Getac Technology 048 Notebook Computer User Manual

Getac Technology Corp. Notebook Computer

Users manual - Pt 1

   Rugged Mobile Computing Solutions V200USER’S MANUAL
Aug. 2012  TRADEMARKSTRADEMARKSTRADEMARKSTRADEMARKS The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. All brand and product names are trademarks or registered trademarks of their respective companies. NOTENOTENOTENOTE The information in this manual is subject to change without notice. Most screens and operating instructions in this manual are based on Windows 7. If you’re using a different version of Windows, the screens and related operations
may not be the same. For the latest version of the manual, please visit the Getac website at www.getac.com.  ENERGY STAR® is a government program that offers businesses and consumers energy-efficient solutions, making it easy to save money while protecting the environment for future generations. Please reference ENERGY STAR® related information from www.energystar.gov. As an ENERGY STAR® Partner, Getac Technology Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. An ENERGY STAR® qualified computer uses 70 % less electricity than computers without enabled power management features. Earning the Earning the Earning the Earning the EEEENERGY NERGY NERGY NERGY SSSSTARTARTARTAR®®®®    When every home office is powered by equipment that has earned the ENERGY STAR®, the change will keep over 289 billion pounds of greenhouse gases out of the air. If left inactive, ENERGY STAR® qualified computers enter a low-power mode and may use 15 watts or less. New chip technologies make power management features more reliable, dependable, and user-friendly than even just a few years ago. Spending a large portion of time in low-power mode not only saves energy, but helps equipment run cooler and last longer.
Businesses that use ENERGY STAR® enabled office equipment may realize additional savings on air conditioning and maintenance. Over its lifetime, ENERGY STAR® qualified equipment in a single home office (e.g., computer, monitor, printer, and fax) can save enough electricity to light an entire home for more than 4 years. Power management (“sleep settings”) on computers and monitors can result in much savings annually.  Remember, saving energy prevents pollutionRemember, saving energy prevents pollutionRemember, saving energy prevents pollutionRemember, saving energy prevents pollution    Because most computer equipment is left on 24 hours a day, power management features are important for saving energy and are an easy way to reduce air pollution. By using less energy, these products help lower consumers’ utility bills, and prevent greenhouse gas emissions.
i Table of ContentsTable of ContentsTable of ContentsTable of Contents    Chapter 1Chapter 1Chapter 1Chapter 1    GGGGetting Startedetting Startedetting Startedetting Started    ........................................................................................................................................................................................    1111----1111Getting the Computer Running ......................................... 1-2Unpacking ................................................................ 1-2Connecting to AC Power ............................................ 1-3Opening and Closing the Cover ................................... 1-4Operating in Tablet Mode ........................................... 1-5Turning On and Off the Computer ............................... 1-7Taking a Look at the Computer ...................................... 1-8Front Components ..................................................... 1-8Rear Components ..................................................... 1-10Right-Side Components ............................................. 1-11Left-Side Components ............................................... 1-12Top-open Components .............................................. 1-13Bottom Components .................................................. 1-15Using the Accessories .................................................. 1-17Using the Tether ..................................................... 1-17Attaching the Handgrip Strap ...................................... 1-18Attaching the Shoulder Strap ...................................... 1-18Chapter Chapter Chapter Chapter 2222    OOOOperating Your Computerperating Your Computerperating Your Computerperating Your Computer    ....................................................................................................................    2222----1111Using the Internal Keyboard ............................................2-2Typewriter Keys ........................................................2-2Cursor-Control Keys ..................................................2-2
iiNumeric Keypad .......................................................2-3Function Keys ..........................................................2-4Fn Key ...................................................................2-4Hot Keys ................................................................2-4Using the Touchpad ......................................................2-7Configuring the Touchpad ............................................2-9Navigating on the Screen ............................................. 2-10Using the Touchscreen ............................................. 2-10Using Multi-touch Gestures ........................................ 2-11Using the Dual Mode Display (Optional) .................... 2-13Using Landscape or Portrait View ............................... 2-15Using the Input Panel ................................................. 2-17Using the Network Features ........................................... 2-18Using the Modem ................................................... 2-18Using the LAN ....................................................... 2-19Using the Wireless LAN ........................................... 2-19Using the Bluetooth Feature ......................................... 2-21Turning Off/On the Bluetooth Radio ........................... 2-21Connecting to another Bluetooth Device ....................... 2-21Using the WWAN Feature (Optional) ............................ 2-23Installing a SIM Card .............................................. 2-23Turning Off/On the WWAN Radio .............................. 2-24Connecting to WWAN Network ................................... 2-25Using the Fingerprint Scanner (Optional)........................ 2-27Chapter Chapter Chapter Chapter 3333    MMMManaging anaging anaging anaging PowerPowerPowerPower    ....................................................................................................................................................................................    3333----1111AC Adapter .................................................................3-2Battery Pack ................................................................3-3Charging the Battery Pack ..........................................3-3Initializing the Battery Pack .........................................3-4
iii Checking the Battery Level .........................................3-4Replacing the Battery Pack .........................................3-5Battery Low Signals and Actions ..................................3-6Power Management .......................................................3-8Hibernation ...............................................................3-9Power-Saving Tips ..................................................... 3-10Chapter Chapter Chapter Chapter 4444    EEEExpanding Your Computerxpanding Your Computerxpanding Your Computerxpanding Your Computer    ................................................................................................................    4444----1111Connecting an External Monitor .......................................4-2Connecting a Serial Device.............................................4-3Connecting a USB Device ..............................................4-4Connecting an IEEE 1394 Device ....................................4-5Connecting Audio Devices ..............................................4-6Using ExpressCards ......................................................4-7Using PC Cards...........................................................4-9Using Smart Cards (Optional) ...................................... 4-11Using Storage Cards ................................................... 4-12System Memory Upgrade.............................................. 4-13Chapter Chapter Chapter Chapter 5555    UUUUsing BIOS Setup and System Recoverysing BIOS Setup and System Recoverysing BIOS Setup and System Recoverysing BIOS Setup and System Recovery    ........................    5555----1111BIOS Setup .................................................................5-2When and How to Use .............................................5-2Information Menu ......................................................5-3Main Menu ..............................................................5-4Advanced Menu ........................................................5-5Security Menu ........................................................ 5-12Boot Menu ............................................................ 5-14Exit Menu ............................................................. 5-15System Recovery ........................................................ 5-17
ivChapter Chapter Chapter Chapter 6666    UUUUsing Getac Softwaresing Getac Softwaresing Getac Softwaresing Getac Software    ................................................................................................................................................    6666----1111Using the OSD Control Panel .........................................6-2Quick Button Setup ...................................................6-6Using Button Manager ...................................................6-8Using G-Manager ....................................................... 6-10Starting G-Manager ................................................. 6-10System Tab ............................................................ 6-11Battery Tab ........................................................... 6-12ECO Tab .............................................................. 6-14Light Sensor Tab .................................................... 6-16Ignition Tab ........................................................... 6-18Monitoring Tab ....................................................... 6-19GPS Status Tab ..................................................... 6-20Using Getac Camera ................................................... 6-22Taking Pictures ....................................................... 6-24Shooting Videos ...................................................... 6-26Using View Mode ................................................... 6-27Camera Settings ..................................................... 6-31Chapter Chapter Chapter Chapter 7777    CCCCaring for the Computeraring for the Computeraring for the Computeraring for the Computer    ............................................................................................................................    7777----1111Protecting the Computer .................................................7-2Using an Anti-Virus Strategy .......................................7-2Using Action Center (for Windows 7) .........................7-2Using the Cable Lock ................................................7-3Taking Care of the Computer .........................................7-4Location Guidelines ....................................................7-4General Guidelines ....................................................7-5Cleaning Guidelines ...................................................7-5Battery Pack Guidelines ..............................................7-6Touchscreen Guidelines...............................................7-7
v When Traveling ............................................................7-9    Chapter Chapter Chapter Chapter 8888    ....................................................................................................................................................................................................    TTTTroubleshootingroubleshootingroubleshootingroubleshooting    8888----1111Preliminary Checklist ......................................................8-2Solving Common Problems .............................................8-3Battery Problems .......................................................8-3Bluetooth Problems ....................................................8-3Display Problems ......................................................8-4Hardware Device Problems ..........................................8-5Hard Disk Drive Problems ..........................................8-5Keyboard, Mouse, and Touchpad Problems ....................8-6LAN Problems ..........................................................8-6Modem Problems ......................................................8-7Power Management Problems ......................................8-7Software Problems .....................................................8-8Sound Problems .......................................................8-8Startup Problems .......................................................8-9WLAN Problems .......................................................8-9Other Problems ....................................................... 8-11Resetting the Computer ................................................ 8-12Appendix A SAppendix A SAppendix A SAppendix A Specificationspecificationspecificationspecifications    ................................................................................................................................................................................    AAAA----1111Appendix Appendix Appendix Appendix B RB RB RB Regulatory Informationegulatory Informationegulatory Informationegulatory Information    ................................................................................................................    BBBB----1111On the Use of the System ........................................... B-2Class B Regulations ................................................. B-2UL1604 Installation Instructions .................................... B-3Safety Notices ......................................................... B-4On the Use of the RF Device ...................................... B-7USA and Canada Safety Requirements and Notices ........ B-7European Union CE Marking and Compliance Notices ..... B-10
vi
Getting Started   1-1Chapter 1Chapter 1Chapter 1Chapter 1     Getting StartedGetting StartedGetting StartedGetting Started    Congratulations on purchasing this rugged computer. This chapter first tells you step by step how to get the computer up and running. Then, you will find a section briefly introducing the external components of the computer.
 1-2   Getting Started Getting the Computer RunningGetting the Computer RunningGetting the Computer RunningGetting the Computer Running    This section guides you through the procedures for getting the computer ready for operation. UnpackingUnpackingUnpackingUnpacking    After unpacking the shipping carton, you should find these standard items: Notebook computer Accessories: − AC adapter − AC power cord − Shoulder strap − Handgrip strap − Stylus and tether − Digitizer pen (option) − Driver disc − Documents Inspect all the items. If any item is damaged or missing, notify your dealer immediately. Keep the shipping carton and packing materials in case you need to ship or store the computer in the future.
