AG Tablet PC with 802.11 a/b/g and Bluetooth User Manual

Download:
Mirror Download [FCC.gov]
Document ID	413257
Application ID	GeWxBIgldeteqOs704ntjQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.35kB (179401 bits)
Date Submitted	2004-04-10 00:00:00
Date Available	2004-06-18 00:00:00
Creation Date	2004-03-31 17:37:09
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2004-04-01 15:25:42
Document Title	Users Manual

Product Safety Information
Motion Tablet PCs and accessories are designed to optimize safety, minimize strain,
and withstand the rigors of portability. However, to further reduce the risk of
personal injury or damage to the unit, certain precautions should
be observed.
Basic Personal Safety Precautions
■ Do not attempt to service the Tablet PC nor its components yourself. Perform
only those service installations for which Motion provides special instructions,
for example, swapping the battery, changing memory modules. See the Motion
web site at www.motioncomputing.com for a list of serviceable accessories for
your Tablet PC.
■ To avoid personal injury from electric shock or fire:
•
Completely power down the Tablet PC when replacing memory modules,
cleaning the Tablet PC, its components, or chassis, or performing
operations requiring similar steps. To do this, first turn the power off at
the power switch, remove the battery, then disconnect the AC adapter
from the electrical outlet or from any other type of external power source,
such as an external battery
•
Do not operate the Tablet PC near water, for example, near a bathtub,
kitchen sink or laundry tub, in a wet basement, by a swimming pool, or in
the rain. The cases, portfolios, and other accessories currently offered by
Motion are not designed to be water resistant nor water tight. Visit the
Motion website to see the most current list of accessories.
•
Do not connect or disconnect any cables or perform maintenance or
reconfiguration of this product during an electrical storm.
•
Avoid using the wired modem or LAN during an electrical storm, as a
remote risk of electric shock from lightning exists.
•
Do not push foreign objects into air vents or other openings of the Tablet
PC or accessories, such as the PCA card slots or the optical disk drive
bays. Doing so can short out interior components and may cause fire or
electric shock.
•
When installing memory modules, ground yourself by touching a
grounded conductive surface, such as a device with a grounded plug.
Avoid touching the pins and leads on the memory module or internal
circuitry of the Tablet PC.
■ If the Motion battery pack leaks and the fluid get in your eyes, do not rub them.
Instead, rinse your eyes with clean running water and immediately seek medical
attention. Otherwise, eye injury may result.
■ If acid leaking from the battery pack contacts your skin or clothing, immediately
wash it away with running water. Otherwise, skin inflammation can occur.
English 1
Set Up Precautions
■ When setting up the Tablet PC in the Motion FlexDock, Desktop Stand, or
Hardtop Keyboard, place it on a level surface so it does not fall over and damage
the unit, docking station, keyboard, connectors, or other components.
■ When you move the Tablet PC between environments with very different
humidity and/or temperature ranges, allow sufficient time to adjust to the new
humidity or temperature.
■ Do not drop the Tablet PC or subject it to other mechanical shocks.
■ Do not apply heavy pressure to the Tablet PC or subject it to strong impact.
Excessive pressure or impact can cause damage to Tablet PC components or
otherwise cause malfunctions.
Tablet PC Precautions
■ Do not attempt to service the Tablet PC yourself, disassemble nor modify it nor
its components. You may damage the unit or its components.
■ Operate the Tablet PC at the recommended temperature range of +5oC to +35oC
(+41oF to +95oF). Store it at a temperature of -20oC to +60oC (+4oF to +140oF)
■ Certain environments may contain particles or debris that can adhere to the
Tablet PC display or to the Tablet PC pen tip. To avoid damaging the display,
clean it frequently with the cleaning cloth provided or with a soft cloth. You may
spray a window-type cleaner or apply water to the cloth, but do not spray liquids
directly on the display.
■ Change pen tips regularly, especially if you work in an environment that contains
particles or debris. Dropping the pen onto a rough surface may damage the pen
tip or embed particles in it that can damage the Tablet PC display. For
instructions about changing the pen tips, see Chapter 4 of the Motion Tablet PC
User Guide found on the Tablet PC or go to the Motion website at
www.motioncomputing.com to download the latest version of this Guide.
