Getac Technology 304 NOTEBOOK PC User Manual IBU Notebook

Getac Technology Corp. NOTEBOOK PC IBU Notebook

Users Manual

Download: Getac Technology 304 NOTEBOOK PC User Manual IBU Notebook
Mirror Download [FCC.gov]Getac Technology 304 NOTEBOOK PC User Manual IBU Notebook
Document ID1166734
Application ID33HQHbyhFeFoktbKuvPD6A==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize317.65kB (3970625 bits)
Date Submitted2009-09-09 00:00:00
Date Available2009-09-11 00:00:00
Creation Date2009-04-15 10:15:03
Producing SoftwareMicrosoft® Office Word 2007
Document Lastmod2009-09-09 09:20:29
Document TitleIBU Notebook
Document CreatorMicrosoft® Office Word 2007
Document Author: Samuel Yu

B300
USER’S MANUAL
Rugged Mobile Computing Solutions
April 2009
TRADEMARKS
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc.
All other brand and product names are trademarks or registered trademarks
of their respective owners.
NOTE
The information in this manual is subject to change without notice.
ENERGY STAR® is a government program that offers businesses and
consumers energy-efficient solutions, making it easy to save money while
protecting the environment for future generations.
Please reference ENERGY STAR® related information from
www.energystar.gov.
As an ENERGY STAR® Partner, MiTAC Technology Corporation has
determined that this product meets the ENERGY STAR® guidelines for
energy efficiency.
An ENERGY STAR® qualified computer uses 70 % less electricity than
computers without enabled power management features.
Earning the ENERGY STAR®

When every home office is powered by equipment that has earned the
ENERGY STAR® , the change will keep over 289 billion pounds of
greenhouse gases out of the air.

If left inactive, ENERGY STAR® qualified computers enter a low-power
mode and may use 15 watts or less. New chip technologies make power
management features more reliable, dependable, and user-friendly than
even just a few years ago.

Spending a large portion of time in low-power mode not only saves
energy, but helps equipment run cooler and last longer.

Businesses that use ENERGY STAR® enabled office equipment may
realize additional savings on air conditioning and maintenance.

Over its lifetime, ENERGY STAR® qualified equipment in a single home
office (e.g., computer, monitor, printer, and fax) can save enough
electricity to light an entire home for more than 4 years.