Getting Started   1-3Connecting to AC PowerConnecting to AC PowerConnecting to AC PowerConnecting to AC Power    The computer operates either on the external AC power or internal battery power. It is suggested that you use AC power when you start up the computer for the very first time. CAUTION: Use only the AC adapter included with your computer. Using other AC adapters may damage the computer.  1. Plug the DC cord of the AC adapter to the power connector of the computer (). 2. Plug the female end of the AC power cord to the AC adapter and the male end to an electrical outlet ().  3. When the AC adapter is connected, power is being supplied from the electrical outlet to the AC adapter and onto your computer. Now, you are ready to turn on the computer. CAUTION: When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the computer. A reverse procedure may damage the AC adapter or the computer.
 1-4   Getting Started When unplugging the connector, always hold the plug head. Never pull on the cord. NOTE: When the AC adapter is connected, it also charges the battery pack. For information on using battery power, see Chapter 3.  Opening and Closing the CoverOpening and Closing the CoverOpening and Closing the CoverOpening and Closing the Cover    To open the top cover: 1. Pull loose the cover latch () and release the clamp (). 2. Lift up the cover (). You can tilt the cover forward or backward for optimal viewing clarity.  To close the top cover: 1. Close the display.
Getting Started   1-52. Lift the cover latch and engage the clamp on the display.  Then, push in the cover latch to click it into place. Operating in Tablet ModeOperating in Tablet ModeOperating in Tablet ModeOperating in Tablet Mode    In addition to being used as a regular notebook computer (Laptop mode), your computer can also be operated in Tablet mode. In Tablet mode, you operate the computer with a stylus or digitizer pen, or a fingertip, instead of a keyboard or mouse. 1. Open the top cover so that it is almost perpendicular with the keyboard of the computer. 2. Turn the display counter-clockwise by 165o.  CAUTION: Do not rotate the display more than 165o, or attempt to rotate the display clockwise.  3. Close the computer with the display facing up.
 1-6   Getting Started  4. Lift the cover latch and engage the clamp on the display.  Then, push in the cover latch to click it into place. In Tablet mode, the computer can be operated while holding it as shown. A handgrip strap is supplied to help you hold the computer. (See “Attaching the Handgrip Strap” in this chapter for installation instructions.)
Getting Started   1-7Turning On and Off the ComputerTurning On and Off the ComputerTurning On and Off the ComputerTurning On and Off the Computer    Turning OnTurning OnTurning OnTurning On    Press the power button (      ). Each time the computer is turned on, it performs a Power-On Self Test (POST), and the operating system such as Windows should start.  Turning OTurning OTurning OTurning Offffffff    When you finish a working session, you can stop the system by turning off the power or leaving it in Sleep or Hibernation mode: To...To...To...To...    Do this...Do this...Do this...Do this...    Power off (Shutdown) Use the Windows Start menu in the lower left and follow the shutdown procedure. Sleep  Press the power button*. –or– Use the Windows Start menu to put the computer in Sleep mode.Hibernate  Use the Windows Start menu to put the computer in Hibernation mode. (See “Hibernation” in Chapter 3 for more information.)* “Sleep” is the default setting of the power button. You may change what the power button does in Windows Control Panel.
 1-8   Getting Started Taking a Look at the ComputerTaking a Look at the ComputerTaking a Look at the ComputerTaking a Look at the Computer    NOTE:Depending on the model you purchased, the appearance of your computer may not be exactly the same as those shown in this manual. You need to open the protective covers to access the connectors. When not using a connector, make sure to close the cover completely for water- and dust-proof integrity. (Engage the locking mechanism if existing.)  Front ComponentsFront ComponentsFront ComponentsFront Components     RefRefRefRef    ComponentComponentComponentComponent    DescriptionDescriptionDescriptionDescription    See AlsoSee AlsoSee AlsoSee Also  Strap HolderStrap HolderStrap HolderStrap Holder    Two buckles hold the shoulder strap.  P. 1-18Stereo Stereo Stereo Stereo SpeakerSpeakerSpeakerSpeaker    Sends out sound and voice from your computer.OSD Control OSD Control OSD Control OSD Control Button Button Button Button      Opens or closes the OSD (On Screen Display) control panel. P. 6-2P1 ButtonP1 ButtonP1 ButtonP1 Button    Can be re-defined using the Button Manager utility. P.  6-8SunlightSunlightSunlightSunlight----    reareareareadable dable dable dable ButtonButtonButtonButton        Toggles the sunlight-readable mode on or off. In sunlight-readable mode, the display brightness is increased to the highest level.
Getting Started   1-9RefRefRefRef    ComponentComponentComponentComponent    DescriptionDescriptionDescriptionDescription    See AlsoSee AlsoSee AlsoSee Also       CAUTION: To prevent burns to your fingers if using the computer (especially in Tablet Mode) with sunlight-readable mode turned on, do wear gloves when touching the top portion of the LCD display as it may be hot to the touch. P2P2P2P2    ButtonButtonButtonButton    Can be re-defined using the Button Manager utility. P.  6-8RF Button RF Button RF Button RF Button      Serves as the master on/off control of the RF radio.P3P3P3P3    ButtonButtonButtonButton    Can be re-defined using the Button Manager utility. P.  6-8Reset Button Reset Button Reset Button Reset Button     Serves as the CtrlCtrlCtrlCtrl+AltAltAltAlt+DelDelDelDel keyboard keys.  P. 8-12P4P4P4P4    ButtonButtonButtonButton    Can be re-defined using the Button Manager utility. P.  6-8Software Software Software Software Keyboard Keyboard Keyboard Keyboard Button Button Button Button      Opens or closes the software keyboard on your screen. P. 2-17P5P5P5P5    ButtonButtonButtonButton    Can be re-defined using the Button Manager utility. P.  6-8Top Cover Top Cover Top Cover Top Cover LatchLatchLatchLatch    Locks the top cover.  P. 1-4Power Power Power Power ButtonButtonButtonButton        Turns the power on or off (Sleep mode by default). P. 1-7
 1-10   Getting Started Rear ComponentsRear ComponentsRear ComponentsRear Components      RefRefRefRef    ComponentComponentComponentComponent    DescriptionDescriptionDescriptionDescription    See AlsoSee AlsoSee AlsoSee Also  Audio Output Audio Output Audio Output Audio Output ConnectorConnectorConnectorConnector    Connects a set of headphones, external speakers with amplifier, or an audio recording device. P. 4-6Mini IEEE 1394 Mini IEEE 1394 Mini IEEE 1394 Mini IEEE 1394 PortPortPortPort    Connects an IEEE 1394 device such as a scanner, printer, DVCAM, and VCR.  P. 4-5Microphone Microphone Microphone Microphone ConnectorConnectorConnectorConnector    Connects an external microphone.  P. 4-6USB 2.0 PortUSB 2.0 PortUSB 2.0 PortUSB 2.0 Port    Connects a USB device, such as a flash disk, printer, digital camera, joystick, and more. P. 4-4Kensington LockKensington LockKensington LockKensington Lock    Locks the computer to a stationary object for security. P. 7-3VGA ConnectorVGA ConnectorVGA ConnectorVGA Connector    Connects an external display monitor. (Depending on your model, this port could be a serial connector.) P. 4-2Serial ConnectorSerial ConnectorSerial ConnectorSerial Connector    Connects a serial mouse or serial communication device. P. 4-3
Getting Started   1-11RightRightRightRight----Side ComponentsSide ComponentsSide ComponentsSide Components     RefRefRefRef    ComponentComponentComponentComponent    DescriptionDescriptionDescriptionDescription    See AlsoSee AlsoSee AlsoSee Also  StylusStylusStylusStylus    Serves as the input device by tapping on the touchscreen to make selections and enter information. NOTE: Some models do not have the stylus slot on this side, so you can only use the slot on the left side for storing the stylus. P. 2-10Tether HoleTether HoleTether HoleTether Hole    Stylus can be tethered to this hole. NOTE: Depending on your model, this is on both sides of the computer or on the left side only. P. 1-17Battery Pack Battery Pack Battery Pack Battery Pack Compartment Compartment Compartment Compartment  Inside is the battery pack that supplies power to your computer when external power is not connected. P. 3-3Hard Disk Drive Hard Disk Drive Hard Disk Drive Hard Disk Drive Compartment Compartment Compartment Compartment     Inside is the hard disk drive.
 1-12   Getting Started LeftLeftLeftLeft----Side ComponentsSide ComponentsSide ComponentsSide Components      RefRefRefRef    ComponentComponentComponentComponent    DescriptionDescriptionDescriptionDescription    See AlsoSee AlsoSee AlsoSee Also  Tether HoleTether HoleTether HoleTether Hole    Stylus can be tethered to this hole.  P. 1-17Stylus SlotStylus SlotStylus SlotStylus Slot    Stylus can be stored in this slot. Power ConnectorPower ConnectorPower ConnectorPower Connector    Connects the AC adapter.  P. 1-3USB USB USB USB 3.03.03.03.0    PortPortPortPort    Connects a USB device, such as a flash disk, printer, digital camera, joystick, and more. P. 4-4RJRJRJRJ----11111111    ConnectorConnectorConnectorConnector    Connects the telephone line.  P. 2-18RJRJRJRJ----45454545    ConnectorConnectorConnectorConnector    Connects the LAN cable.  P. 2-19ExpressCard Slot ExpressCard Slot ExpressCard Slot ExpressCard Slot (upper)    Accepts an ExpressCard for additional functions. P.  4-7PCPCPCPC    Card Card Card Card SlotSlotSlotSlot    (lower) Accepts a PC card for additional functions.  P. 4-9Depending on your model, the two slots could be a different combination (as below).
