Getac Technology 300 notebook pc User Manual
Getac Technology Corp. notebook pc
Contents
- 1. USERS MANUAL
- 2. USERES MANUAL
USERES MANUAL
User’s Manual
(November 2007)
TRADEMARKS
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc.
All other brand and product names are trademarks or registered trademarks of
their respective owners.
NOTE
The information in this manual is subject to change without notice.
i
Table of Contents
Preface .....................................................................................vi
Chapter 1 Getting Started...................................................1-1
Getting the Computer Running ............................................ 1-2
Unpacking ........................................................................ 1-2
Connecting to AC Power ................................................. 1-2
Opening the Cover ........................................................... 1-4
Turning On and Off the Computer................................... 1-4
Taking a Look at the Computer............................................ 1-6
Right-Side Components ................................................... 1-6
Left-Side Components ..................................................... 1-9
Rear Components ........................................................... 1-10
Front Components.......................................................... 1-11
Bottom Components....................................................... 1-12
Top-open Components ................................................... 1-13
Where to Go from Here...................................................... 1-17
Chapter 2 Operating Your Computer.................................2-1
Starting and Stopping the Computer .................................... 2-2
Starting the Computer ...................................................... 2-2
Stopping the Computer .................................................... 2-2
Using the Quick Buttons ...................................................... 2-4
Using the Internal Keyboard ................................................ 2-6
Typewriter Keys............................................................... 2-6
Cursor-Control Keys ........................................................ 2-7
Numeric Keypad .............................................................. 2-7
Function Keys .................................................................. 2-8
Fn Key.............................................................................. 2-8
ii
Hot Keys .......................................................................... 2-8
Using the Touchpad ........................................................... 2-11
Configuring the Touchpad ............................................. 2-13
Using the Touchscreen (Optional) ..................................... 2-14
Using the Hard Disk Drive................................................. 2-16
Installing a Second Hard Disk Drive (Optional)............ 2-16
Using the Optical Drive (Optional) .................................... 2-18
Inserting and Removing a Disc ...................................... 2-19
Using the Video Features ................................................... 2-21
Configuring the Display Modes ..................................... 2-21
Using the Audio Features................................................... 2-23
Connecting Audio Devices ............................................ 2-24
Using the Communication Features ................................... 2-25
Using the Modem........................................................... 2-25
Using the LAN ............................................................... 2-26
Using the Wireless LAN ................................................ 2-27
Using the Bluetooth® Feature......................................... 2-30
Using the Fingerprint Sensor.............................................. 2-35
Enrolling Fingerprints .................................................... 2-37
Changing the Settings .................................................... 2-39
Chapter 3 Managing Power ................................................3-1
AC Adapter .......................................................................... 3-2
Battery Pack ......................................................................... 3-3
Charging the Battery Pack ............................................... 3-3
Initializing the Battery Pack............................................. 3-4
Checking the Battery Level.............................................. 3-4
Replacing the Battery Pack .............................................. 3-5
Installing a Second Battery Pack (Optional) .................... 3-6
Battery Low Signals and Actions..................................... 3-9
Power Management............................................................ 3-10
Hibernation..................................................................... 3-11
Power-Saving Tips ............................................................. 3-12
iii
Chapter 4 Expanding Your Computer ...............................4-1
Connecting an External Monitor .......................................... 4-2
Connecting a Serial Device .................................................. 4-4
Connecting a USB Device.................................................... 4-6
Connecting an IEEE 1394 Device........................................ 4-7
Using Smart Cards (Optional).............................................. 4-8
Inserting and Removing a Smart Card ............................. 4-8
Using PC Cards .................................................................. 4-10
Inserting and Removing a PC Card................................ 4-10
Using ExpressCards (Optional).......................................... 4-12
ExpressCard Type .......................................................... 4-12
Inserting and Removing an ExpressCard ....................... 4-13
Using the Card Reader ....................................................... 4-14
Using the Port Replicator (Optional).................................. 4-16
System Memory Upgrade................................................... 4-17
Chapter 5 Using BIOS Setup..............................................5-1
When and How to Use BIOS Setup ..................................... 5-2
When to Use..................................................................... 5-2
Starting BIOS Setup......................................................... 5-2
Moving Around and Making Selections .......................... 5-4
Information Menu ................................................................ 5-5
Main Menu ........................................................................... 5-6
Advanced Menu ................................................................... 5-7
Security Menu ...................................................................... 5-9
Boot Menu.......................................................................... 5-11
Exit Menu........................................................................... 5-12
When and How to Use the System Recovery Feature........ 5-13
When to Use................................................................... 5-13
Starting System Recovery .............................................. 5-13
Chapter 6 Using the TPM and P1 Utility ............................6-1
Using TPM (Trusted Platform Module)............................... 6-2
P1 Quick Launch Key Utility............................................... 6-3
iv
Chapter 7 Caring for the Computer ...................................7-1
Protecting the Computer....................................................... 7-2
Using the Windows Security Center ................................ 7-2
Using the Cable Lock....................................................... 7-4
Taking Care of the Computer............................................... 7-5
Location Guidelines ......................................................... 7-5
General Guidelines........................................................... 7-5
Cleaning Guidelines ......................................................... 7-6
Battery Pack Guidelines................................................... 7-6
Touchscreen Guidelines ................................................... 7-7
When Traveling.................................................................... 7-9
Chapter 8 Troubleshooting.................................................8-1
Preliminary Checklist........................................................... 8-2
Solving Common Problems.................................................. 8-3
Battery Problems.............................................................. 8-4
Bluetooth Wireless Transmission Problems..................... 8-4
Display Problems ............................................................. 8-5
ExpressCard Problems ..................................................... 8-6
Hardware Device Problems.............................................. 8-6
Hard Disk Drive Problems ............................................... 8-7
Keyboard, Mouse, and Touchpad Problems .................... 8-7
LAN Problems ................................................................. 8-8
WLAN Problems.............................................................. 8-8
Modem Problems ........................................................... 8-10
Optical Drive Problems.................................................. 8-10
PC Card Problems .......................................................... 8-11
Power Management Problems........................................ 8-12
Software Problems ......................................................... 8-13
Sound Problems ............................................................. 8-13
Startup Problems ............................................................ 8-14
Other Problems............................................................... 8-14
Resetting the Computer...................................................... 8-15
v
Appendix A Specifications ...................................................A-1
Appendix B Regulatory Information ....................................B-1
On the Use of the System.....................................................B-2
Class B Regulations .........................................................B-2
Safety Notices ..................................................................B-3
On the Use of the RF Device................................................B-6
USA and Canada Safety Requirements and Notices........B-6
European Union CE Marking and Compliance Notices ..B-9
电子信息产品有毒有害物质或元素名称及含量标示....B-13
vi
Preface
This manual contains information that will help you operate the
computer. It is divided into 8 chapters and 2 appendices.
z Chapter 1, Getting Started, takes you through the process of setting
up the computer and identifying its external components.
z Chapter 2, Operating Your Computer, tells you how to use the
computer’s components and features.
z Chapter 3, Managing Power, provides information on power.
z Chapter 4, Expanding Your Computer, provides information on
installing and using peripheral devices.
z Chapter 5, Using BIOS Setup, describes the BIOS Setup program
that configures the computer’s BIOS settings.
z Chapter 6, Using the TPM and P1 Utilities, describes how to use
TPM (Trusted Platform Module) and P1 quick launch key utilities.
z Chapter 7, Caring for the Computer, gives you tips in care and
maintenance.
z Chapter 8, Troubleshooting, gives solutions to common problems
you may encounter when using the computer.
z Appendix A, Specifications, gives a brief specification of the
computer.
z Appendix B, Regulatory Information, provides regulatory
statements and safety notices on your computer.
vii
Notational Conventions
Throughout this manual, the following conventions are used to
distinguish elements of text.
NOTE: identifies additional information that requires special attention.
CAUTION: identifies important information that, if not followed, may result in loss of
data or damage to the computer.
Keyboard keys are shown in a bold typeset. For example:
Press the Enter key to complete.
When keys are joined by a plus sign (+), press the first key, and, while
keeping the first key down, press the remaining keys, finally release all
the keys. When necessary, keys are also shown in graphics.
A title, command, setup item, or button that you can see on the screen is
shown in boldface. A value or an option that you can select for a setup
item is shown in italic. For example:
Select When I press the power button, set it to Shut down, and
then click the Save changes button.
Getting Started 1-1
Chapter 1
Getting Started
Congratulations on purchasing this rugged computer.
This chapter first tells you step by step how to get the computer up and
running. You will find instructions for these procedures:
z Unpacking
z Connecting to AC power
z Opening and closing the cover
z Turning on the computer
z Turning off the computer
Then, you will find a section briefly introducing the external components
of the computer. And the last section navigates you to the information you
may need after the computer is ready for use.
CHAPTER
Getting Started 1-2
Getting the Computer Running
This section guides you through the procedures for getting the computer
ready for operation.
Unpacking
After unpacking the shipping carton, you should find these standard
items:
z Rugged computer
z Accessories:
− AC adapter
− AC power cord
− Touchscreen pen (depending on your model)
Inspect all the items. If any item is damaged or missing, notify your dealer
immediately.
Keep the shipping carton and packing materials in case you need to ship
or store the computer in the future.
Connecting to AC Power
The computer operates either on the external AC power or internal battery
power. It is suggested that you use AC power when you start up the
computer for the very first time.
CAUTION: Use only the AC adapter included with your computer. Using other AC
adapters may damage the computer.
1. Make sure that the computer is turned off.
2. Plug the DC cord of the AC adapter to the power connector of the
computer (n).
Getting Started 1-3
3. Plug the female end of the AC power cord to the AC adapter and the
male end to an electrical outlet (o).
4. Power is being supplied from the electrical outlet to the AC adapter
and onto your computer. Now, you are ready to turn on the computer.
5. When the AC adapter is connected, it also charges the battery pack.
The Battery Charge Indicator on the computer glows amber to
indicate that charging is in progress. When the battery is fully
charged, the Battery Charge Indicator ( ) glows green. (For
information on using battery power, see Chapter 3.)
CAUTION:
z When you disconnect the AC adapter, disconnect from the electrical outlet first and
then from the computer. A reverse procedure may damage the AC adapter or the
computer.
z When unplugging the connector, always hold the plug head. Never pull on the cord.
Getting Started 1-4
Opening the Cover
CAUTION: Be gentle when opening and closing the cover. Opening it vigorously or
slamming it shut could damage the computer.
Open the top cover by pushing on the cover latch (n) and lifting up the
cover (o). You can tilt the cover forward or backward for optimal
viewing clarity.
Turning On and Off the Computer
Turning On
1. Make sure that the computer is connected to AC power or battery is
fully charged.
Getting Started 1-5
2. Press the power button ( ).
3. Each time the computer is turned on, it performs a Power-On Self
Test (POST), and the Windows operating system should start.
Turning Off
To turn off the computer power, use the “Shut Down” command of your
operating system.
NOTE: There are other ways you can stop the computer so that you will be back to
where you left off when you next turn on the computer. (See “Stopping the Computer” in
Chapter 2 for information.)
CAUTION: If you have to turn the computer on again immediately after turning it off,
wait for at least five seconds. Turning the computer off and on rapidly can damage it.
Getting Started 1-6
Taking a Look at the Computer
This section identifies the external components of the computer and
briefly describes the function of each component.
NOTE: Depending on the model you purchased, the appearance of your computer may
not be exactly the same as those shown in this manual.
Right-Side Components
NOTE: You may need to open the covers to be able to see the right-side components.
Ref Component Description See Also
Expansion Card
Slot Depending on your model, the expansion card
slot can be any of the following:
ExpressCard Slot Accepts an ExpressCard/34 / ExpressCard/54
for additional functions.
P. 4-12
n
PCMCIA Slot Accepts a PC card for additional functions. P. 4-10
Getting Started 1-7
Ref Component Description See Also
o Mini IEEE 1394
Port Connects an IEEE 1394 device such as a
scanner, printer, DVCAM, VCR, and more.
P. 4-7
p RF (radio
frequency) On/Off
Switch
Serves as the master control that turns the
wireless LAN radio, Bluetooth radio, on/off.
P. 2-28,
2-30
q Card Reader Accepts a MultiMediaCard (MMC), Secure
Digital (SD), Memory Stick (MS) or Memory
Stick PRO (MS PRO) card for removable
storage media.
P. 4-14
r RJ-11 Connector Connects the telephone line. P. 2-25
s Hard Disk Drive
Compartment Inside is the hard disk drive. P. 2-16
t USB Ports Each of the two ports connects a USB device,
such as a USB flash disk, printer, digital
camera, joystick, and more.
P. 4-6
Expansion Card
Slot Depending on your model, the expansion card
slot can be any of the following:
Smart Card
Reader Accepts a smart card for additional security
feature.
P. 4-8
u
PCMCIA Slot Accepts a PC card for additional functions. P. 4-10
v Audio Output
Connector Connects a set of headphones, external
speakers with amplifier, or an audio recording
device.
P. 2-24
w Microphone
Connector Connects an external microphone. P. 2-24
RJ-45 Connector Connects the LAN cable. P. 2-26
Getting Started 1-8
Left-Side Components
NOTE: You may need to open the covers to be able to see the left-side components.
Ref Component Description See Also
n Battery Pack Supplies power to your computer when
external power is not connected.