Power management (“sleep settings”) on computers and monitors can
result in much savings annually.
Remember, saving energy prevents pollution
Because most computer equipment is left on 24 hours a day, power
management features are important for saving energy and are an easy way
to reduce air pollution. By using less energy, these products help lower
consumers’ utility bills, and prevent greenhouse gas emissions.
Table of Contents
Chapter 1
Getting Started ..................................................................1-1
Getting the Computer Running ............................................. 1-2
Unpacking ........................................................................... 1-2
Connecting to AC Power .................................................... 1-2
Opening the Cover ............................................................. 1-4
Turning On and Off the Computer ................................... 1-5
Taking a Look at the Computer ............................................. 1-6
Front Components .............................................................. 1-6
Rear Components ............................................................... 1-7
Right-Side Components...................................................... 1-8
Left-Side Components ...................................................... 1-10
Bottom Components ........................................................ 1-11
Top-open Components..................................................... 1-12
Closing Connector Covers ................................................ 1-15
Chapter 2
Operating Your Computer ................................................2-1
Starting and Stopping the Computer .................................... 2-2
Starting the Computer ....................................................... 2-2
Stopping the Computer ..................................................... 2-2
Using the Internal Keyboard .................................................. 2-4
Typewriter Keys .................................................................. 2-4
Cursor-Control Keys ............................................................ 2-4
Numeric Keypad ................................................................. 2-5
Function Keys ...................................................................... 2-6
Fn Key .................................................................................. 2-6
Hot Keys .............................................................................. 2-6
Using the Touchpad ................................................................ 2-9
Configuring the Touchpad............................................... 2-11
Using the Touchscreen (Optional) ....................................... 2-12
Using the Quick Buttons ....................................................... 2-14
Using the Hard Disk Drive .................................................... 2-16
Installing a Second Hard Disk Drive (Optional) .............. 2-16
Using the Optical Drive (Optional) ...................................... 2-18
Inserting and Removing a Disc ........................................ 2-19
Using the Video Features ..................................................... 2-21
Configuring the Display Modes ....................................... 2-21
Using the Audio Features ..................................................... 2-22
Connecting Audio Devices ............................................... 2-23
Using the Communication Features .................................... 2-24
Using the Modem ............................................................. 2-24
Using the LAN ................................................................... 2-25
Using the Wireless LAN .................................................... 2-26
Using the Bluetooth® Feature.......................................... 2-29
Using the 3G Feature (Optional) ..................................... 2-34
Using the Fingerprint Sensor ............................................... 2-38
Enrolling Fingerprints ....................................................... 2-40
Changing the Settings ...................................................... 2-42
Chapter 3
Managing Power ...............................................................3-1
AC Adapter .............................................................................. 3-2
Battery Pack ............................................................................. 3-3
Charging the Battery Pack ................................................. 3-3
Initializing the Battery Pack ............................................... 3-4
Checking the Battery Level ................................................ 3-5
Replacing the Battery Pack ................................................ 3-6
Installing a Second Battery Pack (Optional) ..................... 3-7
Battery Low Signals and Actions ..................................... 3-10
Power Management ............................................................. 3-11
Hibernation ....................................................................... 3-12
Power-Saving Tips ................................................................. 3-13
Chatper 4
Expanding Your Computer ...............................................4-1
Connecting an External Monitor ........................................... 4-2
Connecting a Serial Device ..................................................... 4-4
Connecting a USB Device ....................................................... 4-5
Connecting an IEEE 1394 Device ............................................ 4-6
Using Smart Cards (Optional) ................................................. 4-7
Inserting and Removing a Smart Card .............................. 4-7
Using PC Cards ......................................................................... 4-8
Inserting and Removing a PC Card .................................... 4-8
Using ExpressCards (Optional) ............................................. 4-10
ExpressCard Type .............................................................. 4-10
Inserting and Removing an ExpressCard......................... 4-11
Using the Card Reader .......................................................... 4-12
Using the Port Replicator (Optional) ................................... 4-14
System Memory Upgrade ..................................................... 4-15
Chapter 5
Using BIOS Setup and System Recovery ..........................5-1
BIOS Setup ............................................................................... 5-2
When to Use........................................................................ 5-2
Starting BIOS Setup ............................................................ 5-2
Information Menu .............................................................. 5-4
Main Menu .......................................................................... 5-5
Advanced Menu .................................................................. 5-6
Security Menu ..................................................................... 5-7
Boot Menu .......................................................................... 5-9
Exit Menu .......................................................................... 5-10
System Recovery .................................................................... 5-11
Chapter 6
Using the TPM and P1 Utility ............................................6-1
Using TPM (Trusted Platform Module) .................................. 6-2
P1 Quick Launch Key Utility ................................................... 6-3
Chapter 7
Caring for the Computer...................................................7-1
Protecting the Computer ....................................................... 7-2
Using the Windows Security Center .................................. 7-2
Using the Cable Lock .......................................................... 7-3
Taking Care of the Computer ................................................ 7-4
Location Guidelines ............................................................ 7-4
General Guidelines ............................................................. 7-4
Cleaning Guidelines ............................................................ 7-5
Battery Pack Guidelines...................................................... 7-5
Touchscreen Guidelines...................................................... 7-6
When Traveling ....................................................................... 7-8
Chapter 8
Troubleshooting ................................................................8-1
Preliminary Checklist............................................................... 8-2
Solving Common Problems .................................................... 8-3
Battery Problems ................................................................ 8-3
Bluetooth Wireless Transmission Problems ...................... 8-3
Display Problems ................................................................. 8-4
ExpressCard Problems......................................................... 8-5
Hardware Device Problems ................................................ 8-5
Hard Disk Drive Problems................................................... 8-5
Keyboard, Mouse, and Touchpad Problems ..................... 8-6
LAN Problems ...................................................................... 8-6
WLAN Problems .................................................................. 8-7
Modem Problems ................................................................ 8-8
Optical Drive Problems ....................................................... 8-8
PC Card Problems ................................................................ 8-9
Power Management Problems ........................................ 8-10
Software Problems ........................................................... 8-11
Sound Problems ................................................................ 8-11
Startup Problems .............................................................. 8-12
Other Problems ................................................................. 8-12
Resetting the Computer ....................................................... 8-13
Appendix A Specifications .................................................................... A-1
Appendix B Regulatory Information ................................................... B-1
On the Use of the System ....................................................... B-2
Class B Regulations ............................................................. B-2
Safety Notices ..................................................................... B-3
On the Use of the RF Device .................................................. B-6
USA and Canada Safety Requirements and Notices ........ B-6
European Union CE Marking and Compliance Notices.... B-9
Chapter 1
Getting Started
Congratulations on purchasing this rugged computer.
This chapter first tells you step by step how to get the computer up and
running. Then, you will find a section briefly introducing the external
components of the computer.
Getting the Computer Running
This section guides you through the procedures for getting the computer
ready for operation.
Unpacking
After unpacking the shipping carton, you should find these standard items:

Rugged computer

Accessories:
 AC adapter
 AC power cord
 Touchscreen pen (depending on your model)
Inspect all the items. If any item is damaged or missing, notify your dealer
immediately.
Keep the shipping carton and packing materials in case you need to ship or
store the computer in the future.
Connecting to AC Power
The computer operates either on the external AC power or internal battery
power. It is suggested that you use AC power when you start up the
computer for the very first time.
1. Make sure that the computer is turned off.
2. Plug the DC cord of the AC adapter to the power connector of the
computer ().
3. Plug the female end of the AC power cord to the AC adapter and the
male end to an electrical outlet ().
4. When the AC adapter is connected, power is being supplied from the
electrical outlet to the AC adapter and onto your computer. Now, you
are ready to turn on the computer.
5. When the AC adapter is connected, it also charges the battery pack. The
Battery Charge Indicator on the computer glows amber to indicate that
charging is in progress. When the battery is fully charged, the Battery
Charge Indicator (
) glows green. (For information on using battery
power, see Chapter 3.)


Opening the Cover
Open the top cover by pushing on the cover latch () and lifting up the
cover (). You can tilt the cover forward or backward for optimal viewing
clarity.
Turning On and Off the Computer
Turning On
1. Make sure that the computer is connected to AC power or battery is fully
charged.
2. Open the top cover
3. Press the power button (
).
4. Each time the computer is turned on, it performs a Power-On Self Test
(POST), and the operating system such as Windows should start.
Turning Off
To turn off the computer power, use the “Shut Down” command of your
operating system.
Taking a Look at the Computer
Front Components
Ref
Component
Description


Top Cover Latch
Locks the top cover.
3G Antenna
Serves as the antenna for wireless
modem.
NOTE: For data transmission only.

Handle
Provides a convenient way to carry the
computer anywhere.
See Also
P. 1-4
P. 2-34
Rear Components
Ref
Component
Description
See Also

Power
Connector
Connects the AC adapter.
P. 1-2

USB Port
Connects a USB device, such as a USB flash
disk, printer, digital camera, joystick, and
more.
P. 4-5

Expansion Bus
Connector
Connects to a Port Replicator.


VGA Connector
Connects an external display monitor.
P. 4-2
Serial
Connector
Connects a serial mouse or serial
communication device.
P. 4-4

Kensington
Lock
Locks the computer to a stationary object
for security.
P. 7-3
P. 4-14
Right-Side Components
Ref
Component
Description

Expansion Card
Slot
Depending on your model, the expansion
card slot can be any of the following:
ExpressCard
Slot
Accepts an ExpressCard/34 or
ExpressCard/54 for additional functions.
PCMCIA Slot
Accepts a PC card for additional functions.
P. 4-8

Mini IEEE 1394
Port
Connects an IEEE 1394 device such as a
scanner, printer, DVCAM, VCR, and more.
P. 4-6

RF
Serves as the master control that turns the
wireless LAN radio, Bluetooth radio, and
WWAN on/off.
On/Off Switch
See Also
P. 4-10
P. 2-27,
2-29,
2-34
Ref
Component
Description
See Also

Card Reader


RJ-11 Connector Connects the telephone line.
P. 2-24
Hard Disk Drive
Compartment
Inside is the hard disk drive.
P. 2-16

USB Ports
Each of the two ports connects a USB
device, such as a USB flash disk, printer,
digital camera, joystick, and more.

Expansion Card
Slot
Depending on your model, the expansion
card slot can be any of the following:
Smart Card
Reader
Accepts a smart card for additional
security feature.
P. 4-7
PCMCIA Slot
Accepts a PC card for additional functions.
P. 4-8

GPS Antenna
pass-through
Connector
Connects to the optional antenna for GPS
receiver. (You need to install third-party
GPS navigation software to take
advantage of the GPS feature.)