■ Store the pen in the pen bay of the Tablet PC. Carrying it in a pocket, toolbox, or
similar receptacle that contains particles or debris may damage the pen tip or
embed particles in it that can damage the Tablet PC display.
Cabling and Power Cord Precautions
■ Power cord sets for use in other countries must meet the requirements of that
country. Use the appropriate AC adapter and power cord for your locale. For
information about power cord set requirements, contact the Motion Reseller from
whom you purchased the product, or contact Motion Computing if you purchased
the product from us.
■ If no power cord was provided for your Tablet PC or for an accessory, purchase a
power cord that is approved for use in your country and that matches the required
voltage / amperage rating of the Tablet PC.
English
■ If you use an extension cord with your AC adapter, ensure that the total ampere
rating of the products plugged into the extension cord does not exceed the
ampere rating of the extension cable.
■ When using your power cord, make sure to position it around objects so it will
not be cut or punctured.
Power Adapter Precautions
■ Use only the AC adapter and power cord approved for this Tablet PC or Tablet
PC accessory. Use of another type of AC adapter may risk fire or explosion.
■ Place the AC adapter in a ventilated area, such as on a desktop or the floor, when
you use it to run the Tablet PC or to charge the battery. Do not cover the AC
adapter with papers or other items that will reduce cooling; also, do not use the
AC adapter while it is inside a carrying case.
■ Be sure that nothing rests on the AC adapter's power cable and that the cable is
not located where it can be tripped over or stepped on.
■ When using your power cord, make sure to position it around objects so it will
not be cut or punctured.
■ Disconnect power cords and cables by grasping the connector, not by pulling on
the cable itself. As you pull out the connector, keep it evenly aligned to avoid
bending any connector pins. Before you connect a cable, make sure both
connectors are correctly aligned.
Battery Pack Warnings and Precautions
■ The Tablet PC contains an internal lithium ion (Li-ion) battery pack. Replace the
internal battery pack only with a Motion battery or a Motion-approved equivalent
to avoid the risk of fire or explosion resulting in personal injury.
■ If you use an external battery pack to power your Tablet PC, be sure you use only
a Motion-recommended third-party product, which has been tested with the
Motion Tablet PC, Using a non-Motion-recommended external battery may
cause the Tablet PC to overheat, emit smoke, burst and/or ignite and cause
personal injury or damage to the unit.
■ Do not use the battery pack in combination with other types of battery packs
(such as dry-cell battery packs) or battery packs with different capacities or
brands. This can result in it being over discharged during use or overcharged
during recharging, possibly leading it to leak acid, overheat, emit smoke, burst
and/or ignite.
■ Do not dispose of batteries in a fire. They may explode. Dispose of used batteries
according to the manufacturer's instructions. The label on the battery lists the
manufacturer’s name. See the section “Battery Pack Disposal” in the Guide for
more information about battery disposal.
English 3
■ Do not use nor leave the battery pack near a heat source. Heat can melt the
■
■
■
■
■
■
■
■
■
insulation and damage other safety features, possibly leading it to leak acid,
overheat, emit smoke, burst and/or ignite.
Do not immerse the battery pack in water nor allow it to get wet. Its protective
features can be damaged, it can be charged with extremely high current and
voltage, abnormal chemical reactions may occur, possibly leading it to leak acid,
overheat, emit smoke, burst and/or ignite.
Do not disassemble or modify the battery pack. If disassembled, the battery pack
could leak acid, overheat, emit smoke, burst and/or ignite.
Do not connect the positive (+) and negative (-) terminals with a metal object
such as wire. Short-circuiting may occur leading the battery pack to leak acid,
overheat, emit smoke, burst and/or ignite.
Do not pierce the battery pack with a sharp object, strike it with a hammer, step
on it, or throw it. These actions could damage or deform it, internal shortcircuiting can occur, possibly leading it to leak acid, overheat, emit smoke, burst
and/or ignite.
Do not use an apparently deformed or damaged battery pack, which may leak
acid, overheat, emit smoke, burst and/or ignite.
Do not directly solder the battery pack. Heat can melt the insulation and damage
other safety features, possibly leading it to leak acid, overheat, emit smoke, burst
and/or ignite.
