GemTek Technology WIXFMM-121 4G WiFi Spot User Manual WiMAXWi Fi Portable Router UG V1 0
Gemtek Technology Co., Ltd. 4G WiFi Spot WiMAXWi Fi Portable Router UG V1 0
User manual
Gemtek 4G Wi-Fi Spot
User Manual
Gemtek 4G Wi-Fi Spot
1
Copyright
CopyrightCopyright
Copyright
This DOCUMENT is copyrighted with all rights reserved. No part of this publication may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language in any form by any means without the written permission of Gemtek
Technology Co. Ltd.
Notice
NoticeNotice
Notice
Gemtek reserves the right to change specifications without prior notice.
While the information in this document has been compiled with great care, it may not be deemed an assurance of product
characteristics. Gemtek shall be liable only to the degree specified in the terms of sale and delivery.
The reproduction and distribution of the documentation and software supplied with this product and the use of its contents is subject
to written authorization from Gemtek.
Gemtek 4G Wi-Fi Spot
2
Contents
ContentsContents
Contents
Copyright.......................................................................................................................................................................................................... 1
Notice............................................................................................................................................................................................................... 1
Contents .............................................................................................................................................................................................................. 2
About this Manual ................................................................................................................................................................................................ 6
Purpose............................................................................................................................................................................................................ 6
Conventions Used in this Document................................................................................................................................................................. 6
Chapter 1 – Introduction....................................................................................................................................................................................... 7
Product Overview ............................................................................................................................................................................................. 7
Product Package .............................................................................................................................................................................................. 7
Connector and Buttons..................................................................................................................................................................................... 8
LCD Display ................................................................................................................................................................................................... 11
Chapter 2 – Installation ...................................................................................................................................................................................... 14
Install through USB Cable & Connect to Service ............................................................................................................................................ 14
Connect to service with Wi-Fi ......................................................................................................................................................................... 17
Gemtek 4G Wi-Fi Spot
3
How to Setup Wireless Security...................................................................................................................................................................... 21
Chapter 3 – Reference Manual .......................................................................................................................................................................... 22
Personalize..................................................................................................................................................................................................... 24
Personalize | Password............................................................................................................................................................................... 24
Personalize | Device Time........................................................................................................................................................................... 26
Personalize | Device Name......................................................................................................................................................................... 27
Personalize | Restore To Factory................................................................................................................................................................ 28
Internet........................................................................................................................................................................................................... 29
Internet | WiMAX Security ........................................................................................................................................................................... 29
Internet | Internet Protocol........................................................................................................................................................................... 31
Internet | Firewall ........................................................................................................................................................................................ 32
Internet | Dynamic DNS .............................................................................................................................................................................. 34
Wi-Fi Settings................................................................................................................................................................................................. 36
Wi-Fi Settings | Basic.................................................................................................................................................................................. 36
Gemtek 4G Wi-Fi Spot
4
Wi-Fi Settings | Advanced........................................................................................................................................................................... 38
Wi-Fi Settings | WPS................................................................................................................................................................................... 42
Local Address................................................................................................................................................................................................. 43
Local Address | DHCP Server..................................................................................................................................................................... 43
Local Address | Lease Status...................................................................................................................................................................... 45
Local Address | Lease Reservation............................................................................................................................................................. 46
Port Forwarding.............................................................................................................................................................................................. 47
Port Forwarding | Basic............................................................................................................................................................................... 47
Port Forwarding | Forwarding...................................................................................................................................................................... 48
Control Panel.................................................................................................................................................................................................. 49
Control Panel | Software ............................................................................................................................................................................. 49
Control Panel | Certificate ........................................................................................................................................................................... 50
Control Panel | System ............................................................................................................................................................................... 51
Control Panel | Power Management............................................................................................................................................................ 52
Gemtek 4G Wi-Fi Spot
5
Control Panel | LCD Management............................................................................................................................................................... 53
Control Panel | System Buzzer.................................................................................................................................................................... 54
Control Panel | About.................................................................................................................................................................................. 55
Status............................................................................................................................................................................................................. 56
Status| WiMAX Status................................................................................................................................................................................. 56
Status| Device Status.................................................................................................................................................................................. 57
Reboot /Log out/ Reconnect........................................................................................................................................................................... 58
Statement
Statement / FCC Statement......................................................................................................................................................................... 59
Statement / CE Statement ......................................................................................................................................................................... 61
Gemtek 4G Wi-Fi Spot
6
About this Manual
About this ManualAbout this Manual
About this Manual
Purpose
PurposePurpose
Purpose
This document provides information and procedures on installation and configuration of WiMAX/Wi-Fi Portable Router. You could
utilize the theoretical information in this guide to setup your device.
