GemTek Technology S981116N Internet Protocol Wireless Set Top Box User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1425614
Application ID	PCpjdMGlRT7X2qwWiFBA+Q==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	156.98kB (1962305 bits)
Date Submitted	2011-03-03 00:00:00
Date Available	2011-08-30 00:00:00
Creation Date	2011-02-23 14:02:48
Producing Software	Acrobat Distiller 9.4.0 (Macintosh)
Document Lastmod	2011-02-24 15:09:07
Document Title	untitled

2-23-11 Draft
Installation Manual for
Cisco IPTV Receivers
for use with your AT&T U-verse TV service
Model ISB7005
2-23-11 Draft
Contents
2-23-11 Draft
Notice for Installers ..............................................................................................................4
IMPORTANT SAFETY INSTRUCTIONS .............................................................................4
Change the Way You Watch TV ..........................................................................................6
What’s In the Carton? ..........................................................................................................6
Safety First ..........................................................................................................................6
Identify Your Receiver with the Serial Number ....................................................................6
In This Manual .....................................................................................................................6
Questions About Your Service. ............................................................................................6
Protecting You and the Environment ...................................................................................7
Front Panel ..........................................................................................................................8
Back Panel ..........................................................................................................................9
ISB7005 Wireless Network Connection.............................................................................10
Connecting to the In-Home Network .................................................................................11
Connections for a High-Definition TV (HDTV) ...................................................................12
Connections for a Standard-Definition TV (SDTV) ............................................................13
Connections for a VCR or DVD Recorder .........................................................................14
Connecting an Over-the-Air Converter Box .......................................................................14
Connecting to an HDTV with an HDMI Connector ............................................................15
Connecting to an HDTV with a DVI Connector..................................................................16
Connecting to an HDTV with Component (YPbPr) Connectors ........................................17
Connecting to an SDTV with Component (YPbPr) Connectors.........................................18
Connecting to an SDTV with an S-Video Connector .........................................................19
Connecting to an SDTV with an RCA-Type Connector .....................................................20
Connecting to an SDTV with a Coaxial Cable ...................................................................21
Connecting to a Home Theater System with Component (YPbPr) Connectors ................22
Connecting to a Stereo VCR or DVD Recorder (optional).................................................23
Troubleshooting .................................................................................................................24
Avoid Screen Burn-In ........................................................................................................24
Frequently Asked Questions..............................................................................................25
Picture Formats .................................................................................................................26
Index ..................................................................................................................................27
Compliance Information.....................................................................................................29
Notice for Installers
2-23-11 Draft
The servicing instructions in this notice are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform
any servicing other than that contained in the operating instructions, unless you are qualified to do so.
Note to System Installer
For this apparatus, the cable shield/screen shall be grounded
as close as practical to the point of entry of the cable into the
building. For products sold in the US and Canada, this
reminder is provided to call the system installer's attention to
Article 800-93 and Article 800-100 of the NEC (or Canadian
Electrical Code Part 1), which provides guidelines for proper
grounding of the cable shield.
CAUTION: To reduce the risk of electric shock, do not
remove cover (or back). No user-serviceable parts
inside. Refer servicing to qualified service personnel.
WARNING
TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
This symbol is intended to alert you that uninsulated voltage
within this product may have sufficient magnitude to cause
electric shock.Therefore, it is dangerous to make any kind of
contact with any inside part of this product.
Ce symbole a pour but d’alerter toute personne qu’un contact
avec une pièce interne de ce produit, sous tension et non
isolée, pourrait être suffisant pour provoquer un choc
électrique. Il est donc dangereux d’être en contact avec toute
pièce interne de ce produit.
This symbol is intended to alert you of the presence
of important operating and maintenance (servicing)
instructions in the literature accompanying this product.
Ce symbole a pour but de vous avertir qu’une
documentation importante sur le fonctionnement et
l’entretien accompagne ce produit.
IMPORTANT SAFETY INSTRUCTIONS
20080814_Installer800
1) Read these instructions.
Power Source Warning
2) Keep these instructions.
A label on this product indicates the correct power source for this
product. Operate this product only from an electrical outlet with the
voltage and frequency indicated on the product label. If you are
uncertain of the type of power supply to your home or business,
consult your service provider or your local power company.
The AC inlet on the unit must remain accessible and operable at
all times.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than
the other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12)
Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from
tip-over.
Ground the Product
WARNING: Avoid electric shock and fire hazard! If this
product connects to cable wiring, be sure the cable system
is grounded (earthed). Grounding provides some protection
against voltage surges and built-up static charges.
Protect the Product from Lightning
In addition to disconnecting the AC power from the wall outlet,
disconnect the signal inputs.
Verify the Power Source from the
On/Off Power Light
When the on/off power light is not illuminated, the apparatus may
still be connected to the power source. The light may go out when
the apparatus is turned off, regardless of whether it is still plugged
into an AC power source.
Eliminate AC Mains Overloads
13) Unplug this apparatus during lightning storms or when unused
for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as a power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
WARNING: Avoid electric shock and fire hazard! Do
not overload AC mains, outlets, extension cords, or integral
convenience receptacles. For products that require battery
power or other power sources to operate them, refer to the
operating instructions for those products.
IMPORTANT SAFETY INSTRUCTIONS,
continued
2-23-11 Draft
Handling Disposable Batteries
This product may contain disposable batteries. Heed the following
warning and follow the Battery Safety and Battery Disposal
instructions below.
WARNING: There is danger of explosion if the battery
is mishandled or incorrectly replaced. Replace only with
the same type of battery. Do not disassemble it or attempt
to recharge it outside the system. Do not crush, puncture,
dispose of in fire, short the external contacts, or expose to
water or other liquids. Dispose of the battery in accordance
with local regulations and instructions from your service
provider.