Audio Output
Connector
Connects a set of headphones, external
speakers with amplifier, or an audio
recording device.
P. 2-23
Microphone
Connector
Connects an external microphone.
P. 2-23
Accepts a MultiMediaCard (MMC), Secure
Digital (SD), Memory Stick (MS) or
Memory Stick PRO (MS PRO) card for
removable storage media.
RJ-45 Connector Connects the LAN cable.
P. 4-12
P. 4-5
P. 2-25
Left-Side Components
Ref
Component
Description

Battery Pack
Supplies power to your computer when
external power is not connected.

Media Bay
Depending on your model, the media bay
may contain any of the following:
Combo Drive/
Accepts a compact disc for installing or
DVD Dual Drive/ loading software, accessing data, and
Super Multi
playing music/video.
Drive
Secondary
Battery Pack
Supplies power to your computer when
external power is not connected.
Secondary Hard Inside is the hard disk drive.
Disk Drive
See Also
P. 3-3
P. 2-18
P. 3-7
P. 2-16
Bottom Components
Ref
Component

Memory Slots
Description
Inside are the memory slots for expanding
the memory size of your computer.
See Also
P. 4-15
Top-open Components
Ref

Component
LCD Screen
Description
Displays the output of the computer. May
include the optional touchscreen feature.
See Also
P. 2-21
Ref
Component

Quick Buttons
P1
Description
See Also
Turns off/on the LCD display and LED
indicators, or
User customized program quick launch
key.
NOTE: The function of P1 quick button
depends on your setting in BIOS Setup
program under the Advanced menu (see
chapter 5 for details).
P. 2-14
Enables/disables power saving when using
battery power.
P. 2-14
P. 6-3
Lights green when power saving mode is
ON.
Enables/disables sunlight readable display.
P. 2-14
Lights green when sunlight readable
mode is ON.
Enables/disables light sensor.
P. 2-14
Lights green when light sensor is ON.

Power Button
Turns the computer power ON and OFF.
P. 1-5

Touchscreen
Pen
Provides a convenient way to use the
touchscreen. Can be stretched for better
grip and handling.
P. 2-12

Touchpad
Serves as the pointing device of the
computer.

Indicators
Show the current status of the computer’s
devices.
Hard Disk Drive
/ Optical Drive
Blinks green when computer is reading /
writing data to the hard disk or optical
drive.
P. 2-9
P. 2-16
Ref
Component
Description
Card Reader
Blinks green when computer is reading /
writing data to the storage card.
Caps Lock
Lights green when Caps Lock is on.
See Also
P. 4-12
P. 2-5
Num Lock / HDD Lights green when Num Lock is on.
Heater
Lights amber when optional hard disk
heater is on (temperature is lower than
5oC when booting your computer).
P. 2-27

Microphone
Receives sound and voice for the
computer.
P. 2-22

Keyboard
Serves as the data input device of the
computer.

Fingerprint
Sensor
Serves as the fingerprint verification,
preventing unauthorized access to your
computer.
P. 2-38

Stereo Speaker
Sends out sound and voice from the
computer.
P. 2-22
Indicators
Show the current status of the computer’s
devices.
Power
Lights green when computer is on.
P.2-4
P. 1-5
Blinks green when computer is on Sleep
mode.
Battery Charge
Lights green when the battery is fully
charged.
Lights amber when the battery is being
charged.
Blinks red when the battery’s capacity is
below 10 %.
Blinks amber when the battery is in an
abnormal condition.
P. 3-3
Ref
Component
Description
See Also
Lights green when WLAN is on.
P. 2-27
Bluetooth
Lights green when Bluetooth is on.
P. 2-29
3G
Lights green when 3G is on.
P. 2-34
WLAN
Closing Connector Covers
It is important to close the connector covers completely to ensure the
waterproof integrity. When closing the covers, push the four corners and
make sure that the cover fits in completely.
Chapter 2
Operating Your
Computer
This chapter provides information about the use of the computer.
If you are new to computers, reading this chapter will help you learn the
operating basics. If you are already a computer user, you may choose to read
only the parts containing information unique to your computer.
Starting and Stopping the
Computer
There are a number of ways to start and stop the computer.
Starting the Computer
You always start the computer using the power button.
A computer starts up with an operating system (OS) existing on the storage
device such as the hard disk. The computer will automatically load the OS
after you turn it on. This process is called booting.
Stopping the Computer
When you finish a working session, you can stop the computer by turning
off the power or leaving the computer in Sleep or Hibernation mode:
To stop in
this mode...
Off
Do this...
Click Start  Shut Down … This can
prevent loss of unsaved data or damage
to your software programs.
To start up or
resume again
Press the power
button.
If the system is locked up because of
hardware or software problems, press the
power button to turn off the computer.
Sleep
Depending on your settings in Windows,
you can place the computer in Sleep
mode by:

Closing the display cover
Press any key.
To stop in
this mode...
Hibernation
Do this...