Conventions Used in this Document
Conventions Used in this DocumentConventions Used in this Document
Conventions Used in this Document
The following typographic conventions and symbols are used throughout this document:
Very important information. Failure to observe this may result in damage.
Important information that should be observed.
Additional information that may be helpful but which is not required.
Gemtek 4G Wi-Fi Spot
7
bold Menu commands, buttons and input fields are displayed in bold
Chapter 1
Chapter 1 Chapter 1
Chapter 1 –
––
– Introduction
Introduction Introduction
Introduction
Product Overview
Product OverviewProduct Overview
Product Overview
Thank you for choosing WiMAX/Wi-Fi Portable Router. Compliant with 802.16-2005 WiMAX standard, WiMAX/Wi-Fi Portable Router
is a comprehensive device which can connects to WiMAX network and also provides Wi-Fi connectivity for multiple users.
Product Package
Product PackageProduct Package
Product Package
Item Qty
1 WiMAX/Wi-Fi Portable Router 1
2 User Manual
1
3 Power Adapter 1
4 USB cable 1
5 Battery 1
Gemtek 4G Wi-Fi Spot
8
If any of the items mentioned above are missing or damaged, please contact our customer support immediately.
Connector
ConnectorConnector
Connector and Buttons
and Buttons and Buttons
and Buttons
Gemtek 4G Wi-Fi Spot
9
1. Power Button: Press and hold the Power button for 3 seconds to
power on or power off the device.
2. View Status: Shortly press the Power button to view the device
status. (Including WiMAX Status, Wi-Fi connection Status and
System Status)
3. WPS Button: Press WPS button to establish wireless connection
without setup the device.
Step1: Press the WPS button on Zoom, and the WPS LED
indicator will start flashing.
Step2: And then press the WPS button on the client you wish to
connect within 2 minutes.
4. Mute: Shortly press the WPS button to mute the buzzer.
Gemtek 4G Wi-Fi Spot
10
5. Reboot/Reset Button: Press and hold the Reboot/Reset button for
less than 5 seconds to reboot the device. Or press and hold the
Reboot/Reset button for more than 5 seconds to reset the device to
factory default.
6. USB Port: This port is to connect your device with a PC or charge
the built-in battery.
Gemtek 4G Wi-Fi Spot
11
LCD Display
LCD DisplayLCD Display
LCD Display
Display the WiMAX Signal Strength when the device is connected with WiMAX service.
WiMAX Status, you can view the device WiMAX connection status by shortly press the power button once.
This icon appears when the system buzzer sound is enabled.
Battery charging, this icon appears when the device is connected with PC by using USB cable.
Display the battery status.
Gemtek 4G Wi-Fi Spot
12
This icon appears when the device is connected with PC through USB cable.
Display the Wi-Fi connectivity which you can know that how many users are currently connected with your device
through Wi-Fi connection. (A device only allows eight Wi-Fi connections)
Display the system time when the device is connected with WiMAX service.
