Gemalto PROXDUB RFID Tag Reader User Manual Prox SU QIG C
Gemalto RFID Tag Reader Prox SU QIG C
Gemalto >
Contents
- 1. User Manual - Prox-DU
- 2. User Manual - Prox-SU
User Manual - Prox-SU
Prox-SU Contactless Interface USB Smart Card Reader With optional SIM/SAM slot Quick Installation Guide www.gemalto.com DOC118369C Page 1/4 Prox–SU Quick Installation Guide Prox–SU view Contactless card blue indicator SIM/SAM card yellow indicator 1m80 USB cable USB A plug Contactless card landing zone SIM/SAM card internal slot Note: For an optimal use with contactless smart cards, please put the smart card over the landing zone as shown in the above figure. Prox–SU computer installation Plug the USB cable into the USB port of your computer and follow the onscreen instructions when the installation wizard appears. For Windows operating systems, the standard USB CCID Microsoft driver is required. Use the Windows Update procedure if needed to download the driver. Use the PC/SC driver package or web link available in the Gemalto web site http://support.gemalto.com. PC/SC driver OS support: Windows: 2000, XP 32/64 bits, Vista 32/64 bits, Seven 32/64 bits Windows: CE 5.0 / 6.0 / 6.0 R2 Linux: Red Hat / Debian / Ubuntu / OpenSuse distributions Mac OS: Tiger 10.4 / Leopard 10.5 / Snow Leopard 10.6 For installation recommendation please refer to the Prox–SU installation guide available in the Gemalto web site http://support.gemalto.com. www.gemalto.com DOC118369C Page 2/4 Prox–SU Quick Installation Guide Prox–SU operation table Card Indicator Description Off The card interface is deactivated Slow Blink (0,2 s / 2 s) The card interface is ready Blink (0,5 s / 1 s) The card is present and inactive (powered off) On The card is present and active (powered on) Flashing The card communication is in progress Note: When no SIM/SAM card is inserted, the yellow indicator will always be off. Prox–SU SIM/SAM installation The contact card is optional and can be inserted into the internal SIM/SAM card connector located into the device: Remove the four screws located on the bottom cabinet Remove the bottom cabinet from the top cabinet Insert the SIM/SAM card into the connector Assemble the bottom cabinet with the top cabinet using the four screws 4 screws location SAM/SIM internal slot SIM or SAM card For installation recommendation of the SIM/SAM card please refer to the Prox–SU installation guide available in the Gemalto web site http://support.gemalto.com. www.gemalto.com DOC118369C Page 3/4 Prox–SU Quick Installation Guide Rating: 5V 200mA - Accessories for use with UL Listed Computers having limited power or class 2 output. Intended to be used with a Limited Power Source. Regulatory information Notice for the USA: FCC Statement The Federal Communications Commission (FCC) Radio Frequency Interference Statement (USA Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Relocate the radio or television antenna. — Plug the equipment away from the radio or television. — Plug the equipment into a different electrical outlet, so that the equipment and the radio or television is on separate electrical circuits. — Make sure that all your peripheral devices are also FCC class B certified. — Make sure you use only shielded cables to connect peripheral devices to your equipment. — Consult your equipment dealer or an experienced radio/television technician for help. Warning: The system verification tests were conducted with Gemalto supported peripheral devices. Cables used with this equipment must be properly shielded to comply with the requirements of the FCC. Changes or modifications not expressly approved by Gemalto could void the user’s authority to operate the equipment. Déclaration de conformité à la directive R&TTE Nous Société GEMALTO Sise à: Avenue du Pic de Bertagne, 13881 GEMENOS Cedex, Déclarons que les produits : Lecteurs de cartes Prox–SU satisfont à la Directive 1999/5/CE du Parlement Européen et du conseil et sont conformes aux normes : (Norme radio) : ETSI EN 302 291-1 (V1.1.1-2005/07) ETSI EN 302 291-2 (V1.1.1-2005/07) (Norme C.E.M) : ETSI EN 301 489-1 (V1.8.1 (2008)) ETSI EN 301 489-3 (V1.48.1 (2002)) (Norme DBT) : EN 60950-1/ A11 Fait à Gémenos, le 10/12/2010 Pierre-André COLLET Responsable Homologations Produits Instructions for disposal of waste equipment by users in private household This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product. www.gemalto.com DOC118369C Page 4/4
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2010:12:22 09:55:31+01:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2010:12:22 09:55:31+01:00 Format : application/pdf Creator : jfschuh Title : Microsoft Word - Prox-SU QIG_C.doc Document ID : uuid:9e3f819c-5ddc-4660-9fc5-e581b95f291c Instance ID : uuid:17b02677-743c-4083-b7f0-52a08e909fab Page Count : 4 Author : jfschuhEXIF Metadata provided by EXIF.tools