Gentex UAGTMA Integrated Toll RFID Device User Manual UAGTMA Rev 2 0

Download:
Mirror Download [FCC.gov]
Document ID	3888549
Application ID	FFAbeskCZPgO2RHoEVwEEw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.44kB (93024 bits)
Date Submitted	2018-06-14 00:00:00
Date Available	2018-06-14 00:00:00
Creation Date	2018-06-01 16:20:36
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2018-06-01 16:20:36
Document Title	Microsoft Word - Users Manual - UAGTMA Rev. 2.0
Document Creator	PScript5.dll Version 5.2.2
Document Author:	brian.miller

The Integrated Toll Module® (ITM®) is a universal toll transponder integrated within a vehicle that implements multiple
protocols available in the tolling industry. ITM eliminates the need for windscreen‐mounted toll transponders and
provides the ability to set the number of occupants in the vehicle for additional areas that utilize High Occupancy Vehicle
(HOV) or High Occupancy Toll (HOT) systems.
Precautions!


ITM must be registered with the applicable tolling authority/service before it is used in tolling areas.
The occupant setting must be maintained and updated by the vehicle driver in accordance to the rules set forth
by the tolling authority within the region of travel. Failure to do so may result in a higher toll charge assessed or
enforcement such as a violation or fine.
Information specific to the registration of ITM, how to turn it on and off and how to set the number of occupants can be
found in the details of the vehicle’s owner manual and/or Multi‐Media Interface (MMI).
FCC (USA) and ISED (Canada)
This device complies with FCC rules part 90 and Innovation, Science, and Economic Development Canada RSS‐137.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This
device must accept any interference that may be received including interference that may cause undesired operation.
WARNING: The transmitter has been tested and complies with FCC and ISED rules. Changes or modifications not
expressly approved by the party responsible for compliance could void the user’s authority to operate the device.
This equipment complies with FCC and ISED radiation exposure limits set forth for an uncontrolled environment. End
Users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must be
at least 20 cm from the user and must not be co‐located or operating in conjunction with any other antenna or
transmitter.
FCC (États‐Unis) et ISED (Canada)
Cet appareil est conforme aux règlements de la FCC, section 90, et au CNR‐137 d’Innovation, Sciences et Développement
économique Canada. Le fonctionnement est assujetti aux deux conditions suivantes : (1) cet appareil ne doit pas causer
d’interférences nuisibles et (2) cet appareil doit accepter toute interférence reçue, y compris celle qui pourrait
entraîner un dysfonctionnement. MISE EN GARDE : L’émetteur a subi des tests et est conforme aux règlements de la
FCC et d’ISDE. Les changements ou modifications non approuvés explicitement par la partie responsable de la
conformité pourraient rendre caduque l’autorisation de l’utilisateur de se servir du dispositif.
Cet appareil est conforme aux limites d’exposition aux radiations de la FCC et d’ISDE établies pour un environnement non
contrôlé. Les utilisateurs finaux doivent respecter les instructions d’utilisation spécifiques pour satisfaire aux exigences
de conformité aux expositions de RF. L’émetteur doit se trouver à 20 cm au minimum de l’utilisateur et ne doit pas être
situé au même endroit que tout autre émetteur ou antenne ni fonctionner avec un autre émetteur ou antenne.
Note: Integrated Toll Module® and ITM® are Registered Trademarks of Gentex Corporation

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : brian.miller
Create Date                     : 2018:06:01 16:20:36-04:00
Modify Date                     : 2018:06:01 16:20:36-04:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - Users Manual - UAGTMA Rev. 2.0
Creator                         : brian.miller
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:5cb611ee-7f2d-4d45-948d-8fe7d7162617
Instance ID                     : uuid:20e9a501-e2f1-46a3-877a-f95b58b2923b
Page Count                      : 1

EXIF Metadata provided by EXIF.tools