Gemtek 4G Wi-Fi Spot
13
System Startup
WiMAX Status
Wi-Fi Connection Status
System Status
Hibernate Mode
Standby Mode
Low Battery
Reset Default
Reboot
Power Down
Gemtek 4G Wi-Fi Spot
14
Chapter
Chapter Chapter
Chapter 2
22
2
–
––
– In
In In
Installation
stallationstallation
stallation
Install through USB Cable & Connect to Service
Install through USB Cable & Connect to ServiceInstall through USB Cable & Connect to Service
Install through USB Cable & Connect to Service
Please follow the steps below to install the device:
Step1: Connect the device to your PC with a USB cable
provided.
Step2: Windows will automatically install the device driver after
you plug in the USB cable.
Gemtek 4G Wi-Fi Spot
15
Step3: Launching the Windows Network Connections
window by right click on My Network Places and
select Properties. The driver has been installed
successfully if there is a new Local Area Connection
with Device Name, MediaTak WiMAX RNDIS-based
device, is appeared.
Gemtek 4G Wi-Fi Spot
16
Step4: Now you can start browsing the Internet or configure
your device by opening the web browser and entering
the default IP address of the device:
http://192.168.15.1/
(The default password is “admin”.)
Gemtek 4G Wi-Fi Spot
17
Connect to service with Wi
Connect to service with WiConnect to service with Wi
Connect to service with Wi-
--
-Fi
FiFi
Fi
Step1: You could connect to the service without installation
through Wi-Fi connection.
Gemtek 4G Wi-Fi Spot
18
Step2: Launching the Windows Wireless Network
Connection, search for the device name (SSID) from
the network list and connect to the device. The default
SSID is “GemtekHotspot”.
Gemtek 4G Wi-Fi Spot
19
Step3: Select Wireless Network Connection Status from the
Windows task bar. The Status would show
“Connected” once the Wi-Fi connection is established.
Gemtek 4G Wi-Fi Spot
20
Step4: Now you can start browsing the Internet or configure
your device by opening the web browser and entering
the default IP address of the device:
http://192.168.1.1/
(The default password is “admin”.)
Gemtek 4G Wi-Fi Spot
21
How to Se
How to SeHow to Se
How to Setup Wireless Security
tup Wireless Securitytup Wireless Security
tup Wireless Security
The device equipped with WEP, WPA PSK, WPA2PSK and
WPA-WPA2-Mixed PSK standards. To enable or change
security settings, you could click Wi-Fi Setting > Basic tab on
the web interface, and you would need to determine which
standard and key you would like to use.
Gemtek 4G Wi-Fi Spot
22
Chapter
Chapter Chapter
Chapter 3
33
3
–
––
–
Reference Manual
Reference ManualReference Manual
Reference Manual
The main menu is located at the left side of the screen and each main menu item contains sub-items on the top right of the screen.
You can refer to the menu structure is given below:
Menu Items Sub Items Menu Items Sub Items Menu Items Sub Items
Personalize Password
Device Time
Device Name
Restore To Factory
Local Address DHCP Server
Lease Status
Lease Reservation
Status WiMAX Status
Device Status
Internet WiMAX Security
Internet Protocol
Firewall
Dynamic DNS
Port forwarding
Basic
Forwarding
Engineering WMX Config
DEV Config
Status
DM Settings
Wi-Fi Settings Basic
Advanced
WPS
Control Panel Software
Certificate
System
Power Management
LCD Management
System Buzzer
About
Reboot
Logout
Reconnect
Gemtek 4G Wi-Fi Spot
23
Please click Apply button every time the settings are changed.
Gemtek 4G Wi-Fi Spot
24
Personalize
PersonalizePersonalize
Personalize
Personalize | Password
Select Personalize > Password to enable or disable the
password protection for the device. You can also change the
existing password on this sub-menu.
Enable Login Password Protection: If this option is
enabled, you have to enter the password every time you
connect to the device.
New Login Password: Enter a new password. (The new
password can contain 64 bytes ASCII code and it is case
sensitive.)