Store the battery pack in a location where children cannot reach it. Make sure
children do not remove the battery pack from the Tablet PC or charger.
If the battery pack leaks, gives off a bad odor, generates heat, becomes discolored
or deformed, or in any way appears abnormal during use, recharging or storage,
immediately remove it from the Tablet PC or charger and stop using it, If this is
discovered when you first use the battery, return it to your Motion reseller or to
Motion Computing, if you bought it directly from us.
Do not transport the lithium ion batteries used in your Tablet PC in checked
baggage. You may take up to two spare batteries in carry-on luggage in addition
to the one in your Tablet PC. Transporting batteries in checked baggage or
transporting more than two spare batteries in carry-on baggage violates
transportation law. Remember to remove batteries from the battery charger
before transporting it in carry-on or checked baggage.
■
Battery Precautions
■
(Carbon and Alkaline)
■ Keep batteries out of reach of children.
■ Do not mix old and new batteries of different types (for example, carbon and
alkaline batteries).
■ Always remove old, weak, or worn-out batteries promptly and recycle or dispose
of them according to the manufacturer’s directions.
■ If a battery leaks, remove all batteries and dispose of them according to the
manufacturer’s directions. Before replacing the batteries, clean the battery
English
compartment in accordance with the battery manufacturer’s recommendations. If
battery fluid contacts your skin or clothes, immediately flush them with water.
Battery Warnings
■
(Carbon and Alkaline)
■ Battery electrolytes are corrosive, CAN CAUSE DAMAGE TO THE EYES
AND SKIN, AND MAY BE TOXIC IF SWALLOWED. Avoid the following
actions that can cause the sudden release of battery electrolytes:
■ Do not open, puncture, or mutilate the batteries.
■ Do not heat the batteries.
■ Do not burn the batteries in a fire to dispose of them.
Battery Charger Precautions
■ Read the documentation supplied with the battery charger. This provides
additional information about charging and precautions for use.
■ Use only a Motion battery charger to recharge the batteries. It is specifically
designed for that purpose. Charging with a non-Motion battery charger could
result in extremely high current and voltage, abnormal chemical reactions may
occur, possibly leading it to leak acid, overheat, emit smoke, burst and/or ignite.
■ Battery charging temperature: The ambient temperature of the battery being
charged should from 0º C to +40º C (+32º F to +104º F). Charging the battery
outside this range may harm battery performance or reduce battery life.
■ Do not recharge the battery pack near fire or in extremely hot weather. Hot
temperatures can inhibit recharging or can damage its built-in protective features.
Heat can possibly lead to acid leakage, overheating, smoking, bursting and/or
igniting.
■ If you transport the battery charger in checked baggage, be sure to remove the
batteries from the charger before packing it.
Battery Pack Disposal
■ Dispose of the lithium ion battery packs only at approved disposal sites. To
locate an appropriate site, contact the solid waste disposal officials where you
live or look for a rechargeable battery recycling website that lists disposal
locations near you.
■ Do not dispose of battery packs in a fire, throw them in a trash receptacle, put
them in a recycling bin not intended for their disposal, or otherwise discard them
in a manner that may result in their being hazardous to the environment.
English 5
Travel Precautions
■ For information about transporting batteries, see the section “Battery Warnings
and Precautions” in this guide.
■ When traveling, do not store the Tablet PC in an overhead compartment or other
area where it could slide around, nor check it in your baggage.
■ Do not put the Tablet PC through a metal detector. You can safely put it through
an X-ray security machine without harming any components.
■ Be sure to charge the battery before you hand check the Tablet PC. You may be
asked to turn the Tablet PC on at a baggage check point.
Internal Modem Precautions
■ The modem cable you connect to your Tablet PC should have a minimum wire
size of 26 AWG (American wire gauge) and an UL-compliant RJ-11 modular
plug.
■ Do not plug a modem connector (RJ-11) into a network connection (RJ-45). This
may damage the connector.
■ See the section “Telecommunication Devices/Modem Approvals” in this Guide
for important information about modem use.
Accessory Precautions
■ Please read the instructions packaged with your accessories carefully before
setting up or operating them. The Motion accessory you purchase may include
documentation about safety, precautions, and warnings needed to set up or
operate the accessory. This accessory documentation provides specific
information about functionality, usage limitations, user serviceability, battery
disposal, handling precautions, or electrostatic discharge, etc, for the product.
