GemTek Technology WRTB283N Dual band Router User Manual WRTB 283N Manual

Gemtek Technology Co., Ltd. Dual band Router WRTB 283N Manual

Contents

User manual 2

   Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the WRTB-283N. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows® XP. If you have a different operating system, the screenshots on your computer will look similar to the following examples.)   1. Why can’t I access the web-based configuration utility?  When entering the IP address of the Gemtek router (192.168.0.1 for example), you are not connecting to a website on the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility.  •    Make sure you have an updated Java-enabled web browser. We recommend the following:  • Internet Explorer 6.0 or higher • Chrome 2.0 or higher • Safari 3.0 or higher • Firefox 3.0 or higher  •    Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different cable or connect to a different port on the device if possible. If the computer is turned off, the link light may not be on.  •    Disable any internet security software running on the computer. Software firewal s such as Zone Alarm, Black Ice, Sygate, Norton Personal Firewal , and Windows XP firewal    may block access to the configuration pages. Check the help files included with your firewal    software for more information on disabling or configuring it.
  • Configure your Internet settings:  •    Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults.  •    Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK.  •    Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.  •    Close your web browser (if open) and open it.  •    Access the web management. Open your web browser and enter the IP address of your Gemtek router in the address bar. This should open the login page for your the web management.  •    If you stil    cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer.  2. What can I do if I forgot my password?  If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back to the factory defaults.  To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is admin and leave the password box empty.
  3. Why can’t I connect to certain sites or send and receive emails when connecting through my router?  If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc).  Note: AOL DSL+ users must use MTU of 1400.  To find the proper MTU Size, you’ll have to do a special ping of the destination you’re trying to go to. A destination could be another computer, or a URL.  • Click on Start and then click Run.  • Windows® 95, 98, and Me users type in command (Windows NT, 2000, XP, Vista® and 7 users type in cmd) and press Enter (or click OK).  • Once the window opens, you’ll need to do a special ping. Use the following syntax:      ping [url] [-f] [-l] [MTU value]      Example: ping yahoo.com -f -l 1472
  You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network we’re working with (1452+28=1480).  Once you find your MTU, you can now configure your router with the proper MTU size.   To change the MTU rate on your router follow the steps below:  •    Open your browser, enter the IP address of your router (192.168.0.1) and click OK.  •    Enter your username (admin) and password (blank by default). Click OK to enter the web configuration page for the device.  •    Click on Setup and then click Manual Configure.      •    To change the MTU enter the number in the MTU field and click Save Settings to save your settings.  •    Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten.
   Wireless Basics  Gemtek wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the Gemtek wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers.  A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users.  Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards.  Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link.    What is Wireless?  Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or office network.  Why Gemtek Wireless?  Gemtek is the worldwide leader and award winning designer, developer, and manufacturer of networking products. Gemtek delivers the performance you need at a price you can afford. Gemtek has all the products you need to build your network.
  How does wireless work?  Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able to connect your computer. There are two different types of wireless networks: Wireless Local Area Network (WLAN) and Wireless Personal Area Network (WPAN).  Wireless Local Area Network (WLAN)  In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point, the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and many other outdoor venues.  Wireless Personal Area Network (WPAN)  Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away. Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use nearly as much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries.  Who uses wireless?  Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, Gemtek has a wireless solution for it.  Home • Gives everyone at home broadband access • Surf the web, check email, instant message, and etc • Gets rid of the cables around the house • Simple and easy to use  Small Office and Home Office • Stay on top of everything at home as you would at office • Remotely access your office network from home • Share Internet connection and printer with multiple computers
• No need to dedicate office space
  Where is wireless used?  Wireless technology is expanding everywhere not just at home or office. People like the freedom of mobility and it’s becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called “hotspots”.  Using a Gemtek Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers.  Wireless network is easy to setup, but if you’re installing it for the first time it could be quite a task not knowing where to start. That’s why we’ve put together a few setup steps and tips to help you through the process of setting up a wireless network.    Tips  Here are a few things to keep in mind, when you install a wireless network.  Centralize your router or Access Point  Make sure you place the router/access point in a centralized location within your network for the best performance. Try to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range.  Eliminate Interference  Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency.  Security  Don’t let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA security feature on the router. Refer to product manual for detail information on how to set it up.