Pressing the Fn+F12 hot key

Pressing the power button
Depending on your settings in Windows,
you can place the computer in
Hibernation mode by:

Closing the display cover

Pressing the Fn+F12 hot key

Pressing the power button
To start up or
resume again
Press the power
button.
If you choose to stop in Sleep or Hibernation mode, you can return to where
you left off the next time you start up the computer. (See “Power
Management” in Chapter 3 for more information.)
Using the Internal Keyboard
Your keyboard has all the standard functions of a full-sized computer
keyboard plus an Fn key added for specific functions.
The standard functions of the keyboard can be further divided into four
major categories:

Typewriter keys

Cursor-control keys

Numeric keys

Function keys
Typewriter Keys
Typewriter keys are similar to the keys on a typewriter. Several keys are
added such as the Ctrl, Alt, Esc, and lock keys for special purposes. When the
lock keys ( aps Lock and Num Lk) are pressed, their corresponding indicators
light up.
The Control (Ctrl) / Alternate (Alt) key is normally used in combination with
other keys for program-specific functions. The Escape (Esc) key is usually
used for stopping a process. Examples are exiting a program and canceling a
command. The function depends on the program you are using.
Cursor-Control Keys
Numeric Keypad
A 15-key numeric keypad is embedded in the typewriter keys as shown next:
Numeric keys facilitate entering of numbers and calculations. When Num
Lock is on, the numeric keys are activated; meaning you can use these keys
to enter numerals.

Fn

Function Keys
On the top row of the keys are the function keys: F1 to F12. Function keys
are multi-purpose keys that perform functions defined by individual
programs.
Fn Key
The Fn key, at the lower left corner of the keyboard, is used with another
key to perform the alternative function of a key. The letter “Fn” and the
alternative functions are identified by the color of blue on the keytop. To
perform a desired function, first press and hold Fn, then press the other key.
Hot Keys
Hot keys refer to a combination of keys that can be pressed any time to
activate special functions of the computer. Most hot keys operate in a cyclic
way. Each time a hot key combination is pressed, it shifts the corresponding
function to the other or next choice.
You can easily identify the hot keys with the icons imprinted on the keytop.
The hot keys are described next.
Key
Description
Switches the wireless LAN radio on and off.
Switches the night vision feature on and off for
viewing the display when using night vision goggles
(optional).
Decreases the sound volume.
Increases the sound volume.
Key
Description
Switches the display output to one of the following
when external devices are connected.
Upon booting the system with CRT:
LCD
CRT
LCD & CRT
NOTE: This function only applies to Plug & Play display
devices.
Decreases the LCD brightness.
Increases the LCD brightness.
Switches the touchscreen on and off (option).
Switches the touchpad off and on.
Switches the system sound output off (mute) and on.
Switches the display on and off.
Serves as the sleep button that you can define with
Windows’ Power Options. (See the “Power
Management” in Chapter 3.)
Switches the keyboard backlight on and off (option).
Euro Symbol
You can press the euro dollar sign
on various keyboards.

To press the euro sign on a United States-International keyboard, hold
down the Alt Gr key and press 5 (which has an euro sign on it).

To press the euro sign on a standard United States keyboard, hold down
either of the Alt keys and type 0128 on the numeric keypad part of your
keyboard.

To press the euro sign on an UK keyboard, hold down the Alt Gr key and
press 4 (which has an euro sign on it).
Windows Keys
The keyboard has two keys that perform Windows-specific functions:
Windows Logo key and
Application key.
The
Windows Logo key opens the Start menu and performs
software-specific functions when used in combination with other keys. The
Application key usually has the same effect as a right mouse click. (See
your Windows manual for more information.)
Using the Touchpad