P. 3-3
Media Bay Depending on your model, the media bay may
contain any of the following:
Combo Drive/
DVD Dual Drive/
Super Multi
Drive
Accepts a compact disc for installing or
loading software, accessing data, and playing
music/video.
P. 2-18
Secondary
Battery Pack Supplies power to your computer when
external power is not connected.
P. 3-6
o
Secondary Hard
Disk Drive Inside is the hard disk drive. P. 2-16
Getting Started 1-9
Rear Components
NOTE: You may need to open the covers to be able to see the rear components.
Ref Component Description See Also
n Power Connector Connects the AC adapter. P. 1-2
o USB Port Connects a USB device, such as a USB flash
disk, printer, digital camera, joystick, and
more.
P. 4-6
p Expansion Bus
Connector Connects to a Port Replicator. P. 4-16
q VGA Connector Connects an external display monitor. P. 4-2
r Serial Connector Connects a serial mouse or serial
communication device.
P. 4-4
s Kensington Lock Locks the computer to a stationary object for
security.
P. 7-4
Getting Started 1-10
Front Components
Ref Component Description See Also
n Top Cover Latch Locks the top cover. P. 1-4
o Handle Provides a convenient way to carry the
computer anywhere.
Getting Started 1-11
Bottom Components
Ref Component Description See Also
n Memory Slots Inside are the memory slots for expanding
the memory size of your computer.
P. 4-17
Getting Started 1-12
Top-open Components
Ref Component Description See Also
n LCD Screen Displays the output of the computer. May
include the optional touchscreen feature.
P. 2-21
Getting Started 1-13
Ref Component Description See Also
Quick Buttons
P1 Turns off/on the LCD display and LED
indicators, or
User customized program quick launch key.
NOTE: The function of P1 quick button depends on
your setting in BIOS Setup program under the
Advanced menu (see chapter 5 for details).
P. 2-21
P. 6-3
Enables/disables power saving when using
battery power.
Lights green when power saving mode is ON.
P. 2-4
Enables/disables sunlight readable display.
Lights green when sunlight readable mode is
ON.
P. 6-2
Enables/disables light sensor.
o
Lights green when light sensor is ON.
P. 2-21
p Power Button Turns the computer power ON and OFF. P. 1-4
q Touchscreen Pen
(Optional) Provides a convenient way to use the
touchscreen. Can be stretched for better grip
and handling.
P. 2-14
r Touchpad Serves as the pointing device of the computer. P. 2-11
Indicators Show the current status of the computer’s
devices.
Hard Disk Drive
/ Optical Drive
Blinks green when computer is reading /
writing data to the hard disk or optical drive.
P. 2-16
Card Reader
Blinks green when computer is reading /
writing data to the storage card.
P. 4-14
Caps Lock Lights green when Caps Lock is on. P. 2-6
Lights green when Num Lock is on. P. 2-28
s
Num Lock / HDD
Heater (option)
Lights amber when optional hard disk heater is
on (temperature is lower than 5 oC when
booting your computer).
Getting Started 1-14
Ref Component Description See Also
t Microphone Receives sound and voice for the computer. P. 2-23
u Keyboard Serves as the data input device of the
computer.
P. 2-6
v Fingerprint
Sensor Serves as the fingerprint verification,
preventing unauthorized access to your
computer.
P. 2-35
w Stereo Speaker Sends out sound and voice from the computer. P. 2-23
Indicators Show the current status of the computer’s
devices.
Lights green when computer is on.
Power
Blinks green when computer is on Sleep mode.
P. 1-4
Lights green when the battery is fully charged.
Lights amber when the battery is being
charged.
Blinks red when the battery’s capacity is
below 10 %.
Battery Charge
Blinks amber when the battery is in an
abnormal condition.
P. 3-3
WLAN Lights green when WLAN is on. P. 2-28
Bluetooth Lights green when Bluetooth is on. P. 2-30
Reserved for future option.
Getting Started 1-15
Where to Go from Here
As your computer is ready for operation, you may want to do any of the
following now:
For this purpose... Do this...
To know more about the computer... Go on to the next chapter.
To install the operating system if your
dealer has not already done so...
See the operating system manual.
To know more about the operating
system...
Read the operating system manual.
To set a power-on password... Read the operating system manual.
To charge the battery pack for the first
time...
See “Charging the Battery Pack” in
Chapter 3.
Operating Your Computer 2-1
Chapter 2
Operating Your Computer
This chapter provides information about the use of the computer.
If you are new to computers, reading this chapter will help you learn the
operating basics. If you are already a computer user but are new to rugged
computers, you may choose to read only the parts containing information
unique to your computer.
Described in this chapter are the operating basics of these components /
features:
z Starting and stopping the computer
z Quick buttons
z Keyboard
z Touchpad
z Touchscreen (option)
z Hard disk drive
z DVD drive
z Video features
z Audio features
z Communication features
z Fingerprint sensor
CHAPTER
Operating Your Computer 2-2
Starting and Stopping the Computer
There are a number of ways to start and stop the computer.
Starting the Computer
You always start the computer using the power button ( ).
A computer starts up with an operating system (OS) existing on the
storage device such as the hard disk. The computer will automatically
load the OS after you turn it on. This process is called booting.
NOTE: An operating system is the platform for all your software application programs to
run on. Your computer uses the Microsoft Windows Vista operating system.
Stopping the Computer
When you finish a working session, you can stop the computer by turning
off the power or leaving the computer in Sleep or Hibernation mode:
To stop in
this mode... Do this... To start up or
resume again
Off Click Start Æ Shut Down … This can
prevent loss of unsaved data or damage to
your software programs.
If the system is locked up because of
hardware or software problems, press the
power button to turn off the computer.
Press the power
button.
Sleep Depending on your settings in Windows,
you can place the computer in Sleep
mode by:
• Closing the display cover
• Pressing the Fn+F12 hot key
• Pressing the power button
Press the power
button.
Operating Your Computer 2-3
To stop in
this mode... Do this... To start up or
resume again
Hibernation Depending on your settings in Windows,
you can place the computer in
Hibernation mode by:
• Closing the display cover
• Pressing the power button
Press the power
button.
If you choose to stop in Sleep or Hibernation mode, you can return to
where you left off the next time you start up the computer. (See “Power
Management” in Chapter 3 for more information.)
Operating Your Computer 2-4
Using the Quick Buttons
Located on top of the keyboard are five quick buttons:
z LCD display and LED indicators quick button (P1) to turn off the
LCD display and LED indicator, or
User customized program quick launch key (P1) – see chapter 6 for
more details.
NOTE: The function of P1 quick button depends on your setting in BIOS Setup program
under the Advanced menu (see chapter 5 for details).
z Power saving quick button ( ) to enter into power saving mode
when using battery power. The system will turn down the panel
backlight and sacrifice processing speed to gain more battery life.
Lights green when power saving mode is enabled.
NOTE: The power saving quick button works only when using battery power.
z Sunlight readable quick button ( ) for enabling the sunlight
readable LCD display.
Lights green when sunlight readable mode is enabled.
Operating Your Computer 2-5
z Light sensor quick button ( ) for adjusting the LCD brightness
automatically based on your computer’s surrounding lighting
condition.
Lights green when light sensor is enabled.
Operating Your Computer 2-6
Using the Internal Keyboard
Your keyboard has all the standard functions of a full-sized computer
keyboard plus a Fn key added for specific functions.
The standard functions of the keyboard can be further divided into four
major categories:
z Typewriter keys
z Cursor-control keys
z Numeric keys
z Function keys
Typewriter Keys
Typewriter keys are similar to the keys on a typewriter. Several keys are
added such as the Ctrl, Alt, Esc, and lock keys for special purposes. When
the lock keys (Caps Lock, Num Lk, and Scr Lk) are pressed, their
corresponding indicators light up.
The Control (Ctrl) / Alternate (Alt) key is normally used in combination
with other keys for program-specific functions. The Escape (Esc) key is
usually used for stopping a process. Examples are exiting a program and
canceling a command. The function depends on the program you are
using.
Operating Your Computer 2-7
Cursor-Control Keys
NOTE: The word “cursor” refers to the indicator on the screen that lets you know
exactly where on your screen anything you type will appear. It can take the form of a
vertical or horizontal line, a block, or one of many other shapes.
Numeric Keypad
A 15-key numeric keypad is embedded in the typewriter keys as shown
next:
Operating Your Computer 2-8
Numeric keys facilitate entering of numbers and calculations. When Num
Lock is on, the numeric keys are activated; meaning you can use these
keys to enter numerals.
NOTE:
z When the numeric keypad is activated and you need to type the English letter in the
keypad area, you can turn Num Lock off or you can press Fn and then the letter
without turning Num Lock off.
z Some software may not be able to use the numeric keypad on the computer. If so,
use the numeric keypad on an external keyboard instead.
Function Keys
On the top row of the keys are the function keys: F1 to F12. Function keys
are multi-purpose keys that perform functions defined by individual
programs.
Fn Key
The Fn key, at the lower left corner of the keyboard, is used with another
key to perform the alternative function of a key. The letter “Fn” and the
alternative functions are identified by the color of blue on the keytop. To
perform a desired function, first press and hold Fn, then press the other
key.
Hot Keys
Hot keys refer to a combination of keys that can be pressed any time to
activate special functions of the computer. Most hot keys operate in a
cyclic way. Each time a hot key combination is pressed, it shifts the
corresponding function to the other or next choice.
You can easily identify the hot keys with the icons imprinted on the
keytop. The hot keys are described next.
Operating Your Computer 2-9
Key Description
Switches the wireless LAN radio on and off.
Switches the night vision feature on and off for viewing the
display when using night vision goggles (optional).
Decreases the sound volume.
Increases the sound volume.
Switches the display output to one of the following when
external devices are connected.
Upon booting the system with CRT:
LCD CRT
LCD & CRT
NOTE: This function only applies to Plug & Play display
devices.
Decreases the LCD brightness.
Increases the LCD brightness.
Switches the touchscreen on and off (option).
Switches the touchpad off and on.
Switches the system sound output off (mute) and on.
Switches the display on and off.
Operating Your Computer 2-10
Key Description
Serves as the sleep button that you can define with Windows’
Power Options. (See the “Power Management” in Chapter 3.)
Switches the keyboard backlight on and off (option).
Euro Symbol
You can press the euro dollar sign on various keyboards.
z To press the euro sign on a United States-International keyboard, hold
down the Alt Gr key and press 5 (which has an euro sign on it).
z To press the euro sign on a standard United States keyboard, hold
down either of the Alt keys and type 0128 on the numeric keypad part
of your keyboard.
z To press the euro sign on an UK keyboard, hold down the Alt Gr key
and press 4 (which has an euro sign on it).
Windows Keys
The keyboard has two keys that perform Windows-specific functions.
The Windows Logo key opens the Start menu and performs
software-specific functions when used in combination with other keys.
The Application key usually has the same effect as a right mouse
click. (See your Windows manual for more information.)
Operating Your Computer 2-11
Using the Touchpad
CAUTION: Do not use a sharp object such as a pen on the touchpad. Doing so may
damage the touchpad surface.
NOTE:
z Press Fn+F9 to toggle the touchpad on or off.
z For optimal performance of the touchpad, keep your fingers and the pads clean and
dry. When tapping on the pad, tap lightly. Do not use excessive force.
The touchpad is a pointing device that allows you to communicate with
the computer by controlling the location of the pointer on the screen and
making selection with the buttons.
The touchpad consists of a rectangular pad (work surface) and a left and
right buttons. To use the touchpad, place your forefinger or thumb on the
pad. The rectangular pad acts like a miniature duplicate of your display.
As you slide your fingertip across the pad, the pointer (also called cursor)
on the screen moves accordingly. When your finger reaches the edge of
the pad, simply relocate yourself by lifting the finger and placing it on the
other side of the pad.
Operating Your Computer 2-12
Here are some common terms that you should know when using the
touchpad:
Term Action
Point Move your finger on the pad until the cursor points to the
selection on the screen.
Click Press and release the left button.
–or–
Tap gently anywhere on the pad.
Double-click Press and release the left button twice in quick succession.
–or–
Tap twice on the pad rapidly.
Drag and
drop
Press and hold the left button, then move your finger until
you reach your destination (drag). Finally, release the
button (drop) when you finish dragging your selection to
the destination. The object will drop into the new location.
–or–
Gently tap twice on the pad and on the second tap, keep
your finger in contact with the pad. Then, move your
finger across the pad to drag the selected object to your
destination. When you lift your finger from the pad, the
selected object will drop into place.
Scroll To scroll is to move up and down or left and right in the
working area on the screen.
To move vertically, place your finger on the right or left
edge of the pad and slide your finger up and down along
the edge. To move horizontally, place your finger on the
top or bottom edge of the pad and slide your finger left and
right.
This function works only after you install the touchpad
driver supplied with the computer and it may not work for
all applications.
TABLE NOTE: If you swap the left and right buttons, “tapping” on the touchpad
as an alternative method of pressing the left button will no longer be valid.
Operating Your Computer 2-13
Configuring the Touchpad
You may want to configure the touchpad to suit your needs. For example,
if you are a left-handed user, you can swap the two buttons so that you can
use the right button as the left button and vise versa. You can also change
the size of the on-screen pointer, the speed of the pointer, and so on.