Confirm New Login Password: Re-enter the new
password to confirm.
Undo button: Click the Undo button to clear the data on
this window.
Gemtek 4G Wi-Fi Spot
25
Apply button: The changes that you have made to this
window can be saved in the device by clicking the Apply
button.
Forgot your password?
Press and hold the Reboot/Reset button for more than 5 seconds to reset the device to factory default. (please see
“Connector and Buttons” section in CHAPTER 1 of this document to find the location of this button on the device)
Factory default password?
The factory default password is admin.
We strongly recommend you to change the login credential for device security.
Gemtek 4G Wi-Fi Spot
26
Personalize | Device Time
Select Personalize > Device Time to set the time zone.
Enable NTP: Check this option to enable NTP (Network
Time Protocol) to ensure that all computers on the network
use the same time.
Current Local Time: Display current local time.
Time Zone: Select the proper time zone for your location on
the drop down menu.
Auto Adjust for Daylight Saving Time: Please enable this
option if your location observes Daylight Savings Time.
Undo button: Click the Undo button to clear the data on this
window.
Apply button: The changes that you have made to this
window can be saved in the device by clicking the Apply
button.
Gemtek 4G Wi-Fi Spot
27
Personalize | Device Name
Select Personalize > Device Name to define a specific name
for your device, so that you can login to this device from any
PC on your internal network by entering the device name on
the address bar. The default, the device name is WiMaxCPE.
Device Name: Display the current device name.
New Device Name: Enter a new name for your device
(Maximum 20 ASCII Printable Characters allowed).
Undo button: Click the Undo button to clear the changes
that you have made on this window.
Apply button: The changes that you have made on this
window can be saved in the device by clicking the Apply
button.
Gemtek 4G Wi-Fi Spot
28
Personalize | Restore To Factory
Select Personalize > Restore To Factory to clear all users’
configuration and restore to factory default settings.
Restore Factory Settings: Check this checkbox and click
the Apply button to reset the device settings to factory
default.
Gemtek 4G Wi-Fi Spot
29
Internet
InternetInternet
Internet
Internet | WiMAX Security
Select Internet > WiMAX Security to setup the security
method.
Authentication Method: Select the authentication
protocol, EAP-TTLS-MACHAPV2, EAP-TLS or None.
Please enter the username and password if you select
EAP-TTLS-MACHAPV2.
The username and password will not be required if you
selected EAP-TLS, which is the default setting.
No input is needed if you select NONE.
Undo button: Click the Undo button to clear the changes
that you have made on this window.
Gemtek 4G Wi-Fi Spot
30
Apply button: The changes that you have made on this
window can be saved in the device by clicking the Apply
button.
Gemtek 4G Wi-Fi Spot
31
Internet | Internet Protocol
Select Internet > Internet Protocol to configure the internet
protocol.
Connection Mode: Display the current connection mode
of device with the WiMAX network.
Host Name: Enter the host name provided by your service
provider (optional).
Undo: Click the Undo button to clear the changes that you
have made on this window.
Apply: The changes that you have made on this window
can be saved in the device by clicking the Apply button.
Gemtek 4G Wi-Fi Spot
32
Internet | Firewall
Select Internet > Firewall to configure the built-in firewall
feature of the device. The firewall feature can be used to block
unauthorized access while allowing only the authorized
connections from the Internet. This feature also allows the
device to be managed over the Internet by authorized
personnel.
Operation Mode: Display the operation mode of firewall.
Enable Firewall: Click the checkbox to enable device
firewall.
Enable Web Login from Internet: Enabling this option will
allow you to access the device from other networks.
Web Login Port from Internet: Define a specific port
number for security access control (Matches numbers in
range of 0 through 65536).
Gemtek 4G Wi-Fi Spot
33
Enable ping from internet: The device will respond to a
ping request from the internet if this option is enabled.
Undo: Click the Undo button to clear the changes that you
have made on this window.