Battery Safety
• Insert batteries correctly. There may be a risk of explosion if the
batteries are incorrectly inserted.
• Do not attempt to recharge ‘disposable’ or ‘non-reusable’ batteries.
• Please follow instructions provided for charging ‘rechargeable’
batteries.
• Replace batteries with the same or equivalent type that we
recommend.
• Do not expose batteries to excessive heat (such as sunlight or fire).
• Do not expose batteries to temperatures above 100°C (212°F).
Battery Disposal
• The batteries may contain substances that could be harmful to
the environment.
• Recycle or dispose of batteries in accordance with the battery
manufacturer’s instructions and local/national disposal and
recycling regulations.
•
The batteries may contain perchlorate, a known hazardous
substance, so special handling and disposal of this product might
be necessary. For more information about perchlorate and best
management practices for perchlorate-containing substance, see
www.dtsc.ca.gov/hazardouswaste/perchlorate
Provide Ventilation and
Select a Location
•
•
•
•
•
•
Protect from Exposure to Moisture
and Foreign Objects
WARNING: Avoid electric shock and fire hazard! Do
not expose this product to dripping or splashing liquids,
rain, or moisture. Objects filled with liquids, such as vases,
should not be placed on this apparatus.
WARNING: Avoid electric shock and fire hazard!
Unplug this product before cleaning. Do not use a liquid
cleaner or an aerosol cleaner. Do not use a magnetic/static
cleaning device (dust remover) to clean this product.
WARNING: Avoid electric shock and fire hazard! Never
push objects through the openings in this product. Foreign
objects can cause electrical shorts that can result in electric
shock or fire.
Service Warnings
WARNING: Avoid electric shock! Do not open
the cover of this product. Opening or removing the cover
may expose you to dangerous voltages. If you open the
cover, your warranty will be void. This product contains no
user-serviceable parts.
Check Product Safety
Upon completion of any service or repairs to this product, the service
technician must perform safety checks to determine that this product
is in proper operating condition.
Protect the Product When Moving It
Always disconnect the power source when moving the apparatus or
connecting or disconnecting cables.
20090915_IP_NoTuner_Safety
Remove all packaging material before applying power to the
product.
Do not place this apparatus on a bed, sofa, rug, or similar
surface.
Do not place this apparatus on an unstable surface.
Do not install this apparatus in an enclosure, such as a bookcase
or rack, unless the installation provides proper ventilation.
Do not place entertainment devices (such as VCRs or DVDs),
lamps, books, vases with liquids, or other objects on top of this
product.
Do not block ventilation openings.
2-23-11 Draft
Change the Way You Watch 2-23-11
TV Draft
Welcome to U-verse TV. The ISB7005 devices, known as U-verse receivers, bring a rich, new set of
interactive services directly to you through your TV and your in-home IP network. The receiver uses
wireless technology 802.11n to connect to the network.
The ISB7005 receiver allows for easy and secure connection to U-verse services. The signal strength
indicator on the front panel of the receiver identifies the strength of the wireless connection and aids
in the proper placement of the receiver.
What’s In the Carton?
In addition to this installation manual, the receiver carton contains the following items:
•
An ISB7005 Receiver - A wireless receiver
•
A power cord and power adapter
Other equipment may be required.
Safety First
Before using the receiver, read the Important Safety Instructions section of this manual.
Identify Your Receiver with the Serial Number
At times your service provider may ask for the serial number. To find the serial number for your
receiver, look on the bottom of the receiver for the label. The serial number is a 9-digit numeric code
to the right of the letters “S/N” on the label.
Use the space provided here to record the serial number: _________________________________
In This Manual
This manual covers the information you need to connect your receiver to both your in-home IP network
and your entertainment system. The manual also outlines certain safeguards and installation information.
The safety information contained in this manual was developed and provided solely by the receiver
manufacturer, Cisco Systems, Inc.
Questions About Your Service
For questions about how to operate your receiver, once installed, refer to your Feature Guide available
for download at: uverse.att.com/support. For all other questions about your TV service, contact your
service provider.
Protecting You and the Environment
Cisco addresses the environmental impact of networking products throughout their lifecycle, from product
development, manufacturing, and use to service and end-of-life. Integrating environmental policies into
Cisco engineering and manufacturing practices results in socially accountable business practices that help
reduce the environmental impact associated with networking products.
Front Panel
2-23-11 Draft
POWER
LINK
HD
RECORD
MENU
OK
ISB7005
1 Power
10
11
T14820
Turns the receiver on or places it in standby. To restart the receiver,
press and hold the POWER button for 10 seconds. The LED is green
2 Model Number
Identifies the model number of your receiver as ISB7005
3 Signal Strength
Indicator
Identifies the strength of the wireless connection
4 Link
Indicates network link status. The LED is green
5 HD
Indicates the set-top is set to a resolution of 720p, 1080i, or 1080p. The
LED is blue
6 Record
Indicates that a recording is in progress. The LED is red
7 IR Sensor
Receives the infrared signal from the remote control. The sensor is
behind the front panel
8 Menu
Accesses the on-screen menu
9 Arrow Keys
Accesses on-screen services (such as the on-screen guide, video-ondemand, or pay-per-view) and navigates menus
10 OK
Selects the current item
11 USB Port
USB connector. (Reserved for future use)
Note: This illustration may vary from the actual product.