To configure the touchpad, go to Control Panel Æ Hardware and Sounds
Æ Mouse Properties. However, you can install the touchpad driver
supplied with your computer to take advantage of more powerful
features.
Operating Your Computer 2-14
Using the Touchscreen (Optional)
NOTE:
z Make sure the touchscreen driver has been installed properly.
z Press Fn+F8 to toggle the touchscreen on or off.
CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on the
touchscreen. Doing so may damage the touchscreen surface. Use your finger or the
included touchscreen pen (option).
The touchscreen is a touch-sensitive device that allows you to easily use
the computer without a mouse or touchpad to communicate with the
computer by controlling the location of the pointer on the screen and
making selection by tapping on the screen.
Operating Your Computer 2-15
Here are some common terms that you should know when using the
touchscreen:
Term Action
Click/Point Tap gently on the touchscreen.
Double-click Tap twice on the touchscreen rapidly.
Drag and
drop
Press lightly on the touchscreen and move your finger/
touchsreen pen until you reach your destination (drag).
Finally, release your finger/touchscreen pen (drop) when
you finish dragging your selection to the destination. The
object will drop into the new location.
Operating Your Computer 2-16
Using the Hard Disk Drive
Your computer comes with a removable hard disk drive as drive C. A
hard disk drive is a storage device with non-removable, rotating,
magnetic storage platters inside it. It is where your operating system and
application software programs are stored.
Your hard disk drive is a 2.5-inch PATA (parallel ATA) / SATA (serial
ATA) hard disk drive. This type of drive embodies the latest in fast,
reliable mass storage by integrating all the control circuitry necessary for
operation directly onto the drive itself.
The system may come with an optional heater that automatically turns on
for low temperature operation.
CAUTION:
z Make regular backups of your data files from your hard disk drive to USB flash disks
or other storage media.
z Never try to remove or install the hard disk drive while the computer is powered on.
Doing so can result in loss of data, and can damage the computer and the hard disk
drive’s sensitive circuitry.
z Never turn off or reset the computer while the hard disk drive in-use indicator is on.
Installing a Second Hard Disk Drive (Optional)
You can install a second hard disk drive to your computer. To install a
second hard disk drive:
1. Make sure that system power is off.
2. Open the media bay cover by sliding the release latch towards the left.
3. Press upward the optical drive release latch (n) and carefully pull on
the ribbon strip (o) to remove the optical drive.
Operating Your Computer 2-17
4. Be careful to observe the correct orientation and slide the hard disk
drive bracket into the media bay until it reaches the end.
5. Close the media bay cover to secure the hard disk drive bracket.
NOTE: To remove the second hard disk drive, press upward the hard drive release
latch (n) and carefully pull on the ribbon strip (o) to remove the hard drive.
Operating Your Computer 2-18
Using the Optical Drive (Optional)
Your computer may come with an optical drive, usually configured as
drive D.
Depending on the model, your drive is one of the following:
z Combo drive can work both as a DVD drive (reading DVD discs in
addition to CDs, audio CDs and CD-R/-RW discs), and also as a CD
recorder (writing to CD-R/-RW discs).
z DVD Dual drive besides the Combo drive function, can write to
DVD+R/+RW/-R/-RW discs.
z Super Multi drive besides the Combo drive function, can write to
DVD+R/+RW/-R/-RW and DVD-RAM discs.
CAUTION:
z When inserting a disc, do not use force.
z Make sure that the disc is correctly inserted into the tray, and then close the tray.
z Do not leave the drive tray open. Also, avoid touching the lens in the tray with your
hand. If the lens becomes dirty, the optical drive may malfunction.
z Do not wipe the lens using materials with rough surface (such as paper towel).
Instead, use a cotton swab to gently wipe the lens.
FDA regulations require the following statement for all laser-based devices:
“Caution, Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.”
NOTE: The optical drive is classified as a Class 1 laser product. This label is located on
the optical drive.
NOTE: For DVD and Combo drives only.
This product incorporates copyright protection technology that is protected by method
claims of certain U.S. patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Operating Your Computer 2-19
Inserting and Removing a Disc
Follow this procedure to insert or remove a disc:
1. Turn on the computer.
2. Open the media bay cover by sliding the release latch towards the left.
3. Press the eject button and the DVD tray will slide out partially.
Gently pull on it until it is fully extended.
4. To insert a disc, place down the disc in the tray with its label facing
up. Slightly press the center of the disc until it clicks into place.
To remove a disc, hold the disc by its outer edge and lift it up from the
tray.
5. Gently push the tray back into the drive.
Eject button
Operating Your Computer 2-20
6. Close the media bay cover.
NOTE: In the unlikely event that you are unable to release the drive tray by pressing the
eject button, you can manually release the disc. (See “Optical Drive Problems” in
Chapter 8.)
Operating Your Computer 2-21
Using the Video Features
The video subsystem of your computer features:
z 13.3-inch wide TFT (Thin-Film Transistor) color LCD display with
1024×768 XGA resolution
z Multi-display capability, which allows you to expand your desktop
on the screen to another display device so that you have more desktop
space to work on
z Sunlight-readable LCD display by pressing sunlight readable quick
button ( )
z Automatically adjust the LCD brightness by pressing light sensor
quick button ( )
z Optional night vision display by pressing Fn + F2.
z Power Management
NOTE: The computer enters the Sleep or Hibernation mode when the LCD is closed. If
you want to use the computer with the LCD closed, set Do Nothing to the “When I Close
the lid” option in the Power Options Æ System Settings Properties. Thus the
computer does not enter the Sleep or Hibernation mode when the LCD is closed.
Configuring the Display Modes
NOTE: When using an external CRT monitor, the resolution depends on the CRT
monitor’s supported resolution.
Your computer has been set to a default resolution and number of colors
before shipment. You can view and change display settings through your
operating system. See your operating system documentation or online
help for specific information.
For displaying in higher resolutions, you can connect an external monitor
that supports higher resolutions. (See “Connecting an External Monitor”
in Chapter 4 for more information.)
Operating Your Computer 2-22
Using the Audio Features
NOTE: If you experience interference while recording, try lowering the microphone
recording volume.
The audio subsystem of your computer features:
z Azalia interface (high density audio codec)
z 2-channel analog output
z Built-in microphone (n)
z External audio connectors (o) and
z Set of speakers (p)
Ways of playing and recording sound vary with the operating system
used. See your operating system documentation or online help for
specific information.
Operating Your Computer 2-23
Connecting Audio Devices
For higher audio quality, you can send or receive sound through external
audio devices.
NOTE: After connecting an external audio device, make sure that you specify the use of
the correct audio device in Windows.
z Audio Output Connector (green) can be connected to speakers,
headphones, or earphone set.
z Microphone Connector (pink) can be connected to an external
microphone for recording voice or sound.
NOTE: When using the external speakers/headphones or microphone, you cannot use
the internal one.
Operating Your Computer 2-24
Using the Communication Features
Using the Modem
The internal 56 K fax/data modem allows you to use the telephone line to
communicate with others by fax, email, or connect to an online service or
bulletin board.
To connect the telephone line to the modem, connect one end of the
modem cable to the RJ-11 connector on the computer and the other end to
the phone line.
NOTE:
z When using the communication software, you may have to disable power
management.
z Set the COM port of the modem to COM3.
z Set parameters such as modem speed (baud rate) and line type (pulse dialing or
tone dialing).
z Do not enter the Sleep mode when using the communication software.
Operating Your Computer 2-25
Using the LAN
The internal 10/100/1000Base-T LAN (Local Area Network) module
allows you to connect your computer to a network. It supports data
transfer rate up to 1000 Mbps.
To connect the network cable to the LAN module, connect one end of the
LAN cable to the RJ-45 connector on the computer and the other end to
the network hub.
Operating Your Computer 2-26
Using the Wireless LAN
Depending on your model, an internal mini PCI-E wireless LAN
(WLAN) card may have been pre-installed by your computer
manufacturer at the factory. This card allows you to access corporate
networks or the Internet in a wireless environment.
The WLAN features include:
z Access Point (Infrastructure) mode support
z WEP (Wired Equivalent Privacy) 64/128-bit data encryption
z IEEE 802.11a/b/g/n standard compliance
Technology
Stated
Maximum
Throughput
(Mbps)
Data Rates
(Mbps)
Band (GHz)
Modulation Technology
802.11a 54 54, 48, 36,
24, 18, 12,
9, 6
5.15 ~ 5.35 OFDM (Orthogonal Frequency
Division Multiplexing)
802.11b 11 11, 5.5, 2, 1 2.412 ~ 2.462 DSSS (Direct Sequence Spread
Spectrum)
802.11g 54 54, 36, 18,
9
2.4 OFDM (Orthogonal Frequency
Division Multiplexing)
802.11n 100 Mbps or
more
100 ~ 210 2.4 / 5 Spatial multiplexing, uses MIMO
(multiple-input multiple-output)
NOTE: 802.11g mode is backward compatible with 802.11b mode.
If your WLAN card was provided by your dealer instead of the computer
manufacturer, contact your dealer for the correct driver to use.
Operating Your Computer 2-27
Turning Off/On the WLAN Radio
NOTE: The FAA (Federal Aviation Agency) has deemed it unsafe to operate wireless
devices in aircraft as this may interfere with flight safety. Remember to turn off wireless
LAN when using your computer in the airplane.
To turn on the WLAN radio:
1. Make sure that the RF switch is at the ON position.
2. Press Fn+F1 to turn on the WLAN radio (see “Hot Keys” in Chapter
2), indicated by the WLAN indicator ( ) glowing in green when
on.
If you need to temporarily turn off the radio, press Fn+F1. To resume
network connection, press Fn+F1 again.
It takes approximately 30 seconds for your computer to make a successful
WLAN connection and approximately 10 seconds to disconnect.
Connecting to a Wireless Network
To connect to a wireless network:
1. Make sure that the WLAN radio is on (see the previous section).
2. Right-click the Wireless Network Connection icon located on the
Windows system tray and select Connect to a network.
Operating Your Computer 2-28
3. If any wireless network is detected, the following window appears on
screen. Click the Show drop down menu and select Wireless.
4. Select a wireless network to connect to by clicking a selection, then
click Connect.
5. Depending on the settings, you may be asked to enter a WEP key
(refer to your Windows online help for more information on setting a
wireless network connection).
Operating Your Computer 2-29
Using the Bluetooth® Feature
Depending on your model, your computer may incorporate the Bluetooth
capability for short-range (about 10 meters) wireless communications
between devices without requiring a cable connection.
With Bluetooth wireless technology, data can be transmitted through
walls, pockets and briefcases as long as two devices are within range.
Turning On and Off the Bluetooth Feature
1. Make sure that the RF switch is at the ON position.
2. Right-click the GETAC Utility icon ( ) located on Windows
system tray and select Quick Bar.
Operating Your Computer 2-30
3. The following appears onscreen. To turn on the Bluetooth feature,
click the Bluetooth quick button.
The Bluetooth indicator ( ) will glow in green. By default, your
computer is in the general discoverable and pairable mode after the
Bluetooth feature is turned on.
4. To turn off the Bluetooth feature, click the Bluetooth quick button
again.
The status of the Bluetooth connection is indicated by the Bluetooth icon
located in the system tray in the lower-right part of the screen.
Status Icon
Off (blue with red logo)
On (blue with white logo).
Connected (blue with green logo)
You can use the Bluetooth Utility to configure Bluetooth wireless
connection settings and transfer files.
Connecting to Another Bluetooth Device
1. Make sure that the target Bluetooth device is turned on, discoverable
and within close range. (See the documentation that came with the
Bluetooth device.)
Operating Your Computer 2-31
2. Right-click the icon, and then click Add New Connection.
3. The Add New Connection Wizard window appears. Select Express
Mode (Recommended), and then click Next.
Operating Your Computer 2-32
4. Select the device to connect to and click Next.
5. Depending on the type of Bluetooth device that you want to connect
to, you will need to enter the pertinent information.
Sending a File
1. Make sure that the target Bluetooth device is turned on, discoverable
and within close range. (See the documentation that came with the
Bluetooth device.)
2. Right-click the icon, and then click Wireless File Transfer.
Operating Your Computer 2-33
3. In the Wireless File Transfer window, click Add to browse for the file
to send.
4. Click the target device from the list, and then click Send to start the
transfer procedure.
Operating Your Computer 2-34
Using the Fingerprint Sensor
To start using the fingerprint sensor:
1. Locate and slide open the fingerprint sensor cover.
Operating Your Computer 2-35
2. Go to Start menu Æ Programs Æ Protector Suite QL Æ Control
Center. The following screen appears.
The computer features the Fingerprint Control Center utility for enrolling
your fingers for added security. It contains the following:
• Fingerprints – for enrolling or editing fingerprint templates
• Settings – for configuring the fingerprint software
• Help – for browsing the Fingerprint Control Center online Help
NOTE: For an online Help information on using the Embassy Security Center, you can
also go to Start menu Æ Programs Æ Protector Suite QL Æ Help.
Operating Your Computer 2-36
Enrolling Fingerprints
To start enrolling your fingerprint(s):
1. Click Fingerprints on the main menu.
2. Then click Initialize.
Operating Your Computer 2-37
3. The following screen appears. Read carefully the contents of the
Welcome screen and then click Next to continue.
