General Dynamics Broand USBSTKAPJ Wireless Broadband Modem User Manual USB Stick LTE RF Exposure Addendum

General Dynamics Broadband, Inc. Wireless Broadband Modem USB Stick LTE RF Exposure Addendum

Contents

USB Stick LTE RF Exposure Addendum

Download: General Dynamics Broand USBSTKAPJ Wireless Broadband Modem User Manual USB Stick LTE RF Exposure Addendum
Mirror Download [FCC.gov]General Dynamics Broand USBSTKAPJ Wireless Broadband Modem User Manual USB Stick LTE RF Exposure Addendum
Document ID2319929
Application IDdNvObJ4H8kI4tJSG9+Y6jw==
Document DescriptionUSB Stick LTE RF Exposure Addendum
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize20.89kB (261147 bits)
Date Submitted2014-07-09 00:00:00
Date Available2014-07-09 00:00:00
Creation Date2014-03-28 12:05:01
Producing SoftwareMicrosoft® Office Word 2007
Document Lastmod2014-03-28 12:05:01
Document TitleUSB Stick LTE RF Exposure Addendum
Document CreatorMicrosoft® Office Word 2007
Document Author: rnichol

Exposure to Radio Frequency Signals
The following information includes important safety guidelines regarding exposure to
radio frequency (RF) signals and the use of electronic devices.
Your modem is a low power radio transmitter and receiver. When it is ON, it receives
and also sends out RF signals. The USB Stick Modem has been evaluated against the
Specific Absorption Rate (SAR) limits defined by the FCC for devices of this type. The
highest reported SAR value complies with the 1.6W/kg averaged over 1g limit.
This USB modem is approved for use in normal size laptop computers only (typically
with 12 inch or larger display screens). To comply with FCC RF exposure requirements,
this modem should not be used in configurations that cannot maintain a distance of at
least 5mm (approximately 0.2 inch) from users and bystanders.
In configurations where the 5mm cannot be maintained consult your service provider
for advice. Examples where this may occur are certain small laptops and tablet
computers or configurations where the USB connectors on the host computer are
unable to provide or ensure the necessary separation between the modem and its
users or bystanders to satisfy the RF exposure compliance requirements.
If you use the modem in accordance with these guidelines, the level of RF exposure
will fall within the guidelines and the standards previously identified.
The modem can be used with the remote antenna accessory, the remote antenna
accessory has been evaluated against the Specific Absorption Rate (SAR) limit and
complies with the 1.6W/kg averaged over 1g limit. Ensure a separation distance of at
least 10mm is maintained between the remote antenna accessory and the user and
bystanders.
The maximum gain of the remote antenna must not exceed 2.0dBi (-0.15dBd),
operating the modem with an antenna gain exceeding this limit may void the user’s
authority to operate the equipment.
IPW-2741 Iss.4

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
Language                        : en-GB
Tagged PDF                      : Yes
Author                          : rnichol
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2014:03:28 12:05:01+00:00
Modify Date                     : 2014:03:28 12:05:01+00:00
Producer                        : Microsoft® Office Word 2007
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PKTUSBSTKAPJ

Navigation menu