Back Panel
2-23-11 Draft
Pb
TO TV
(VIDEO OUT)
NETWORK
T14821
Pr
S-VIDEO
VIDEO
OUT
AUDIO
OUT
OPTICAL
USB
POWER
10
1 To TV (Video Out)
Connect to TV. You must set the channel on your TV to the channel
designated by your service provider (usually channel 3). Contact your
service provider for the channel information
2 Network
Connect to the Ethernet (CAT-5) network at your home, if applicable
3 YPbPr
Connect the receiver to the component video input (YPbPr) on the
HDTV. See pages 11 and 12 for more information
4 S-Video
Connect an S-Video cable to send an S-Video signal to your TV, VCR, or
DVD recorder. This signal is standard-definition but higher quality than
other standard-definition TV connections. See page 12 for more
information
5 Video Out
Connect to composite input on your HDTV or SDTV
Note: Two video output connectors are provided. Typically, one output
is connected to the TV, and the other output is used to connect to a
home theater system, DVD recorder, or VCR
6 Audio Out (L/R)
Connect RCA-type cables to Audio Out to send analog audio signals
(left and right) to a TV with stereo inputs or to a stereo amplifier
Note: Two sets of audio out connectors are provided. Typically, one set
of outputs is connected to the TV, and the other set is used to connect
to a home theater system, DVD recorder, or VCR
7 Optical
Connect an optical cable to send a digital audio signal to a surroundsound receiver or other digital audio device
8 HDMI
Connect an HDTV HDMI™ (High-Definition Multimedia Interface) cable
from the HDTV to the HDMI port. HDMI supports both digital audio and
video. See page 11 for more information
9 USB Port
10 Power
USB connector. (Reserved for future use)
Connect the DC output of the AC power adapter (provided) to deliver
power to the receiver
Note: This illustration may vary from the actual product.
Connecting the Receiver
2-23-11 Draft
To connect your receiver to your network and home entertainment devices, complete these steps.
Because the connections
for a high-definition (HD)
16
or standard-definition (SD)
or
TV are different, you must
determine if your TV is HD
or SD. Your TV must
receive HD signals for
you to enjoy the benefits
of HDTV. Refer to the manual that came with your TV for more information.
See page 26 for more information on picture formats.
Make one of the following connections for your home network:
• If your home network uses coaxial cable, use the TO WALL connector on the
receiver. See page 11.
• If your home network uses twisted pair cable (phoneline wiring), use the TO
WALL connector on the receiver and an adapter that converts twisted pair to
coaxial. See page 11.
• If your home network uses Ethernet (CAT-5) cable, use the NETWORK connector
on the receiver. See page 11.
Make the connections for your TV, VCR, and DVD recorder as follows:

• If you are using an HDTV, see page 12 and the connection diagrams in this
manual.
• If you are using a standard-definition TV, see page 13 and the connection
diagrams in this manual.
• If you want to record some programs on VCR tape or DVD, see page 14
and the connection diagrams in this manual.
Identify the additional consumer
electronic devices you will
connect to the receiver and TV.
See pages 15 through 23 and
refer to the owner’s manual for
the device.
VCR
DVD
Other
Home Theater
Plug the receiver and the TV into an AC power source that is not controlled by a
switch. For further instructions on completing your setup, refer to the Feature
Guide available from your service provider.
10
ISB7005 Wireless Network Connection
2-23-11 Draft
The ISB7005 receiver allows for easy and secure connection to U-verse services. The signal strength
indicator on the front panel of the receiver identifies the strength of the wireless connection and aids
in the proper placement of the receiver.
POWER
LINK
HD
RECORD
MENU
OK
ISB7005
Signal Strength
Indicator
Wireless
LEDs
T14822
Receiver Operational Status
This indicates the wireless signal is excellent. The video quality is good.
This indicates the wireless signal is very good. The video quality is good.
This indicates the wireless signal is good. The video quality is good. You must obtain
three or more green bars at initial installation.
This indicates the wireless signal is fair. The video quality is good.
This indicates the wireless signal is weak. The video quality may be poor. The STB
should be re-oriented to achieve a better wireless signal.
This indicates the wireless signal is very weak. No video can be displayed. The receiver
must be re-oriented to achieve a better wireless signal.
This indicates the STB Ethernet port is connected with the residential gateway through
the Ethernet cable.
11
Connections for a High-Defi2-23-11
nitionDraft
TV (HDTV)
To use the receiver with an HDTV, you must make one of the following connections to view the HD
content. Refer to the owner’s manual for your TV and the cabling diagrams in this manual for more
detailed connection information.
Although all connections provide you with quality service, we list the connections in our recommended
order.
Notes:
• The labeling on your receiver or HDTV may vary slightly from the illustrations shown below.
• Some cables shown in the connection diagrams may not be included with this receiver.
• Set the HD mode and select the output video format (480i, 720p, 1080i, or 1080p) on the receiver
using the instructions provided in the Feature Guide available for download at: uverse.att.com/support
Receiver
Connections
Note: The DVI port on the TV must support
high-bandwidth digital content protection (HDCP).
See the connection diagram on page 16 for an
example.
YPbPr
The YPbPr (red, blue, and green) connectors
provide high-definition component video signals
to an HDTV, and a separate audio connection
(either L/R or optical audio).
See the connection diagram on page 17 for an
example.
Adapter Needed
DVI
AUDIO
OUT
Audio
The HDMI connector can provide the connection
to an HDTV with a DVI input. If your HDTV has a
Digital Visual Interface (DVI) connector, you need
an HDMI-to-DVI adapter, and a separate audio
connection (either L/R or optical audio).
Pb
Pb
Pr
AUDIO
OUT
Adapter Needed
AUDIO
OUT
12
Video
Pb
OPTICAL
INPUT
Audio
RGB
OPTICAL
Some HDTVs have only RGB or RGB-HV
connectors. If you have one of these HDTVs,
you need a Component-to-RGB adapter, and
you need a separate audio connection.