       There are basically two modes of networking:   Wireless Modes  •    Infrastructure – All wireless clients will connect to an access point or wireless router.  •    Ad-Hoc – Directly connecting to another computer, for peer-to-peer communication, using wireless network adapters on each computer, such as two or more WRTB-283N wireless network Cardbus adapters.  An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point.  An    Ad-Hoc    network    contains    only    clients,    such    as    laptops    with    wireless    cardbus    adapters.    All    the    adapters    must   be    in    Ad-Hoc    mode    to communicate.                             l
        Check your IP address   Networking Basics After you install your new Gemtek adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.  Click on Start > Run. In the run box type cmd and click OK. (Windows® 7/Vista® users type cmd in the Start Search box.)  At the prompt, type ipconfig and press Enter.  This will display the IP address, subnet mask, and the default gateway of your adapter.  If the address is 0.0.0.0, check your adapter instal ation, security settings, and the settings on your router. Some firewal    software programs    may    block    a    DHCP    request    on    newly    installed adapters.  If you are connecting to a wireless network at a hotspot (e.g. hotel, coffee shop, airport), please contact an employee or administrator to verify their wireless network settings.
  Statically Assign an IP address  If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:  Step 1 Windows® 7 - Click on Start > Control Panel > Network and Internet > Network and Sharing Center. Windows Vista® - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections. Windows XP - Click on Start > Control Panel > Network Connections. Windows 2000 - From the desktop, right-click My Network Places > Properties.  Step 2 Right-click on the Local Area Connection which represents your Gemtek network adapter and select Properties.  Step 3 Highlight InternetProtocol(TCP/IP) and click Properties.  Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router.  Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1).  Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP.  Step 5 Click OK twice to save your settings.
      Standards • IEEE 802.11a   • IEEE 802.11n • IEEE 802.11g • IEEE 802.3 • IEEE 802.3u • IEEE 802.3ab   Technical Specifications Frequency Range • 2.4GHz to 2.483GHz • 5.15GHz to 5.825GHz  Transmitter Output Power • 5GHz 26.4dBm (peak )                  • 2.4GHz 25dBm (peak)  Security • WPA-Personal • WPA2-Personal • WPA-Enterprise   LEDs • 5GHz 18dBm (average)     • 2.4GHz 14dBm (average)   • Power      • Internet   • WPA2-Enterprise  Wireless Signal Rates* • 450Mbps    • 12Mbps • 300Mbps    • 11Mbps • 108Mbps     • 9Mbps • 54Mbps      • 6Mbps • 48Mbps    • 5.5Mbps • 36Mbps    • 2Mbps • 24Mbps      • 1Mbps   • 18Mbps      MSC (0-15) • 130Mbps (270)   • 117Mbps (243) • 104Mbps (216)   • 78Mbps (162) • 66Mbps (135)    • 58.5Mbps (121.5) Operating Temperature • 32°F to 104°F ( 0°C to 40°C)  Humidity • 95% maximum (non-condensing)  Safety & Emissions • FCC • IC  Dimensions • L = 8.4 inches • W = 6.3 inches • H = 1.4 inches  Warranty • 52Mbps (108)   • 26Mbps (54)       • 12Mbps (27)       • 39Mbps (81) • 19.5Mbps (40.5) • 6.5Mbps (13.5) • 1 Year  *    Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range.
 Warranty Subject to the terms and conditions set forth herein, Gemtek Systems, Inc. (“Gemtek”) provides this Limited Warranty:  •    Only to the person or entity that originally purchased the product from Gemtek or its authorized reseller or distributor, and •    Only for products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, U.S. Military Installations, or addresses with an APO or FPO.  Limited Warranty: Gemtek warrants that the hardware portion of the Gemtek product described below (“Hardware”) will be free from material defects in workmanship and materials under normal use from the date of original retail purchase of the product, for the period set forth below (“Warranty Period”), except as otherwise stated herein.  • Hardware: One (1) year • Spare parts and spare kits: Ninety (90) days  The    customer’s    sole    and    exclusive    remedy    and    the    entire    liability    of    Gemtek    and    its    suppliers    under    this    Limited Warranty    will    be,    at   Gemtek’s option, to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund the actual purchase price paid. Any repair or replacement will be rendered by Gemtek at an Authorized Gemtek Service Office. The replacement hardware need not be new or have an identical make, model or part. Gemtek may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that Gemtek reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware. Repaired or replacement hardware will be warranted for the remainder of the original Warranty Period or ninety (90) days, whichever is longer, and is subject to the same limitations and exclusions. If a material defect is incapable of correction, or if Gemtek determines that it is not practical to repair or replace the defective Hardware, the actual price paid by the original purchaser for the defective Hardware will be refunded by Gemtek upon return to Gemtek of the defective Hardware. All Hardware or part thereof that is replaced by Gemtek, or for which the purchase price is refunded, shall become the property of Gemtek upon replacement or refund.