4. Follow the onscreen instructions to complete enrolling your
fingerprint(s).
Operating Your Computer 2-38
Changing the Settings
To change the settings of your fingerprint software:
1. Click Settings on the main screen.
2. Then click System Settings.
Operating Your Computer 2-39
3. The following screen appears. Proceed to make the necessary settings
to your fingerprint software.
4. Click OK after you have finished with your settings.
Managing Power 3-1
Chapter 3
Managing Power
Your computer operates either on external AC power or on internal
battery power.
This chapter tells you how you can effectively manage power. To
maintain optimal battery performance, it is important that you use the
battery in the proper way.
The topics in this chapter include:
z What is an AC adapter
z How to charge the battery pack
z When and how to initialize the battery pack
z How to check the battery level
z How to replace the battery pack
z What happens when the battery is low and what actions to take
z What is Power Management
z How to save power
CHAPTER
Managing Power 3-2
AC Adapter
CAUTION:
z The AC adapter is designed for use with your computer only. Connecting the AC
adapter to another device can damage the adapter.
z The AC power cord supplied with your computer is for use in the country where you
purchased your computer. If you plan to go overseas with the computer, consult
your dealer for the appropriate power cord.
z When you disconnect the AC adapter, disconnect from the electrical outlet first and
then from the computer. A reverse procedure may damage the AC adapter or
computer.
z When unplugging the connector, always hold the plug head. Never pull on the cord.
The AC adapter serves as a converter from AC (Alternating Current) to
DC (Direct Current) power because your computer runs on DC power,
but an electrical outlet usually provides AC power. It also charges the
battery pack when connected to AC power.
The adapter operates on any voltage in the range of 100~240 V AC.
Managing Power 3-3
Battery Pack
The battery pack is the internal power source for the computer. It is
rechargeable using the AC adapter.
The operating time of a fully charged battery pack depends on how you
are using the computer. When your applications often access peripherals,
you will experience a shorter operating time.
NOTE: Care and maintenance information for the battery is provided in the “Battery
Pack Guidelines” section in Chapter 7.
Charging the Battery Pack
NOTE:
z Charging will not start if the battery’s temperature is below 10 °C (50 °F) or above
30 °C (86 °F).
z The charging process will stop and the Battery Charge Indicator flashes amber
when the battery’s temperature gets above 60 °C (140 °F). If this happens, the
battery pack may be damaged. Please contact your dealer.
z During charging, do not disconnect the AC adapter before the battery has been fully
charged; otherwise you will get a prematurely charged battery.
To charge the battery pack, connect the AC adapter to the computer and
an electrical outlet. The Battery Charge Indicator ( ) on the computer
glows amber to indicate that charging is in progress. You are advised to
keep the computer power off while the battery is being charged. When the
battery is fully charged, the Battery Charge Indicator lights green.
The charging times are as follows:
Charging Time
Battery Type Computer is Off Computer is On and
in Idle State
6-cell (4 A) 2.5~3.5 hours 3.0~4.3 hours
9-cell (4 A) 3.5~4.5 hours 4.0~6.0 hours
Managing Power 3-4
CAUTION: After the computer has been fully recharged, do not immediately disconnect
and reconnect the AC adapter to charge it again. Doing so may damage the battery.
NOTE: The battery level may automatically lessen due to the self-discharge process
(0.21 % per day), even when the battery pack is fully charged (100 %). This happens no
matter if the battery pack is installed in the computer.
Initializing the Battery Pack
You need to initialize a new battery pack before using it for the first time
or when the actual operating time of a battery pack is much less than
expected.
Initializing is the process of fully charging, discharging, and then
charging. It can take several hours.
1. Make sure that the computer power is turned off. Connect the AC
adapter to fully charge the battery pack.
2. After the battery pack is fully charged, turn on the computer. When
the message “Click mouse or press <Enter> for Menu”
appears, click the touchpad’s left button or press the Enter key to
invoke the program.
3. A small window appears, select “Launch System Setup.”
4. Disconnect the AC adapter and leave the computer on until the
battery is fully discharged. The computer will shut down
automatically.
5. Connect the AC adapter to fully charge the battery pack.
Checking the Battery Level
NOTE: Any battery level indication is an estimated result. The actual operating time can
be different from the estimated time, depending on how you are using the computer.
Managing Power 3-5
By Operating System
You can check the approximate battery level using the battery meter
function of the operating system. To read the battery level in Windows,
click the icon on the system tray.
By Gas Gauge
On the exterior side of the battery pack is a gas gauge for displaying the
estimated battery charge. When the battery pack is not installed in the
computer and you want to know the battery charge, you can press the
switch with a pointed device to see the corresponding value of indicator
segment that light green. The value of the corresponding green segment
indicates the relative percentage of the battery charge. The battery pack is
fully discharged when you see no segment glowing green.
Replacing the Battery Pack
CAUTION:
z There is danger of explosion if the battery is incorrectly replaced. Replace the
battery only with the computer manufacturer’s optional battery packs. Discard used
batteries according to the dealer’s instructions.
z Do not attempt to disassemble the battery pack.
If you often rely on battery power for a long period of time while
traveling, you may consider the purchase of an additional battery pack
from your dealer and keep it with you in a fully charged state as a backup.
Switch
Managing Power 3-6
To replace the battery pack, follow these steps:
1. Make sure that the computer is not turned on or connected to AC
power.
2. Locate the battery compartment on the left side of the computer.
3. Open the compartment cover by sliding the release latch to the left
(n) then upwards (o).
4. Pull on the ribbon strip to remove the battery pack.
5. Slide the new battery pack all the way into the slot. Make sure to
observe the correct orientation (the ribbon strip must face outward for
future battery pack removal).
6. Close the compartment cover and slide the release latch downward,
then towards the right to secure the battery pack.
Installing a Second Battery Pack (Optional)
You can install a second battery pack to your computer for a longer
operating time when AC power is not available. To install a second
battery pack:
1. Make sure that system power is off.
Managing Power 3-7
2. Open the media bay cover by sliding the release latch towards the left.
3. Press upwards the optical drive release latch (n) and carefully pull on
the ribbon strip (o) to remove the optical drive.
4. Slide the second battery pack all the way into the slot. Make sure to
observe the correct orientation (the ribbon strip must face outward for
future battery pack removal).
5. Close the media bay cover to secure the second battery pack.
Managing Power 3-8
NOTE: To remove the second battery pack, press upwards the battery release latch
(n) and carefully pull on the ribbon strip (o) to remove the battery pack.
On the exterior side of the second battery pack is a gas gauge for
displaying the estimated battery charge. When the battery pack is not
installed in the computer and you want to know the battery charge, you
can press the switch with a pointed device to see the corresponding value
of indicator segment that light green. The value of the corresponding
green segment indicates the relative percentage of the battery charge. The
battery pack is fully discharged when you see no segment glowing green.
Switch
Managing Power 3-9
Battery Low Signals and Actions
The battery icon changes appearance to display the current state of the
battery so that you can see how much charge remains (Windows default
setting). When the battery charge is above 25 % the battery icon is green.
When the battery charge reaches 25 % a yellow triangle with an
exclamation point (!) appears above the green battery icon. When the
charge reaches the low battery level a red circle with a white “X” appears
above the green icon. The computer’s Battery Charge Indicator ( )
blinks red to alert you to take actions.
Immediately save your data upon Battery Low. The remaining operating
time depends on how you are using the computer. If you are using the
audio subsystem, ExpressCard, hard or USB flash disk, the battery might
run out of charge very quickly.
Always respond to Battery Low by placing your computer on Hibernation
mode, turning off the computer, or connecting the AC adapter.
CAUTION:
z If you are using a PC card, do not access the card during battery low periods. This
is because the access may take longer than the time it takes the battery to run out
of charge, thus making your access to the card unsuccessful.
z If you fail to save your data when the battery completely runs out of charge, then
you lose your data.
Managing Power 3-10
Power Management
Your computer supports ACPI (Advanced Configuration and Power
Interface) for power management. The power management feature allows
you to reduce the power consumption for energy saving.
With an ACPI-compliant operating system such as Windows Vista,
power supply to different computer components is controlled on an
as-needed basis. This allows maximum power conservation and
performance at the same time.
In general, Windows’ power management works in this way:
What... When...
Power to the hard disk is turned off When the hard disk has been idle for a
set period.
Power to the display is turned off When the display has been idle for a
set period.
When the entire system has been idle
for a set period.
When you press the Fn+F12 hot key. *
When you close the cover. *
The computer enters the Sleep mode.
The hard disk and display are turned
off and the entire system consumes
less power.
When you press the power button. *
When the entire system has been idle
for a set period
When you press the Fn+F12 hot key. *
When you close the cover. *
The computer enters the Hibernation
mode. (See the next subsection for
more information.)
When you press the power button. *
* Depends on your settings in Windows.
For detailed information on power management, see Windows’ Help.
Managing Power 3-11
Hibernation
NOTE: Make sure that the hibernation feature is enabled in the “When I press the
power button,” “When I press the sleep button,” and “When I close the lid” of the Power
Options Æ System Settings Properties from the Control Panel Æ Mobile PC in
Windows Vista.
Hibernation is a very useful feature. People frequently open many
applications when they use computers. It takes some time to get all these
applications open and running, and normally they all have to be closed
before the computer can be turned off.
When you use the hibernation feature, you do not have to close the
applications. The computer stores the state of your computer to a file on
the hard disk and then shuts down. The next time you turn on your
computer, you return to exactly where you left off.
Managing Power 3-12
Power-Saving Tips
Aside from enabling your computer’s power saving mode (see previous
section), you can do your part to maximize the battery’s operating time by
following these suggestions.
z Press the power saving quick button ( ) to enter into power
saving mode when using battery power.
z Do not disable Power Management. Choose a Windows power plan
that saves power. A power plan is a collection of hardware and
system settings that control how your computer manages power.
z Decrease the LCD brightness to the lowest comfortable level.
z Shorten the length of time before Windows turn off the display.
z Many USB devices use power just by being connected. If you use a
USB mouse, you can save power by disconnecting the mouse and
using the touchpad. If you use a USB flash drive, unplug it when you
are not using it.
z If you work with an application that uses a PC card, exit the
application when you finish using it.
z If you have a PC card installed, remove it when not in use. Some PC
cards drain power even while they are inactive.
z Deactivate the WLAN function if you are not using it
(see Chapter 2).
z Deactivate the Bluetooth feature if you are not using it
(see Chapter 2).
z Turn off the computer when you are not using it.
Expanding Your Computer 4-1
Chapter 4
Expanding Your Computer
You can expand the capabilities of your computer by connecting other
peripheral devices. When using a device, be sure to read the instructions
accompanying the device together with the relevant section in this
chapter.
This chapter gives guidelines on installing and using these devices:
z External monitor
z Serial device
z USB device
z IEEE 1394 device
z Smart Card
z PC card
z ExpressCard
z Card Reader
z Port Replicator
z System memory
CHAPTER
Expanding Your Computer 4-2
Connecting an External Monitor
If you want the benefits of a larger display screen with higher resolution,
you can connect an external display monitor to your computer. Follow
this procedure to connect an external monitor:
1. Make sure that the computer is not turned on.
2. Slide the release latch towards the right to open the connector cover.
3. Plug the monitor’s D-type signal connector to the computer’s VGA
connector.
4. Plug one end of the monitor’s power cord into the power socket on
the monitor and the other end to an electrical outlet.
5. To use the monitor, turn on the monitor before turning on the
computer.
6. The monitor should respond by default. If not, you can switch the
display to the monitor or to both (simultaneous display), or to
multi-display by pressing the Fn+F5 hot key. In Windows, you can
also change the display through the Display Settings Properties.
Expanding Your Computer 4-3
7. You can change display settings through your operating system. See
your operating system documentation or online help for specific
information.
CAUTION: Do not disconnect the external monitor while the computer is in the Sleep
mode or Hibernation mode. If no external monitor is connected when the computer
resumes, the LCD might not display properly.
Expanding Your Computer 4-4
Connecting a Serial Device
Your computer has two serial ports for connecting serial devices such as
serial mouse or serial communication device (modem).
Follow this procedure to connect a serial device:
1. Make sure the “Serial Port COM1/COM2” item is set properly in the
BIOS Setup program. (See “Advanced Menu” in Chapter 5 for
information.)
2. Make sure the computer is not turned on.
3. Slide the release latch towards the right to open the port cover.
4. Plug the device cable to the serial port on the rear of the computer.
5. Turn on the computer.
NOTE: Portable modems that derive power through the serial port cannot be used with
the computer. Instead, use a modem that is powered by its own internal battery or
external AC power.
Expanding Your Computer 4-5
Connecting a USB Device
Your computer has three USB ports for connecting USB devices, such as
a digital camera, scanner, printer, modem, and mouse.
The USB ports support transfer rates up to 12 MB/s for USB 1.1 devices
and 480 MB/s for USB 2.0 devices.
To connect a USB device, slide the release latch towards the right to open
the port cover and then simply plug the device cable to one of the USB
ports.
Expanding Your Computer 4-6
Connecting an IEEE 1394 Device
Your computer has a mini IEEE 1394 port for connecting IEEE 1394
devices that include not only computer peripheral devices such as
scanner, printer and high-quality CCD, but also consumer electronic
equipment such as DVCAM and VCR.