Getting Started   1-13Smart Card Smart Card Smart Card Smart Card Reader Reader Reader Reader (upper)    Accepts a smart card for additional security feature. P. 4-11RefRefRefRef    ComponentComponentComponentComponent    DescriptionDescriptionDescriptionDescription    See AlsoSee AlsoSee AlsoSee Also   ExpressCard Slot ExpressCard Slot ExpressCard Slot ExpressCard Slot (lower)    Accepts an ExpressCard for additional functions. P.  4-7SD Card ReaderSD Card ReaderSD Card ReaderSD Card Reader    Accepts a SD/SDHC/SDXC card for removable storage media. P. 4-12 TopTopTopTop----open Componentsopen Componentsopen Componentsopen Components     RefRefRefRef    ComComComComponentponentponentponent    DescriptionDescriptionDescriptionDescription    See AlsoSee AlsoSee AlsoSee Also  Camera LensCamera LensCamera LensCamera Lens    Allows you to use your computer’s camera function. The lens supports 2 MP (mega pixel). P. 6-22
 1-14   Getting Started RefRefRefRef    ComComComComponentponentponentponent    DescriptionDescriptionDescriptionDescription    See AlsoSee AlsoSee AlsoSee Also  It can be rotated. TouchscreenTouchscreenTouchscreenTouchscreen    Displays and receives information for the computer. P. 2-10Light SensorLight SensorLight SensorLight Sensor    Detects the surrounding lighting condition for automatic adjustment of the LCD brightness and optional keyboard backlight. Fingerprint Fingerprint Fingerprint Fingerprint Scanner Scanner Scanner Scanner (optional)    Uses fingerprint verification to protect your computer against unauthorized access. P. 2-27KeyboardKeyboardKeyboardKeyboard    Serves as the data input device.  P. 2-2TouchpadTouchpadTouchpadTouchpad    Serves as the pointing device.  P. 2-7IndicatorsIndicatorsIndicatorsIndicators    Show the current status of the computer’s devices.   PowerPowerPowerPower     Lights green when the computer is turned on. P. 1-7Lights yellow when the computer is in Sleep mode.   Battery Battery Battery Battery ChargeChargeChargeCharge Lights green when the battery is fully charged. P. 3-3Lights yellow when the battery is being charged.Blinks yellow when the battery’s capacity is below 10%. P. 3-6Blinks green and yellow by turns to indicate charging is suspended because the battery’s temperature is either too high or too low.   Hard Disk Hard Disk Hard Disk Hard Disk Drive InDrive InDrive InDrive In----UseUseUseUse Lights green when the computer is accessing the hard disk drive.
Getting Started   1-15RefRefRefRef    ComComComComponentponentponentponent    DescriptionDescriptionDescriptionDescription    See AlsoSee AlsoSee AlsoSee Also  Blinks red when the optional hard disk drive heater is on for low temperature operation. P. 8-9  RFRFRFRF Lights when the radio frequency is on.   Num LockNum LockNum LockNum Lock Lights when Num Lock is on.  P. 2-3  Caps LockCaps LockCaps LockCaps Lock Lights when Caps Lock is on.  P. 2-2 Bottom ComponentsBottom ComponentsBottom ComponentsBottom Components     RefRefRefRef    ComponentComponentComponentComponent    DescriptionDescriptionDescriptionDescription    See AlsoSee AlsoSee AlsoSee Also  Strap HolderStrap HolderStrap HolderStrap Holder    Four bottom hooks hold the handgrip strap.  P. 1-18Docking Docking Docking Docking ConnectorConnectorConnectorConnector    Inside is the docking connector for connecting an office dock or vehicle dock (purchased separately).
 1-16   Getting Started Memory SlotsMemory SlotsMemory SlotsMemory Slots    Inside are the memory slots for expanding the memory size of your computer. P. 4-13SIM Card Slot SIM Card Slot SIM Card Slot SIM Card Slot (optional)    Inside is the SIM card slot.  P. 2-23
Getting Started   1-17Using the AccessoriesUsing the AccessoriesUsing the AccessoriesUsing the Accessories    Using the TetherUsing the TetherUsing the TetherUsing the Tether    A tether is provided for attaching the stylus to your computer. 1. Insert one of the tether’s loop ends through the hole of the stylus (as indicated by  below). Then, insert the other end through the first loop (as indicated by  below) and pull it tight.  2. Insert the other loop end to the tether hole on the computer (as indicated by  below). Then, insert the stylus end through the loop (as indicated by  below) and pull it tight.
 1-18   Getting Started  Attaching the Handgrip StrapAttaching the Handgrip StrapAttaching the Handgrip StrapAttaching the Handgrip Strap    To use the handgrip strap, attach its four loops to the four bottom hooks on your computer. Make sure the loops are securely hooked.  When you need to operate and hold your computer at the same time, insert your hand through the strap for a firm grip. Attaching the Shoulder StrapAttaching the Shoulder StrapAttaching the Shoulder StrapAttaching the Shoulder Strap    To use the shoulder strap, secure the snap hooks to the two buckles on your computer. (Select models have four buckles for different positioning of the strap.)
Getting Started   1-19 CAUTION: The strap has been designed to carry only the weight of the computer. Therefore, be sure that the strap does not carry a weight that exceeds the weight of the computer. The strap may accidentally come loose from the computer. Do not use a strap that is damaged or about to tear.
Operating Your Computer   2-1Chapter 2Chapter 2Chapter 2Chapter 2     Operating Your ComputerOperating Your ComputerOperating Your ComputerOperating Your Computer    This chapter provides information about the use of the computer. If you are new to computers, reading this chapter will help you learn the operating basics. If you are already a computer user, you may choose to read only the parts containing information unique to your computer. CAUTION:Do not expose your skin to the computer when operating it in a very hot or cold environment. The computer can get uncomfortably warm when you use it in high temperatures. As a safety precaution in such a circumstance, do not place the computer on your lap or touch it with your bare hands for extended periods of time. Prolonged body contact can cause discomfort and potentially a burn.
2-2   Operating Your Computer  Using the Internal KeyboardUsing the Internal KeyboardUsing the Internal KeyboardUsing the Internal Keyboard    Your keyboard has all the standard functions of a full-sized computer keyboard plus an FnFnFnFn key added for specific functions. The standard functions of the keyboard can be further divided into four major categories: Typewriter keys Cursor-control keys Numeric keys Function keys Typewriter KeysTypewriter KeysTypewriter KeysTypewriter Keys    Typewriter keys are similar to the keys on a typewriter. Several keys are added such as the CtrlCtrlCtrlCtrl, AltAltAltAlt, EscEscEscEsc, and lock keys for special purposes. When the lock keys (Caps Lockaps Lockaps Lockaps Lock and Num LkNum LkNum LkNum Lk) are pressed, their corresponding indicators light up. The Control (CtrlCtrlCtrlCtrl) / Alternate (AltAltAltAlt) key is normally used in combination with other keys for program-specific functions. The Escape (EscEscEscEsc) key is usually used for stopping a process. Examples are exiting a program and canceling a command. The function depends on the program you are using. CursorCursorCursorCursor----Control KeysControl KeysControl KeysControl Keys    Cursor-control keys are generally used for moving and editing purposes. NOTE: The word “cursor” refers to the indicator on the screen that lets you know exactly where on your screen anything you type will appear. It can take the form of a vertical or horizontal line, a block, or one of many other shapes.
Operating Your Computer   2-3 Numeric KeypadNumeric KeypadNumeric KeypadNumeric Keypad    A 15-key numeric keypad is embedded in the typewriter keys as shown next:  Numeric keys facilitate entering of numbers and calculations. When Num Lock is on, the numeric keys are activated; meaning you can use these keys to enter numerals. NOTE: When the numeric keypad is activated and you need to type the English letter in the keypad area, you can turn Num Lock off or you can press FnFnFnFn and then the letter without turning Num Lock off. Some software may not be able to use the numeric keypad on the computer. If so, use the numeric keypad on an external keyboard instead.
2-4   Operating Your Computer  Function KeysFunction KeysFunction KeysFunction Keys    On the top row of the keys are the function keys: F1 to F12. Function keys are multi-purpose keys that perform functions defined by individual programs. Fn KeyFn KeyFn KeyFn Key    The Fn key, at the lower left corner of the keyboard, is used with another key to perform the alternative function of a key. The letter “Fn” and the alternative functions are identified by the color of blue on the keytop. To perform a desired function, first press and hold Fn, then press the other key. Hot KeysHot KeysHot KeysHot Keys    Hot keys refer to a combination of keys that can be pressed any time to activate special functions of the computer. Most hot keys operate in a cyclic way. Each time a hot key combination is pressed, it shifts the corresponding function to the other or next choice. You can easily identify the hot keys with the icons imprinted on the keytop. The hot keys are described next. KeyKeyKeyKey    DescriptionDescriptionDescriptionDescription    Switches the keyboard backlight on and off (optional). Switches the wireless radio on and off. Decreases the sound volume.
Operating Your Computer   2-5KeyKeyKeyKey    DescriptionDescriptionDescriptionDescription    Increases the sound volume.  Switches the display output when external devices are connected. Decreases the LCD brightness (20 levels).  Increases the LCD brightness (20 levels). Switches the touchscreen on and off (option). Switches the touchpad on and off. Switches the system sound output off (mute) and on.  Switches LCD backlight on and off.  Serves as the sleep button that you can define with Windows’ Power OptionsPower OptionsPower OptionsPower Options. (See the “Power Management” in Chapter 3.) Windows KeysWindows KeysWindows KeysWindows Keys    The keyboard has two keys that perform Windows-specific functions:   Windows Logo key and   Application key.
2-6   Operating Your Computer  The   Windows Logo key opens the StartStartStartStart menu and performs software-specific functions when used in combination with other keys. The   Application key usually has the same effect as a right mouse click. (See your Windows manual for more information.)
Operating Your Computer   2-7Using the TouchpadUsing the TouchpadUsing the TouchpadUsing the Touchpad    CAUTION: Do not use a sharp object such as a pen on the touchpad. Doing so may damage the touchpad surface.  NOTE: For optimal performance of the touchpad, keep your fingers and the pads clean and dry. When tapping on the pad, tap lightly. Do not use excessive force.  The touchpad is a pointing device that allows you to communicate with the computer by controlling the location of the pointer on the screen and making selection with the buttons.  The touchpad consists of a rectangular pad (work surface) and a left and right buttons. To use the touchpad, place your forefinger or thumb on the pad. The rectangular pad acts like a miniature duplicate of your display. As you slide your fingertip across the pad, the pointer (also called cursor) on the screen moves accordingly. When your finger reaches  the edge of the pad, simply relocate yourself by lifting the finger and placing it on the other side of the pad. Here are some common terms that you should know when using the touchpad:
2-8   Operating Your Computer  TermTermTermTerm    ActionActionActionAction    Point  Move your finger on the pad until the cursor points to the selection on the screen. Click  Press and release the left button. –or– Tap gently anywhere on the pad. Double-click  Press and release the left button twice in quick succession. –or– Tap twice on the pad rapidly. Drag and drop Press and hold the left button, then move your finger until you reach your destination (drag). Finally, release the button (drop) when you finish dragging your selection to the destination. The object will drop into the new location. –or– Gently tap twice on the pad and on the second tap, keep your finger in contact with the pad. Then, move your finger across the pad to drag the selected object to your destination. When you lift your finger from the pad, the selected object will drop into place. Scroll  To scroll is to move up and down or left and right in the working area on the screen. To move vertically, place your finger on the right or left edge of the pad and slide your finger up and down along the edge. To move horizontally, place your finger on the top or bottom edge of the pad and slide your finger left and right. This function works only after you install the touchpad driver supplied with the computer and it may not work for all applications.TABLE NOTE:TABLE NOTE:TABLE NOTE:TABLE NOTE: If you swap the left and right buttons, “tapping” on the touchpad as an alternative method of pressing the left button will no longer be valid.