Apply: The changes that you have made on this window
can be saved in the device by clicking the Apply button.
Gemtek 4G Wi-Fi Spot
34
Internet | Dynamic DNS
Select Internet > Dynamic DNS to configure the DDNS
settings. (The device only provides the listed DNS service
providers.)
User: Enter the username provided by your DNS service
provider.
Password: Enter the password provided by your DNS
service provider.
Host: Enter the host provided by your DNS service
provider.
Enable: Enable the DNS service provider by checking this
checkbox.
Undo: Click the Undo button to clear the changes that you
have made on this window.
Gemtek 4G Wi-Fi Spot
35
Apply: The changes that you have made on this window
can be saved in the device by pressing the Apply button.
Gemtek 4G Wi-Fi Spot
36
Wi
WiWi
Wi-
--
-Fi Settings
Fi SettingsFi Settings
Fi Settings
Wi-Fi Settings | Basic
Select Wi-Fi Settings > Basic to configure the basic Wi-Fi
settings.
Wireless Settings: Enable or disable the Wi-Fi interface by
clicking on this checkbox.
Network Name (SSID): Define the service set identifier
that represents the “name” of your network. (the default
SSID is ”GmetekHotspot”)
SSID Suppress: Enable or disable suppression of SSID
broadcasting.
Authentication: Select the Wi-Fi security method.
Encryption: Select the Wi-Fi encryption algorithm.
Password Type: Select the Wi-Fi password type.
Gemtek 4G Wi-Fi Spot
37
Password: Enter the password for your Wi-Fi service,
the default is “1234567890”.
Undo: Click the Undo button to clear the changes that you
have made on this window.
Apply: The changes that you have made on this window can
be saved in the device by clicking the Apply button.
Gemtek 4G Wi-Fi Spot
38
Wi-Fi Settings | Advanced
Select Wi-Fi Settings > Advanced to configure the advanced
Wi-Fi settings.
Radio Channel: Select the appropriate channel for your
Wi-Fi network.
Working Mode: Select the wireless operation mode for
your Wi-Fi network. (The selection contains 802.11b/g,
802.11b only and 802.11g only)
RTS Threshold: Specify the packet size threshold of the
device by changing the request-to-send (RTS) value.
(Range : 256 to 2432)
Fragmentation Threshold: Define the maximum frame
size can be transmitted without fragmenting the frame.
Beacon Period: Define the amount of time between
access point beacons.
Gemtek 4G Wi-Fi Spot
39
DTIM Interval: Define the Delivery Traffic Indication
Message Interval which specifies the data beacon rate
between 1 and 255.
CTS Protection Mode: Set Clear to send (CTS)
protection mode to Auto to ensure that the computers
on a network can connect to a wireless router when
many communication devices are present.
Preamble Length: Define the length of preamble, either
short or long.
Transmission Power: Select the Wi-Fi transmit power
from the drop down menu.
System Default: Select the filter action for the device
access control.
Disable: Select disable to disable access control
(ACL) feature.
Gemtek 4G Wi-Fi Spot
40
Allow: To create a MAC filter list for allowing the
specific clients to have access to the wireless
network.
Insert Button: Click Insert to add MAC address
(up to 10) to the list.
Del Button: Click Del to remove MAC address
from the list.
Deny: To create a MAC filter list for blocking the
specific clients to have access to the wireless
network.
Insert Button: Click Insert to add MAC address
(up to 10) to the list.
Del Button: Click Del to remove MAC address
from the list.
Gemtek 4G Wi-Fi Spot
41
Undo: Click the Undo button to clear the changes that you
have made on this window.
Apply: The changes that you have made on this window can
be saved in the device by clicking the Apply button.
Gemtek 4G Wi-Fi Spot
42
Wi-Fi Settings | WPS
Select Wi-Fi Settings > WPS to configure the Wi-Fi Protected
Setup.