To connect an IEEE 1394 device, prepare an IEEE 1394 cable. Slide the
release latch towards the right to open the connector cover. Then plug the
appropriate end of the cable to the computer’s mini IEEE 1394 connector
and the other end to the device’s corresponding connector.
Expanding Your Computer 4-7
Using Smart Cards (Optional)
Depending on the model, your computer has a smart card slot for
additional security feature, providing tamper-proof storage of user and
account identity. A smart card is a type of plastic card embedded with a
computer chip that stores and transacts data between you (user) and the
computer.
You need to install third-party smart card software to take advantage of
the smart card feature.
Inserting and Removing a Smart Card
To insert a smart card:
1. Locate the smart card slot on the right of the computer and open the
cover.
2. Slide the smart card, with its label and embedded computer chip
facing down into the slot.
3. When a new card is seated, use the third-party smart card software to
allow your computer to read it.
Computer
Chip
Expanding Your Computer 4-8
To remove a smart card:
1. Make sure that the third-party smart card software is not accessing the
smart card.
2. Pull the card out of the slot.
Expanding Your Computer 4-9
Using PC Cards
Depending on your model, your computer has one or two PC card slots
which supports type II card and CardBus specifications.
Inserting and Removing a PC Card
NOTE:
z Some PC cards require additional system resources. Before using such PC card,
you may have to free other system resources for the PC card.
z Although some PC cards can be inserted and removed without turning off the
computer, you cannot remove or install PC cards during Sleep mode.
To insert a PC card:
1. Locate the PC card slot(s) on the right side of the computer and open
the cover.
2. Slide the PC card, with its label facing up, into the slot until the eject
button pops out.
3. When a new card is seated, the computer will detect it and try to
install the appropriate driver. Follow the on-screen instructions to
complete the process.
Eject button
Expanding Your Computer 4-10
To remove a PC card:
4. Double-click on the Safely Remove Hardware icon found on the
Windows Vista taskbar and the Safely Remove Hardware window
appears on screen.
5. Select (highlight) the PC card from the list to disable the card.
6. Push the eject button and the card will slide out slightly.
7. Pull the card out of the slot.
Expanding Your Computer 4-11
Using ExpressCards (Optional)
Depending on the model, your computer has an ExpressCard slot.
ExpressCard supports the PCI Express and USB 2.0 serial data interfaces
(supporting speeds of up to 2.5 Gbps and 480 Mbps respectively),
improving speed in data transfer while conserving power usage.
ExpressCard Type
The ExpressCard slot can accommodate a 54 mm (ExpressCard/54) or
34 mm (ExpressCard/34) wide ExpressCard. Typical ExpressCards
support a very extensive range of applications including memory, wired
and wireless communication cards, and security devices.
Shown next are the appearances of ExpressCards for your reference.
ExpressCard/54 ExpressCard/34
Inserting and Removing an ExpressCard
To insert an ExpressCard:
1. Locate the ExpressCard slot on the right side of the computer and
open the cover.
Expanding Your Computer 4-12
2. Slide the ExpressCard, with its label facing up, all the way into the
slot until the rear connectors click into place.
3. When a new card is seated, the computer will detect it and try to
install the appropriate driver. Follow the on-screen instructions to
complete the process.
To remove an ExpressCard:
1. Double-click on the Safely Remove Hardware icon found on the
Windows taskbar and the Safely Remove Hardware window appears
on screen.
2. Select (highlight) the ExpressCard from the list to disable the card.
3. Push the ExpressCard slightly to release the card.
4. Pull the card out of the slot.
Expanding Your Computer 4-13
Using the Card Reader
NOTE:
z If your hard disk is divided into several drives, make sure that all drives have been
formatted before using the Card Reader. Otherwise, you may encounter problems
when using the Card Reader.
z You can use only storage cards. Your Card Reader does not support cards with I/O
(input/output) functions such as a wireless network card or Bluetooth wireless card.
Your computer has a Card Reader. The Card Reader is a small drive for
reading from and writing to removable storage cards (or called memory
cards). The Card Reader supports the MultiMediaCard (MMC), Secure
Digital (SD), Memory Stick (MS), and Memory Stick PRO (MS PRO)
cards.
Shown next are the appearance and size of each card type for your
reference.
Type MMC Card SD Card MS / MS PRO Card
Appearance
Size 24×32×1.4
(mm)
24×32×2.1
(mm)
21.5×50×2.8
(mm)
To insert a storage card:
1. Locate the Card Reader slot on the right side of the computer and
open the cover.
Expanding Your Computer 4-14
2. Align the card with its connector pointing to the slot and its label
facing down. Slide the card into the slot until it reaches the end.
3. Windows will detect the card and assign it a drive name (typically E).
To remove a storage card:
1. Double-click My Computer.
2. Right-click the drive with the card and select Eject.
3. Pull the card out of the slot.
Expanding Your Computer 4-15
Using the Port Replicator (Optional)
A port replicator is available as an option. This device eliminates the
hassles of having you connect and disconnect the various cables when
carrying your computer around and allows a variety of peripherals to be
connected including a headphone or microphone, etc. The port replicator
connects to the expansion bus connector at the rear of your computer.
1. Slide open the expansion bus connector cover.
2. Connect your port replicator to the expansion bus connector ( ).
For more detailed information, refer to the Operating Instructions of the
port replicator.
CAUTION:
z Hot/warm docking and hot/warm undocking are not possible with the port replicator.
z Contact your dealer for the correct type of port replicator (docking input device) to
connect to the expansion bus connector of your computer.
Expanding Your Computer 4-16
System Memory Upgrade
You can upgrade your computer by changing system memory to a
maximum of 4 GB on the two 533/667 MHz DDRII SO-DIMM slots.
CAUTION: RAM modules are extremely sensitive to static electricity. There are cases
where static electricity generated by the human body has adversely affected such
modules. When inserting or removing a RAM module, do not touch the terminals or
internal components, insert objects other than the module, or allow foreign particles to
enter. Doing so has been known to cause damage, fire, or electrical shock.
To install the RAM module:
1. Remove the battery pack (see chapter 3) and make sure that the
computer is not connected to AC power.
2. Carefully place the computer upside down.
3. Remove the six screws to open the compartment cover.
Expanding Your Computer 4-17
4. To install the RAM module, match the module's notched part with the
socket's projected part and firmly insert the module into the socket at
a 20-degree angle.
5. Then push down until the retaining clips lock the module into
position.
CAUTION: If the RAM module is difficult to insert or difficult to push down, do not force
it. Check once more to ensure that the module is positioned correctly.
6. Close the compartment cover and secure with six screws.
Using BIOS Setup 5-1
Chapter 5
Using BIOS Setup
BIOS Setup Utility is a program for configuring the BIOS (Basic Input/
Output System) settings of the computer.
BIOS is a layer of software, called firmware, that translates instructions
from other layers of software into instructions that the computer hardware
can understand. The BIOS settings are needed by your computer to
identify the types of installed devices and establish special features.
This chapter tells you how to use the BIOS Setup program.
CHAPTER
Using BIOS Setup 5-2
When and How to Use BIOS Setup
When to Use
You need to run BIOS Setup Utility when:
z You see an error message on the screen requesting you to run BIOS
Setup Utility.
z You want to restore the factory default settings.
z You want to modify some specific settings according to the hardware.
z You want to modify some specific settings to optimize the system
performance.
Starting BIOS Setup
NOTE:
z The BIOS Setup Utility screens shown in this chapter are for your reference only.
The actual items or settings on your computer may differ.
z The BIOS Setup Utility program may have been updated after the publication of this
manual.
z The settings you select in your operating system might override similar settings in
BIOS Setup Utility.
To run BIOS Setup Utility, press the Enter key or click the left touchpad
button when the prompt appears on the screen during system startup. The
prompt shows up on the screen for only a few seconds. You must press
the Enter key or click the left touchpad button quickly. A small window
appears, select Launch System Setup. The BIOS Setup Utility main
screen appears as shown next.
Using BIOS Setup 5-3
The BIOS Setup Utility screen can be divided into four areas:
z On the top is the menu bar containing the titles of the available
menus. Each menu title brings a specific menu.
z The left column of the menu displays the menu items.
z The right column of the menu provides more detailed information
when a menu item is highlighted.
z The bottom of the menu provides keyboard instructions for moving
around and making selections.
Using BIOS Setup 5-4
Moving Around and Making Selections
You must go through two or three levels to complete the setting for an
item. In most cases, there are two levels: menu title and submenu.
Use the keyboard to move around and make selections. Keyboard
information can be found at the bottom of the screen. A brief description
of keyboard usage is listed next:
Key Function
← , → Selects a menu title.
↑ , ↓ Selects an item or option.
+ / – Changes the value.
Enter 1) Brings up the sub-menu when available.
2) Opens or closes the option window when an item is selected.
Esc 1) Exits BIOS Setup Utility.
2) Closes the option window if one is open.
F1 Provides help information.
F9 Loads setup defaults.
F10 Saves and exit the BIOS Setup Utility.
Using BIOS Setup 5-5
Information Menu
The Information menu contains the basic configuration information of the
system.
Using BIOS Setup 5-6
Main Menu
The Main menu contains the system date and time, as well as USB and
wireless LAN settings of the system.
System Time sets the system time.
System Date sets the system date.
Legacy USB Support enables or disables the system’s support for
Legacy USB device in DOS mode.
Wireless LAN setting this item to Off will start the system with wireless
radio off, On will start the system with the wireless radio on, and Last
State will start the system based on the state of wireless radio during your
last power off.
Using BIOS Setup 5-7
Advanced Menu
The Advanced menu contains the advanced settings as shown next.
P1 Function allows you to specify the P1 quick button function. When
set at Blackout the P1 quick button allows you to turn off the LCD
backlight and LED indicator. When set at Quick Btn the P1 quick button
functions as a user customized quick launch key.
CD/DVD Auto Power Control allows you to enable the optical drive’s
automatic power control when using battery power.
NIC Auto Power Control allows you to enable the NIC’s (network
interface controller) automatic power control when using battery power.
Azalia Modem PME Enable allows you to wake up the system via an
Azalia modem.
USB Wake-up From S3 allows the system to wake-up from Sleep mode
via USB device. When set at Disabled only the power button can wake-up
the system from Sleep mode.
SATA HDD Mode when set at Compatible and connecting a SATA
(serial ATA) hard drive is set as Primary on SATA controller in Legacy
mode. When connecting a PATA (parallel ATA) hard drive is set as
Secondary on SATA controller in Legacy mode.
Using BIOS Setup 5-8
When set at Enhanced and connecting a SATA hard drive is set as
Primary on SATA controller in Native mode. When connecting a PATA
hard drive is set as Primary on PATA controller in Legacy mode.
AHCI Configuration enables support for AHCI (Advanced Host
Controller Interface) Native command queuing and Link Power
Management. Requires Windows XP Service Pack 1 + IAA driver or
newer operating system. This item will not appear if the above item
“SATA HDD Mode” is set at Compatible.
Serial Port COM1 when enabled the serial port COM1 is configured at
3F8h, IRQ4.
Serial Port COM2 when enabled the serial port COM2 is configured at
2F8h, IRQ3.
Using BIOS Setup 5-9
Security Menu
The Security menu contains the TPM (Trusted Platform Module) setting.
TPM is a component on your computer’s mainboard that is specifically
designed to enhance platform security above-and-beyond the capabilities
of today’s software by providing a protected space for key operations and
other security critical tasks. Using both hardware and software, TPM
protects encryption and signature keys at their most vulnerable stages –
operations when the keys are being used unencrypted in plain-text form.
TPM is specifically designed to shield unencrypted keys and platform
authentication information from software-based attacks.
Upon pressing Enter, the following screen appears.
Using BIOS Setup 5-10
TPM Support enables or disables TPM support (see chapter 6 for
details).
Current TPM State shows the current TPM state.
Change TPM State allows you to select between No Change,
Clear, Deactivate & Disable, and Enable & Activate.
Using BIOS Setup 5-11
Boot Menu
The Boot menu sets the sequence of the devices to be searched for the
operating system.
The bootable devices will be automatically detected during POST and
shown here, allowing you to set the sequence that the BIOS uses to look
for a boot device from which to load the operating system. A brief
description of keyboard usage is listed next:
Key Function
↑ , ↓ Selects (highlight) a boot device.
+, – Changes the boot sequence.
1 to 4 Loads the default boot sequence.
f or r Specifies if the boot device is fixed (f) or removable (r).
X Moves the highlighted boot device from the “Boot priority order”
list to the “Excluded from boot order” list, and vice versa.
Shift + 1 Enables or disables a boot device.
Using BIOS Setup 5-12
Exit Menu
The Exit menu displays ways of exiting BIOS Setup Utility. After
finishing with your settings, you must save and exit so that the changes
can take effect.
Exit Saving Changes saves the changes you have made and exits BIOS
Setup Utility.
Exit Discarding Changes exits BIOS Setup Utility without saving the
changes you have made.
Load Setup Defaults loads the factory default values for all the items.
Discard Changes restores the previous values for all the items.
Saves Changes saves the changes you have made.
Using BIOS Setup 5-13
When and How to Use the System Recovery
Feature
When to Use
You need to run System Recovery when:
z Your computer does not start correctly.
z Your Windows operating system does not start at all.
z You want to restore the factory default Windows settings.
