Geophysical Survey Systems 5106 5106 Antenna User Manual QF75106 Manual

Geophysical Survey Systems, Inc. 5106 Antenna QF75106 Manual

Contents

  • 1. Manual
  • 2. Manual prohibition of use as wall imager

Manual prohibition of use as wall imager

Download: Geophysical Survey Systems 5106 5106 Antenna User Manual QF75106 Manual
Mirror Download [FCC.gov]Geophysical Survey Systems 5106 5106 Antenna User Manual QF75106 Manual
Document ID265846
Application IDlrgBgeULWMpRMrhsAwLB1w==
Document DescriptionManual prohibition of use as wall imager
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize0.8kB (9950 bits)
Date Submitted2002-08-26 00:00:00
Date Available2002-09-12 00:00:00
Creation Date2002-08-13 14:47:32
Producing SoftwareAcrobat PDFWriter 4.0 for Windows
Document Lastmod2002-08-13 14:47:55
Document TitleQF75106 Manual
Document CreatorMN30-191 Rev A Model 5106 Manual US.doc - Microsoft Word

Geophysical Survey Systems, Inc.
Model 5106 Antenna
System Settings and User Notes
FCC NOTICES:
This device complies with part 15 of the FCC Rules:
Operation is subject to the following conditions:
1. This device many not cause harmful interference, and
2. This device must accept any interference received, Including interference that may cause undesired
operation
Warning:
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Operation of this device is restricted to law enforcement, fire and rescue officials, scientific
research institutes, commercial mining companies, and construction companies. Operation by
any other party is a violation of 47 U.S.C. § 301 and could subject the operator to serious legal
penalties.
Coordination Requirements.
(a) UWB imaging systems require coordination through the FCC before the equipment may be
used. The operator shall comply with any constraints on equipment usage resulting from this coordination.
(b) The users of UWB imaging devices shall supply detailed operational areas to the FCC Office of
Engineering and Technology who shall coordinate this information with the Federal Government through the
National Telecommunications and Information Administration. The information provided by the UWB operator
shall include the name, address and other pertinent contact information of the user, the desired geographical
area of operation, and the FCC ID number and other nomenclature of the UWB device. This material shall be
submitted to the following address:
Frequency Coordination Branch., OET
Federal Communications Commission
445 12th Street, SW
Washington, D.C. 20554
ATTN: UWB Coordination
(d) Users of authorized, coordinated UWB systems may transfer them to other qualified users and
to different locations upon coordination of change of ownership or location to the FCC and coordination with
existing authorized operations.
(e) The NTIA/FCC coordination report shall include any needed constraints that apply to day-to-day
operations. Such constraints could specify prohibited areas of operations or areas located near authorized
radio stations for which additional coordination is required before operation of the UWB equipment. If
additional local coordination is required, a local coordination contact will be provided.
(f) The coordination of routine UWB operations shall not take longer than 15 business days from
the receipt of the coordination request by NTIA. Special temporary operations may be handled
with an expedited turn-around time when circumstances warrant. The operation of UWB
systems in emergency situations involving the safety of life or property may occur without
coordination provided a notification procedure, similar to that contained in CFR47 Section
2.405(a)-(e), is followed by the UWB equipment user.
NOTICE: Use of this device as a wall imaging system is prohibited by FCC regulations.
Manual MN30-191 Rev A

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2002:08:13 14:47:55-04:00
Create Date                     : 2002:08:13 14:47:32-04:00
Title                           : QF75106 Manual
Creator                         : MN30-191 Rev A Model 5106 Manual US.doc - Microsoft Word
Producer                        : Acrobat PDFWriter 4.0 for Windows
Page Count                      : 1
EXIF Metadata provided by EXIF.tools
FCC ID Filing: QF75106

Navigation menu