Fn+F9

The touchpad is a pointing device that allows you to communicate with the
computer by controlling the location of the pointer on the screen and
making selection with the buttons.
The touchpad consists of a rectangular pad (work surface) and a left and
right buttons. To use the touchpad, place your forefinger or thumb on the
pad. The rectangular pad acts like a miniature duplicate of your display. As
you slide your fingertip across the pad, the pointer (also called cursor) on the
screen moves accordingly. When your finger reaches the edge of the pad,
simply relocate yourself by lifting the finger and placing it on the other side
of the pad.
Here are some common terms that you should know when using the
touchpad:
Term
Action
Point
Move your finger on the pad until the cursor points to the
selection on the screen.
Click
Press and release the left button.
–or–
Tap gently anywhere on the pad.
Double-click
Press and release the left button twice in quick succession.
–or–
Tap twice on the pad rapidly.
Drag and
drop
Press and hold the left button, then move your finger until
you reach your destination (drag). Finally, release the
button (drop) when you finish dragging your selection to
the destination. The object will drop into the new location.
–or–
Gently tap twice on the pad and on the second tap, keep
your finger in contact with the pad. Then, move your
finger across the pad to drag the selected object to your
destination. When you lift your finger from the pad, the
selected object will drop into place.
Term
Scroll
Action
To scroll is to move up and down or left and right in the
working area on the screen.
To move vertically, place your finger on the right or left
edge of the pad and slide your finger up and down along
the edge. To move horizontally, place your finger on the
top or bottom edge of the pad and slide your finger left
and right.
This function works only after you install the touchpad
driver supplied with the computer and it may not work for
all applications.
TABLE NOTE: If you swap the left and right buttons, “tapping” on the
touchpad as an alternative method of pressing the left button will no longer
be valid.
Configuring the Touchpad
You may want to configure the touchpad to suit your needs. For example, if
you are a left-handed user, you can swap the two buttons so that you can
use the right button as the left button and vice versa. You can also change
the size of the on-screen pointer, the speed of the pointer, and so on.
To configure the touchpad, go to Control Panel  Hardware and Sounds 
Mouse Properties.
Using the Touchscreen (Optional)


Fn+F8
The touchscreen is a touch-sensitive device that allows you to easily use the
computer without a mouse or touchpad.
Here are some common terms that you should know when using the
touchscreen:
Term
Action
Click/Point
Tap gently on the touchscreen.
Double-click
Tap twice on the touchscreen rapidly.
Drag and drop
Press lightly on the touchscreen and move your finger
until you reach your destination (drag). Finally, release
your finger (drop) when you finish dragging your
selection to the destination. The object will drop into the
new location.
Using the Quick Buttons
Located on top of the keyboard are four quick buttons:

LCD display and LED indicators quick button (P1) to turn off the LCD
display and LED indicator, or
User customized program quick launch key (P1) – see chapter 6 for more
details.
P1
Advanced

Power saving quick button (
) to enter into power saving mode
when using battery power. The system will turn down the panel
backlight and sacrifice processing speed to gain more battery life.
Lights green when power saving mode is enabled.

Sunlight readable quick button ( ) for enabling the sunlight readable
LCD display.
Lights green when sunlight readable mode is enabled.

Light sensor quick button (
) for adjusting the LCD brightness
automatically based on your computer’s surrounding lighting condition.
Lights green when light sensor is enabled.
Using the Hard Disk Drive
Your computer comes with a removable hard disk drive as drive C. A hard
disk drive is a storage device with non-removable, rotating, magnetic
storage platters inside it. It is where your operating system and application
software programs are stored.
Your hard disk drive is a 2.5-inch PATA (parallel ATA) / SATA (serial ATA)
hard disk drive. This type of drive embodies the latest in fast, reliable mass
storage by integrating all the control circuitry necessary for operation
directly onto the drive itself.
The system may come with an optional heater that automatically turns on
for low temperature operation.



Installing a Second Hard Disk Drive
(Optional)
You can install a second hard disk drive to your computer. To install a second
hard disk drive:
1. Make sure that system power is off.
2. Open the media bay cover by sliding the release latch towards the left.
3. Press upward the optical drive release latch () and carefully pull on the
ribbon strip () to remove the optical drive.
4. Be careful to observe the correct orientation and slide the hard disk drive
bracket into the media bay until it reaches the end.
5. Close the media bay cover to secure the hard disk drive bracket.


Using the Optical Drive (Optional)
Your computer may come with an optical drive, usually configured as drive
D.
Depending on the model, your drive is one of the following:

Combo drive can work both as a DVD drive (reading DVD discs in
addition to CDs, audio CDs and CD-R/-RW discs), and also as a CD
recorder (writing to CD-R/-RW discs).

DVD Dual drive besides the Combo drive function, can write to
DVD+R/+RW/-R/-RW discs.

Super Multi drive besides the Combo drive function, can write to
DVD+R/+RW/-R/-RW and DVD-RAM discs.