Starting System Recovery
To run System Recovery:
1. During system startup when the following screen appears, press Ctrl +
Alt + F2 keys for four seconds or press Enter and select HDI Recovery
when a small window appears on the screen.
Using BIOS Setup 5-14
2. The message This will help you reinstall Windows to the whole
HDD to factory default. All data on HDD will be lost appears
on the screen to ask if you want to access System Recovery. Type 1 to
continue or type 0 to exit.
3. A warning message appears as follows:
****************************************
You must accept the following terms before performing the
recovery process:
1. The recovery software is solely the purpose of
reinstalling or restoring software associated with the hard
disk of this operating GETAC machine.
2. Except the above, no other use is granted hereunder.
****************************************
(1)Yes, I agree to the provisions of this agreement and wish
to continue.
(0)No, I do not agree to the provisions of this agreement
and do not wish to continue.
Type 1 to continue.
4. Type 1 again when the message Are you sure you want to recover
now? (1)Yes (0)No appears onscreen. The following screen appears:
Using BIOS Setup 5-15
5. Your system will start the recovery process and Windows operating
system will be re-installed to its default setting.
Using the TPM and P1 Utility 6-1
Chapter 6
Using the TPM and P1 Utility
Your computer comes with an added security feature known as the TPM
(Trusted Platform Module) – a component on your computer’s mainboard
that is specifically designed to enhance platform security
above-and-beyond the capabilities of today’s software by providing a
protected space for key operations and other security critical tasks.
Also, located on top of your keyboard is the P1 quick launch key. The
quick launch key utility allows you to re-define (customize) the P1 quick
launch key according to your needs.
This chapter describes how to use these utilities.
CHAPTER
Using the TPM and P1 Utility 6-2
Using TPM (Trusted Platform Module)
TPM is a hardware-based security feature that can be used to create and
manage computer-generated digital certificates. When combined with
security software, the TPM enhances existing network and computer
security by enabling features such as file protection capabilities and
protected e-mail.
NOTE:
z Make sure you select Enable on the TPM Support item under the Security menu
of your BIOS Setup (see chapter 5 for details).
z Make sure you select Enable & Activate on the Change TPM State item under the
Security menu of your BIOS Setup (see chapter 5 for details).
z You only need to activate these items once.
You can use the certificates to:
z Send and receive secure email from email clients like Microsoft
Windows Mail/Outlook Express, Microsoft Outlook or Netscape
Messenger
z Set up browser (e.g. Netscape Navigator or Internet Explorer) and
web server (e.g. Microsoft Internet Information Server) for Client
Authentication
z Sign Microsoft Word macros
z Encrypt files and folders
z Secure network connections
NOTE: For information on using the program and the different security features, click
Start Æ All Programs Æ Infineon Security Platform Solution Æ Help.
Using the TPM and P1 Utility 6-3
P1 Quick Launch Key Utility
If you select Quick Btn in BIOS Setup program on the P1 Function item
under the Advanced menu (see chapter 5 for details), you can use the
quick launch key utility that allows you to define the P1 quick launch key.
To start the utility, right-click the GeTAC utility icon ( ) and select
Quick Buttons Definition on the Windows system tray. The Quick Button
Definition window appears as shown next.
Box
Cancel
Open
Using the TPM and P1 Utility 6-4
Defining the buttons:
The box in the window represents the user-definable button.
To assign a program to a button, click the Open icon to pop up the
Select a File to Open dialog box as shown next and select the desired
program. Then, click Open to complete the process.
The appropriate icon will then appear in the box. To launch the program,
press the P1 quick launch key, or, if the Quick Button Definition window is
open, click the box containing the icon.
Caring for the Computer 7-1
Chapter 7
Caring for the Computer
Taking good care of your computer will ensure a trouble-free operation
and reduce the risk of damage to your computer.
This chapter gives you guidelines covering these areas of maintenance:
z How to protect the computer
z What to note when using and storing the computer
z How to clean the computer
z What to note when using the battery pack
z What to note when traveling with the computer
CHAPTER
Caring for the Computer 7-2
Protecting the Computer
To safeguard the integrity of your computer data as well as the computer
itself, you can protect the computer in several ways as described in this
section.
Using the Windows Security Center
Windows Security Center protects your computer against intrusion.
Caring for the Computer 7-3
Windows Security Center alerts you to take action on the following
security essentials:
z Windows Firewall
z Windows Update
z Malware Protection (anti-virus, anti-spyware)
z Others (Internet security, user account control)
For detailed information on Windows Security Center, see Windows’
Help.
Using the Cable Lock
You can use a Kensington-type cable lock to protect your computer
against theft. The cable lock is available in most computer stores.
To use the lock, loop the lock cable around a stationary object such as a
table. Insert the lock to the Kensington lock hole and turn the key to
secure the lock. Store the key in a safe place.
Caring for the Computer 7-4
Taking Care of the Computer
Location Guidelines
z For optimal performance, use the computer where the recommended
temperature is between 0 °C (32 °F) and 55 °C (131 °F) – actual
operating temperature depending on product specifications.
z Avoid placing the computer in a location subject to high humidity,
extreme temperatures, mechanical vibration, direct sunlight, or heavy
dust.
z Do not cover or block any ventilation openings on the computer. For
example, do not place the computer on a bed, sofa, rug, or other
similar surface. Otherwise, overheating may occur that results in
damage to the computer.
z Keep the computer at least 13 cm (5 inches) away from electrical
appliances that can generate a strong magnetic field such as a TV,
refrigerator, motor, or a large audio speaker.
z Avoid moving the computer abruptly from a cold to a warm place. A
temperature difference of more than 10 °C (18 °F) may cause
condensation inside the unit, which may damage the storage media.
z Do not place the computer on an unsteady surface.
General Guidelines
z Do not place heavy objects on top of the computer when it is closed as
this may damage the display.
z The screen surface is easily scratched. Do not use paper towels to
clean the display but use the included soft cloth. Avoid touching it
with your fingers, pen, or pencil.
z To maximize the life of the backlight in the display, allow the
backlight to automatically turn off as a result of power management.
Avoid using a screen saver or other software that prevents the power
management from working.
Caring for the Computer 7-5
Cleaning Guidelines
z Never clean the computer with its power on.
z Use a soft cloth moistened with water or a non-alkaline detergent to
wipe the exterior of the computer.
z Gently wipe the display with a soft, lint-free cloth. Do not use alcohol
or detergent on the display.
z Dust or grease on the touchpad can affect its sensitivity. Clean the pad
by using adhesive tape to remove the dust and grease on its surface.
Battery Pack Guidelines
z Recharge the battery pack when it is nearly discharged. When
recharging, make sure that the battery pack is fully charged. Doing so
may avoid harm to the battery pack.
z The battery pack is a consumable product and the following
conditions will shorten its life:
– when frequently charging the battery pack
– when using, charging, or storing the battery in high temperature
condition
z To avoid hastening the deterioration of the battery pack thereby
prolonging its useful life, minimize the number of times you charge it
so as not to frequently increase its internal temperature.
z Charge the battery pack between 10 oC ~ 30 oC (50 oF ~ 86 oF)
temperature range.
A higher environment temperature will cause the battery pack’s
temperature to rise. Avoid charging the battery pack inside a closed
vehicle and in hot weather condition.
Also, charging will not start if the battery pack is not within the
allowed temperature range.
z It is recommended that you do not charge the battery pack more than
once a day.
Caring for the Computer 7-6
z It is recommended that you charge the battery pack with the
computer’s power off.
z To maintain the battery pack’s operating efficiency, store it in a cool
dark place removed from the computer and with 30 % ~ 40 % charge
remaining.
z Important guidelines when using the battery pack.
When installing or removing the battery pack take note of the
following:
– avoid installing or removing the battery pack when the computer is
in Sleep mode. Abruptly removing the battery pack may cause loss
of data or the computer may become unstable.
– avoid touching the battery pack terminals or damage may occur,
thereby causing improper operation to it or the computer.
The computer’s input voltage and surrounding temperature will
directly affect the battery pack’s charge and discharge time:
– charging time will be prolonged when the computer is turned on.
To shorten the charging time, it is recommended that you place the
computer in sleep or hibernation mode.
– a low temperature will prolong the charging time as well as hasten
the discharge time.
Touchscreen Guidelines
z Use the finger or the included touchscreen pen on the display. Using a
sharp or metallic object other than your finger or touchscreen pen
may cause scratches and damage the display, thereby causing errors.
z Avoid using excessive force that may cause damage to the display.
z Use a soft cloth to remove dirt on the display. The touchscreen
surface has a special protective coating that prevents dirt from
sticking to it. Not using a soft cloth may cause damage to the special
protective coating on the touchscreen surface.
To remove hard to remove dirt, blow some steam on the particular
area and gently wipe away using a soft cloth.
Caring for the Computer 7-7
z Turn off the computer power when cleaning the display. Cleaning the
display with the power on may cause improper operation.
z Use the touchscreen within the intended area only. The display area
and touchscreen operating area is the same. Using it beyond the
allowed area may cause damage to the display and result in improper
operation.
z Do not use excessive force on the display. Avoid moving the
computer while holding the display or twisting the display. Avoid
placing objects on top of the display as this may cause the glass to
break thereby damaging the display.
z Using the touchscreen during low temperature (less than 5 oC) may
cause a slower response time, this is normal. A normal response time
may be restored upon returning to room temperature.
z When there is noticeable discrepancy in the operation of the
touchscreen function (wrong location on intended operation or
improper display resolution), refer to the Windows online Help for
instructions on recalibrating the touchscreen display.
Caring for the Computer 7-8
When Traveling
z Before traveling with your computer, make a backup of your hard
disk data into flash disks or other storage devices. As an added
precaution, bring along an extra copy of your important data.
z Make sure that the battery pack is fully charged.
z Make sure that the computer is turned off and the top cover is
securely closed.
z Do not leave objects in between the keyboard and closed display.
z Disconnect the AC adapter from the computer and take it with you.
Use the AC adapter as the power source and as a battery-charger.
z Hand-carry the computer. Do not check it in as luggage.
z If you need to leave the computer in the car, put it in the trunk of the
car to avoid exposing the computer to excessive heat.
z When going through airport security, it is recommended that you
send the computer and flash disks through the X-ray machine (the
device you set your bags on). Avoid the magnetic detector (the device
you walk through) or the magnetic wand (the handheld device used
by security personnel).
z If you plan to travel abroad with your computer, consult your dealer
for the appropriate AC power cord for use in your country of
destination.
Troubleshooting 8-1
Chapter 8
Troubleshooting
Computer problems can be caused by hardware, software, or both. When
you encounter any problem, it might be a typical problem that can easily
be solved.
This chapter tells you what actions to take when solving common
computer problems. It is divided into three sections:
z Preliminary checklist
z Solving common problems
z Resetting the computer
CHAPTER
Troubleshooting 8-2
Preliminary Checklist
Here are helpful hints to follow before you take further actions when you
encounter any problem:
z Try to isolate which part of the computer is causing the problem.
z Make sure that you turn on all peripheral devices before turning on
the computer.
z If an external device has a problem, make sure that the cable
connections are correct and secure.
z Make sure that the configuration information is properly set in the
BIOS Setup program.
z Make sure that all the device drivers are correctly installed.
z Make notes of your observations. Are there any messages on the
screen? Do any indicators light? Do you hear any beeps? Detailed
descriptions are useful to the service personnel when you need to
consult one for assistance.
If any problem persists after you follow the instructions in this chapter,
contact an authorized dealer for help.
Troubleshooting 8-3
Solving Common Problems
For easy reference, the problems are divided into these categories.
Problem Type Go to
Battery Problems P. 8-4
Bluetooth Wireless Transmission Problems P. 8-4
Display Problems P. 8-5
ExpressCard Problems P. 8-6
Hardware Device Problems P. 8-6
Hard Disk Drive Problems P. 8-7
Keyboard, Mouse, and Touchpad Problems P. 8-7
LAN Problems P. 8-8
WLAN Problems P. 8-8
Modem Problems P. 8-8
Optical Drive Problems P. 8-10
PC Card Problems P. 8-10
Power Management Problems P. 8-10
Software Problems P. 8-13
Sound Problems P. 8-13
Startup Problems P. 8-14
Other Problems P. 8-14
Troubleshooting 8-4
Battery Problems
The battery does not charge (Battery Charge indicator does not light
amber).
z Make sure that the AC adapter is properly connected.
z Make sure that the battery is not too hot or cold. Allow time for the
battery pack to return to room temperature.
z Make sure that the battery pack is installed correctly.
z Make sure that the battery terminals are clean.
The operating time of a fully charged battery becomes shorter.
z If you often partially recharge and discharge, the battery might not be
charged to its full potential. Initialize the battery to solve the problem.
(See “Initializing the Battery Pack” in Chapter 3 for instructions.)
The battery operating time indicated by the battery meter does not
match the actual operating time.
z The actual operating time can be different from the estimated time,
depending on how you are using the computer. If the actual operating
time is much less than the estimated time, initialize the battery. (See
“Initializing the Battery Pack” in Chapter 3 for instructions.)
Bluetooth Wireless Transmission Problems
I cannot connect to another device with Bluetooth wireless
technology.
z Make sure that the Bluetooth wireless card is correctly installed.
z Make sure that both devices have activated Bluetooth feature.
z Make sure that the distance between the two devices are not over 10
meters or that there are no walls or other obstructions between the
devices.
z Make sure that the other device is not in “Hidden” mode.