Operating Your Computer   2-9Configuring the TouchpadConfiguring the TouchpadConfiguring the TouchpadConfiguring the Touchpad    You may want to configure the touchpad to suit your needs. For example, if you are a left-handed user, you can swap the two buttons so that you can use the right button as the left button and vice versa. You can also change the size of the on-screen pointer, the speed of the pointer, and so on. To configure the touchpad, go to Control PanelControl PanelControl PanelControl Panel  Mouse PropertiesMouse PropertiesMouse PropertiesMouse Properties.
2-10   Operating Your Computer  Navigating on the ScreenNavigating on the ScreenNavigating on the ScreenNavigating on the Screen    The screen of your computer is touch-sensitive. You can control the location of the cursor/pointer on the screen using your finger or the included stylus or digitizer pen to communicate with the computer. CAUTION: Do not use sharp objects on the LCD display. Doing so may damage the display surface. Use your finger or the included stylus or digitizer pen.  Using the TouchscreenUsing the TouchscreenUsing the TouchscreenUsing the Touchscreen    If your computer is equipped with the touchscreen feature, you can use your finger or the included stylus to navigate and select objects on the screen.  The following table shows how you use the touchscreen to obtain equivalent mouse functions. Term/ActionTerm/ActionTerm/ActionTerm/Action    Equivalent Mouse Equivalent Mouse Equivalent Mouse Equivalent Mouse FunctionFunctionFunctionFunction    Tap: Touch the screen once.  Click/Point Double-tap: Touch the screen twice rapidly.  Double-click
Operating Your Computer   2-11Term/ActionTerm/ActionTerm/ActionTerm/Action    Equivalent Mouse Equivalent Mouse Equivalent Mouse Equivalent Mouse FunctionFunctionFunctionFunction    Tap and hold: Tap and hold until a popup menu appears.  Right-click Drag: Hold the stylus (or finger) on the screen and drag across the screen until reaching your destination. Drag   Using MultiUsing MultiUsing MultiUsing Multi----touch Gesturestouch Gesturestouch Gesturestouch Gestures    If your computer model comes with multi-touch-capable screen and Windows 7, you can interact with your computer by placing two fingers on the screen. The movement of the fingers across the screen creates “gestures,” which send commands to the computer. Here are the multi-touch gestures that you can use: GesturesGesturesGesturesGestures    ActionsActionsActionsActions    (       = finger down;       = finger up)(       = finger down;       = finger up)(       = finger down;       = finger up)(       = finger down;       = finger up)    DescriptionsDescriptionsDescriptionsDescriptions    Pan (Scroll)      or  Drag 1 or 2 fingers up or down. Use panning to see another part of a page that has scroll bars.  Zoom (Pinch)  Move two fingers apart/toward each other. Use zooming to make an item (a photo for example) on the screen larger or smaller. The gesture works in applications that support mouse wheel zooming.
2-12   Operating Your Computer  GesturesGesturesGesturesGestures    ActionsActionsActionsActions    (       = finger down;       = finger up)(       = finger down;       = finger up)(       = finger down;       = finger up)(       = finger down;       = finger up)    DescriptionsDescriptionsDescriptionsDescriptions    Rotate or  Move two fingers in opposing directions.-or- Use one finger to pivot around another.Use rotating to move a picture or other item on the screen in a circular direction (clockwise or counter- clockwise). The gesture works in applications that support the specific gesture. Press and Tap  Press on target and tap using a second finger. Use press and tap to access the shortcut menu. Two- finger Tap Tap two fingers at the same time (where the target is in the midpoint between the fingers). The function is defined by applications that support the specific gesture.
Operating Your Computer   2-13GesturesGesturesGesturesGestures    ActionsActionsActionsActions    (       = finger down;       = finger up)(       = finger down;       = finger up)(       = finger down;       = finger up)(       = finger down;       = finger up)    DescriptionsDescriptionsDescriptionsDescriptions    Flicks Make quick drag gestures in the desired direction. Flick left or right to navigate back and forward in a browser and other applications. The gesture works in most applications that support back and forward.  Using the Dual Mode Display (Optional)Using the Dual Mode Display (Optional)Using the Dual Mode Display (Optional)Using the Dual Mode Display (Optional)    Dual mode display incorporates both touchscreen and digitizer functions. The display is set to Touchscreen mode by default. Touchscreen mode provides all the functionalities that an ordinary touchscreen has. When the computer receives signals from the digitizer pen, the display automatically switches to Digitizer mode.   Here are some common terms that you should know when using the digitizer feature:
2-14   Operating Your Computer  TermTermTermTerm         ActionActionActionAction    Move  Move the cursor pointed by the digitizer pen.Click/Point  Tap gently on the display. Double-click  Tap twice on the display rapidly. Drag and drop  Tap lightly on the display and move your digitizer pen until you reach your destination (drag). Finally, release your digitizer pen (drop) when you finish dragging your selection to the destination. The object will drop into the new location. Right-click  Press and hold down the digitizer pen button (A), then tap gently the object.  CAUTION: When the LCD display is used alone or with an external display simultaneously, the digitizer function cannot be used when the area of either display is set larger than the default setting of the display resolution. Even when only an external display is in use, the cursor will move on the external display if you touch the surface of the LCD display with the pen or bring the pen close to the surface of the LCD display when the digitizer driver is active. Therefore, do not touch the LCD display when only an external display is in use. The active digitizer feature cannot be used in the BIOS Setup program or when using the full screen in DOS mode.
Operating Your Computer   2-15 NOTE: You can move the cursor by bringing the digitizer pen close to the screen, without actually touching the screen’s surface. Do not move the digitizer pen too quickly. If the pen moves too quickly, the cursor may be unable to follow its movement. If you cannot click on the edge of the screen, hold the digitizer pen perpendicular to the display and try clicking again.  Using Landscape or Portrait ViewUsing Landscape or Portrait ViewUsing Landscape or Portrait ViewUsing Landscape or Portrait View    To rotate the display, press the button          located on the front of your computer to open the OSD Control Panel and click  . Each time this Rotate button is clicked, the screen display rotates counter-clockwise by 90O. For a Model without WWAN ModuleFor a Model without WWAN ModuleFor a Model without WWAN ModuleFor a Model without WWAN Module    Primary Primary Primary Primary LandscapeLandscapeLandscapeLandscape    Primary Primary Primary Primary PortraitPortraitPortraitPortrait    Secondary Secondary Secondary Secondary LandscapeLandscapeLandscapeLandscape    Secondary Secondary Secondary Secondary PortraitPortraitPortraitPortrait    Primary Primary Primary Primary LandscapeLandscapeLandscapeLandscape     For a Model with WWAN ModuleFor a Model with WWAN ModuleFor a Model with WWAN ModuleFor a Model with WWAN Module    Primary Primary Primary Primary LaLaLaLandscapendscapendscapendscape    Secondary Secondary Secondary Secondary LandscapeLandscapeLandscapeLandscape    Primary LandscapePrimary LandscapePrimary LandscapePrimary Landscape    Display DisplayDisplayDisplay DisplayDisplay DisplayDisplay
2-16   Operating Your Computer  NOTE: If the screen display resolution has been set to 800×600 pixels, you can rotate the display to Primary Landscape and Secondary Landscape only. While the display is rotated: –  Do not set the display resolution larger than the resolution of the LCD   display. –  If you exit Windows, the next time Windows is started up, the operation   of the touchpad will not match the display angle for a few seconds. –  The computer’s performance will decrease slightly. –  If a video is played, the picture may not be displayed properly or the    sound may be broken up. This problem can be corrected by rotating    the display to Primary Landscape. –  The touchpad’s scroll function does not work. The display cannot be rotated when DOS mode is set to “Full Screen.”
Operating Your Computer   2-17Using the Input PanelUsing the Input PanelUsing the Input PanelUsing the Input Panel    Use the Input Panel to enter text and perform various keyboard functions. There are two types of Input Panels for you to use in Windows 7: Touch KeyboardTouch KeyboardTouch KeyboardTouch Keyboard allows you to enter text by tapping the keys with your stylus, like pressing the keys on a standard keyboard.  Writing PadWriting PadWriting PadWriting Pad allows you to write on the writing pad, like writing on a piece of paper. Your handwriting will be converted into typed text.  To open the Input Panel, tap the Input Panel tab, which appears by default on the left edge of the screen. (You can also press the   button on the front of the computer to open or close the Input Panel.) To switch between the two types, tap  or    at the upper left corner of the Input Panel. NOTE: For more information on using the Input Panel, see Windows’ online help.
2-18   Operating Your Computer  Using the Network FeaturesUsing the Network FeaturesUsing the Network FeaturesUsing the Network Features    Using the ModemUsing the ModemUsing the ModemUsing the Modem    The internal 56 K fax/data modem allows you to use the telephone line to communicate with others by fax, email, or connect to an online service or bulletin board. To connect the telephone line to the modem, connect one end of the modem cable to the RJ-11 connector on the computer and the other end to the phone line.  NOTE: When using the communication software, you may have to disable power management. Do not enter the Sleep mode when using the communication software. Set parameters such as modem speed (baud rate) and line type (pulse dialing or tone dialing).
Operating Your Computer   2-19Using the LANUsing the LANUsing the LANUsing the LAN    The internal 10/100/1000Base-T LAN (Local Area Network) module allows you to connect your computer to a network. It supports data transfer rate up to 1000 Mbps. To connect the network cable to the LAN module, connect one end of the LAN cable to the RJ-45 connector on the computer and the other end to the network hub.  Using the Wireless LANUsing the Wireless LANUsing the Wireless LANUsing the Wireless LAN    The WLAN module of your computer supports IEEE 802.11a/g/n. Turning On/Off the WLAN Radio Turning On/Off the WLAN Radio Turning On/Off the WLAN Radio Turning On/Off the WLAN Radio     NOTE: The FAA (Federal Aviation Agency) has deemed it unsafe to operate wireless devices in aircraft as this may interfere with flight safety. Remember to turn off wireless LAN when using your computer in the airplane. FOR WIFI 5G BAND STATEMENT  The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.  To turn on or off the wireless radio (including the WLAN radio), press the button         located on the front of your computer or spress Fn+F1Fn+F1Fn+F1Fn+F1.  A small window pops up on the screen to indicate the status.
