Gemalto 300GEL Card Reader User Manual GELA3xx guide

Gemalto Card Reader GELA3xx guide

Contents

Manual

1/7 ..FCC ID: MES300GELFebruary 2002GemEasyLink/Access3xxUser's GuideVersion 1.0
2/7© GEMPLUSRegulatory InformationNotice for the USA: FCC StatementFederal Communications Commission (FCC) Radio FrequencyInterference Statement (USA Only)This equipment has been tested and found to comply with the limits for aclass B digital device, pursuant to Part 15 of FCC Rules. These limits aredesigned to provide reasonable protections against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning theequipment off and on, the user is encouraged to try one of more of thefollowing measures:à Relocate the radio or television antenna.à Plug the equipment away from the radio or television.à Plug the equipment into a different electrical outlet, so that the equipmentand the radio or television are on separate electrical circuits.à Make sure that all your peripheral devices ar also FCC Class Bcertified.à Make sure you use only shielded cables to connect peripheral devicesto your equipment.à Consult your equipment dealer, or an experienced radio / televisiontechnician for help.WARNING: The system verification tests were conducted withGEMPLUS supported peripheral devices and GEMPLUS shielded cables,such as those you received with your system. Cables used with thisequipment must be properly shielded to comply with the requirements ofthe FCC.Changes or modifications not expressly approved by GEMPLUS couldvoid the user's authority to operate the equipment.This device complies with part 15 of the FCC rules. Operation is subject tothe following two conditions :(1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interferencethat may cause undesired operation.
3/7© GEMPLUSGEMEASYLINK/ACCESS3XX USER'S GUIDEThe GemEasyLink/Access3xx device is a contactless proximity card reader combiningboth the reader and the antenna in one small package. Its main application is accesscontrol.The unit utilizes the MIFARE® technology as part of its integrated solution.The device also provides both audio and visual feedback with an internal beeper andLED indicators.The GemEasyLink/Access3xx device is available in a rugged IP65 rated enclosure fordirect mounting (GemEasyAccess3xx) or as an OEM version (GemEasyLink3xx) forpackaging in a user supplied environment.The main features of the GemEasyLink/Access3xx device are:• Versatile package with easy connection allowing the card reader to be includedin equipment mounted indoors or outdoors and on a variety of surfaces,• Front mounted multicolor LED and beeper indicate status and error information,• Standard input / output.This user's guide includes information on the operation of GemEasyLink/Access3xxdevice.A typical application is depicted in figure 1:Figure 1: GemEasyLink/Access3xx typical applicationGeneraloverviewHost controller orControl PanelGemEasyLink/Access3xxReaderContactless SmartCardStandard Interface
4/7© GEMPLUSThe packaged device is composed of a small package including a reader and anantenna:Front side: A blue LED indicator and a bicolor LED indicator,Rear side: User cable for connection and adhesive fixing.Figure 2: GemEasyAccess3xx Mounting and Indicator ReferenceThe cable is dedicated to the user connection.The adhesive is used to fix the device to a wall.The blue indicator is related to device activity.The bicolor indicator is related to access control activity.An internal beeper is used as audio indicator.GemEasyAccess3xxOverviewBlueIndicatorBicolorIndicatorConnectioncableAdhesivefixing
5/7© GEMPLUSThe OEM device is composed of two assembled boards (Antenna & Reader) with thefollowing user indicators and connectors:Top side A blue indicator and a bicolor indicator,Bottom side Four groups of terminal block connectors.Figure 3: GemEasyLink3xx User Interface Component LocationsThe terminal blocks are dedicated to user connections.The blue indicator is related to device activity.The bicolor indicator is related to access control activity.The internal beeper is used as audio indicator.GemEasyLink3xxOverviewBicolorindicatorGreen/RedBlueindicatorBeeper(underJ3J1J4J2BrassSpacers xAntennaTop side ReaderBottom side
6/7© GEMPLUSThe GemEasyLink/Access3xx device offers the following features:• Up to date architecture,• The ability to communicate with any type of ISO14443A contactless smart card,• The ability to transmit smart card secured information,• Standard +12 V operation,• A friendly user interface with three LEDs and a beeper,• Built-in tamper switch.The GemEasyLink/Access3xx device provides and requires the following conditionsfor optimal operation.Operating Temperature range -20°C to +70°C (-4°F to 158°F)Humidity Range 0% to 95% non condensingIndex of protection IP00 (open case reader) / IP65 (packaged reader)Physical dimensions82 mm (Height) x 40 mm (Width) x 22 mm (Deep)for open case reader88 mm (Height) x 46 mm (Width) x 19 mm (Deep)for packaged readerCable AWG24 wirePower Supply Voltage +12 V (+8 V to +13 V)Power Supply Current < 150 mA for +12 V power supply voltage.Table 1: GemEasyLink/Access3xx Technical SpecificationsProduct featuresTechnicalSpecifications
7/7© GEMPLUSAn example of wiring diagram is depicted in Figure 4:In this example, when the door is required to open, the green indicator and the beeperare activated.Figure 4: Example Wiring DiagramWiring diagramDoor strike+-To controller+12VGROUNDReader DATA0Reader DATA1Door OpenTamper inputTamper inputConnect the cable shield to earthAdd FerriteWURTH reference 7442 712 22 or 742 7007on the cable at 45 cm from the deviceSignal+12VGNDDATA0DATA1GNDBEEPRLEDGLEDTAMP1TAMP2wireRedBlackGreenWhiteBlueRed/BlackGreen/BlackOrange/BlackOrangeWhite/BlackShieldPinJ1-1J1-2J2-1J2-2J2-3J4-1J4-2J4-3J3-1J3-2ii WARNING iiWURTH reference 742 712 22 or 742 7007

Navigation menu