Troubleshooting 8-5
z Make sure that both devices are compatible.
Display Problems
Nothing appears on the screen.
z During operation, the screen may automatically turn off as a result of
power management. Press any key to see if the screen comes back.
z The brightness level might be too low. Increase brightness by
pressing the Fn+F7 hot key.
z The display output might be set to an external device. To switch the
display back to the LCD, press the Fn+F5 hot key or change the
display through the Display Settings Properties.
The characters on the screen are dim.
z Adjust the brightness and/or contrast.
Bad dots appear on the display at all times.
z A small number of missing, discolored, or bright dots on the screen
are an intrinsic characteristic of TFT LCD technology. It is not
regarded as a LCD defect.
The external monitor displays nothing.
z Make sure that the monitor is turned on.
z Make sure that the monitor’s signal cable is properly connected.
z Switch the display to the monitor by pressing the Fn+F5 hot key or
change the display through the Display Settings Properties.
Simultaneous display/multi-display does not work.
z Make sure that you turn on the external monitor before turning on the
computer.
z Press the Fn+F5 hot key to toggle through the display options or
change the Display Settings Properties in Windows.
Troubleshooting 8-6
ExpressCard Problems
The ExpressCard does not work.
z Make sure that the ExpressCard is correctly seated.
z If the card requires an IRQ (Interrupt ReQuest), make sure that there
is one available.
The ExpressCard stops communicating properly.
z The application may have been reset when the computer is turned off
or in Sleep mode. Exit and restart the application.
Hardware Device Problems
The computer does not recognize a newly installed device.
z The device may not be correctly configured in the BIOS Setup
program. Run the BIOS Setup program to identify the new type.
z Make sure if any device driver needs to be installed. (Refer to the
documentation that came with the device.)
z Make sure if the device needs any jumper or switch settings. (Refer to
the documentation that came with the device.)
z Check the cables or power cords for correct connections.
z For an external device that has its own power switch, make sure that
the power is turned on.
Hard Disk Drive Problems
The hard disk drive error message appears on the screen.
z The hard disk drive has defects. Ask your dealer for help.
The hard disk drive operations seem slow.
z The data files stored on the hard disk drive may be fragmented. Use a
tool such as Window’s Disk Defragmenter to defragment the files.
Troubleshooting 8-7
The hard disk drive in-use indicator glows without blinking.
z The data files stored on the hard disk drive may be fragmented. Use a
tool such as Window’s Disk Defragmenter to defragment the files.
Keyboard, Mouse, and Touchpad Problems
The keyboard does not respond.
z Try connecting an external keyboard. If it works, contact an
authorized dealer, as the internal keyboard cable might be loose.
The numeric keypad is disabled.
z Make sure that the Num Lock is switched on. (Check if the Num Lock
Indicator glows or not.)
The external keyboard does not work.
z Make sure that the keyboard cable is properly connected.
The USB mouse does not work.
z Make sure that the mouse cable is properly connected.
The touchpad does not work, or the pointer is difficult to control
with the touchpad.
z Make sure that the touchpad is clean.
LAN Problems
I cannot access the network.
z Make sure that the LAN cable is properly connected to the RJ-45
connector and the network hub.
z Make sure that the network configuration is appropriate.
z Make sure that the user name or password is correct.
Troubleshooting 8-8
WLAN Problems
I cannot use the WLAN feature.
z Make sure that the mini PCI-E WLAN card is correctly installed.
z Make sure that the WLAN feature is turned on.
Transmission quality is poor.
z Your computer may be in an out-of-range situation. Move your
computer closer to the Access Point or another WLAN device it is
associated with.
z Check if there is high interference around the environment and solve
the problem as described next.
Radio interference exists.
z Move your computer away from the device causing the radio
interference such as microwave oven and large metal objects.
z Plug your computer into an outlet on a different branch circuit from
that used by the affecting device.
z Consult your dealer or an experienced radio technician for help.
I cannot connect to another WLAN device.
z Make sure that the WLAN feature is turned on.
z Make sure that the SSID setting is the same for every WLAN device
in the network.
z Your computer is not recognizing changes. Restart the computer.
z Make sure that the IP address or subnet mask setting is correct.
I cannot communicate with the computer in the network when
Infrastructure mode is configured.
z Make sure that the Access Point your computer is associated with is
powered on and all the LEDs are working properly.
Troubleshooting 8-9
z If the operating radio channel is in poor quality, change the Access
Point and all the wireless station(s) within the BSSID to another radio
channel.
z Your computer may be in an out-of-range situation. Move your
computer closer to the Access Point it is associated with.
z Make sure that your computer is configured with the same security
option (encryption) to the Access Point.
z Use the Web Manager/Telnet of the Access Point to check whether it
is connected to the network.
z Reconfigure and reset the Access Point.
I cannot access the network.
z Make sure that the network configuration is appropriate.
z Make sure that the user name or password is correct.
z You have moved out of range of the network.
z Turn off power management.
Modem Problems
The modem does not work.
z Make sure that the telephone line is properly connected.
z Make sure that the COM port in the communication software is
correctly set.
z Turn off power management.
Optical Drive Problems
The optical drive cannot read a disc.
z Make sure that the disc is correctly seated in the tray, with the label
facing up.
Troubleshooting 8-10
z Make sure that the disc is not dirty. Clean the disc with a disc
cleaning kit, available in most computer stores.
z Make sure that the computer supports the disc or the files contained.
You cannot eject a disc.
z The disc is not properly seated in the drive. Manually release the disc
following the method described next:
1. Turn off the computer.
2. Open the media bay cover by sliding the release latch towards the
left.
3. Insert a small rod, such as a straightened paperclip, into the
drive’s manual eject hole and push firmly to release the tray.
4. Pull the tray out until fully extended, and then remove the disc.
PC Card Problems
The PC card does not work.
z Make sure that the PC card is correctly seated.
Troubleshooting 8-11
z If the card requires an IRQ (Interrupt ReQuest), make sure that there
is one available.
The PC card stops communicating properly.
z The application may have been reset when the computer is turned off
or in Sleep mode. Exit and restart the application.
Power Management Problems
The computer does not enter Sleep or Hibernation mode
automatically.
z If you have a connection to another computer, the computer does not
enter Sleep or Hibernation mode if the connection is actively in use.
z Make sure that the Sleep or Hibernation time-out is enabled.
The computer does not enter Sleep or Hibernation mode
immediately.
z If the computer is performing an operation, it normally waits for the
operation to finish.
The computer does not resume from Sleep or Hibernation mode.
z The computer automatically enters Sleep or Hibernation mode when
the battery pack is empty. Do any one of the following:
− Connect the AC adapter to the computer.
− Replace the empty battery pack with a fully charged one.
The computer does not enter Hibernation mode with the Fn+F12 hot
keys.
z Make sure that the Hibernation function is specified for the sleep
button.
z You might be using a PC card that prevents the computer from
entering Hibernation mode. To enter the mode, stop the
communication program and then remove the card or stop the card.
Troubleshooting 8-12
Software Problems
An application program does not work correctly.
z Make sure that the software is correctly installed.
z If an error message appears on the screen, consult the software
program’s documentation for further information.
z If you are sure the operation has stop, reset the computer. (See
“Resetting the Computer” later in this chapter.)
Sound Problems
No sound is produced.
z Make sure that the volume control is not set too low.
z Make sure that the computer is not in Sleep mode.
z If using an external speaker, make sure that the speaker is properly
connected.
Distorted sound is produced.
z Make sure that the volume control is not set too high or too low. In
most cases, a high setting can cause the audio electronics to distort the
sound.
The sound system does not record.
z Adjust the playback or recording sound levels.
The external microphone or audio device does not work.
z Make sure that the microphone is connected to the proper connector
on the computer.
z Click the speaker symbol on the taskbar and check the Windows
volume control.
z Check the volume control of your computer.
Troubleshooting 8-13
Startup Problems
When you turn on the computer, it does not respond and the Power
Indicator does not light green.
z If you are using an external AC power, make sure that the AC adapter
is correctly and securely connected. If so, make sure that the electrical
outlet works properly.
z If you are using the battery power, make sure that the battery is not
discharged.
When you turn on the computer, it stops after POST.
z Restart your computer.
Other Problems
The date/time is incorrect.
z Correct the date and time via the operating system or BIOS Setup
program.
z After you have performed everything as described above and still
have the incorrect date and time every time you turn on the computer,
the RTC (Real-Time Clock) battery is at the end of its life. Call an
authorized dealer to replace the RTC battery.
Troubleshooting 8-14
Resetting the Computer
You may have to reset (reboot) your computer on some occasions when
an error occurs and the program you are using hangs up.
If the computer operation seems to hang up, first wait. It is possible that
the computer is processing data. Periodically check the hard disk drive
in-use indicator, if it flashes irregularly, the program may be accessing
data and preventing you from using the keyboard. If you are sure the
operation has stopped and you cannot use the “restart” function of the
operating system, reset the computer.
Reset the computer by any one of these methods:
z Press Ctrl+Alt+Del on your built-in keyboard.
z If the above action does not work, turn off the computer. Wait for at
least five seconds and turn it on again.
CAUTION: Resetting will cause any unsaved data to be lost.
Specifications A-1
Appendix A
Specifications
NOTE: Specifications are subject to change without any prior notice.
Parts Specifications
CPU Intel® Core™ 2 Duo Merom processor LV L7300/LV7500
800 MHz FSB (Front Side Bus), 1.4/1.6 GHz, 4 MB L2 cache
thermal specifications 17 W
NorthBridge Intel® GM965, dual channel support Chipset
SouthBridge Intel® ICH8M
BIOS 1 MB EEPROM, ACPI, fingerprint / smart card security, TPM
RAM (system) Up to 4 GB DDRII 533/667 MHz, 2 × 200-pin SO-DIMM sockets
1.25-inch height
Panel 13.3-inch (4:3) wide TFT LCD, resolution up to 1024×768 XGA
with touchscreen (option), or
with sunlight-readable over 1200 nits (option), or
with sunlight-readable and touchscreen 1000 nits (option), or
with protective film (option)
Video controller UMA
VRAM Up to 384 MB (depends on BIOS setting)
Display
Video port Analog VGA
Features Azalia interface, 2 channel analog output, internal microphone
Speaker 1.5 watt (8 ohm) stereo × 2
Audio
Ports Two audio ports for Line-out (green color) / Mic-in (pink color)
Keyboard Standard keys with numeric pad keys, 12 function keys, special Fn
(Function) key and Windows keys
with water-proof membrane or backlight (option)
Pointing device Glide touchpad with 2 buttons, scroll bar
APPENDIX
Specifications A-2
Parts Specifications
Hard disk drive SATA interface, 2.5-inch diameter (9.5 mm height), 5400 rpm support,
G-sensor, shock-mounted, user-removable,
solid-state disk (option), automotive hard disk drive (option),
low temperature – 4 oF (– 20 oC) up to 131 oF (55 oC) (option)
Storage device
Optical drive DVD Combo / DVD Dual / Super-Multi
Card slots Card Reader 4-in-1 (MMC/SD/MS/MS PRO card) module
PCMCIA CardBus Type II × 2 or 1 with any of the following:
ExpressCard/34 / ExpressCard/54 support, or
Smart Card
I/O ports USB ports × 3 (USB 2.0 support), serial port × 2 (RS-232), RJ-45 port,
RJ-11 port, mini IEEE 1394a port, expansion bus connector
Modem Azalia interface, 56 Kbps, V.90 MDC 1.5 internal fax modem
LAN 10/100/1000 Mbps
Wireless LAN One mini PCI-E slot for wireless LAN card, compliant with
IEEE 802.11a/b/g/n, on/off slide switch
Bluetooth wireless technology
(option)
Specification 2.0 module, on/off slide switch
GPS (option) GPS module
Security Kensington lock
TPM 1.2
Fingerprint sensor
Smart Card Reader (integrated) will occupy Type II PCMCIA slot –
option
AC adapter Universal AC adapter 90 W; input: 100∼240 V, output: 19 V
Primary
battery
Li-ion smart battery 9-cell 7650 mAH / 11.1 V or above
Power
Secondary
battery
Li-ion smart battery 9-cell 7650 mAH / 11.1 V or above
Dimension (W×D) 303.5×298×60 mm (11.9×11.7×2.36 inch) with handle
Weight 3.5 kg (7.7 lb)
Regulatory Information B-1
Appendix B
Regulatory Information
This appendix provides regulatory statements and safety notices on your
computer.
NOTE: Marking labels located on the exterior of your computer indicate the regulations
that your model complies with. Please check the marking labels and refer to the
corresponding statements in this appendix. Some notices apply to specific models only.
APPENDIX
Regulatory Information B-2
On the Use of the System
Class B Regulations
USA
Federal Communications Commission Radio Frequency
Interference Statement
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
z Reorient or relocate the receiving antenna.
z Increase the separation between the equipment and receiver.
z Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
z Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
Please note:
The use of a non-shielded interface cable with this equipment is
prohibited.
Regulatory Information B-3
Canada
Canadian Department of Communications
Radio Interference Regulations Class B Compliance Notice
This Class B digital apparatus meets all requirements of the Canada
Interference-Causing equipment regulations.