OPTICAL
INPUT
OPTICAL
Video
DVI
Note: The HDMI port on the TV must support
high-bandwidth digital content protection (HDCP).
Video
Audio/Video
Some HDTVs have a High-Definition Multimedia
Interface (HDMI) connector. The HDMI connector
provides both a digital video and audio connection.
See the connection diagram on page 15 for an
example.
HDTV
Connections
Audio
HDMI
Use One of These Required Connections
to an HDTV
Connections for a Standard-Defi
nition TV (SDTV)
2-23-11 Draft
When using the receiver with an SDTV, you must make one of the following connections to view
content. Some SDTVs may not have all these connections. Refer to the owner’s manual for your TV
and the cabling diagrams in this manual for more detailed information.
Although all connections provide you with quality service, we list the connections in our recommended
order.
Notes:
• The labeling on your receiver or SDTV may vary slightly from the illustrations shown below.
• Some cables shown in the connection diagrams may not be included with this receiver.
The YPbPr (red, blue, and green) connectors
can provide standard-definition component
video signals to an SDTV. A separate audio
connection is also needed.
Pb
Audio
Video Out
The Video Out connector provides a video
connection to an SDTV. A separate audio
connection is also needed.
See the connection diagram on page 20 for
an example.
VIDEO
OUT
AUDIO
OUT
The To TV (Video Out) connector provides both
a video and audio connection to an SDTV.
See the connection diagram on page 21 for
an example.
TO TV
(VIDEO OUT)
Video
Audio
S-VIDEO
Audio
See the connection diagram on page 19 for
an example.
AUDIO
OUT
Audio/Video
The S-Video connection provides an optimal
video connection to SDTVs. A separate audio
connection is also needed.
Video
Pb
Pr
AUDIO
OUT
To TV (Video Out)
SDTV
Connections
Pr
YPbPr
S-Video
Receiver
Connections
Video
Use One of These Required Connections
to an SDTV
S-VIDEO
IN
VIDEO
IN
CABLE IN/
ANT IN
13
Connections for a VCR or DVD
Recorder
2-23-11 Draft
When using the receiver with a VCR or DVD recorder, you must make one of the following
connections to view content.
Although all connections provide you with quality service, we list the connections in our recommended
order.
Notes:
• The labeling on your receiver, VCR, or DVD recorder may vary slightly from the illustrations shown
below.
• Some cables shown in the connection diagrams may not be included with this receiver.
AUDIO
OUT
For VCRs or DVD recorders with Video In and
Left and Right audio connectors, use the Video
Out and the Audio Out connectors (Left and
Right) on the receiver.
VIDEO
OUT
S-VIDEO
IN
VIDEO
IN
See the connection diagram on page 23 for an
example.
AUDIO
OUT
Audio
VCR/DVD Recorder
Video
S-VIDEO
VCR/DVD Recorder
Connections
Audio
For VCRs or DVD recorders with S-Video In
and Left and Right audio connectors, use the
S-Video and the Audio Out Left and Right
connectors on the receiver.
Receiver
Connections
Video
Use One of These Optional Connections
to a VCR or DVD Recorder
Connecting an Over-the-Air Converter Box
You can connect an over-the-air converter box directly to your TV to receive certain local channels,
but do not connect the over-the-air converter box directly to your receiver.
14
Connecting to an HDTV with2-23-11
an HDMI
Connector
Draft
Cable Used in this Configuration
• 1 HDMI Cable
Notes:
• The HDMI port on the TV must support high-bandwidth digital content protection (HDCP).
• The HDMI interface supports Dolby™ Digital 5.1 audio.
WARNING:
Electric shock hazard! Unplug all electronic devices before connecting or
disconnecting any device cables to the receiver.
Receiver
Pb
TO TV
(VIDEO OUT)
Pr
NETWORK
VIDEO
OUT
S-VIDEO
OPTICAL
AUDIO
OUT
USB
POWER
Back of HDTV
AUDIO
CENTER
CHANNEL IN
ON
HDMI
OFF
AUDIO IN
DVI/HDCP
S-VIDEO
ANT (75 )
VIDEO
VIDEO
L/
MONO
AUDIO
PB
PR
AUDIO
L/
MONO
PB
PR
AUDIO
ANT-1
OUT
HD 1
IN
HD 2
IN
OUT
IN
ANT-2
T14823
15
Connecting to an HDTV with2-23-11
a DVIDraft
Connector
Cables Used in this Configuration
• 1 HDMI-to-DVI Cable or 1 HDMI Cable and 1 HDMI-to-DVI Adapter
• 1 Audio Left/Right Cable (You can also use an optical cable [indicated by the dotted line]
instead of the Audio Left/Right Cable as shown in the diagram, dependent upon your TV’s
capabilities.)
Notes:
• The DVI port on the TV must support high-bandwidth digital content protection (HDCP).
• When you connect the HDMI connector to the DVI connector on your HDTV, you need an
HDMI-to-DVI adapter and a separate audio connection.
WARNING:
Electric shock hazard! Unplug all electronic devices before connecting or
disconnecting any device cables to the receiver.