■ The cases, portfolios, and other accessories currently offered by Motion are not
designed to be water resistant nor water tight. Visit the Motion website to see the
most current list of accessories.
Motion-Recommended Third-Party
Accessories
■ Use only Motion-recommended third-party accessories with a Motion Tablet PC.
These devices have been tested by Motion Computing for use with a Motion
Tablet PC.
■ If you choose to use a non-Motion-recommended third-party accessory it is at
your own risk and may damage the Tablet PC or the accessory device.
English
Comfort and Health
HEALTH WARNING: Keyboard use or use of a pointing device may be linked to
serious injuries or disorders. For further information, visit the My Clinic website at
www.myoclinic.com.
You may help prevent the occasional discomfort in your hands, arms, shoulders,
neck, and other parts of your body by:
■ Taking frequent breaks to stretch and change your working position.
■ Resting your hands and wrists frequently so they have time to recover from
repetitive movements. Use a wrist pad.
■ Using the touch pad on a keyboard or the Tablet PC pen, which change the way
you use your hands and wrists; this provides a break from the keyboard keys or
mouse.
If these symptoms persist or continue to occur and include pain, throbbing, aching,
tingling, numbness, burning sensations, or stiffness, DO NOT IGNORE THESE
WARNING SIGNS. PROMPTLY SEE A QUALIFIED HEALTH
PROFESSIONAL.
English 7
Regulatory and Safety Compliance
The following sections describe regulatory and safety compliance by country and by
region.
NOTE: To determine what regulatory and safety marks apply to a specific product,
component, or accessory, check the product label affixed to the product or its component.
Federal Communications Commission Notice
(United States)
Electromagnetic Interference (EMI) is any electromagnetic disturbance
that interrupts, obstructs, or otherwise degrades or limits the effective
performance of electronics or electrical equipment. These emissions can
potentially disrupt, degrade, or otherwise interfere with authorized
electronic emissions, which may include television, AM/FM broadcasts,
cellular services, radar, air-traffic control, and pagers.
The FCC Rules and Regulations have established Radio Frequency (RF) emission
limits to provide an interference-free RF spectrum. Many electronic devices,
including computers, generate RF energy incidental to their intended function and
are, therefore, covered by these rules.
Your Motion Tablet PC system, Motion FlexDock, Hardtop Keyboard, and all
accessories have been designed and found to meet the regulatory agency limits for
Electromagnetic Compatibility (EMC). EMC is the ability of electronic devices,
including computers, to function properly together in the electronic environment.
However, there is no guarantee that in a specific installation it will not cause
interference. Should this equipment cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, you are
encouraged to try to correct the interference by one or more of the following
measures:
■
■
■
■
Reorient the receiving antenna.
Relocate the Tablet PC and the receiver.
Separate the Tablet PC and the receiver.
Plug the Tablet PC and receiver into different circuits.
You may also need to contact a radio/television technician for assistance.
English
Unintentional Emitter per FCC Part 15
The rating label on Motion Tablet PCs, FlexDock, Hardtop Keyboard, and all
accessories show which class (A or B) these devices fall into. Class B devices have
an FCC logo (shown here) or FCC ID on the label. Class A devices do not have an
FCC ID on the label. Once you determine the class of the device, refer to the
following corresponding statement and to the FCC notices in this Safety and
Regulatory Guide.
■
■
Class A is for business or industrial environments.
Class B is for residential environments.
This device complies with Part 15 of the Federal Communications Commission
(FCC) Rules. Operation is subject to the following two conditions:
■ This device may not cause harmful interference.
■ This device must accept any interference received, including interference that
may cause undesired operation.
Class A Equipment: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a residential environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the manufacturer’s instruction manual, may cause interference
with radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case you will be required to correct
the interference at your own expense.
Class B Equipment: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a residential environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the manufacturer’s instruction manual, may cause interference
with radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, you are encouraged to try to correct the interference by one or
more of the following measures:
■ Reorient or relocate the receiving antenna
■ Increase the separation between the equipment and the receiver
■ Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
English 9
■ Consult the dealer or an experienced radio/television technician
for help
10
English
The following information is provided on the device or devices covered in this
document in compliance with FCC regulations:
■ Model numbers: T001 (Motion M1200 Tablet PC), T002 (Motion M1300 Tablet
■
■
■
■
PC), T003 (Motion M1400 Tablet PC)
Company name: Motion Computing, Inc.