Cet appareil numérique de Classe B respecte toutes les exigences du
Règlement Canadien sur le matériel brouileur.
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques de la classe B
prescrites dans le Règlement sur le brouillage radioélectrique édicté par le
ministère des Communications du Canada.
Safety Notices
About the Battery
Caution Texts Concerning Lithium Batteries
DANISH
ADVARSEL! Lithiumbatteri – Eksplosionsfare ved fejlagtig håndtering. Udskiftning må
kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til
leverandøren.
NORWEGIAN
ADVARSEL: Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype
eller en tilsvarende type anbefalt av apparatfabrikanten. Brukte batterier kasseres i
henhold til fabrikantens instruksjoner.
SWEDISH
VARNING: Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en
ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt batteri enligt
fabrikantens instruktion.
FINNISH
VAROITUS: Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo
ainoastaan valmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan
ohjeiden mukaisesti.
Regulatory Information B-4
ENGLISH
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the equipment manufacturer. Discard used
batteries according to manufacturer's instructions.
DEUTSCH
VORSICHT: Explosionsgefahr bei unsachgemäßem Austausch der Batterie. Ersatz nur
durch denselben oder einen vom Hersteller empfohlenen gleich-wertigen Typ.
Entsorgung gebrauchter Batterien nach Angaben des Herstellers.
FRENCH
ATTENTION: II y a danger d’explosion s’il y a remplacement incorrect de la batterie.
Remplacer uniquement avec une batterie du même type ou d’un type équivalent
recommandé par le constructeur. Mettre au rebut les batteries usagées conformément aux
instructions du fabricant.
Attention (for USA Users)
The product that you have purchased contains a rechargeable battery. The
battery is recyclable. At the end of its useful life, under various state and
local laws, it may be illegal to dispose of this battery into the municipal
waste stream. Check with your local solid waste officials for details in
your area for recycling options or proper disposal.
About the AC Adapter
z Use only the AC adapter supplied with your computer. Use of another
type of AC adapter will result in malfunction and/or danger.
z Do not use the adapter in a high moisture environment. Never touch
the adapter when your hands or feet are wet.
z Allow adequate ventilation around the adapter when using it to
operate the device or charge the battery. Do not cover the AC adapter
with paper or other objects that will reduce cooling. Do not use the
AC adapter while it is inside a carrying case.
z Connect the adapter to a proper power source. The voltage
requirements are found on the product case and/or packaging.
z Do not use the adapter if the cord becomes damaged.
z Do not attempt to service the unit. There are no serviceable parts
inside. Replace the unit if it is damaged or exposed to excess
moisture.
Regulatory Information B-5
About the Modem
Caution
z Never install telephone wiring during a lightning storm.
z Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
z Never touch non-insulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
z Use caution when installing or modifying telephone lines.
z Avoid using the telephone function (other than a cordless type)
during an electrical storm. There may be a remote risk of electric
shock from lightning.
z Do not use the telephone function to report a gas leak in the vicinity
of the leak.
z Do not use this product near water, for example near a bathtub, wash
bowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
Caution (for USA Users)
To reduce the risk of fire, use only No.26 AWG or larger
telecommunication line cord.
Regulatory Information B-6
On the Use of the RF Device
NOTE: The information in this section applies to models with the wireless LAN module.
USA and Canada Safety Requirements and Notices
IMPORTANT NOTE: To comply with FCC RF exposure compliance
requirements, the antenna used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must
not be co-located or operating in conjunction with any other antenna or
transmitter.
Radio Frequency Interference Requirements and SAR
The FCC with its action in ET Docket 93-62 has adopted a safety standard
for human exposure to Radio Frequency (RF) electromagnetic energy
emitted by FCC certified equipment. The wireless LAN module meets the
Human Exposure limits found in OET Bulletin 65, 2001, and ANSI/IEEE
C95.1, 1992. Proper operation of this radio according to the instructions
found in this manual will result in exposure substantially below the
FCC’s recommended limits. The following safety precautions should be
observed:
z Do not touch or move antenna while the unit is transmitting or
receiving.
z Do not hold any component containing the radio such that the
antenna is very close or touching any exposed parts of the body,
especially the face or eyes, while transmitting.
z Do not operate the radio or attempt to transmit data unless the antenna
is connected; if not, the radio may be damaged.
Use in specific environments:
z The use of wireless devices in hazardous locations is limited by the
constraints posed by the safety directors of such environments.
z The use of wireless devices on airplanes is governed by the Federal
Aviation Administration (FAA).
Regulatory Information B-7
z The use of wireless devices in hospitals is restricted to the limits set
forth by each hospital.
Antenna use:
z In order to comply with FCC RF exposure limits, low gain integrated
antennas should be located at a minimum distance of 20 cm
(8 inches) or more from the body of all persons.
Explosive Device Proximity Warning
WARNING: Do not operate a portable transmitter (such as a wireless
network device) near unshielded blasting caps or in an explosive
environment unless the device has been modified to be qualified for such
use.
Antenna Warning
WARNING: To comply with the FCC and ANSI C95.1 RF exposure limits,
it is recommended that the antenna for this device be installed so as to
provide a separation distance of at least 20 cm (8 inches) from all persons
and that the antenna must not be co-located or operating in conjunction
with any other antenna or radio transmitter. It is recommended that the
user limit exposure time if the antenna is positioned closer than 20 cm
(8 inches).
Use on Aircraft Caution
CAUTION: Regulations of the FCC and FAA prohibit airborne operation
of radio-frequency wireless devices because their signals could interfere
with critical aircraft instruments.
Regulatory Information B-8
EMC Requirements
This device uses, generates and radiates radio frequency energy. The
radio frequency energy produced by this device is well below the
maximum exposure allowed by the Federal Communications
Commission (FCC).
This device complies with the limits for a Class B digital device pursuant
to Part 15 subpart C of the FCC Rules and Regulations. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
The FCC limits are designed to provide reasonable protection against
harmful interference when the equipment is installed and used in
accordance with the instruction manual and operated in a commercial
environment. However, there is no guarantee that interference will not
occur in a particular commercial installation, or if operated in a residential
area.
If harmful interference with radio or television reception occurs when the
device is turned on, the user must correct the situation at the user’s own
expense. The user is encouraged to try one or more of the following
corrective measures:
z Reorient or relocate the receiving antenna.
z Increase the separation between the equipment and receiver.
z Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
z Consult the dealer or an experienced radio/TV technician for help.
CAUTION: The Part 15 radio device operates on a non-interference basis
with other devices operating at this frequency. Any changes or
modification to said product not expressly approved by the manufacturer
could void the user’s authority to operate this device.
Regulatory Information B-9
Canada Radio Frequency Interference Requirements
To prevent radio interference to the licensed service, this device is
intended to be operated indoors and away from windows to provide
maximum shielding. Equipment (or its transmit antenna) that is installed
outdoors is subject to licensing.
Pour empêcher que cet appareil cause du brouillage au service faisant
l'objet d'une licence, il doit être utilisé à l'intérieur et devrait être placé
loin des fenêtres afin de fournir un écran de blindage maximal. Si le
matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire
l'objet d'une licence.
European Union CE Marking and Compliance Notices
Statements of Compliance
English
This product follows the provisions of the European Directive
1999/5/EC.
Danish
Dette produkt er i overensstemmelse med det europæiske direktiv
1999/5/EC.
Dutch
Dit product is in navolging van de bepalingen van Europees Directief
1999/5/EC.
Finnish
Tämä tuote noudattaa EU-direktiivin 1999/5/EC määräyksiä.
French
Ce produit est conforme aux exigences de la Directive Européenne
1999/5/EC.
German
Dieses Produkt entspricht den Bestimmungen der Europäischen
Richtlinie 1999/5/EC.
Regulatory Information B-10
Greek
To προϊόν αυτό πληροί τις προβλέψεις της Ευρωπαϊκής Οδηγίας
1999/5/EC.
Icelandic
Þessi vara stenst reglugerð Evrópska Efnahags Bandalagsins númer
1999/5/EC.
Italian
Questo prodotto è conforme alla Direttiva Europea 1999/5/EC.
Norwegian
Dette produktet er i henhold til bestemmelsene i det europeiske direktivet
1999/5/EC.
Portuguese
Este produto cumpre com as normas da Diretiva Européia 1999/5/EC.
Spanish
Este producto cumple con las normas del Directivo Europeo 1999/5/EC.
Swedish
Denna produkt har tillverkats i enlighet med EG-direktiv 1999/5/EC.
Local Restrictions of IEEE 802.11a/b/g/n Radio Usage
802.11a wireless LAN devices: For operation within 5.15 ~ 5.25 GHz
frequency range, it is restricted to indoor usage environments, and the
antenna of this device must be integral.
CAUTION: Due to the fact that the frequencies used by 802.11a/b/g/n
wireless LAN devices may not yet be harmonized in all countries,
802.11a/b/g/n products are designed for use only in specific countries or
regions, and is not allowed to be operated in countries or regions other
than those of designated use. As a user of these products, you are
responsible for ensuring that the products are used only in the countries or
regions for which they were intended and for verifying that they are
configured with the correct selection of frequency and channel for the
country or region of use. Any deviation from permissible settings and
restrictions in the country or region of use could be an infringement of
local law and may be punished as such.
Regulatory Information B-11
The European variant is intended for use throughout the European
Economic Area. However, authorization for use is further restricted in
particular countries or regions within countries, as follows:
General
European standards dictate maximum radiated transmit power of
100 mW Effective Isotropic Radiated Power (EIRP) and the frequency
range 2400 – 2483.5 MHz.
Belgium and the Netherlands
In Belgium and the Netherlands, the product may not be used outdoors.
See the instructions next under the heading “Turning Off the Wireless
LAN Radio.”
France
Departments in Which the Wireless LAN Module Can Be Used
(Indoors Only)
The wireless LAN module can currently be used indoors only in the
following 38 departments of mainland France. Please turn off your
wireless LAN radio when operating the device in areas/places other than
the 38 departments listed:
01 Ain Orientales 36 Indre 66 Pyrénées
02 Aisne 37 Indre et Loire 67 Bas Rhin
03 Allier 41 Loir et Cher 68 Haut Rhin
05 Hautes Alpes 42 Loire 70 Haute Saône
08 Ardennes 45 Loiret 71 Saône et Loire
09 Ariège 50 Manche 75 Paris
11 Aude 55 Meuse 82 Tarn et Garonne
12 Aveyron 58 Nièvre 84 Vaucluse
16 Charente 59 Nord 88 Vosges
24 Dordogne 60 Oise 89 Yonne
25 Doubs 61 Orne 90 Territoire de Belfort
26 Drôme 63 Puy du Dôme 94 Val de Marne
32 Gers 64 Pyrénées Atlantique
Regulatory Information B-12
Departments in Which the Wireless LAN Module’s Maximum EIRP
Not Shown in the Previous Table
Frequency Ranges (MHz) Indoors Outdoors
2400 – 2446.5 10 mW Not permitted
2446.5 – 2483.5 100 mW 100 mW on private property with
Ministry of Defense approval
Turning Off the Wireless LAN Radio
NOTE: Turning the wireless LAN radio off is not the same as disabling the
wireless LAN card. It is not necessary to disable the card to meet the
regulatory requirements.
While operating the computer in those French departments that do not
allow use of the wireless LAN equipment, the user of the equipment must
turn off the wireless LAN radio in order to comply with local regulations
(see Chapter 2 for more information).
Regulatory Information B-13
电子信息产品有毒有害物质或元素名
称及含量标示
有毒有害物质或元素
项目
部件名称 铅
(Pb) 镉
(Cd) 汞
(Hg) 六价铬
(Cr+6) 多溴联苯
(PBB) 多溴二苯醚
(PBDE)
1 金属机构件 X O O O O O
2 塑料机构件 O O O O O O
3 电路板组件 X X O O O O
4 液晶面板 X X X O O O
5 硬盘 X O O O O O
6 光驱 X O O O O O
7 键盘 X O O O O O
8 充电电池组件 X X O O O O
9 适配器 X X X O O O
10 电源线 X O O O O O
11 外部信号连接线O O O O O O
12 钮扣电池 O O X O O O
13 风扇 X O O O O O
14 散热模块
(金属部分)
X O O O O O
15 喇叭 X O O O O O
O : 表示该有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 规定的限量
要求以下。
X : 表示该有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 规定
的限量要求。
(本产品使用技术无法突破之 EU RoHS 除外项目，并于下方使用项目说明)。
Regulatory Information B-14
使用除外项目如下：
1. 铅使用于部件、装置的内部连接用高融点锡焊上（铅为 85wt%
以上的有铅锡焊）。
2. 电子陶瓷部件（压电组件・陶瓷介质材料等）内的含铅量。
3. 电子部件的玻璃内的含铅量。
4. 两种以上元素组成之焊料，用于连接微处理器封装与针头且铅含
量超过 80wt% 并少于 85wt%。
5. 铅于覆晶集成电路封装内用于铸模与基板之电子接点之焊锡。
6. 于钢材、铝材、铜材中的含铅量。
7. 通孔盘状及平面数组陶瓷多层电容器焊料所含的铅。
8. 电子接点的电镀，其要求高可靠性，且没有替代性材料之镉。
9. 电池内的含铅量。
10. 电池内的含镉量。
11. 使用于钮扣电池之含汞量。