Enable WPS: Enable or disable the WPS by clicking on this
checkbox.
PBC Mode: Select this radio button and click on Start
button to setup WPS on your device and then start WPS
on the client which you would like to connect with your
device within 2 minutes.
PIN Mode: Select this radio button and enter Client PIN code
which you would like to connect with your device to start WPS
on the client.
Gemtek 4G Wi-Fi Spot
43
Local Address
Local AddressLocal Address
Local Address
Local Address | DHCP Server
Select Local Address > DHCP Server to configure the internal
DHCP server settings. This device has a built-in DHCP server
that can be used for managing the allotment of IP address for
the devices connected to the LAN Port of the device.
Enable DHCP Server: Enable DHCP Server by clicking on
the checkbox.
DHCP Server IP address: Enter the DHCP server IP
address.
DHCP Starting IP address/ DHCP Ending IP address:
Define the IP address range shall be supported by the DHCP
server.
DHCP Lease Time: Specify the IP address renewal time.
Gemtek 4G Wi-Fi Spot
44
Undo: Click the Undo button to clear the changes that you
have made on this window.
Apply: The changes that you have made on this window can
be saved in the device by clicking the Apply button.
Gemtek 4G Wi-Fi Spot
45
Local Address | Lease Status
Select Local Address > Lease Status to view the current
status of client host PC such as host name, host PC’s MAC
address, IP address, and remaining lease time
Refresh: Click the Refresh button to display the updated
information of the client host PC.
Auto: Click the Auto button to refresh the information
automatically.
Gemtek 4G Wi-Fi Spot
46
Local Address | Lease Reservation
Select Local Address > Lease Reservation to assign the
specific IP addresses to the specific client device connected to
the LAN port.
Add button: Click the Add button to insert lease
reservation information.
Del button: Click the Del button to delete the selected
lease reservation information. Before clicking Del, one or
more information items must be selected by selecting the
checkbox on the Select column of the table.
Undo: Click the Undo button to clear the changes that you
have made on this window.
Apply: The changes that you have made on this window
can be saved in the device by clicking the Apply button.
Gemtek 4G Wi-Fi Spot
47
Port Forwarding
Port ForwardingPort Forwarding
Port Forwarding
Port Forwarding | Basic
Select Port Forwarding > Basic to forward the network traffic
to specific hosts based on the protocol and port number. It is
used to play Internet games or provide local services (such as
web hosting) for a LAN group.
Enable UPnP IGD: When this option is enabled, certain
Windows applications would setup the port forwarding rule
dynamically.
DMZ IP Address: The IP address of DMZ should be
entered here.
Undo: Click the Undo button to clear the changes that you
have made on this window.
Apply: The changes that you have made on this window
can be saved in the device by clicking the Apply button.
Gemtek 4G Wi-Fi Spot
48
Port Forwarding | Forwarding
Select Port Forwarding > Forwarding to manage the
additional port forwarding rules.
Add: Click the Add button to insert new port forwarding
rule. When adding a new port forwarding rule, please
select TCP or UDP, and then enter port and IP information
such as WAN port range, LAN IP address, and LAN port
range.
Del: Click the Del button to delete the selected port
forwarding rule.
Undo: Click the Undo button to clear the changes that you
have made on this window.
Apply: The changes that you have made on this window
can be saved in the device by clicking the Apply button.
Gemtek 4G Wi-Fi Spot
49
Control Panel
Control PanelControl Panel
Control Panel
Control Panel | Software
Select Control Panel > Software to manage the software of
your device. Click Browse to select the IPKG file, and then
click Upgrade to install the selected IPKG. Or click the
Remove button to delete the IPKG file.
Gemtek 4G Wi-Fi Spot
50
Control Panel | Certificate
Select Control Panel > Certificate to modify the device
certificates. Click Browse to select the certificate file, and then
click Upgrade to install the selected certificate.
