General Sensing Systems SPRO30 SMOVE PRO User Manual

General Sensing Systems LLC SMOVE PRO

Contents

User Manual

SMOVE-PRO SPRO30 User Manual V1.00 2017.04
WARNING: ① Please download APP before using iPhone user please search “SMOVE-PRO” in APP STORE Android user please download and install APP from official website Note: IOS system version should be IOS8.0 or above, Android system version should be 5.0 or above ② Clip the smart phone before you turn the device on (smart phone may weigh differently, please adjust the phone to keep the Roll axis in horizontal level, a counterweight may required in some circumstances) 1，Product description The smart phone is used for illustration purpose only. 1， Indicator LED 1 8， Pitch Axis 2， Indicator LED 2 9， Roll Axis 3， Power Switch 10， Yaw Axis 115 9 8 7 6 5 4 3 2 13 12 11 10 14
4， Control stick 11， Charging indicator LED 5， Mode switch button 12， Smart phone/Sport camera quick released screw 6， Horizontal/vertical mode switch button 13， USB charging port 7， Video/Photo button 14， threads 15， Smart phone/sport camera mode switch button Bluetooth: Name：SMOVEPROBT-x Version： Low power consumption bluetooth4.0 Battery： Type：Li-ion Single cell：18650 Voltage：3.7V Capacity：3400Mah Sport camera bracket 2，SMOVE-PRO user guide SMOVE-PRO comes with a control stick to switch to different modes, photo/video, horizontal/vertical mode, smart phone/camera mode. 【1】 Power switch Press power switch, and long press for 3S to turn the SMOVER-PRO ON or OFF. 【2】 Control stick Move the Control stick to Left or Right to control SMOVE-PRO Yaw axis to move Left or Right. Move the Control stick Up or Down to control SMOVE-PRO Pitch axis to move Up or Down. This control mode is continuously variable, and the control directions can be modified on SMOVE-PRO APP. 【3】 Video/Photo button 【4】 When SMOVE-PRO is connected with APP. To take a single photo on phone by Pressing Video/Photo button once, to take a continuous photo by holding Video/Photo button, the video can be closed by another single press. The before/behind camera can be exchanged by double pressing Video/Photo button. 【5】 Horizon/Vertical switch button When SMOVE-PRO is working, Click Horizon/Vertical model switch button can switch between Horizon model and Vertical model. 【6】 Model Switch Button When SMOVE-PRO is working,You can switch full following , semi following and lock model by clicking Model Switch Button. You can exit the dynamic capture model by clicking Model Switch Button twice ,hence back to gimbal original status. 【7】 Smart phone/sport camera mode switch button Pls switch the Smart phone/sport camera mode switch button according to the guide of SMOVE-PRO before charging.(Pls make sure switch before charging, it doesn’t work
during the gimbal’s operation) 【8】 Charging indicator LED status Below chart is the explaination for teh status of SMOVE-PRO during operation. 【9】 Removal Method of Phone and sport camera Either a coin or screwdriver can be used to replace phone arm and sport camera arm. 【10】SMOVE-PRO Charging Whether it’s on or off, SMOVE-PRO can be charged with a laptop or charging treasure, mobile phone charger, car charger , etc.Charger specifications are as follows: （Voltage：5V，Current：<2.1A） 【11】1/4 Screw Thread The 1/4 Screw Thread under the handle can work with selfie stick or tripod. 3，SMOVE-PRO APP Set and Handle Warning: The icon location of Android and iOS may be different, but the function is same. Pls handle the APP according to the guide of APP. 4，Specification Name SMOVE-PRO Dimension 296*106*110mm Weight 475g（Without smartphone） Angle jitter ±0.05° Pitch Angle 270° Roll Angle 270° Heading Angle 360° Following speed <120°/S Suitable Phone mobile phone that is less than 6.1 inch Max Current <3A
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Navigation menu