Genie S 125 Product Specifications Booms_Spec_1 22 14
2015-05-27
: Genie Genie-S-125-Product-Specifications-722963 genie-s-125-product-specifications-722963 genie pdf
Open the PDF directly: View PDF 
.
Page Count: 2
www.genielift.com
S™-120 & S™-125
Self-Propelled Telescopic Booms
Models S™-120 S™-125
* The metric equivalent of working height adds 2 m to platform height.
U.S. adds 6 ft to platform height.
** Gradeability applies to driving on slopes. See operator’s manual for
details regarding slope ratings.
*** Weight will vary depending on options and/or country standards.
Range Of Motion STM-120
Range Of Motion STM-125
Measurements US Metric US Metric
Working height maximum* 126 ft 38.58 m 131 ft 2 in 40.15 m
Platform height maximum 120 ft 36.58 m 125 ft 2 in 38.15 m
Horizontal reach maximum 75 ft 22.86 m 80 ft 24.38 m
Below ground reach 6 ft 6 in 1.98 m 10 ft 9 in 3.27 m
Platform length - 8 ft model 3 ft 0.91 m 3 ft 0.91 m
Platform length - 6 ft model 2 ft 6 in 0.76 m 2 ft 6 in 0.76 m
Platform width - 8 ft model 8 ft 2.44 m 8 ft 2.44 m
Platform width - 6 ft model 6 ft 1.83 m 6 ft 1.83 m
Height - stowed 10 ft 1 in 3.07 m 10 ft 1 in 3.07 m
Length - stowed 42 ft 8 in 13.00 m 46 ft 9 in 14.25 m
Length - transport (jib tucked under) ——— ——— 39 ft 11 in 12.17 m
Width - axles retracted 8 ft 1 in 2.46 m 8 ft 1 in 2.46 m
Width - axles extended 11 ft 1 in 3.38 m 11 ft 1 in 3.38 m
Wheelbase 12 ft 3.66 m 12 ft 3.66 m
Ground clearance - center 1 ft 5 in 0.38 m 1 ft 5.5 in 0.38 m
Productivity
Lift capacity 750 lbs 340 kg 500 lbs 227 kg
Platform rotation 160° 160°
Vertical jib rotation ——— 135°
Turntable rotation 360° continuous 360° continuous
Turntable tailswing - axle retracted 5 ft 6 in 1.68 m 5 ft 6 in 1.68 m
Turntable tailswing - axle extended 4 ft 1 in 1.24 m 4 ft 1 in 1.24 m
Drive speed - stowed 3.0 mph 4.8 km/h 3.0 mph 4.8 km/h
Drive speed - raised below 80 ft 0.68 mph 1.1 km/h 0.68 mph 1.1 km/h
Drive speed - raised above 80 ft 0.34 mph .55 km/h 0.34 mph .55 km/h
Gradeability - stowed** 40% 40%
Turning radius - axle retracted: inside 13 ft 2 in 4.01 m 13 ft 2 in 4.01 m
outside 22 ft 2 in 6.75 m 22 ft 2 in 6.75 m
Turning radius - axle extended: inside 8 ft 6 in 2.59 m 8 ft 6 in 2.59 m
outside 18 ft 10 in 5.74 m 18 ft 10 in 5.74 m
Controls 12 V DC proportional 12 V DC proportional
Tires - RT lug 445/65 D22.5 445/65 D22.5
Power
Power source Deutz TD 2011 L04i 4-cylinder turbo diesel, 74 hp (55 kW)
Perkins 804D-33T 4-cylinder turbo diesel, 74 hp (55 kW)
Auxiliary power unit 12 V DC 12 V DC
Hydraulic tank capacity 55 gal 208 L 55 gal 208 L
Fuel tank capacity 40 gal 151 L 40 gal 151 L
Weight***
4WD 44,340 lbs 20,112 kg 44,640 lbs 20,248 kg
Standards Compliance ANSI A92.5, CSA B354.4, EN 280, AS 1418.10
Specifi cations
A
B
C
D
E
F
G
A A
B B
C C
D D
E E
F F
G G
Effective Date: January, 2014. Product speci cations and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for
instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment
is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their
subsidiaries in the USA and many other countries. Genie is a registered trademark of Terex South Dakota, Inc. © 2014 Terex Corporation.
Genie United States
18340 NE 76th Street
P.O. Box 97030
Redmond, Washington 98073-9730
Telephone +1 (425) 881-1800
Toll Free in USA/Canada +1 (800)-536-1800
Fax +1 (425) 883-3475
Distributed By:
Features
www.genielift.com
S™-120 & S™-125
Self-Propelled Telescopic Booms
Platform Options
• Steel 8 ft (2.44 m) (standard)
• Steel 6 ft (1.83 m)
• Steel 8 ft (2.44 m) tri-entry
Jib Options
• Non-jib (S-100 only)
• 5 ft (1.52 m) jib boom (S-105 only)
Engine Options
• 74 hp (55 kW) Deutz diesel
Tier 4i (Standard)
• 74 hp (55 kW) Perkins diesel Tier 4i
Drive/Steer
• 4WD (standard)
• 4WS (standard)
Axle
• Extendable axles (standard)
Tire
• Rough terrain foam-filled (standard)
Productivity Options
• Half-mesh platform inserts with
swing gate
• Platform top auxiliary rail
• Welder package
• Deluxe hostile environment kit
• Thumb rocker steer
• Tool tray
• Light package
• Entry toe boards
• Pipe cradle (pair)
• Panel cradle package
• Operator protective structure
Power Options
• Cold weather kit
• Diesel scrubber/catalytic muffler
• Intake air pre-cleaner
Options & Accessories
Measurements
S™-120
• 126 ft (38.58 m) working height
• 75 ft (22.86 m) horizontal reach
• 750 lb (340 kg) lift capacity
S™-125
• 131 ft 2 in (40.15 m) working height
• 80 ft (24.38 m) horizontal reach
• 500 lb (227 kg) lift capacity
Productivity
• Self-leveling platform
• 160° hydraulic platform rotation
• Proportional joystick controls
• Hydraulic oil cooler
• Drive enable
• AC power cord to the platform
• Horn
• Hour meter
• Tilt alarm
• Descent alarm
• 360° continuous turntable rotation
• Positive traction 4WD
• Two speed wheel motors
• Four wheel high angle steer
• Four steering modes: front, rear, crab and
coordinated
• Four wheel brakes
• Configurable controls to limit lift height to
91 ft (27.74 m)
• On board full diagnostics and engine
monitoring display
• Configurable controls to limit lift height to
80 ft (24.38 m)
• Platform work lights
• Lockable platform control box cover
Power
• 12 V DC auxiliary power
• Anti-restart engine protection
• Auto engine fault shutdown
• Swing out engine tray
• Welder ready 12.5 kW AC generator
Easily Confi gured To Meet Your Needs Standard Features
S120 0210L. Part No. 109371