Receiver
Pb
TO TV
(VIDEO OUT)
Pr
NETWORK
S-VIDEO
VIDEO
OUT
OPTICAL
AUDIO
OUT
USB
POWER
OR
Back of HDTV
AUDIO
CENTER
CHANNEL IN
ON
DVI/HDCP
IN
OFF
AUDIO IN
DVI/HDCP
S-VIDEO
OPTICAL
INPUT
ANT (75 )
VIDEO
VIDEO
L/
MONO
AUDIO
PB
PR
AUDIO
L/
MONO
PB
PR
AUDIO
ANT-1
OUT
HD 1
IN
HD 2
IN
OUT
IN
ANT-2
T14824
16
Connecting to an HDTV with2-23-11
Component
(YPbPr) Connectors
Draft
Cables Used in this Configuration
• 1 Component Video Cable (YPbPr)
• 1 Audio Left/Right Cable (You can also use an optical cable [indicated by the dotted line]
instead of the Audio Left/Right Cable as shown in the diagram, dependent upon your TV’s
capabilities.)
WARNING:
Electric shock hazard! Unplug all electronic devices before connecting or
disconnecting any device cables to the receiver.
Receiver
Pb
TO TV
(VIDEO OUT)
Pr
NETWORK
VIDEO
OUT
S-VIDEO
OPTICAL
AUDIO
OUT
USB
POWER
OR
Back of
HDTV
AUDIO
CENTER
CHANNEL IN
ON
HDMI
OFF
AUDIO IN
DVI/HDCP
S-VIDEO
OPTICAL
INPUT
ANT (75 )
VIDEO
VIDEO
L/
MONO
AUDIO
PB
PR
AUDIO
L/
MONO
PB
PR
AUDIO
ANT-1
OUT
HD 2
HD 1
IN
IN
OUT
IN
ANT-2
T14825
17
Connecting to an SDTV with2-23-11
Component
(YPbPr) Connectors
Draft
Cables Used in this Configuration
• 1 Component Video Cable (YPbPr)
• 1 Audio Left/Right Cable
Note: The receiver must be set to the proper standard-definition mode.
WARNING:
Electric shock hazard! Unplug all electronic devices before connecting or
disconnecting any device cables to the receiver.
Receiver
Pb
TO TV
(VIDEO OUT)
NETWORK
Pr
S-VIDEO
VIDEO
OUT
OPTICAL
AUDIO
OUT
USB
POWER
Back of SDTV
CABLE IN/
ANT IN
PB
PR
T14826
18
VIDEO
IN
AUDIO
IN
VIDEO
OUT
AUDIO
OUT
CABLE OUT/
ANT OUT
Connecting to an SDTV with2-23-11
an S-Video
Connector
Draft
Cables Used in this Configuration
• 1 S-Video Cable
• 1 Audio Left/Right Cable
WARNING:
Electric shock hazard! Unplug all electronic devices before connecting or
disconnecting any device cables to the receiver.
Receiver
Pb
TO TV
(VIDEO OUT)
NETWORK
Pr
S-VIDEO
VIDEO
OUT
OPTICAL
AUDIO
OUT
USB
POWER
Back of SDTV
CABLE IN/
ANT IN
S-VIDEO
IN
VIDEO
IN
AUDIO
IN
VIDEO
OUT
AUDIO
OUT
CABLE OUT/
ANT OUT
T14827
19
Connecting to an SDTV with2-23-11
an RCA-Type
Connector
Draft
Cables Used in this Configuration
• 1 RCA-type Video Cable
• 1 Audio Left/Right Cable
WARNING:
Electric shock hazard! Unplug all electronic devices before connecting or
disconnecting any device cables to the receiver.
Receiver
Pb
TO TV
(VIDEO OUT)
NETWORK
Pr
S-VIDEO
VIDEO
OUT
AUDIO
OUT
OPTICAL
USB
POWER
Back of SDTV
CABLE IN/
ANT IN
PB
PR
T14828
20
VIDEO
IN
AUDIO
IN
VIDEO
OUT
AUDIO
OUT
CABLE OUT/
ANT OUT
Connecting to an SDTV with2-23-11
a Coaxial
Cable
Draft
Cable Used in this Configuration
• 1 Coaxial Cable
Note: You must set the channel on your TV to the channel designated by your service provider
(usually channel 3). Contact your service provider for the channel information.
WARNING:
Electric shock hazard! Unplug all electronic devices before connecting or
disconnecting any device cables to the receiver.
Receiver
Pb
TO TV
(VIDEO OUT)
Pr
NETWORK
S-VIDEO
VIDEO
OUT
OPTICAL
AUDIO
OUT
USB
POWER
Coaxial
Cable
Back of SDTV
CABLE IN/
ANT IN
PB
PR
VIDEO
IN
AUDIO
IN
VIDEO
OUT
AUDIO
OUT
CABLE OUT/
ANT OUT
T14829
21
Connecting to a Home Theater
System
2-23-11 Draft
with Component (YPbPr) Connectors
Cables Used in this Configuration
• 1 Component Video Cable (YPbPr)
• 1 Audio Left/Right Cable (You can also use an optical cable [indicated by the dotted line] instead
of the Audio Left/Right Cable as shown in the diagram.)
Notes:
• This connection requires that audio is provided by the home theater system.
• Consult the user guide that came with your home theater system for information on connecting your
other video and audio devices.
Contact AT&T ConnecTech® service to learn about affordable flat-rate home theater installation services.
Call (800) 344-1734 to speak with an AT&T ConnecTech Representative. (Not available in all areas; See
offers and terms & conditions at www.att.com/ConnecTech).
WARNING:
Electric shock hazard! Unplug all electronic devices before connecting or
disconnecting any device cables to the receiver.