9433 Bee Caves Road, Building 1, Suite 250
Austin, Texas 78733
512-637-1100
Intentional Emitter per FCC Part 15
Embedded in your Tablet PC are various Radio Frequency (RF) wireless
communication devices. It may contain one or more Radio type devices that operate
in the 450-1550 KHz band, as well as devices that operate in the 2.4 or 5.4 GHz
Band. All Radio type devices embedded in your Tablet PC have met all the
qualifications for use under FCC regulations and guidelines.
This equipment complies with FCC Radio Frequency Electromagnetic Signal (RF)
exposure limits set forth for an uncontrolled environment of portable transmission.
This device complies with FCC RF Exposure limits set forth for an uncontrolled
environment, under 47 CFR 2.1093 paragraph (d)(2).
This transmitter must not be co-located or operating in conjunction with any other antenna
antenna or transmitter.
Operation of this wireless communication device is subject to the following two
conditions:
■ This device may not cause harmful interference
■ This device must accept any interference received, including interference that
may cause undesired operation.
WARNING: Do not attempt to service the wireless communication device built into
the Tablet PC yourself. Such action may void the warranty on the Tablet PC. Contact
your Motion Reseller or Motion Computing for information about servicing your
wireless communication device.
NOTE: The Radio Frequency (RF) emitter installed in your Tablet PC must not be located or
operated in conjunction with any other antenna or transmitter.
Modifications
The FCC requires that you be notified that any changes or modifications made to
this device that are not expressly approved by Motion Computing, Inc. may void
your authority to operate the equipment.
Cables
Connections to this Tablet PC must be made only with shielded cables. This reduces
English 11
possible interference with radio communications and complies with FCC Rules and
Regulations for this EMC classification.
Airline Travel Notice
The FAA requires that you suspend wireless operations before boarding
an airplane. These include both internal and external wireless devices.
Internal wireless connections are indicated by the wireless LED on the
Tablet PC front panel (identified by the wireless icon shown here). If the
LED is ON or blinking, the wireless connection is enabled. External
wireless devices may be installed in the PCMCIA Card slot or attached to
the Tablet PC and must also be disabled. For information about disabling these
devices, see IMPORTANT below.
IMPORTANT: To disable internal Tablet PC wireless operations, open the Motion Dashboard
by pressing Hot Key #1 and under Wireless, disable any wireless connections (802.11 or
internal Bluetooth wireless radios). When internal Tablet PC wireless operations are disabled,
the wireless LED on the Tablet PC front panel is OFF.
To disable external wireless devices installed in the Tablet PC PCMCIA Card slot or attached
to the Tablet PC, eject the card or unplug the external device. To disable external devices via
the software, see the instructions that came with the device or contact the device
manufacturer.
12
English
IC Notice (Canada Only)
Unintentional Emitter per ICES-003
Motion Computing Tablet PCs are classified
by the Industry Canada (IC) InterferenceCausing Equipment Standard #3 (ICES-003) as Class B digital devices. This
classification is located on the label on the bottom of your Tablet PC. Look for a
statement on the label similar to the following: Canada ICES-003, Class/Classe B.
This Class B (or Class A, if so indicated on the registration label) digital apparatus
meets the requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la Classe B (ou Classe A, si ainsi indiqué sur l’étiquette
d’enregistration) respecte toutes les exigences du Règlement sur le Matériel
Brouilleur du Canada.
Intentional Emitter per RSS 210
Embedded in your Tablet PC are various Radio Frequency (RF) wireless
communication devices. It may contain one or more Radio type devices that operate
in the 450-1550 KHz band, as well as devices that operate in the 2.4 or 5.4 GHz
Band. All Radio type devices embedded in your Tablet PC comply with RSS 210 of
Industry Canada. Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of this device.
L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1) il
ne doit pas produire de brouillage et (2) l’utilsateur du dispositif doit éntre prét a
accepter tout brouillage radioélectrique recu, meme si ce brouillage est susceptible
de compromettre le fonctionnement du dispositif.