Inserting and Removing a Disc
Follow this procedure to insert or remove a disc:
1. Turn on the computer.
2. Open the media bay cover by sliding the release latch towards the left.
3. Press the eject button and the DVD tray will slide out partially. Gently
pull on it until it is fully extended.
4. To insert a disc, place down the disc in the tray with its label facing up.
Slightly press the center of the disc until it clicks into place.
To remove a disc, hold the disc by its outer edge and lift it up from the
tray.
Eject button
5. Gently push the tray back into the drive.
6. Close the media bay cover.
Using the Video Features
The video subsystem of your computer features:

13.3-inch wide TFT (Thin-Film Transistor) color LCD display with
1024×768 XGA resolution

Multi-display capability, which allows you to expand your desktop on the
screen to another display device so that you have more desktop space to
work on

Sunlight-readable LCD display by pressing sunlight readable quick
button (

Automatically adjust the LCD brightness by pressing light sensor quick
button (

Optional night vision display by pressing Fn + F2

Power Management
Power Options  System
Settings
Configuring the Display Modes
Your computer has been set to a default resolution and number of colors
before shipment. You can view and change display settings through your
operating system. See your operating system documentation or online help
for specific information.
For displaying in higher resolutions, you can connect an external monitor
that supports higher resolutions. (See “Connecting an External Monitor” in
Chapter 4 for more information.)
Using the Audio Features
The audio subsystem of your computer features:

Azalia interface (high density audio codec)

2-channel analog output

Built-in microphone ()

External audio connectors () and

Set of speakers ()
Ways of playing and recording sound vary with the operating system used.
See your operating system documentation or online help for specific
information.
Connecting Audio Devices
For higher audio quality, you can send or receive sound through external
audio devices.

Audio Output Connector (green) can be connected to speakers,
headphones, or earphone set.

Microphone Connector (pink) can be connected to an external
microphone for recording voice or sound.
Using the Communication
Features
Using the Modem
The internal 56 K fax/data modem allows you to use the telephone line to
communicate with others by fax, email, or connect to an online service or
bulletin board.
To connect the telephone line to the modem, connect one end of the
modem cable to the RJ-11 connector on the computer and the other end to
the phone line.




Using the LAN
The internal 10/100/1000Base-T LAN (Local Area Network) module allows
you to connect your computer to a network. It supports data transfer rate up
to 1000 Mbps.
To connect the network cable to the LAN module, connect one end of the
LAN cable to the RJ-45 connector on the computer and the other end to the
network hub.
Using the Wireless LAN
Depending on your model, an internal mini PCI-E wireless LAN (WLAN) card
may have been pre-installed by your computer manufacturer at the factory.
This card allows you to access corporate networks or the Internet in a
wireless environment.
The WLAN features include:

