Geniatech A8D20E Enjoy TV User Manual Contents

Download:
Mirror Download [FCC.gov]
Document ID	3245887
Application ID	SRlNrC9H6ceYyssZnaepCg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	86.75kB (1084403 bits)
Date Submitted	2017-01-04 00:00:00
Date Available	2017-01-04 00:00:00
Creation Date	2016-08-16 03:32:37
Producing Software	Microsoft Office Word 2007
Document Lastmod	2016-08-16 03:32:37
Document Title	Contents
Document Creator	Microsoft Office Word 2007
Document Author:	Sim

Enjoy TV
ENJOY TV Box
User’s Guide
1. Safety Information
Read and understand all instructions before using this product. If damage is caused by
failure to follow the instructions, the warranty does not apply.
1.1 Warning
To reduce the risk of electric shock, DO NOT remove the cover (or back).
DO NOT attempt to repair the product, this could lead to the risk of injury, damage to
the product .
To reduce the risk of fire or electric shock, keep this product away from exposed
direct sunlight, naked flames or heat, large amounts of moisture, dust, and sand.
FCC Note (for U.S.A)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio or television reception, which can be determined by turning the equipment off
and on.
The user is encouraged to try to correct the interference by one or more of the
following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/TV technician for help.
- This class B digital product meets all requirements of the Canadian Interference Causing Equipment Regulations.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
The distance between user and products should be no less than 20cm
1.2 Precautions
Important Safety Instructions
Read these operating instructions carefully before using the unit. Follow all the safety
instructions listed below.
Keep these operating instructions handy for future reference.
1.2.1 Read these instructions.
1.2.2 Keep these instructions.
1.2.3 Heed all warnings.
1.2.4 Follow all instructions.
1.2.5 DO NOT use this apparatus near water.
1.2.6 DO NOT clean with any chemical detergent. Clean only with a dry cloth.
1.2.7 DO NOT block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
1.2.8 DO NOT install near any heat sources such as radiators, heat registers, stoves, or
other apparatus that produce heat.
1.2.9 Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where it exits the apparatus.
1.2.10 Only use attachments/accessories specified by the manufacturer.
1.2.11 Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used , use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
1.2.12 Unplug this apparatus during lightning storms or when unused for long period
of time.
1.2.13 Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as when the power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
1.3 Handling Cautions
1.3.1 DO NOT expose this apparatus to dripping or splashing. Do not put objects
filled with liquids, such as vases on the apparatus.
1.3.2 To turn this apparatus off completely, you must pull the power plug out of the
wall socket. Consequently, the power plug must be easily and readily accessible at all
times.
1.3.3 DO NOT plug multiple electric devices into the same wall socket. Overloading
a socket can cause it to overheat, resulting in a fire.
1.3.4 Before connecting other components to this player, be sure to turn them off.
1.3.5 If the product makes an abnormal noise or produces a burning smell or smoke,
turn off the power switch immediately and disconnect the power plug from the wall
outlet. Then, contact the nearest customer service center for technical assistance. Do
not use the product. Using the product as it is may cause a fire or an electric shock.
2. Introduction
2.1 Package Contents
Enjoy TV Box
User’s Guide
IR Remote Controller (IR RC)
Power Adapter, Input: AC100 ~ 240V, 50/60Hz, Output: 5V, 2A
2.2 Product Features

HDMI input support

ARM CORTEX A53 2.0GHz, RAM is 1G,built in 2G-32G flash memory

Support Dual Band

Powered by Android 5.1 OS

Built in 802.11b/g/n WIFI module, wireless Internet access

USB interface, support mobile HDD, wired/wireless mouse and keyboard

RJ45 10/100M Ethernet interface

Support 1080P video playback

HDMI video output, connect to HDTV for HD video playback

Support weather, calendar, and desktop clock gadgets

Support Flash Player 10.2 for hardware decoding, Flash 11.1 for software
decoding ,play back online video

Support music player, picture player and more family entertainment

Support SD card, 4 USB ports and Google Chrome browser and virtual private
network access