The term “IC” before the equipment certification number only signifies that the
Industry Canada technical specifications were met.
This equipment complies with Industry Canada Radio Frequency Electromagnetic
Signal (RF) exposure limits set forth for an uncontrolled environment of portable
transmission.
English 13
Conformité Européne (CE) (European Union)
Unintentional Emitter
The (Conformité Européne) symbol found on the Tablet PC indicates
compliance to the EMC Directive and the Low Voltage Directive of the
European Union. This means that the Tablet PC meets the following
technical standards:
■ EN 55011 (CISPR 11) — Limits and Methods of Measurement of Radio
■
■
■
■
■
Interference Characteristics of Industrial, Scientific, And Medical (ISM) Radio
Frequency Equipment
EN 55022 (CISPR22) — Limits and Methods of Measurement of Radio
Interference Characteristics of Information Technology Equipment
EN 55024 (IEC 61000 4-2, 4-3, 4-3, 4-5, 4-6, 4-8, 4-11) — Information
Technology Equipment-Immunity Characteristics - Limits and Methods of
Measurement
EN 61000 3-2 (IEC 61000 3-2) — Electromagnetic compatibility (EMC) - Part 3:
Limits - Section 2: Limitations for harmonic current emissions (Equipment input
current up to and including 16 A per phase)
EN 61000 3-3 (IEC 61000 3-3) — Electromagnetic compatibility (EMC) - Part 3:
Limits - Section 3: Limitations of voltage fluctuations and flicker in low-voltage
supply systems for equipment with rated current up to and including 16 A
EN60950 (IEC 60950 3rd Ed; 1999; 2000) — Safety of Information Technology
Equipment
Intentional Emitter
The CE mark shown here is a device ID that means the
product complies with the essential requirements of the
R&TTE Directive 1999/5/EC with essential test suites.
Embedded in your Tablet PC are various Radio Frequency (RF) wireless
communication devices. It may contain one or more Radio type devices that operate
in the 450-1550 KHz band, as well as devices that operate in the 2.4 or 5.4 GHz
Band. All Radio type devices embedded in your Tablet PC comply with standards:
■ EN60950 (IEC 60950 3rd Ed; 1999; 2000) — Safety of Information Technology
Equipment
■ ETS 300 328 — Technical requirements for radio equipment
■ ETS 300 826 — General EMC requirements for radio equipment
Belegië/Belgique
For outdoor usage only, channels 10 (2457 MHz) and 11 (2462 MHz) are allowed.
For private usage outside buildings across public grounds over less than 300 meters,
14
English
no special registration with IBPT/BIPT (Belgium Institute for Postal services and
Telecommunications) is required. Registration to IBPT/BIPT is required for private
usage outside buildings across public grounds over more than 300 meters. An IBPT/
BIPT license is required for public usage outside buildings. For registration and
license, please contact IBPT/BIPT.
Gebruik buiten gebouw alleen op kanalen 10 (2457 MHz) en 11 (2462 MHz). Voor
privé-gebruik buiten gebouw over publieke groud over afstand kleiner dan 300m
geen registratie bij BIPT/IBPT nodig; voor gebruik over afstand groter dan 300m is
wel registratie bij BIPT/IBPT nodig. Voor publiek gebruik buiten gebouwen is
licentie van BIPT/IBPT verplicht. Voor registratie of licentie kunt u contact
opnemen met BIPT.
L’utilisation en extérieur est autorisé sur le canal 10 (2457 MHz) et 11 (2462 MHz).
Dans le cas d’une utilization privée, à l’extérieur d’un bâtiment, audessus d’un
espace public, aucun enregistrement n’est pas nécessaire pour une distance de moins
de 300m. Pour une distance supérieure à 300m un enregistrement auprés de l’IBPT
est requisé. Pour une utilisation publique à l’extérieur de bâtiments, une licence de
l’IBPT est requise. Pour les enregistrements et licences, veuillez contacter l’IBPT.
Deutschland
A license is required for outdoor installations. Check with reseller for the procedure
to follow.
Anmeldung im Outdoor-Bereich notwendig, aber nicht genehmigungspflichtig. Bitte
mit Händler die Vorgehensweise abstimmen.