2-20   Operating Your Computer  Connecting to a Wireless NetworkConnecting to a Wireless NetworkConnecting to a Wireless NetworkConnecting to a Wireless Network    To connect to a wireless network: 1. Make sure that the WLAN function is enabled (as described above). The Wireless Network icon   on the taskbar should appear without a red X. 2. Tap the Wireless Network icon    on the taskbar. (An orange light in the icon  indicates connections are available.) 3. In the list of available wireless networks, tap a network, and then tap ConnectConnectConnectConnect.  4. Some networks require a network security key or passphrase. To connect to one of those networks, ask your network administrator or Internet service provider (ISP) for the security key or passphrase. For more information on setting a wireless network connection, refer to Windows online help. NOTE: You can use Intel® PROSet Wireless to take full advantage of the WiFi capabilities of your computer.  See the Help of the utility for instructions.
Operating Your Computer   2-21Using the BlueUsing the BlueUsing the BlueUsing the Bluetooth Featuretooth Featuretooth Featuretooth Feature    Your computer incorporates the Bluetooth 4.0 capability for short-range (about 50 meters) wireless communications between devices without requiring a cable connection. With Bluetooth, data can be transmitted through walls, pockets and briefcases as long as two devices are within range.  Turning Off/On the Bluetooth RadioTurning Off/On the Bluetooth RadioTurning Off/On the Bluetooth RadioTurning Off/On the Bluetooth Radio    To turn on or off the wireless radio (including the Bluetooth radio), press the button         located on the front of your computer or spress Fn+F1Fn+F1Fn+F1Fn+F1.  A small window pops up on the screen to indicate the status. When the Bluetooth radio is on, the Bluetooth icon   appears on the Windows taskbar. Connecting to another Bluetooth DeviceConnecting to another Bluetooth DeviceConnecting to another Bluetooth DeviceConnecting to another Bluetooth Device    1. Make sure that the Bluetooth function is enabled (as described above). 2. Make sure that the target Bluetooth device is turned on, discoverable and within close range. (See the documentation that came with the Bluetooth device.) 3. To search for Bluetooth devices, right click the Bluetooth icon   and select Add a Device.  4. Select the device you want to connect from the search results.
2-22   Operating Your Computer   5. Depending on the type of Bluetooth device that you want to connect to, you will need to enter the pertinent information. For detailed information on using the Bluetooth feature, see Windows’ online Help.
Operating Your Computer   2-23Using the WWAN Feature (OptionUsing the WWAN Feature (OptionUsing the WWAN Feature (OptionUsing the WWAN Feature (Optional)al)al)al)    A WWAN (Wireless Wide Area Network) uses mobile telecommunication cellular network technologies to transfer data. The WWAN module of your computer supports 3G or 4G LTE depending on your model. NOTE: Your computer only supports data transmission; voice transmission is not supported. Installing a SIM CardInstalling a SIM CardInstalling a SIM CardInstalling a SIM Card    To use the WWAN feature to connect to the Internet, you need to subscribe to the service and acquire a SIM card from a mobile phone network service provider. To install the SIM card, follow these steps: 1. Turn off the computer and disconnect the AC adapter. 2. Carefully place the computer upside down. 3. Remove the four screws to open the compartment cover.
Operating Your Computer   2-25To turn on or off the wireless radio (including the WWAN radio), press the button         located on the front of your computer. A small window pops up on the screen to indicate the status.  Connecting to WWAN NetworkConnecting to WWAN NetworkConnecting to WWAN NetworkConnecting to WWAN Network    1. Make sure that the SIM card is inserted and WWAN function is enabled (as described above). 2. On Windows desktop, double-click the AirCard WatcherAirCard WatcherAirCard WatcherAirCard Watcher shortcut. The screen as below appears.  3. If the radio is currently off, click Turn Radio OnTurn Radio OnTurn Radio OnTurn Radio On to turn on the radio. 4. Use AirCard Watcher to manage your broadband wireless network connections such as: Connect to the Internet Configure user options Send and receive SMS messages
2-26   Operating Your Computer  Manage profiles Use GPS to track your position (for models having the GPS module) NOTE: For detailed information on using AirCard Watcher, see the program’s online help.
Operating Your Computer   2-27Using the FingerpriUsing the FingerpriUsing the FingerpriUsing the Fingerprint Scanner nt Scanner nt Scanner nt Scanner (Optional)(Optional)(Optional)(Optional)  CAUTION:  We shall not be liable for any loss or damage whatsoever resulting from your use of the fingerprint scanner or neglect of fingerprint scanner use, or any data loss resulting from such developments as fingerprint authentication malfunctioning.It is not recommended that you use the fingerprint scanner in a below-freezing temperature. The moisture on your finger can freeze to the scanner’s metal surface when you touch it, resulting in a failed operation.  The fingerprint scanner provides a strong authentication mechanism based on fingerprint recognition. It features: Website Log On Logon to your web accounts like banks, webmail, and more with a simple swipe of your finger.  Windows Log On Logon to Microsoft® Windows® with a simple swipe of your finger every time you turn on your computer or log onto your desktop.  QuickLaunch Quickly launch all your favorite websites, open files and folders, and log in to your accounts with a simple swipe of your finger.  KeepSafe  Protect your pictures, personal files, and folders using your fingerprint so only you can access them. NOTE: You can register a fingerprint only after creating a password for the Windows user account.
2-28   Operating Your Computer  To register your fingerprint, click StartStartStartStart  All ProgramsProgramsProgramsPrograms  AuthenTeAuthenTeAuthenTeAuthenTec TrueSuitec TrueSuitec TrueSuitec TrueSuite     AuthenTec TrueSuiteAuthenTec TrueSuiteAuthenTec TrueSuiteAuthenTec TrueSuite. Click the finger you want to register and follow the onscreen instructions to complete.  You can then use the Fingerprint Software to set up how the fingerprint authentication works.    App StoreSettings OptionsHelp
Operating Your Computer   2-29For detailed information, click    the Help button of the software.
Managing Power   3-1Chapter 3Chapter 3Chapter 3Chapter 3     Managing PowerManaging PowerManaging PowerManaging Power    Your computer operates either on external AC power or on internal battery power. This chapter tells you how you can effectively manage power. To maintain optimal battery performance, it is important that you use the battery in the proper way.
3-2   Managing Power AC AdapterAC AdapterAC AdapterAC Adapter    CAUTION:The AC adapter is designed for use with your computer only. Connecting the AC adapter to another device can damage the adapter. The AC power cord supplied with your computer is for use in the country where you purchased your computer. If you plan to go overseas with the computer, consult your dealer for the appropriate power cord.When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the computer. A reverse procedure may damage the AC adapter or computer. When unplugging the connector, always hold the plug head. Never pull on the cord.  The AC adapter serves as a converter from AC (Alternating Current) to DC (Direct Current) power because your computer runs on DC power, but an electrical outlet usually provides AC power. It also charges the battery pack when connected to AC power. The adapter operates on any voltage in the range of 100~240 V AC.
Managing Power   3-3Battery PackBattery PackBattery PackBattery Pack    The battery pack is the internal power source for the computer. It is rechargeable using the AC adapter. The operating time of a fully charged battery pack depends on how you are using the computer. When your applications often access peripherals, you will experience a shorter operating time. NOTE: Care and maintenance information for the battery is provided in the “Battery Pack” section in Chapter 7.  ChargingChargingChargingCharging    the Battery Packthe Battery Packthe Battery Packthe Battery Pack    NOTE: Charging will not start if the battery’s temperature is below 0 °C (32 °F) or above 40 °C (104 °F); the charging process will stop if the battery’s temperature gets above 60 °C (140 °F). To avoid damaging the battery under this situation, disconnect the AC adapter and wait for the battery to return to room temperature before charging again. During charging, do not disconnect the AC adapter before the battery has been fully charged; otherwise you will get a prematurely charged battery.  To charge the battery pack, connect the AC adapter to the computer and an electrical outlet. The Battery Charge Indicator (   ) on the computer glows yellow to indicate that charging is in progress. You are advised to keep the computer power off while the battery is being charged. When the battery is fully charged, the Battery Charge Indicator lights green. It takes approximately 3 hours to fully charge the Li-Ion battery pack when the computer is off, and approximately 6 hours to fully charge the Li-Ion battery pack when the computer is on.
3-4   Managing Power CAUTION: After the computer has been fully recharged, do not immediately disconnect and reconnect the AC adapter to charge it again. Doing so may damage the battery.  NOTE: The battery level may automatically lessen due to the self-discharge process (0.21 % per day), even when the battery pack is fully charged (100 %). This happens no matter if the battery pack is installed in the computer.  Initializing the Battery PackInitializing the Battery PackInitializing the Battery PackInitializing the Battery Pack    You need to initialize a new battery pack before using it for the first time or when the actual operating time of a battery pack is much less than expected. Initializing is the process of fully charging, discharging, and then charging. It can take several hours. A tool called “Gauge Reset” is provided for the purpose. See “Gauge Reset” in Chapter 6 for information on using the tool. Checking the Battery Level  Checking the Battery Level  Checking the Battery Level  Checking the Battery Level      NOTE: Any battery level indication is an estimated result. The actual operating time can be different from the estimated time, depending on how you are using the computer.  By Operating SystemBy Operating SystemBy Operating SystemBy Operating System    You can check the approximate battery level using the battery meter function of the operating system. To read the battery level in Windows, click the battery icon on the taskbar.  By Gas GaugeBy Gas GaugeBy Gas GaugeBy Gas Gauge    On the exterior side of the battery pack is a gas gauge for displaying the estimated battery charge. When the battery pack is not installed in the computer and you want
Managing Power   3-5to know the battery charge, you can press the switch with a pointed device to see the corresponding value of indicator segment that light green.   The value of the corresponding green segment indicates the relative percentage of the battery charge. The battery pack is fully discharged when you see no segment glowing green. Replacing the Battery PackReplacing the Battery PackReplacing the Battery PackReplacing the Battery Pack    CAUTION: There is danger of explosion if the battery is incorrectly replaced. Replace the battery only with the computer manufacturer’s optional battery packs. Discard used batteries according to the dealer’s instructions. Do not attempt to disassemble the battery pack.  If you often rely on battery power for a long period of time while traveling, you may consider the purchase of an additional battery pack from your dealer and keep it with you in a fully charged state as a backup. To replace the battery pack, follow these steps: 1. Make sure that the computer is not turned on or connected to AC power. 2. Locate the battery compartment on the right side of the computer. 3. Slide the door lock toward the left to unlock (). Then slide the door latch downward to open the door (). Switch
3-6   Managing Power  4. Pull the ribbon strip to remove the battery pack.  5. With the ribbon strip facing outward, slide the new battery pack all the way into the slot. 6. Close the door. Make sure the door latch clicks into place. Then, slide the door lock toward the right. Battery Low Battery Low Battery Low Battery Low SignaSignaSignaSignals and Actionls and Actionls and Actionls and Actionssss    The battery icon   changes appearance to display the current state of the battery. Battery Battery Battery Battery IconIconIconIcon    Battery LevelBattery LevelBattery LevelBattery Level    DescriptionDescriptionDescriptionDescription     Discharging  The icon shows the charge remaining in 10-percent increments until the charge reaches the low-battery level.  Low  The battery charge has reached the low-battery level (10% by default).  Critically low  The battery charge has reached the critical battery level (5% by default).  By default, Windows will display a notification and put your computer into Hibernation.