Gemtek 4G Wi-Fi Spot
51
Control Panel | System
Select Control Panel > System to define the system Auto
refresh interval in second.
Undo: Click the Undo button to clear the changes that you
have made on this window.
Apply: The changes that you have made on this window
can be saved in the device by clicking the Apply button.
Gemtek 4G Wi-Fi Spot
52
Control Panel | Power Management
Select Control Panel > Power Management to help you
manage your device battery power.
Power Save Enable: Enable this option to help conserve
power when using your device’s built-in battery.
Power Standby time: Enter the number of seconds that
your device will go into standby mode.
Power Hibernate time: Enter the number of seconds that
your device will go into hibernate.
Undo: Click the Undo button to clear the changes that you
have made on this window.
Apply: The changes that you have made on this window
can be saved in the device by clicking the Apply button.
Gemtek 4G Wi-Fi Spot
53
Control Panel | LCD Management
Select Control Panel > LCD Management to help you manage
your device LCD display.
LCD Backlight Timeout: Select Never radio button to
keep the LCD backlight always on, or select the second
radio button to set the backlight timeout period in seconds.
System Time Display Format: Select the system time
display format from the drop down menu, 12hr or 24hr.
Wi-Fi Password Display Enable: Check on this checkbox
to display the Wi-Fi password on the device LCD panel.
Undo: Click the Undo button to clear the changes that you
have made on this window.
Apply: The changes that you have made on this window
can be saved in the device by clicking the Apply button.
Gemtek 4G Wi-Fi Spot
54
Control Panel | System Buzzer
Select Control Panel > System Buzzer to enable or disable
(Mute) the buzzer sound during the system startup and
shutdown.
Undo: Click the Undo button to clear the changes that you
have made on this window.
Apply: The changes that you have made on this window
can be saved in the device by clicking the Apply button.
Gemtek 4G Wi-Fi Spot
55
Control Panel | About
Select Control Panel > About to display the basic information
about the device: Service Provider, Product Name, WAN port
MAC address, LAN Port MAC address, Model ID, Device
hardware version and Serial ID.
Gemtek 4G Wi-Fi Spot
56
Status
StatusStatus
Status
Status| WiMAX Status
Select Status > WiMAX Status to display the WiMAX
connection status.
Refresh: Click the Refresh button to refresh the current
WiMAX connection status.
Auto: Click the Auto button to update the status
information periodically.
Gemtek 4G Wi-Fi Spot
57
Status| Device Status
Select Status > Device Status to display the status of device
system uptime and WAN information.
Refresh: Click the Refresh button to update the current
device status.
Auto: Click the Auto button to update the status
information periodically.
Gemtek 4G Wi-Fi Spot
58
Reboot /
Reboot /Reboot /
Reboot /Log out/
Log out/Log out/
Log out/ Reconnect
Reconnect Reconnect
Reconnect
There are 3 function buttons on the lower left corner
Reboot: Click the Reboot
button to restart your device.
Log out: To logout from this management UI and go back to
log in page when you click the Log out
button.
Reconnect: The device will attempt reconnection to the Base
Station if you click the Reconnect button.
Gemtek 4G Wi-Fi Spot
59
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
IMPORTANT NOTE:
Radiation Exposure Statement:
The product comply with the US/Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for
Gemtek 4G Wi-Fi Spot
60
intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far
as possible from the user body or set the device to lower output power if such function is available.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product
marketed in US must fixed to US operation channels only.
Due to the essential high output power natural of WiMAX device, use of this device with other transmitter at the same time may
exceed the FCC RF exposure limit and such usage must be prohibited (unless such co-transmission has been approved by FCC in
the future).