Receiver
Pb
TO TV
(VIDEO OUT)
Pr
NETWORK
VIDEO
OUT
S-VIDEO
OPTICAL
AUDIO
OUT
USB
POWER
OR
Back of Home
Theater Receiver
DIGITAL
AUDIO
TV/CABLE
DVD
VIDEO 1
COMPONENT VIDEO
PB
PB
PB
PR
PR
PR
MONITOR
S-VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
VIDEO
VIDEO
VIDEO
VIDEO
S-VIDEO
OUT
AUDIO
AUDIO
AUDIO
AUDIO
22
IN
OUT
IN
OUT
VIDEO OUT
T14830
Connecting to a Stereo VCR2-23-11
or DVD
Recorder (optional)
Draft
The diagram below shows how to connect a recording device to your receiver. Although it is possible
to watch TV using a connection through your VCR or DVD recorder to the TV, this connection may not
provide the best picture, and HDTV users are restricted to an SD format. In addition, some content
is copy protected and passing this content through the recording device may result in a picture that
cannot be viewed.
For these reasons, the connection shown is best used to provide only video and audio to your recording
device and not for normal TV viewing. The connection from the recording device to the TV (only used
for playback of recorded material) depends on the type of device being used, the outputs that are
supported, and the inputs that remain available for use on your TV.
Consult the owner’s manuals provided with your TV and recording device for more details on
connection options.
Cables Used in this Configuration
• 1 RCA-type Video Cable
• 1 Set Audio Left/Right Cables
WARNING:
Electric shock hazard! Unplug all electronic devices before connecting or
disconnecting any device cables to the receiver.
Connecting your TV directly to the Audio/Video output of your receiver will
assure a more vivid picture and enhance your viewing enjoyment.
Receiver
Pb
TO TV
(VIDEO OUT)
NETWORK
Pr
S-VIDEO
VIDEO
OUT
AUDIO
OUT
OPTICAL
USB
POWER
Back of Stereo VCR
or DVD Recorder
CABLE IN/
ANT IN
VIDEO
IN
AUDIO
IN
VIDEO
OUT
AUDIO
OUT
CABLE OUT/
ANT OUT
T14831
23
Troubleshooting
2-23-11 Draft
If the receiver does not perform as expected, the following tips may help. If you need further
assistance, contact your service provider.
No Picture
•
Verify that the power to your TV is turned on.
•
If the receiver is plugged into a wall switch, verify that the switch is in the ON position.
•
Verify that all cables are properly connected.
•
If your system includes a VCR, DVD recorder, or stereo, verify that you have properly connected
the device to the receiver.
•
Verify that you are using the proper input selection to the home theater receiver or TV.
•
Verify that the receiver is set to the proper screen type and resolution.
•
If you are using coaxial cable to connect to your TV, verify that the TV is tuned to the channel
designated by your service provider (usually channel 3). Contact your service provider for the
channel information.
No Color or Incorrect Color
•
Verify that the current TV program is broadcast in color.
•
Adjust the TV color controls.
•
If you are using a component video connection (YPbPr), check that all connectors are completely
and properly plugged into the receiver and TV.
•
If you are using a component video connection (YPbPr) and your HDTV has only RGB or RGB-HV
connectors, you must use an adapter. You can obtain the adapter through an electronic parts
retailer.
No Sound
•
If your setup includes a VCR, DVD recorder, or stereo, verify that you have properly connected
the device to the receiver.
•
Verify that the volume is turned up.
•
Verify that the mute function is not on.
•
Verify the proper input selection to the home theater receiver or TV.
•
If you are using coaxial cable to connect to your TV, verify that the TV is tuned to the correct channel.
Avoid Screen Burn-In
Images such as letterbox bars or side bars, bright closed-captioning backgrounds, station logos, or any
other stationary images may cause the display in your HDTV to age unevenly; this is known as
screen burn-in. Refer to the owner’s manual that came with your HDTV for more information.
CAUTION:
Avoid screen burn-in.
Do not display the same fixed images on your HDTV screen for extended periods
of time.
24
Frequently Asked Questions2-23-11 Draft
What Is Digital Television?
Digital television (DTV) is a huge leap forward in television technology compared to analog television
that has been widely available since the 1940s. DTV is delivered and displayed using digital encoding,
similar to the way a PC operates. By using digital technology, there is no variation in picture and
sound quality from the origination point until it is displayed on your television. You always receive
a high-quality picture without the wavy lines or static you might sometimes get from a weak analog
signal. Another feature of digital television is digital surround sound using Dolby Digital technology,
which is the same technology used to produce the sound you hear in movie theaters.
What Is Standard-Definition Television?
Standard-definition television (SDTV) is basic digital television programming delivered by your service
provider. Typically, the SDTV screen is the same, nearly square shape as an analog television
screen. Digital images on an SDTV set are crisp and clear—noticeably better than on a standard
analog television set using an antenna to receive over-the-air signals.
What Is High-Definition Television?
High-definition television (HDTV) is a completely new way to send and receive television broadcast
signals. HDTV images are made up of pixels that are much smaller and closer together than those
used in standard analog television, and there are millions of them. Thus, HDTV can display five to six
times the detail of analog television to deliver picture quality that is much more realistic, dimensional,
and precise. SDTV programs can be viewed on an HDTV.
Are Local TV Stations or Other Programmers Broadcasting in HDTV?
Many local TV stations and programmers are transmitting digital signals. However, transmitting a
digital signal does not mean transmitting an HDTV signal. Some stations are using the new bandwidth
to broadcast several standard-definition channels. Most stations and programmers, once they begin
broadcasting in digital, are offering HD content from their parent network (for example, CBS, ABC,
NBC, Fox, and PBS). Contact your service provider for more information.
Why Aren’t All the Shows I Watch in High-Definition?
A high-definition program must originate in HD format and be broadcast in HD format. Having an
HDTV system does not mean that everything you watch will be viewed in high-definition. Getting the
signal from a digital source also does not mean it is high-definition.
Why Are Some HDTVs 4:3 Aspect Ratio and Others 16:9?
