GemTek Technology WL201 Data Transmitter User Manual GemtekWL201 Manual

Gemtek Technology Co., Ltd. Data Transmitter GemtekWL201 Manual

Contents

Gemtek Users Manual

Wireless LAN CardQuick Installation GuideGemTek WL201
INFORMATION TO USERFCC REQUIREMENTSThis device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and(2)This device must accept any interference received , including interference that may causeundesired operation.NOTE: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected. consult the dealer of an experienced radio/TVtechnician for help.WL201 Technical SupportIf you encounter problems when installing or using this product , or would like moreinformation about our other products , you can contact us with the telephone numbers listedbelow. Useful informationTEL:886-2-2643-6226FAX:886-2-2643-6221E-Mail: gemtek@ms1.hinet.netWorld Wide Web: www.myshop.com.twFTP Server:11TH FL. , 181 , Ta-Tung Road , Sec. 1 ,HsiChih , Taipei Hsien , Taiwan , R.O.C
CONTENTS1.  PCMCIA Adapter Quick Installation............................ -2.  User Defined Installation......................................... -3.  Usage......................................................................... -
  PCMCIA Adapter Quick InstallationStep 1Power off your computer.Installing WL201 PCMCIA card in the PCMCIA slot, then power on.Windows 95 should recognize the card automatically. When theWL201 had been inserted in PCMCIA slot, it then display a dialogbox titled “New Hardware Found”.Select the“Driver from disk provided by hardware manufacturer”Click “OK”[It should display “Install From Disk“ dialog box.]
Step 2Insert the diskette label [WL201 Utility]into the floppy disk driver.and type “ A:\ ” at copy manufacturer‘s files from:Click “ OK ”Step 3Computer will load softwares from drvier A automatically. Somesoftwares will be copied from original WIN95 CD, following theinstruction displayed on the screen, and type in the source driverwhich contain the WIN95 CD.During the driver software loading, it need other softwares in yourWindows 95 CD, if those don‘t exist in your hard-disk driver, it isnecessary to connect your computer to CD-ROM driver, thenfollowing the instruction displayed on the screen, and type the sourcedriver which contain the Windows 95 CD.
Step 4Computer will display a dialog box titled “System Settings Change”.Drawing out the floppy disk “WL201 Utility” from disk driver A .Click “Yes” to restart computer now.Step 5After the restart procedure, the screen will show a dialog box titled“Enter Network Password”. You can enter your password if it hadbeen set or just click “OK”.
Step 6The screen will show a dialog box titled “GemTek Wireless LANquick configuration wizard for Windows 95”.It is provided to help you to configure and setup the network settingwithout understanding a lot of network knowledge in advance.All you have to do is simply fill some basic information that used inthe peer to peer network environment.Click “Next”.
Step 7The screen will change display to basic information need to setupnetwork like below.Every computer need a unique ID number in your peer to peerworkgroup, assign a unique ID to your each computerin your peer topeer workgroup.Type the PC ID number from 1 to 255.You also can assign & type a unique Computer Name for yourcomputer or let computer assign it automatically.Click “Next”.
Step 8Computer will have network setting automatically. It assign an IPaddress for the computer, open the utility like hard-disk & printer toshare with others in your workgroup, and assign the identification inthe network icon. After all it need to be restart computer to active thenetwork function.Click “Yes‘” to restart your computer now.Step 9After the restart procedure, the screen will show a dialog box titled“Enter Network Password”. You can enter your password if it hadbeen set or just click “OK”.You have finished the quick installation of GemTek WL201 wirelessLAN card in your computer for peer to peer network application. Sothat you can share with each other for file transfer & printer sharingetc.
You can test it by double click the “Network Neighborhood” icon onthe screen, then you will see the others computer on your workgroup.Remark:If you are setting the GemTek WL201 with Access Point whichprovides the extention from wireless LAN peer to peer application802.11 to Ethernet 802.3 environment. Please refer to Access Point &WLAN Card Installation Manual.

Navigation menu