GemTek Technology U940829G Wireless Printer Adapter User Manual

Gemtek Technology Co., Ltd. Wireless Printer Adapter Users Manual

a href="https://usermanual.wiki/GemTek-Technology" itemprop="url"> GemTek Technology >

Users Manual

EnFor Your SafetyTo prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entiretybefore using this equipment. Keep these safety instructions where all those who use the product will read them.The consequences that could result from failure to observe the precautions listed in this section are indicated by the following symbol:WARNINGSThis icon marks warnings, information that should be read before using this product to prevent possible injury.Turn off immediately in the event of malfunctionShould you notice smoke or an unusual smell coming from thePD-10, unplug the USB connector from printer and remove thebattery immediately, taking care to avoid burns. Then take theequipment to a Nikon-authorized service representative for in-spection. Continued operation could result in injury.Do not disassembleTouching the internal parts of the product could result in injury.Repairs should be performed only by qualified technicians.Should the product break open as the result of a fall or other ac-cident, take the product to a Nikon-authorized service represen-tative for inspection after unplugging the product and/orremoving the batteries.Do not use in the presence of flammable gasDo not use electronic equipment in the presence of flammablegas, as this could result in explosion or fire.Keep dryDo not immerse in or expose to water. Continuing to use the prod-uct under such circumstances may cause fire or an electric shock.Keep out of reach of childrenFailure to observe this precaution could result in injury.Remove the batteries if the product will not be used forlong periodsFailure to observe this precaution could result in leakage, whichmay cause fire, injury, or contamination of surroundings.Follow the instructions of hospital and airline personnelThis device emits radio frequency radiation that could interferewith medical or navigational equipment. Do not use this devicein a hospital or on board an airplane without first obtaining thepermission of hospital or airline staff.Follow the warnings on the batteriesFailure to observe this precaution could result in leakage, rupture,or fire.en_pd10.book Page 0 Monday, September 12, 2005 12:43 PM
iEnNotices• No part of the manuals included with this product may be reproduced,transmitted, transcribed, stored in a retrieval system, or translated intoany language in any form, by any means, without Nikon’s prior writtenpermission.• Nikon reserves the right to change the specifications of the hardwareand software described in these manuals at any time and without priornotice.• Nikon will not be held liable for any damages resulting from the use ofthis product.• While every effort has been made to ensure that the information inthese manuals is accurate and complete, we would appreciate it wereyou to bring any errors or omissions to the attention of the Nikon rep-resentative in your area (address provided separately).Notice for customers in the U.S.A.Federal Communications Commission (FCC)Declaration of ConformityThis device complies with Part 15 of the FCC rules. Operation of the de-vice is subject to the following two conditions: (1) this device may notcause harmful interference, and (2) this device must accept any interfer-ence received, including interference that may cause undesired operation.Products that contain a radio transmitter are labeled with FCC ID and mayalso carry the FCC logo.Federal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to Part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmful interfer-ence in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accor-dance with the instructions, may cause harmful interference to radio com-munications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful in-terference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correctthe interference by one of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.en_pd10.book Page i Monday, September 12, 2005 12:43 PM
iiEnThis device complies with Part 15 of the FCC Rules. Operation is subjectto the following two conditions: (1) This device may not cause harmful in-terference, and (2) this device must accept any interference received, in-cluding interference that may cause undesired operation.FCC Caution: Any changes or modifications not expressly approved by theparty responsible for compliance could void the user's authority to oper-ate this equipment.IMPORTANT NOTE:FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth foran uncontrolled environment. This equipment should be installed and op-erated with minimum distance 20cm between the radiator & your body.This transmitter must not be co-located or operating in conjunction withany other antenna or transmitter.Nikon Corporation declares that the Wireless Printer AdapterPD-10 ( FCC ID: MXF-U940829G) is limited in CH1~CH11 for 2.4 GHzby specified firmware controlled in U.S.A.Notice for customers in the State of CaliforniaWARNING: Handling the cord on this product will expose you to lead, achemical known to the State of California to cause birth defects or otherreproductive harm. Wash hands after handling.Nikon Inc.,1300 Walt Whitman Road, Melville, New York 11747-3064, U.S.A.Tel.: 631-547-4200Notice for customers in CanadaCAUTIONThis class B digital apparatus meets all requirements of the Canadian In-terference Causing Equipment Regulations.RSS-210 14. Exposure of Humans to RF FieldsThe installer of this radio equipment must ensure that the antenna is lo-cated or pointed such that it does not emit RF field in excess of HealthCanada limits for the general population; consult Safety Code 6, obtain-able from Health Canada’s website:www.hc-sc.gc.ca/rpbATTENTIONCet appareil numéique de la classe B respecte toutes les exigences du Rè-glement sur le matériel brouilleur du Canada.IC statementOperation is subject to the following two conditions:1) This device may not cause interference and2) This device must accept any interference, including interference thatmay cause undesired operation of the device.en00_pd10_7.fm Page ii Monday, September 12, 2005 2:35 PM
Download:
Mirror Download [FCC.gov]
Document ID585372
Application IDgwIVaEl8lHUoN/972qf8Lw==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize48.38kB (604710 bits)
Date Submitted2005-09-23 00:00:00
Date Available2005-09-23 00:00:00
Creation Date2005-09-12 03:43:42
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2005-09-20 17:24:42
Document TitleUsers Manual
FCC ID Filing: MXF-U940829G

Navigation menu