Managing Power   3-7When the battery is low, the computer’s Battery Charge Indicator (   ) also blinks red to alert you to take actions. Always respond to low-battery by connecting the AC adapter, placing your computer in Hibernation mode, or turning off the computer.
3-8   Managing Power Power ManagementPower ManagementPower ManagementPower Management    Your computer supports ACPI (Advanced Configuration and Power Interface) for power management. The power management feature allows you to reduce the power consumption for energy saving. With an ACPI-compliant operating system such as Windows, power supply to different computer components is controlled on an as-needed basis. This allows maximum power conservation and performance at the same time. In general, Windows’ power management works in this way: What...What...What...What...    When...When...When...When...    Power to the hard disk is turned off When the hard disk has been idle for a set period. Power to the display is turned off  When the display has been idle for a set period. The computer enters the Sleep mode. The hard disk and display are turned off and the entire system consumes less power. When the entire system has been idle for a set period. When you manually activate the mode. The computer enters the Hibernationmode. (See the next subsection for more information.) When the entire system has been idle for a set period. When you manually activate the mode.  For detailed information on power management, see Windows’ Help.
Managing Power   3-9HibernationHibernationHibernationHibernation    Hibernation is a very useful feature. People frequently open many applications when they use computers. It takes some time to get all these applications open and running, and normally they all have to be closed before the computer can be turned off. When you use the hibernation feature, you do not have to close the applications. The computer stores the state of your computer to a file on the hard disk and then shuts down. The next time you turn on your computer, you return to exactly where you left off.
3-10   Managing Power PowerPowerPowerPower----Saving TipsSaving TipsSaving TipsSaving Tips    Aside from enabling your computer’s power saving mode (see previous section), you can do your part to maximize the battery’s operating time by following these suggestions. Enter power saving mode when using battery power. Do not disable automatic power management features. Decrease the LCD brightness to the lowest comfortable level. Shorten the length of time before Windows turn off the display. Many USB devices use power just by being connected. If you use a USB mouse, you can save power by disconnecting the mouse and using the touchpad. If you use a USB flash drive, unplug it when you are not using it. Remove the card (such as PC card, ExpressCard, and Smart Card) if not using it. Turn off the wireless radio if you are not using the wireless module (such as WLAN, Bluetooth, or WWAN). Turn off the computer when you are not using it.
Expanding Your Computer   4-1Chapter 4Chapter 4Chapter 4Chapter 4     Expanding Your Expanding Your Expanding Your Expanding Your ComputerComputerComputerComputer    You can expand the capabilities of your computer by connecting other peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter.
4-2   Expanding Your ComputerConnecting an External MonitorConnecting an External MonitorConnecting an External MonitorConnecting an External Monitor    If you want the benefits of a larger display screen with higher resolution, you can connect an external display monitor to your computer. Follow this procedure to connect an external monitor: 1. Make sure that the computer is not turned on. 2. Plug the monitor’s D-type signal connector to the computer’s VGA connector.  3. Plug one end of the monitor’s power cord into the power socket on the monitor and the other end to an electrical outlet. 4. To use the monitor, turn on the monitor before turning on the computer. 5. The monitor should respond by default. If not, you can switch the display to the monitor or to both (simultaneous display), or to multi-display by pressing the FnFnFnFn+F5F5F5F5 hot key. In Windows, you can also change the display through the settings in DisplayDisplayDisplayDisplay Properties. 6. You can change display settings through your operating system. See your operating system documentation or online help for specific information. CAUTION: Do not disconnect the external monitor while the computer is in the Sleep mode or Hibernation mode. If no external monitor is connected when the computer resumes, the LCD might not display properly.
Expanding Your Computer   4-3Connecting a Serial DeviceConnecting a Serial DeviceConnecting a Serial DeviceConnecting a Serial Device    Your computer has one or two serial port (depending on model) for connecting a serial device such as a serial mouse or serial communication device (modem). Follow this procedure to connect a serial device: 1. Make sure the computer is not turned on 2. Plug the device cable to the serial port on the rear of the computer.  3. Turn on the computer. NOTE: Portable modems that derive power through the serial port cannot be used with the computer. Instead, use a modem that is powered by its own internal battery or external AC power.
4-4   Expanding Your ComputerConnecting a USB DeviceConnecting a USB DeviceConnecting a USB DeviceConnecting a USB Device    Your computer has three USB ports (two USB 3.0 ports at the left side and one USB 2.0 port at the back) for connecting USB devices, such as a digital camera, scanner, printer, modem, and mouse. USB 3.0 supports a transfer rate up to 5 Gbit/s and USB 2.0 a transfer rate up to 12 MB/s. To connect a USB device, plug the device cable to a matching USB port.
Expanding Your Computer   4-5Connecting an IEEE 1394 DeviceConnecting an IEEE 1394 DeviceConnecting an IEEE 1394 DeviceConnecting an IEEE 1394 Device    Your computer has a mini IEEE 1394a port for connecting IEEE 1394 devices that include not only computer peripheral devices such as scanner, printer and high-quality CCD, but also consumer electronic equipment such as DVCAM and VCR. To connect an IEEE 1394 device, prepare an IEEE 1394 cable. Plug the appropriate end of the cable to the computer’s mini IEEE 1394 connector and the other end to the device’s corresponding connector.
4-6   Expanding Your ComputerConnecting Audio DevicesConnecting Audio DevicesConnecting Audio DevicesConnecting Audio Devices    For higher audio quality, you can send or receive sound through external audio devices.  Audio Output Connector Audio Output Connector Audio Output Connector Audio Output Connector (   )        can be connected to speakers, headphones, or earphone set. Microphone Connector Microphone Connector Microphone Connector Microphone Connector (   )     can be connected to an external microphone for recording voice or sound. NOTE: After connecting an external audio device, make sure that you specify the use of the correct audio device in Windows. When using the external speakers/headphones or microphone, you cannot use the internal one.
Expanding Your Computer   4-7Using ExpressCardsUsing ExpressCardsUsing ExpressCardsUsing ExpressCards    Your computer has an ExpressCard slot. The ExpressCard slot can accommodate a 54 mm (ExpressCard/54) or 34 mm (ExpressCard/34) wide ExpressCard. Typical ExpressCards support a very extensive range of applications including memory, wired and wireless communication cards, and security devices. Shown next are the appearances of ExpressCards for your reference.                                   ExpressCard/54              ExpressCard/34 To insert an ExpressCard: 1. Locate the ExpressCard slot on the left side of the computer. It can be the upper slot (standard configuration) or lower slot depending on your model. 2. Slide the ExpressCard, with its label facing up, all the way into the slot until the rear connectors click into place.  Eject button
4-8   Expanding Your Computer3. When a new card is seated, the computer will detect it and try to install the appropriate driver. Follow the on-screen instructions to complete the process. To remove an ExpressCard: 1. Double-click on the Safely Remove Hardware Safely Remove Hardware Safely Remove Hardware Safely Remove Hardware icon (   ) found on the Windows taskbar and the Safely Remove HardwareSafely Remove HardwareSafely Remove HardwareSafely Remove Hardware window appears on screen. 2. Select (highlight) the ExpressCard from the list to disable the card. 3. Push the eject button and the card will slide out slightly. 4. Pull the card out of the slot.
Expanding Your Computer   4-9Using PC CardsUsing PC CardsUsing PC CardsUsing PC Cards    NOTE: Some PC cards require additional system resources. Before using such PC card, you may have to free other system resources for the PC card. Although some PC cards can be inserted and removed without turning off the computer, you cannot remove or install PC cards during Sleep mode.  Your computer (standard configuration) has one PC card slot that support CardBus specifications. The slots can accommodate a type II card. Typical type II cards are flash memory, SRAM, modem, LAN, and SCSI cards. To insert a PC card: 1. Locate the PC card slot (the lower slot) on the left side of the computer. 2. Slide the PC card, with its label facing up, into the slot until the eject button pops out.  3. When a new card is seated, the computer will detect it and try to install the appropriate driver. Follow the on-screen instructions to complete the process. To remove a PC card: 1. Double-click the Safely Remove Hardware Safely Remove Hardware Safely Remove Hardware Safely Remove Hardware    icon found on the Windows taskbar and the Safely Remove HardwareSafely Remove HardwareSafely Remove HardwareSafely Remove Hardware window appears on screen. 2. Select (highlight) the PC card from the list to disable the card. Eject button
4-10   Expanding Your Computer3. Push the eject button and the card will slide out slightly. 4. Pull the card out of the slot.
Expanding Your Computer   4-11Using Smart Cards (Optional)Using Smart Cards (Optional)Using Smart Cards (Optional)Using Smart Cards (Optional)    Your computer may have a smart card reader. With an embedded microcontroller, smart cards have the unique ability to store large amounts of data, carry out their own on-card functions (e.g., encryption and mutual authentication), and interact intelligently with a smart card reader. To insert a smart card: 1. Locate the smart card slot. 2. Slide the smart card, with its label and embedded computer chip facing up into the slot.  3. When a new card is seated, use the third-party smart card software to allow your computer to read it. To remove a smart card: 1. Make sure that the third-party smart card software is not accessing the smart card. 2. Pull the card out of the slot.