The aspect ratios differ because television manufacturers build both standard-screen and widescreen HDTVs to appeal to consumer viewing preferences. The two aspect ratios are as follows:
•
On standard-screen (4:3) HDTVs, the programming is displayed in letterbox format in the middle
of the screen. There are bars surrounding the picture.
•
On wide-screen (16:9) HDTVs, the programming is displayed on the full screen.
What Is HDMI and Does it Support Dolby Digital 5.1 Audio?
The High-Definition Multimedia Interface (HDMI) is an uncompressed, all-digital audio/video interface.
The Dolby Digital audio format that provides up to 5.1 separate channels of surround sound, and is
the standard used for DVD-Video. HDMI supports standard, enhanced, or high-definition video, plus
multi-channel digital audio, such as Dolby Digital audio, on a single cable.
25
Picture Formats
2-23-11 Draft
What Is the Difference Between a Standard-Screen and a Wide-Screen HDTV?
The type of screen your HDTV has (wide-screen or standard-screen) determines how the receiver
displays programs on the screen. The picture format for an HDTV is a combination of aspect ratio
and screen resolution and is different for standard-screen and wide-screen HDTVs.
What Is Aspect Ratio?
An aspect ratio is the ratio of the width to the height of the TV screen. The aspect ratios differ
because the television industry manufactures both standard-screen and wide-screen HDTVs to
appeal to consumer viewing preferences.
What Is the Screen Resolution?
The screen resolution indicates the amount of detail that the picture displays. Resolution is identified
by the number of display lines on the screen. The techniques that an HDTV uses to “paint” the picture
on the screen are referred to as progressive and interlaced.
With the progressive scanning method, the lines are drawn on the screen one at a time in sequential
order. Progressive scanning results in a more detailed image on the screen and is also less susceptible
to the flicker commonly associated with interlaced scanning. The interlaced method involves refreshing
pixels in alternation — first the odd lines and then the even lines.
For advanced setup, select the screen resolution that your TV can support. Refer to your Feature
Guide and HDTV owner’s manuals to choose the proper screen resolution (480i, 720p, 1080i, or
1080p) for your setup.
For example, a screen resolution of 1080i indicates that the screen shows 1080 lines in an interlaced
display, and 720p indicates that the screens shows 720 lines in a progressive display.
A standard-screen HDTV has a 4x3
aspect ratio. The screen is 4 units wide
for every 3 units tall.
A wide-screen HDTV is one-third wider than
a standard-screen HDTV. The screen is 16
units wide for every 9 units tall.
16
A screen resolution of 480i fills the
screen.
26
A screen resolution of 720p, 1080i, or
1080p fills the screen.
Index
2-23-11 Draft
Connection
AC Power input
Arrow keys
Aspect ratio
26
Audio Out
Coaxial Network 11
Consumer electronic devices
Controls
9, 12, 13, 14
10
See Front panel
DC Power output
Back panel
Diagrams. See Connecting the receiver
to other devices
Burn-in of screen
Buttons
24
Digital Video Recorder. See DVR
See Front Panel
Digital TV, What is it
DVD Connection
Cables
9, 10, 11, 15-23
DVI connector
CAT-5
See Ethernet
DVR
Coaxial Cable Input
9, 10, 11, 21
Coaxial network connection
Compliance, FCC
25
9, 14, 23
12, 16
11
Ethernet
29
9, 10, 11
eSATA port
Component video connection. See YPbPr
Connectors
See also Front panel; Back panel
FAQs
DVD recorder
14
25
FCC compliance
29
required for HDTV
12
Formats, picture
26
required for SDTV
13
Frequently Asked Questions. See FAQs
VCR
14
Front panel
Connecting the receiver to other devices
DVD recorder
9, 14, 23
Hard disk drive, Caution
HDTV with Component input
(YPbPr) 17
HDTV with DVI connector
format
12, 15
SDTV with Component input (YPbPr)
SDTV with an S-Video connector
SDTV with an RCA-type connector
VCR
9, 14, 23
21
25
HDTV broadcasting
HDTV, what is it
Home Theater System with Component input
(YPbPr) 22
SDTV with Coaxial cable
HD
12, 16
HDTV with HDMI connector
18
19
20
indicator
HDMI
25
25
9, 12, 15
High-definition
See HD
Home theater system connection
22
Interlaced screen resolution
IR sensor
26
27
Index, continued
2-23-11 Draft
Keys. See Front panel
To Wall (Video In) connector
To TV (Video Out) connector
Network
Troubleshooting
9, 10, 11
9, 10, 11
9, 13, 21
24
TV
digital, what is it
Optical Audio Output
9, 12, 16, 17, 22
Over-the-air converter box
formats
14
25
26
HDTV, what is it
25
programming
Picture formats
recording
Ports. See Connectors
resolution
26
Power
screen size. See aspect ratio
26
8, 9
Programs, view
standard-screen
25
Progressive screen resolution
standard-definition
26
wide-screen
Record programs
RGB connector
25
10, 13, 18, 19, 20, 21, 25
26
USB port
12, 24
8, 9
S-Video Out
VCR connection
9, 13, 14
9, 14, 23
S-Video In
13, 14
Video In. See To Wall
Safety
4, 5
Video Out. See To TV
Scan rates. See screen resolution
Screen
burn-in
size
View programs
25
24
resolution
Wide-screen TV
26
26
26
YPbPr
SD
Connections
TV, What is it
10, 13, 18, 19, 20, 21
connector
25
HDTV connection 12, 17
Serial number, locating
Sound, performance
Standard-definition TV
Standard-screen TV
28
26
24
10, 13, 18, 19, 20, 21, 25
26
9, 12, 13, 17, 18, 22
home theater connection
SDTV connection
13, 18
22
Compliance Information
United States FCC Compliance
AVC VIDEO LICENSE
2-23-11 Draft
With respect to each AVC/H.264 product, we are obligated to provide
This device has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
such interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy. If not
installed and used in accordance with the instructions, it may
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment OFF and ON, the user is encouraged to try to
correct the interference by one or more of the following measures:
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the service provider or an experienced radio/television
technician for help.
