Genie Gs 4047 Product Specifications Scissors_Spec_01 12 15

: Genie Genie-Gs-4047-Product-Specifications-722996 genie-gs-4047-product-specifications-722996 genie pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

Self-Propelled Scissor Lifts
™

GS -4047
Specifications
C

E

B

H
F

D

Model

GS-4047

Measurements

US

Metric

Working height maximum*
A Platform height maximum
B Platform height - stowed
C Platform length - outside
- extended
D Platform width - outside
E Height - stowed: folding guardrails
- rails lowered
F Length - stowed
- extended
G Width
H Wheelbase
I Ground clearance - center
- with pothole guards deployed
J
Slide-out platform extension deck
Guardrail height
Toeboard height

45 ft
39 ft
4 ft 5 in
7 ft 5 in
10 ft 5 in
3 ft 9.3 in
8 ft 4 in
6 ft 2
8 ft
11 ft
3 ft 11 in
6 ft 1 in
4 in
0.75 in
3 ft
3 ft 7 in
6 in

13.89 m
11.89 m
1.34 m
2.26 m
3.18 m
1.15 m
2.54 m
1.88 m
2.44 m
3.36 m
1.19 m
1.85 m
0.10 m
1.9 cm
0.91 m
1.10 m
0.15 m

2
550 lbs
Full height
1.9 mph
0.5 mph
25%
zero
91 in
71/41 sec
proportional
dual front wheel
dual rear wheel
15 x 5 x 11 in

2
249 kg

Productivity

I

J
G

Max platform occupancy
Lift capacity
Drive height
Drive speed - stowed
Drive speed - raised
Gradeability - stowed**
Turning radius - inside
Turning radius - outside
Raise/lower speed 71/41 sec
Controls
Drive
Multiple disc brakes
Tires solid non-marking

3.1 km/h
0.8 km/h
25%
zero
2.3 m
proportional
dual front wheel
dual rear wheel
38 x 13 x 28 cm

Power
Power source
Hydraulic system capacity

24 V DC, 300 Ah (four 12 V, 150 Ah batteries
in parallel series)
7.91 gal
36 L

A

Weight***
Base machine

Standards Compliance

7,185 lbs

3,260 kg

ANSI A92.6, CSA B354.2, CE Compliance, AS 1418.10

* The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height.
** Gradeability applies to driving on slopes. Gradeability may vary depending on the weight of options
installed on machine. See operator’s manual for details regarding slope ratings.
*** Weight will vary depending on options and/or country standards.

www.genielift.com

Self-Propelled Scissor Lifts
™

GS -4047
Features
Standard Features

Options & Accessories

Measurements

Productivity Options

GS-4047
• 45 ft (13.89 m) working height
• Up to 550 lbs (249 kg) lift capacity

•
•
•
•

Productivity
• Drive at full height
• Folding guardrails with full height
swing gate
• Smart Link™ - proportional lift and drive
• Platform control with battery
charge indicator
• AC power to platform
• Lanyard attachment points
• Manual platform lowering valve
• Emergency stop at both platform and
ground controls
• Rear wheel multiple disc brakes
• Front wheel hydraulic dynamic braking
• Manual brake release
• Swing-out component trays
• Pothole guards
• Tilt level sensor with audible alarm
• Descent alarm
• Electronic horn
• Hour meter
• AC power to platform

Air line to platform
Dual flashing beacons
Motion alarm
Automotive-style horn

Power Options
• Power inverter (120 V/60 Hz)

Power
• 24 V DC battery pack
• 24 V DC, 300 Ah (four 12 V 150 Ah
batteries in parallel series)
• Universal 20 amp smart charger

Platform
• 7 ft 5 in x 3 ft 9.3 in (2.26 x 1.15 m) steel
platform
• 3 ft 9.3 in (0.91 m) extension deck

Drive
• Dual front wheel drive

Tires
• Solid non-marking

Genie United States

Distributed By:

18340 NE 76th Street
P.O. Box 97030
Redmond, Washington 98073-9730
Telephone +1 (425) 881-1800
Toll Free in USA/Canada +1 (800)-536-1800
Fax +1 (425) 883-3475

Effective Date: January, 2015. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for
instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment
is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their
subsidiaries in the USA and many other countries. Genie is a registered trademark of Terex South Dakota, Inc. © 2015 Terex Corporation.
GS47 0210I

www.genielift.com



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Sean
Create Date                     : 2015:01:12 12:31:05-08:00
Modify Date                     : 2015:01:12 12:31:05-08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : Scissors_Spec_01-12-15.indd
Creator                         : Sean
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:3bbf4609-bff0-430f-9c2e-f15cf98e9e01
Instance ID                     : uuid:bd13b5b4-de81-4a00-a736-3ca95f69feca
Page Count                      : 2

EXIF Metadata provided by EXIF.tools