4-12   Expanding Your ComputerUsing Storage CardsUsing Storage CardsUsing Storage CardsUsing Storage Cards    NOTE: You can use only storage cards. Your SD card reader does not support cards with I/O (input/output) functions such as a wireless network card or Bluetooth card. Your computer has an SD card reader. The card reader is a small drive for reading from and writing to removable storage cards (or called memory cards). The card reader supports SD  (Secure Digital), SDHC (Secure Digital High Capacity), and SDXC (Secure Digital eXtended Capacity) cards. To insert a storage card: 1. Locate the SD card reader on the left side of the computer. 2. Align the card with its connector pointing to the slot and its label facing up. Slide the card into the slot until it reaches the end.  3. Windows will detect the card and assign it a drive name. To remove a storage card: 1. Double-click My ComputerMy ComputerMy ComputerMy Computer. 2. Right-click the drive with the card and select EjectEjectEjectEject. 3. Push the card to release and then pull the card out of the slot.
Expanding Your Computer   4-13System Memory UpgradeSystem Memory UpgradeSystem Memory UpgradeSystem Memory Upgrade    You can upgrade your computer by expanding system memory. CAUTION:It is not recommended that you buy and install RAM modules by yourself. If you want to expand system memory, please ask Getac service center to install DRAM modules for you so that full compatibility can be guaranteed. RAM modules are extremely sensitive to static electricity. There are cases where static electricity generated by the human body has adversely affected such modules. When inserting or removing a RAM module, do not touch the terminals or internal components, insert objects other than the module, or allow foreign particles to enter. Doing so has been known to cause damage, fire, or electrical shock.  To install the RAM module: 1. Remove the battery pack (see chapter 3) and make sure that the computer is not connected to AC power. 2. Carefully place the computer upside down. 3. Remove the four screws to open the compartment cover.
4-14   Expanding Your Computer 4. To install the RAM module, match the module's notched part with the socket's projected part and firmly insert the module into the socket at a 20-degree angle. Then push down until the retaining clips lock the module into position.   CAUTION: If the RAM module is difficult to insert or difficult to push down, do not force it. Check once more to ensure that the module is positioned correctly.  5. Close the compartment cover and secure with four screws.
Using BIOS Setup and System Recovery   5-1Chapter 5Chapter 5Chapter 5Chapter 5     Using BIOS Setup and Using BIOS Setup and Using BIOS Setup and Using BIOS Setup and System RecoverySystem RecoverySystem RecoverySystem Recovery    BIOS Setup Utility is a program for configuring the BIOS (Basic Input/ Output System) settings of the computer. BIOS is a layer of software, called firmware, that translates instructions from other layers of software into instructions that the computer hardware can understand. The BIOS settings are needed by your computer to identify the types of installed devices and establish special features. System Recovery reinstalls Windows to your computer and restores it to the factory default status. This chapter tells you how to use the BIOS Setup and System Recovery.
5-2   Using BIOS Setup and System Recovery BIOS SetupBIOS SetupBIOS SetupBIOS Setup    When and How to UsWhen and How to UsWhen and How to UsWhen and How to Useeee    You need to run BIOS Setup Utility when: You see an error message on the screen requesting you to run BIOS Setup Utility. You want to restore the factory default BIOS settings. You want to modify some specific settings according to the hardware. You want to modify some specific settings to optimize the system performance. To run BIOS Setup Utility, press the F2F2F2F2 key when the prompt appears on the screen during the system startup. The prompt shows up on the screen for only a few seconds. You must press the F2F2F2F2 key quickly. The BIOS Setup Utility main screen appears as shown next. Information  Main Advanced Security Boot ExitModel  NO: Serial NO: Asset Tag: Processor Info: Installed System Memory: SATA HDD: BIOS Revision: EC Revision: LAN MAC Address: IEEE 1394 GUID: Operating Time: V200-G2 RC6XXV0026 Intel(R) Core(TM) i5-3320M CPU @2.60GHz 4096 MB TOSHIBA MQ01ABD032 – 320.0 GB R1.50.070520G R0.50P.070520 00-22-20-0D-98-C0 00-40-D0-01-00-49-00-D6 184 Hours F1  Help  ĖĘĖĘĖĘĖĘ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ĕėĕėĕėĕė Select Menu  Enter Select  Sub-Menu  F10 Save and Exit
Using BIOS Setup and System Recovery   5-3In general, you can use the arrow keys to move around and + / – keys to change the setup values. Keyboard information can be found at the bottom of the screen. NOTE: The BIOS Setup Utility screens shown in this chapter are for your reference only. The actual items or settings on your computer may differ. The BIOS Setup Utility program may have been updated after the publication of this manual. The settings you select in your operating system might override similar settings in BIOS Setup Utility.  Information MenuInformation MenuInformation MenuInformation Menu    The Information menu contains the basic configuration information of the system. There are no user-definable items in this menu. Information  Main Advanced Security Boot ExitModel  NO: Serial NO: Asset Tag: Processor Info: Installed System Memory: SATA HDD: BIOS Revision: EC Revision: LAN MAC Address: IEEE 1394 GUID: Operating Time: V100-G4 RC5XXV0043 Intel(R) Core(TM) i5-3320M CPU @2.60GHz 8192 MB LITEONIT LAT-128M3S – 128 GB R1.01.070520U R0.50M.070520 00-22-20-0D-A8-A7 00-40-D0-01-00-49-00-2D 80 Hours F1  Help  ɥɧɥɧɥɧɥɧ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ɤɦɤɦɤɦɤɦ Select Menu  Enter Select  Sub-Menu  F10 Save and Exit  NOTE: The “Asset Tag” information appears when you have entered the asset number for this computer using the asset management program. The program is provided in the Asset tag folder of the Driver disc.
5-4   Using BIOS Setup and System Recovery Main MenuMain MenuMain MenuMain Menu    The Main menu contains various system settings. Information Main Advanced Security Boot ExitSystem Date: System Time: Legacy USB Support:[05/28/2012][11:33:08]  [Enabled] Item Specific HelpView or set system  date. F1  Help  ĖĘĖĘĖĘĖĘ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ĕėĕėĕėĕė Select Menu  Enter Select  Sub-Menu  F10 Save and Exit  System TimeSystem TimeSystem TimeSystem Time  sets the system time. System DateSystem DateSystem DateSystem Date  sets the system date. Legacy USB SupportLegacy USB SupportLegacy USB SupportLegacy USB Support  enables or disables the system’s support for Legacy USB device in DOS mode.       05
Using BIOS Setup and System Recovery   5-5Advanced MenuAdvanced MenuAdvanced MenuAdvanced Menu    The Advanced menu contains the advanced settings as shown next. Information Main  Advanced Security Boot Exit Intel (R) Rapid Start TechnologyWake Up Capability System Policy AC Initiation: SATA Mode: AMT Configuration Virtualization Technology Setup Graphic Setup Device Configuration Serial COM Port Configuration [Performance][Disabled] [AHCI]Item Specific HelpiRST – Intel (R) Rapid Start Technology Configuration F1  Help  ĖĘĖĘĖĘĖĘ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ĕėĕėĕėĕė Select Menu  Enter Select  Sub-Menu  F10 Save and Exit  Intel (R) Rapid Start Technology Intel (R) Rapid Start Technology Intel (R) Rapid Start Technology Intel (R) Rapid Start Technology  configures iRST. Press Enter Enter Enter Enter to access the submenu as shown below. AdvancedIntel (R) Rapid Start Technology Item Specific HelpiRST Support: [Disabled ]  Enable iRST. F1  Help  ĖĘĖĘĖĘĖĘ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ĕėĕėĕėĕė Select Menu  Enter Select  Sub-Menu  F10 Save and Exit Disabled
5-6   Using BIOS Setup and System Recovery iRST Support  enables of disables iRST, which gets your system up and running faster. Wake Up CapabilityWake Up CapabilityWake Up CapabilityWake Up Capability  specifies events for waking up the system. Press Enter Enter Enter Enter to access the submenu as shown below. AdvancedWake Up Capability Item Specific HelpRing Wake Up From S3:USB Wake Up From S3: Wake on PCH LAN: [Disabled] [Disabled] [Disabled] Allow a modem  activity to wake up  the system from S3(Sleep) state. F1  Help  ĖĘĖĘĖĘĖĘ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ĕėĕėĕėĕė Select Menu  Enter Select  Sub-Menu  F10 Save and Exit  Ring Wake Up From S3  allows a modem device activity to wake up the system from S3 (Sleep) state. USB Wake Up From S3  allows a USB device activity to wake up the system from S3 (Sleep) state. Wake on PCH LAN  allows a LAN activity to wake up the system from S3 (Sleep) state. System Policy System Policy System Policy System Policy sets if the system always runs at full speed (Performance) or lowers down when its temperature is too high (Balance). AC Initiation AC Initiation AC Initiation AC Initiation sets if connecting AC power will automatically start or resume your computer. SATA ModeSATA ModeSATA ModeSATA Mode  set to AHCI if your hard disk supports AHCI. AHCI allows you to take advantage of Advanced Host Controller Interface features. The options are IDE and AHCI. CAUTION: Incorrect SATA mode settings can result in hard disk drive boot failure. Disabled
Using BIOS Setup and System Recovery   5-7 AMT ConfigurationAMT ConfigurationAMT ConfigurationAMT Configuration  configures Active Management Technology parameters. Press Enter Enter Enter Enter to access the submenu as shown below. AdvancedAMT Configuration Item Specific HelpIntel AMT:Intel AMT Setup Prompt: [Disable ] [Disabled] Enable/Disable  Intel (R) Active Management Technology BIOS Extension. Note: iAMT H/W is always enabled. This option just controls the BIOS extension execution. If enabled this  requires additional firmware in the SPI device F1  Help  ĖĘĖĘĖĘĖĘ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ĕėĕėĕėĕė Select Menu  Enter Select  Sub-Menu  F10 Save and Exit  Intel AMT  enables or disables Intel® Active Management Technology BIOS extension execution. AMT allows the system administrator to access an AMT featured computer remotely. Intel AMT Setup PromptIntel AMT Setup PromptIntel AMT Setup PromptIntel AMT Setup Prompt  determines whether the prompt for entering Intel AMT Setup appears or not during POST. If disabled, users cannot enter Intel AMT Setup.        Virtualization Technology SetupVirtualization Technology SetupVirtualization Technology SetupVirtualization Technology Setup sets Virtualization Technology parameters. Press Enter Enter Enter Enter to access the submenu as shown below. Enabled