France
Restricted frequency band: only channels 10 and 11 (2457 MHz and 2462 MHz
respectively) may be used in France.
A license is required for every installation, indoor and outdoor. Please contact ART
(L’Autorité de Régulation des Télécommunications) for procedure to follow.
Bande de fréquence restreinte: seuls les canaux 10 à 11 (2457 et 2462 MHz
respectivement) doivent être utilisés en France.
Toute utilisation, qu’elle soit intérieure ou extérieure, est soumise à autorisation.
Vous pouvez contacter L’Autorité de Régulation des Télécommunications
(http://www.art-telecom.fr) pour la procédure à suivre.
English 15
Italia
A license is required for indoor use. Use with outdoor installations is not allowed.
E’necessaria la concessione ministeriale anche per l’uso interno Verificare con i
rivenditori la procedura da seguire. L’uso per installazione in esterni non
e’permessa.
Nederland
A license is required for outdoor installations. Check with reseller for the procedure
to follow.
Licentie verplicht voor gebruik met buitenatennes. Neem contact op met verkoper
voor juiste procedure.
Telecommunication Devices/Modem
Approvals
The telecommunication device in Motion Tablet PCs is approved for connection to
the telephone network in the countries whose approval markings are indicated on
the product label located on the Tablet PC or on an internal Tablet PC component.
See the documentation included with the product to ensure the product is configured
for the country in which it is located. Selecting a country other than the one in which
it is located may cause the modem to be configured in a way that violates the
telecommunications regulations of that country. In addition, the modem may not
function properly if you make an incorrect country selection. When selecting a
country, if a message appears that states that the country is not supported, then the
modem has not been approved for use in this country and should not be used.
United States Modem Statement
Motion Tablet PCs contain an internal modem that has been tested to comply with
FCC Standards, specifically FCC Part 68 Reg. No: 5ZXMUL-36273-FB-E; AC
REN:0.1B; USOC:RJ11; DOC REN:.0.0. The internal modem is located under the
rectangular Hard Disk Drive cover on the Tablet PC back panel and contains the
regulatory label.
Canadian Modem Statement
This equipment meets telecommunications network protective, operational, and
safety requirements as prescribed in the appropriate Terminal Equipment Technical
Requirements document(s). This is confirmed by marking the equipment with the
16
English
Industry Canada certification number. The Department does not guarantee that the
equipment will operate to your satisfaction.
Before installing the equipment, you should ensure that it is permissible to be
connected to the facilities of the local telecommunications company. The equipment
must also be installed using an acceptable method of connection. You should be
aware that compliance with the above conditions might not prevent degradation of
service in some situations.
Repairs to certified equipment should be coordinated by a representative designated
by the supplier. Any repairs or alterations made by you to this equipment, or
equipment malfunctions, may give the telecommunications company cause to
request you to disconnect the equipment.
You should ensure for your own protection that the electrical ground connections of
the power utility, telephone lines, and internal metallic water pipe system, if present,
are connected together. This precaution may be particularly important in rural areas.
The Ringer Equivalence Number (REN) assigned to each terminal device provides
an indication of the maximum number of terminals allowed to be connected to a
telephone interface. The termination of an interface may consist of any combination
of devices, subject only to the requirement that the sum of the RENs of all the
devices does not exceed 5. The REN for this device is 1.
English 17
Other Notices and Marks
Battery Notice
Motion Computing sealed lithium ion batteries comply with all applicable shipping
regulations as prescribed by industry and legal standards. This includes compliance
with the UN Recommendations on the Transport of Dangerous Goods; IATA
(International Air Transport Agency) Dangerous Goods Regulations, 44th Edition,
2003, Special Provisions A45, and applicable U.S. DOT regulations for the safe
transport of lithium ion batteries. Each Motion Computing cell or battery has been
tested under provisions of the UN Manual of Tests and Criteria, Part III, Sub-section
38.3.
Laser Safety Notice
For safety and regulatory information about third-party products that may contain
Class 1 laser equipment, see the documentation shipped with the product.
Motion CDROM and DVD/CDRW drives are Class 1 laser products. A Class 1
laser is considered to be incapable of producing damaging radiation levels and is
therefore determined to be eye safe. These lasers are exempt from most control
measures. Many lasers in this class are lasers which are embedded in an enclosure
that prohibits or limits access to the laser radiation. However, we recommend that
you do not stare into the beam or view it directly with optical instruments.