Any changes or modifications not expressly approved by
Cisco Systems, Inc., could void the user’s authority to operate
the equipment.
The information shown in the FCC Declaration of Conformity
paragraph below is a requirement of the FCC and is intended to
supply you with information regarding the FCC approval of this
device. The phone numbers listed are for FCC-related questions only
and not intended for questions regarding the connection or operation
for this device. Please contact your service provider for any questions
you may have regarding the operation or installation of this device.
FCC Declaration of Conformity
the following notice:
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO
LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES
IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO
IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii)
DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED
IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO
PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED
OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION
MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.
COM.
Accordingly, please be advised that service providers, content
providers, and broadcasters may be required to obtain a separate
use license from MPEG LA prior to any use of AVC/H.264 encoders
and/or decoders.
ENERGY STAR® Notice
Cisco has tested and confirmed that the ISB7005 set-top models
meet the Tier 1 Energy Efficiency and Power Management Criteria
specified in the ENERGY STAR Program Requirements for Set-top
Boxes Version 2.0.
Macrovision Copyright Notice
This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by
Macrovision, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
Trademarks
This device complies with Part 15 of FCC Rules. Operation is
subject to the following two conditions: 1) the device may not
cause harmful interference, and 2) the device must accept any
interference received, including interference that may cause
undesired operation.
Cisco and the Cisco logo are trademarks or registered trademarks
of Cisco and/or its affiliates in the U.S. and other countries. A listing
of Cisco’s trademarks can be found at www.cisco.com/go/
trademarks.
ISB7005 Receiver
Models ISB7005
Manufactured by: Cisco Systems, Inc.
5030 Sugarloaf Parkway
Lawrenceville, Georgia 30044 USA
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
Telephone: 770 236-1077
AT&T, the AT&T logo, ConnecTech and U-verse are registered
trademarks or trademarks of AT&T Knowledge Ventures.
ENERGY STAR and the ENERGY STAR mark are registered
trademarks of the U.S. government.
HDMI, the HDMI logo, and High-Definition Multimedia Interface
are registered trademarks or trademarks of HDMI Licensing LLC
in the United States and other countries.
Canada EMI Regulation
Other third party trademarks mentioned are the property of their
respective owners.
This Class B digital apparatus complies with Canadian ICES-003.
The use of the word partner does not imply a partnership relationship
between Cisco and any other company. (1009R)
Cet appareil numérique de la class B est conforme à la norme
NMB-003 du Canada.
20081121 FCC Standard
Disclaimer
Cisco Systems, Inc. assumes no responsibility for errors or
omissions that may appear in this manual. We reserve the right to
change this manual at any time without notice.
29
Federal Communication Commission Interference Statement
2-23-11
Draft
This equipment has been tested and found to comply
with the
limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
For operation within 5150-5250MHz and 5470-5725MHz frequency range, it is restricted to indoor environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
IMPORTANT NOTE:
FCC RF Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The availability of some specific channels and/or operational frequency bands are country dependent and are
firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the
end user.
ISB7005 with PCB antenna and max. antenna gain is 5.48 dBi in 5G.
Industry Canada Statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Caution:
The device for the band 5150-5250MHz and 5470-5725MHz is only for indoor usage to reduce potential for harmful
interference to co-channel mobile satellite systems.
The maximum antenna gain permitted (for devices in the bands 5250-5725 MHz (5.48 dBi) to comply with the e.i.r.p.
limit; and
The maximum antenna gain permitted (for devices in the band 5725-5825 MHz (5.48 dBi)) to comply with the e.i.r.p.
limits specified for point-to-point and non point-to-point operation as appropriate, as stated in section A9.2(3).
High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850
MHz and these radars could cause interference and/or damage to LE-LAN devices.
IMPORTANT NOTE:
Canada RF Exposure Statement:
This system has been evaluated for radiofrequency exposure for humans in reference to Canada Health Code 6
(2009) limits. The evaluation was based on evaluation per RSS-102 Rev 4. The minimum separation distance from
the antenna to general bystander is 7.9 inches (20cm) to maintain compliance.
Note: The ISB7005 has disabled the 5600-5650M band by S/W to avoid 5600-5650M band for IC certification.
30
2-23-11 Draft
31
2-23-11 Draft
Cisco Systems, Inc.
5030 Sugarloaf Parkway, Box 465447
Lawrenceville, GA 30042
678 277-1120
800 722-2009
www.cisco.com
© 2011 Cisco and/or its affiliates. All rights reserved.
February 2011
4024566 Rev A

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : 3.1-701
Create Date                     : 2011:02:23 14:02:48-05:00
Modify Date                     : 2011:02:24 15:09:07+08:00
Metadata Date                   : 2011:02:24 15:09:07+08:00
Producer                        : Acrobat Distiller 9.4.0 (Macintosh)
Format                          : application/pdf
Title                           : untitled
Document ID                     : uuid:d42b1fc5-e8e6-c847-8078-b987f22c289b
Instance ID                     : uuid:b98de2e9-4bc7-45b0-9840-35959ca6a265
Has XFA                         : No
Page Count                      : 32

EXIF Metadata provided by EXIF.tools