App Installer for application installation from USB/SD card
Display when Power Up
2.6.1 After power up, the TV will first show a green robot then change to “android”
logo during loading. When loading is finished, it will go to Home screen.
2.6.2 Home Screen display.
3. Settings
Using Navigation (4 directions), OK, EXIT, and Menu keys of Remote Controller to
select the options, the option selected will be highlighted and confirmed by pressing
OK key. Same operation for text input if needed.
Select
icon then press OK key.
3.1 WiFi
3.1.1 It will automatically scan ambient WiFi networks when select “ON”.
3.1.2 Connect an available WiFi network. If connect a secured WiFi network,
corresponding password will be input firstly. Or fail to connect and need reset
password.
3.1.3 Once build up the connection with a certain WiFi network successfully,
ATV1220M will connect this WiFi network automatically when restart.
Note: If factory reset, the password of WiFi network have to be reset.
3.2 Ethernet
Connect Box and Router by RJ45 network cable.
Press “ ON” in Ethernet setting, it will connect to network automatically.
3.3 Date usage
Show data usage information.
3.4 More...
3.4.1 VPN
Build and set VPN
3.4.2 Tethering & Portable hotspot
3.4.3 Proxy settings
Setup proxy server
3.5 Sound
3.5.1 Volumes
Increase or decrease sound volumes
3.5.2 Touch Sounds
If enable Touch sound, sound will be heard while move remote controller.
3.6 Display
3.6.1 Font size
Change the font size of OSD
3.6.2 Wireless display
3.7 Storage
Shows the storage used of the OS and SD card.
3.8 Apps
List all apps installed.
You can choose an application and force to shut down the app, uninstall the app, clear
user data, move to SD card and clear cache data.
3.9 Location access
10
3.10 Security
3.11 Language & input
Change OSD language and input method.
The default input method is android standard keyboard.
If you are using our IR remote control, enter into “Default” option and switch to
remote controller input method.
11
3.12 Backup & reset
Back up my data:
You can backup your application data, WiFi password and other settings.
Factory data rest:
You can reset all the settings and apps to factory default.
Note: You might want to backup important data before resetting the box. Once you
choose to rest to factory default, all data/apps will be deleted.
3.13 Add account
12
3.14 Date & Time
Set date, time, time zone and time format
3.15 Accessibility
13
3.16 Developer options
If user want to do some debugging on box by ADB, enable USB debugging, you will
get ADB function by Ethernet or WiFi network.
3.17 About device.
Firmware version under build number.
14
4. Apps Install & Uninstall
OnEnjoyTVBox, you can install apps from Android Market over the Internet or other
sources, such as other online sources, the internal storage and the USB storage device
and SD card that you have mounted onto ENJOYTVBOX.
You also can manage apps on ENJOYTVBOX and SD card, install/uninstall apps,
stop running apps, or select other options.
15
5. Firmware Update
You can download newest firmware from Geniatech Official website:
www.geniatech.com
16
6. Trouble Shooting/FAQ
6.1 No Picture
Refer to the TV user manual for how to select the correct video input channel.
6.2 USB Content cannot be read
. The format of USB storage device is not supported
. The supported memory size is 32G maximum.
. Make sure that this player supports these files.
6.3 Remote Controller cannot respond quickly to the pressing of keys
Make sure that batteries have enough power.
6.4 The firmware updating is not complete after a long time
If you update the firmware over the online service, it may take a long time to
download the firmware update files from the server. To save your time, update the
firmware through the SD card.
17
7. Repairs
If you contact us to repair your player, an administration fee may be charged if either:
An engineer is called out to your home at your request and there is no defect in the
product.
You bring the unit to a repair center and there is no defect in the product.
We will provide you with the amount of the administration fee before we make a
home visit or begin any work on your player.
We recommend you read this manual throughly, search for a solution on line at
www.geniatech.com, or contact Geniatech Customer Care before seeking to repair
your player.
18
8. Specification
CPU
GPU
RAM
ROM
OS
Quad core ARM CORTEX A53 2.0z
Mali 400MP2 @400MHz
1G DDR3
8G, built in 2G-32G Flash memory(optional)
Android 5.1OS
Optional
CEC
USB
DC Input
SD Slot
Video Output
Audio Output
2external USB HOST and 1×Micro USB
5V-2A
Max: 32G
HDMI
HDMI
IR receiver
LAN
WiFi
RJ45 10/100M Ethernet interface
IEEE 802.1 1B/G/N 2.4G wireless Internet access
Audio Decoder
Video Decoder
MPEG
WMA
Others
MP1, MP2, MP3
WMA Ver: 4, 4.1, 7, 8, 9 WMA Pro
WAV, OGG, OGA, FLAC, ALAC, Ape, AAC, M4A, AC3,DTS,RM
Max. Performance:1920x1080p @ 30fps
MPEG
MPEG2
MPEG4
Divx
H.264
Image
DAT, MPEG, MPG, MPE
MPEG, MPE, MPG, M2V, ISD, TS, VOB
AVI, MOV, MP4, MKV, 3GP, 3GPP, FLC
Divx 3, 4, 5(AVI)，Xvid(AVI)
AVI, MOV, MP4, MKV, TS, M2TS, M3TS, M4TS, M5TS, MTS, M4V,
FLV
H.263
AVI, FLV, 3GP, 3GPP, MOV, MP4, 3G2
VC1
AVI, TS
WMV
WMV, AVI
Memory limitation, 8000x8000 pixels
Movie Subtitle
Font Sub-title
Image Sub-title
Storage System
FAT16, FAT32, EXT2, EXT3, NTFS
ASS, SMI, SRT, SSA , TXT
idx/sub
19
9. Trademark Notice
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing LLC in United
States and other countries.
20

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 20
Language                        : zh-CN
Tagged PDF                      : Yes
Title                           : Contents
Author                          : Sim
Creator                         : Microsoft Office Word 2007
Create Date                     : 2016:08:16 03:32:37
Modify Date                     : 2016:08:16 03:32:37
Producer                        : Microsoft Office Word 2007

EXIF Metadata provided by EXIF.tools