18
English
Wireless Notices
In some environments, the use of wireless devices may be restricted. Such
restrictions may apply aboard airplanes, in hospitals, near explosives, in hazardous
locations, etc. If you are uncertain of the policy that applies to the use of this device,
please ask for authorization to use it prior to turning it on. For instructions for
disabling internal and external wireless devices, see the section “Airline Travel
Notice” in this guide.
Saudi Arabian Quality Mark
All Motion Tablet PCs and Motion Tablet PC systems meet the Quality Mark
standards issued by the Saudi Arabian Standards Organization (SASO) in Articles 3
and 12 in Royal Decree No. M/10 dated 1392(H) - 03-03.
Standards Applying Only to Motion M1200
and M1300 Tablet PCs and Accessories
NOTE: To determine what regulatory and safety marks apply to a specific product,
component, or accessory, check the product label affixed to the product or its component.
Australia Telecommunications (A-Tick)
Statement
All Motion Tablet PCs and Motion Tablet PC systems meet the Australian
Communications Authority (ASA) standards found in Schedule 3 of the
Labeling Notice Radiocommunications Act of 1992 (A-Tick) for
compatibility for telecommunications-customer equipment.
IMPORTANT TELECOMMUNICATIONS REGULATORY NOTICE
The user must not activate the decadic (pulse) dialing or Easycall functions of the Tablet PC
internal modem. The Tablet PC does not correctly support these functions for Australia and
New Zealand; use of these functions will void telecommunications compliance. The Tablet
PC shall be connected to the Telecommunications Network through a line cord that meets the
requirements of ASA TS008.
New Zealand Telecommunications (C-Tick)
Statement
All Motion Tablet PCs and Motion Tablet PC systems comply with the
New Zealand Telecommunications Authority (NZTA) PTC200
English 19
specification for the internal modem. The permit number issued for this compliance
appears on the regulatory label on the product.
IMPORTANT TELECOMMUNICATIONS REGULATORY NOTICE
The user must not activate the decadic (pulse) dialing or Easycall functions of the Tablet PC
internal modem. The Tablet PC does not correctly support these functions for Australia and
New Zealand; use of these functions will void telecommunications compliance. The Tablet
PC shall be connected to the Telecommunications Network through a line cord that meets the
requirements of ASA TS008.
Standards Applying Only to Motion M1400
Tablet PCs
Internal Bluetooth Module Notice
Class B Equipment: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a residential environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the manufacturer’s instruction manual, may cause interference
with radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, you are encouraged to try to correct the interference by one or
more of the following measures:
■ Reorient or relocate the receiving antenna
■ Increase the separation between the equipment and the receiver
■ Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
■ Consult the dealer or an experienced radio/television technician
for help.
This device complies with Part 15 of the Federal Communications Commission
(FCC) Rules. Operation is subject to the following two conditions:
■ This device may not cause harmful interference.
■ This device must accept any interference received, including interference that
may cause undesired operation.
20
English
FCC Caution: Any changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment also complies with FCC RF radiation exposure limits set forth
for an uncontrolled environment, under 47 CFR 2.1093 paragraph (d)(2), which
addresses RF Exposure from radio frequency devices. Operation is within
5.15GHz ~ 5.25GHz frequency range. This frequency range may limit or
restrict the effective use of this equipment to an indoor environment. This
radiated output power is far below the FCC RF exposure limits. Nevertheless,
this device should be used in such a manner that the potential for human
contact during normal operation is minimized. This equipment contains an
internal antenna transmitter whose effective use may be affected if it is colocated or operating in conjunction with any other antenna or transmitter.
English 21

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2004:03:31 17:37:09Z
Modify Date                     : 2004:04:01 15:25:42+08:00
Page Count                      : 21
Creation Date                   : 2004:03:31 17:37:09Z
Producer                        : Acrobat Distiller 4.05 for Windows
Mod Date                        : 2004:04:01 15:25:42+08:00
Metadata Date                   : 2004:04:01 15:25:42+08:00

EXIF Metadata provided by EXIF.tools