5-8   Using BIOS Setup and System Recovery AdvancedVirtualization Technology Setup Item Specific HelpIntel(R) Virtualization Technology Intel(R) VT for Directed I/O (VT-d)[Disabled][Disabled]When enabled, a VMM  can utilize the  additional hardware capabilities. F1  Help  ĖĘĖĘĖĘĖĘ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ĕėĕėĕėĕė Select Menu  Enter Select  Sub-Menu  F10 Save and Exit  Intel(R) Virtualization TechnologyIntel(R) Virtualization TechnologyIntel(R) Virtualization TechnologyIntel(R) Virtualization Technology  enables or disables Intel® VT (Intel Virtualization Technology) feature which provides hardware support for processor virtualization. When enabled, a VMM (Virtual Machine Monitor) can utilize the additional hardware virtualization capabilities provided by this technology. Intel(R) VT for Directed I/O (VTIntel(R) VT for Directed I/O (VTIntel(R) VT for Directed I/O (VTIntel(R) VT for Directed I/O (VT----d)d)d)d)  enables or disables VT-d (Intel® Virtualization Technology for Directed I/O). When enabled, VT-d helps enhance Intel platforms for efficient virtualization of I/O devices.       Graphics SetupGraphics SetupGraphics SetupGraphics Setup  sets graphics related options. Press Enter Enter Enter Enter to access the submenu as shown below. Disabled
Using BIOS Setup and System Recovery   5-9AdvancedGraphic Setup Item Specific HelpDVMT  Pre-Allocated:Total Graphics Memory:[    ] [256MB] Select Pre-Allocated Graphics Memory size used by the Internal Graphics Device. This has no effect if external graphics are present. F1  Help  ĖĘĖĘĖĘĖĘ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ĕėĕėĕėĕė Select Menu  Enter Select  Sub-Menu  F10 Save and Exit  NOTE: Graphic Setup parameters apply to the internal graphics device only.  DVMT  PreDVMT  PreDVMT  PreDVMT  Pre----Allocated Allocated Allocated Allocated  sets the amount of pre-allocated (fixed) graphics memory for use by the internal graphics device.  Total Graphics Memory Total Graphics Memory Total Graphics Memory Total Graphics Memory  sets the amount of total graphics memory (pre-allocated + fixed + DVMT) for use by the internal graphics device.         64MB
5-10   Using BIOS Setup and System Recovery Device Configuration enables or disables several hardware components. Press Enter to access the submenu as shown below. AdvancedDevice Configuration Item Specific HelpWireless LAN:WWAN: Bluetooth:  Media Card Reader:  Smart Card Reader:  HD Audio:  Modem: Fingerprint Scanner:  1394 Port:  Touch Screen:  GPS: [       ] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] Set WLAN device to enable/disable. F1  Help  ĖĘĖĘĖĘĖĘ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ĕėĕėĕėĕė Select Menu  Enter Select  Sub-Menu  F10 Save and Exit  You can enable or disable the following items: Wireless LAN WWAN Bluetooth Media Card Reader (SD) Smart Card Reader HD Audio (High Definition Audio) Modem Fingerprint Scanner 1394 Port Touch Screen GPS Enabled
Using BIOS Setup and System Recovery   5-11Serial COM Port Configuration  enables or disables the serial port. Press Enter to access the submenu as shown below. AdvancedCOM PORT Configuration Item Specific HelpSerial COM PORT1Serial COM PORT2Serial COM PORT3   [       ] [Enabled] [Enabled] This option controls the Onboard COM1 Address. When  enabled, COM1 uses address 0x3F8h and  IRQ4. F1  Help  ĖĘĖĘĖĘĖĘ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ĕėĕėĕėĕė Select Menu  Enter Select  Sub-Menu  F10 Save and Exit             Enabled
5-12   Using BIOS Setup and System Recovery Security MenuSecurity MenuSecurity MenuSecurity Menu    The Security menu contains the security settings, which safeguard your system against unauthorized use. Information Main Advanced Security Boot ExitSupervisor Password Is: User Password Is: Set Supervisor Password:Set User Password Password on Boot: Set HDD 0 Password: HDD 0 Password: TPM Setup Menu Intel Trusted Execution TechnologyCleared Cleared [Enter] [Enter] [Disabled][Enter] Cleared [Disabled]Item Specific HelpSet or clear the Supervisor account’s password. F1  Help  ĖĘĖĘĖĘĖĘ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ĕėĕėĕėĕė Select Menu  Enter Select  Sub-Menu  F10 Save and Exit  NOTE: You can set the user password only when the supervisor password has been set. If both the administrator and user passwords are set, you can enter any of them for starting up the system and/or entering BIOS Setup. However, the user password only allows you to view/change the settings of certain items. A password setting is applied right after it is confirmed. To cancel a password, leave the password empty by pressing the Enter key.  Supervisor/User Password Is  Supervisor/User Password Is  Supervisor/User Password Is  Supervisor/User Password Is  shows whether you have set the supervisor/user password or not for the system. Set Supervisor/User PasswordSet Supervisor/User PasswordSet Supervisor/User PasswordSet Supervisor/User Password  sets the supervisor/user password. When typing the password, first make sure that Num Lock is off, and then type the password in the entry fields and press EnterEnterEnterEnter. Confirm your password by typing it again and pressing Enter
Using BIOS Setup and System Recovery   5-13EnterEnterEnterEnter. You can set the supervisor/user password to be required for starting up the system and/or entering BIOS Setup. Password on BootPassword on BootPassword on BootPassword on Boot  allows you to enable or disable the entering of password for booting up your system. Once the password is successfully set and this item is enabled, it is required for booting up the system. Set HDD Set HDD Set HDD Set HDD 0 Password0 Password0 Password0 Password  sets the password for locking the Primary Master hard disk drive.  After setting a password, the hard disk drive can only be unlocked by the password no matter where it is installed. HDD 0 Password Is  HDD 0 Password Is  HDD 0 Password Is  HDD 0 Password Is  shows whether you have set the hard disk password or not. TPM Setup MenuTPM Setup MenuTPM Setup MenuTPM Setup Menu  sets various TPM parameters. Press Enter Enter Enter Enter to access the submenu as shown below.   TTTTPM Support PM Support PM Support PM Support  enables or disables TPM (Trusted Platform Module) support. TPM (Trusted Platform Module) is a component on your computer’s mainboard that is specifically designed to enhance platform security by providing a protected space for key operations and other security critical tasks. SecurityTPM Setup Menu  Item Specific HelpTPM Support: Current TPM State: Change TPM Status: [       ] [Enabled and Activated] [No Change]This is used to decide whether TPM support should be enabled or disabled. F1  Help  ĖĘĖĘĖĘĖĘ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ĕėĕėĕėĕė Select Menu  Enter Select  Sub-Menu  F10 Save and Exit Enabled
5-14   Using BIOS Setup and System Recovery Current TPM StateCurrent TPM StateCurrent TPM StateCurrent TPM State  shows the current TPM state. Change TPM State Change TPM State Change TPM State Change TPM State  allows you to select between No Change, Clear, Deactivate & Disable, and Enable & Activate. Intel Trusted Execution Technology  enables utilization of additional hardware capabilities provided by Intel® Trusted Execution Technology. Boot MenuBoot MenuBoot MenuBoot Menu    The Boot menu sets the sequence of the devices to be searched for the operating system. Information Main Advanced Security Boot ExitBoot priority order: 1. SATA ODD:2. SATA HDD1: TOSHIBA MQ01ABD032 3. USB HDD: 4. USB FDD: 5. PCI LAN: IBA GE Slot 00C8 v1365 6. USB ODD: 7. Other HDD: 8. ESATA HDD:         Item Specific HelpKeys used to view or configure devices: and  arrows Select a device. ’+’ and ’-’ moves the device up or down. ’Shift + 1’ enables or disables a device. ’Del’ deletes an unprotected device.F1  Help  ĖĘĖĘĖĘĖĘ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ĕėĕėĕėĕė Select Menu  Enter Select  Sub-Menu  F10 Save and Exit  The bootable devices will be automatically detected during POST and shown here, allowing you to set the sequence that the BIOS uses to look for a device from which to load the OS. Below is a brief description of keyboard usage:
Using BIOS Setup and System Recovery   5-15KeyKeyKeyKey    FunctionFunctionFunctionFunction    ↑ , ↓  Selects (highlight) a boot device. +, –  Changes the boot sequence. 1111 to 4444  Loads the default boot sequence. KeyKeyKeyKey    FunctionFunctionFunctionFunction    ffff or rrrr    Specifies if the boot device is fixed (ffff) or removable (rrrr). XXXX Moves the highlighted boot device from the “Boot priority order” list to the “Excluded from boot order” list, and vice versa. ShiftShiftShiftShift+1111Deactivates/activates the highlighted boot device on the “Boot priority order” list. When a device has been deactivated, an “!” (exclamation) symbol appears beside the item and system will bypass it when detecting boot device during POST.  Exit MenuExit MenuExit MenuExit Menu    The Exit menu provides ways of exiting BIOS Setup. After finishing with your settings, you must save and exit so that the changes can take effect. Information Main Advanced Security Boot ExitExit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes Item Specific HelpEqual to F10, save all changes of all menus, then exit setup configure driver. Finally resets the system automatically. F1  Help  ĖĘĖĘĖĘĖĘ Select Item  +/-   Change Values       F9 Setup Defaults Esc Exit  ĕėĕėĕėĕė Select Menu  Enter Select  Sub-Menu  F10 Save and Exit
5-16   Using BIOS Setup and System Recovery  Exit Saving Changes  Exit Saving Changes  Exit Saving Changes  Exit Saving Changes  saves the changes you have made and exits BIOS Setup Utility. Exit Discarding Changes  Exit Discarding Changes  Exit Discarding Changes  Exit Discarding Changes  exits BIOS Setup Utility without saving the changes you have made. Load Setup DefaultsLoad Setup DefaultsLoad Setup DefaultsLoad Setup Defaults  loads the factory default values for all the items. Discard Changes  Discard Changes  Discard Changes  Discard Changes  restores the previous values for all the items. Saves Changes  Saves Changes  Saves Changes  Saves Changes  saves the changes you have made.

Navigation menu