Limited Software Warranty: Gemtek warrants that the software portion of the product (“Software”) will substantially conform to Gemtek’s then current functional specifications for the Software, as set forth in the applicable documentation, from the date of original retail purchase of the Software for a period of ninety (90) days (“Software Warranty Period”), provided that the Software is properly installed on approved hardware and operated as contemplated in its documentation. Gemtek further warrants that, during the Software Warranty Period, the magnetic media on which Gemtek delivers the Software will be free of physical defects. The customer’s sole and exclusive remedy and the entire liability of Gemtek and its suppliers under this Limited Warranty will be, at Gemtek’s option, to replace the non-conforming Software (or defective media) with software that substantially conforms to Gemtek’s functional specifications for the Software or to refund the portion of the actual purchase price paid that is attributable to the Software.
  Except as otherwise agreed by Gemtek in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by Gemtek for the Software. Replacement Software will be warranted for the remainder of the original Warranty Period and is subject to the same limitations and exclusions. If a material non-conformance is incapable of correction, or if Gemtek determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid by the original licensee for the non-conforming Software will be refunded by Gemtek; provided that the non-conforming Software (and all copies thereof) is first returned to Gemtek. The license granted respecting any Software for which a refund is given automatically terminates.  Non-Applicability of Warranty: The Limited Warranty provided hereunder for Hardware and Software portions of Gemtek’s products will not be applied to and does not cover any refurbished product and any product purchased through the inventory clearance or liquidation sale or other sales in which Gemtek, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case, the product is being sold “As-Is” without any warranty whatsoever including, without limitation, the Limited Warranty as described herein, notwithstanding anything stated herein to the contrary.  Submitting A Claim:   The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired and the product is within warranty, the customer shall submit a claim to Gemtek as outlined below:  •    The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow DLink to confirm the same, along with proof of purchase of the product (such as a copy of the dated purchase invoice for the product) if the product is not registered.  •    The customer must obtain a Case ID Number from Gemtek Technical Support at 1-877-453-5465, who will attempt to assist the customer in resolving any suspected defects with the product. If the product is considered defective, the customer must obtain a Return Material Authorization (“RMA”) number by completing the RMA form and entering the assigned Case ID Number at     https://rma.dlink.com/.  •    After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package. Do not include any manuals or accessories in the shipping package. DLink will only replace the defective portion of the product and will not ship back any accessories.  •    The customer is responsible for al    in-bound shipping charges to Gemtek. No Cash on Delivery (“COD”) is al owed. Products sent COD
will either be rejected by Gemtek or become the property of Gemtek. Products shall be fully insured by the customer and shipped to Gemtek Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708. Gemtek will not be held responsible for any packages that are lost in transit to Gemtek. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by Gemtek.
      Return shipping charges shall be prepaid by Gemtek if you use an address in the United States, otherwise we will ship the product to you freight collect. Expedited shipping is available upon request and provided shipping charges are prepaid by the customer. Gemtek may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from the outside of the package. The product owner agrees to pay Gemtek’s reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by Gemtek not to be defective or non-conforming. What Is Not Covered: The Limited Warranty provided herein by Gemtek does not cover: Products that, in Gemtek’s judgment, have been subjected to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty instal ation, lack of reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the model or serial number has been altered, tampered with, defaced or removed; Initial installation, installation and removal of the product for repair, and shipping costs; Operational adjustments covered in the operating manual for the product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware or other products or services provided by anyone other than Gemtek; and Products that have been purchased from inventory clearance or liquidation sales or other sales in which Gemtek, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product.  While necessary maintenance or repairs on your Product can be performed by any company, we recommend that you use only an Authorized D- Link Service Office. Improper or incorrectly performed maintenance or repair voids this Limited Warranty.  Disclaimer of Other Warranties: EXCEPT FORTHE LIMITED WARRANTY SPECIFIED HEREIN,THE PRODUCT IS PROVIDED“AS-IS” WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO THE DURATION OF THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT.
  Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, GEMTEK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH GEMTEK’S PRODUCT IS CONNECTED WITH, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO GEMTEK FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF GEMTEK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NONCONFORMING PRODUCT. THE MAXIMUM LIABILITY OF GEMTEK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY. Governing Law: This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This Limited Warranty provides specific legal rights and you may also have other rights which vary from state to state.  Trademarks: Gemtek is a registered trademark of Gemtek Corporation/Gemtek Systems, Inc. Other trademarks or registered trademarks are the property of their respective owners.  Copyright Statement: No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from Gemtek Corporation/Gemtek Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice.  Copyright ©2011 by Gemtek Corporation. All rights reserved.  CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
  FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential instal ation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference wil    not occur in a particular instal ation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  •    Reorient or relocate the receiving antenna. •    Increase the separation between the equipment and receiver. •    Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •    Consult the dealer or an experienced radio/TV technician for help.  This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range.  FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.  This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  IMPORTANT NOTICE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.  The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.
  Industry Canada Statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Navigation menu