Gemtek 4G Wi-Fi Spot
61
Europe – EU Declaration of Conformity
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove
presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:
- EN 60950-1: 2006+A11: 2009
Safety of Information Technology Equipment
- EN 300 328 V1.7.1: 2006
- Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2,4
GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE
Directive
- EN62311 : 2008
- Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz – 300 GHz)
EN 301 489-1 V1.8.1: 2008
- Electromagnetic compatibility and Radio Spectrum Matters (ERM); Electro Magnetic Compatibility (EMC) standard for radio equipment and services;
Part 1: Common technical requirements
EN 301 489-4 V1.4.1: 2009
- Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part
4: Specific conditions for fixed radio links, Broadband Data Transmission System Base stations, ancillary equipment and services
EN 301 489-17 V2.1.1: 2009
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment; Part 17: Specific
conditions for Broadband Data Transmission Systems
EN 302 326-2 V1.2.2: 2007
Fixed Radio Systems; Multipoint Equipment and Antennas; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE
Gemtek 4G Wi-Fi Spot
62
Directive for Digital Multipoint Radio Equipment
EN 302 326-3 V1.3.1: 2008
Fixed Radio Systems;Multipoint Equipment and Antennas;Part 3: Harmonized EN covering the essential requirementsof article 3.2 of the R&TTE
Directivefor Multipoint Radio Antennas.
0560
Česky
[Czech]
[Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními požadavky a
dalšími příslušnými ustanoveními směrnice 1999/5/ES.
Dansk
[Danish]
Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr [udstyrets
typebetegnelse] overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Deutsch
[German]
Hiermit erklärt [Name des Herstellers], dass sich das Gerät [Gerätetyp] in Übereinstimmung mit
den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der
Richtlinie 1999/5/EG befindet.
Eesti
[Estonian]
Käesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tüüp = type of
equipment] vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele
teistele asjakohastele sätetele.
English Hereby, [name of manufacturer], declares that this [type of equipment] is in compliance with
the essential requirements and other relevant provisions of Directive 1999/5/EC.
Español Por medio de la presente [nombre del fabricante] declara que el [clase de equipo] cumple con
Gemtek 4G Wi-Fi Spot
63
[Spanish] los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva
1999/5/CE.
Ελληνική
[Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ [name of manufacturer] ΔΗΛΩΝΕΙ ΟΤΙ [type of equipment]
ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ
ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Français
[French]
Par la présente [nom du fabricant] déclare que l'appareil [type d'appareil] est conforme aux
exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Italiano
[Italian]
Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio] è conforme ai
requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Latviski
[Latvian]
Ar šo [name of manufacturer / izgatavotāja nosaukums] deklarē, ka [type of equipment /
iekārtas tips] atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem
noteikumiem.
Lietuvių
[Lithuanian]
Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka esminius reikalavimus ir
kitas 1999/5/EB Direktyvos nuostatas.
Nederlands
[Dutch]
Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming
is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Malti
[Maltese]
Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma
mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Magyar
[Hungarian]
Alulírott, [gyártó neve] nyilatkozom, hogy a [... típus] megfelel a vonatkozó alapvetõ
követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Polski Niniejszym [nazwa producenta] oświadcza, że [nazwa wyrobu] jest zgodny z zasadniczymi
Gemtek 4G Wi-Fi Spot
64
[Polish] wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
Português
[Portuguese]
[Nome do fabricante] declara que este [tipo de equipamento] está conforme com os requisitos
essenciais e outras disposições da Directiva 1999/5/CE.
Slovensko
[Slovenian]
[Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi
relevantnimi določili direktive 1999/5/ES.
Slovensky
[Slovak]
[Meno výrobcu] týmto vyhlasuje, že [typ zariadenia] spĺňa základné požiadavky a všetky
príslušné ustanovenia Smernice 1999/5/ES.
Suomi
[Finnish]
[Valmistaja = manufacturer] vakuuttaa täten että [type of equipment = laitteen tyyppimerkintä]
tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin
muiden ehtojen mukainen.
Svenska
[Swedish]
Härmed intygar [företag] att denna [utrustningstyp] står I överensstämmelse med de väsentliga
egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.