Peer-to-Peer (Ad-Hoc) and Access Point (Infrastructure) modes support

WEP (Wired Equivalent Privacy) 64/128-bit data encryption

IEEE 802.11a/b/g/n standard compliance
Stated
Data Rates
Technology Maximum
(Mbps)
Throughput
(Mbps)
Band
(GHz)
Modulation
Technology
802.11a
54
54, 48, 36,
24, 18, 12,
9, 6
5.15 ~
5.35
OFDM (Orthogonal
Frequency Division
Multiplexing)
802.11b
11
11, 5.5, 2, 1
2.412 ~
2.462
DSSS (Direct
Sequence Spread
Spectrum)
802.11g
54
54, 36, 18, 9 2.4
OFDM (Orthogonal
Frequency Division
Multiplexing)
802.11n
100 Mbps
or more
100 ~ 210
Spatial multiplexing,
uses MIMO
(multiple-input
multiple-output)
2.4 / 5
If your WLAN card was provided by your dealer instead of the computer
manufacturer, contact your dealer for the correct driver to use.
Turning Off/On the WLAN Radio
To turn on the WLAN radio:
1. Make sure that the RF switch is at the ON position.
2. Press Fn+F1 to turn on the WLAN radio (see “Hot Keys” in Chapter 2),
indicated by the WLAN indicator (
) glowing in green when on.
If you need to temporarily turn off the radio, press Fn+F1. To resume
network connection, press Fn+F1 again.
It takes approximately 30 seconds for your computer to make a successful
WLAN connection and approximately 10 seconds to disconnect.
Connecting to a Wireless Network
To connect to a wireless network:
1. Make sure that the WLAN radio is on (see the previous section).
2. Right-click the Wireless Network Connection icon
located on the
Windows system tray and select Connect to a network.
3. If any wireless network is detected, the following window appears on
screen. Click the Show drop down menu and select Wireless.
4. Select a wireless network to connect to by clicking a selection, then click
Connect.
5. Depending on the settings, you may be asked to enter a WEP key (refer
to your Windows online help for more information on setting a wireless
network connection).
Using the Bluetooth® Feature
Depending on your model, your computer may incorporate the Bluetooth
capability for short-range (about 10 meters) wireless communications
between devices without requiring a cable connection.
With Bluetooth wireless technology, data can be transmitted through walls,
pockets and briefcases as long as two devices are within range.
Turning On and Off the Bluetooth Feature
1. Make sure that the RF switch is at the ON position.
2. Right-click the GETAC Utility icon (
and select Quick Bar.
) located on Windows system tray
3. The following appears onscreen. To turn on the Bluetooth feature, click
the Bluetooth quick button.
The Bluetooth indicator (
) will glow in green. By default, your
computer is in the general discoverable and pairable mode after the
Bluetooth feature is turned on.
4. To turn off the Bluetooth feature, click the Bluetooth quick button
again.
The status of the Bluetooth connection is indicated by the Bluetooth icon
located in the system tray in the lower-right part of the screen.
Status
Icon
Off
(blue with red logo)
On
(blue with white logo).
Connected
(blue with green logo)
You can use the Bluetooth Utility to configure Bluetooth wireless connection
settings and transfer files.
Connecting to another Bluetooth Device
1. Make sure that the target Bluetooth device is turned on, discoverable
and within close range. (See the documentation that came with the
Bluetooth device.)
2. Right-click the
icon, and then click Add New Connection.
3. The Add New Connection Wizard window appears. Select Express Mode
(Recommended), and then click Next.
4. Select the device to connect to and click Next.
5. Depending on the type of Bluetooth device that you want to connect to,
you will need to enter the pertinent information.
Sending a File
1. Make sure that the target Bluetooth device is turned on, discoverable
and within close range. (See the documentation that came with the
Bluetooth device.)
2. Right-click the
icon, and then click Wireless File Transfer.
3. In the Wireless File Transfer window, click Add to browse for the file to
send.
4. Click the target device from the list, and then click Send to start the
transfer procedure.
Using the 3G Feature (Optional)
3G is the third generation of mobile phone standards and technology, after
2G. It is based on the International Telecommunication Union (ITU) family of
standards under the International Mobile Telecommunications programme.
Unlike IEEE 802.11 networks, 3G networks are wide area cellular telephone
networks. IEEE 802.11 networks are short range, high-bandwidth networks
primarily developed for data.


Installing a SIM Card
To use the 3G feature (GSM/UMTS/EDGE/GPRS/EVDO/HSUPA) on your
computer, you need to subscribe to 3G service and install the 3G SIM card
from your service provider, network operator, or other vendor.
To install the SIM card, follow these steps:
1. Make sure that the computer is not turned on or connected to AC
power.
2. Open the media bay cover by sliding the release latch towards the left.
3. Press upward the optical drive release latch () and carefully pull on the
ribbon strip () to remove the optical drive from the media bay.
4. Carefully place your computer upside down and locate the SIM card slot.
5. Insert the SIM card into the holder. Make sure the beveled corner on the
SIM card is facing towards the slot and that the golden contact area on
the card is facing downwards.
6. Replace the optical drive.
7. Close the media bay cover to secure the optical drive in place.
Turning On and Off the 3G Feature
1. Make sure that the RF switch is at the ON position.
2. Right-click the GETAC Utility icon (
and select Quick Bar.
) located on Windows system tray
3. The following appears onscreen. To turn on the 3G feature, click the 3G
quick button.
The 3G indicator (
) will glow in green.
4. To turn off the 3G feature, click the 3G quick button again.
You can use the 3G software application to configure 3G connection
settings.
Using the Fingerprint Sensor
To start using the fingerprint sensor:
1. Locate and slide open the fingerprint sensor cover.


2. Go to Start menu  Programs  Protector Suite QL  Control Center.
The following screen appears.
The computer features the Fingerprint Control Center utility for enrolling
your fingers for added security. It contains the following:

Fingerprints – for enrolling or editing fingerprint templates

Settings – for configuring the fingerprint software

Help – for browsing the Fingerprint Control Center online Help
Start
 Programs  Protector Suite QL  Help
Enrolling Fingerprints
To start enrolling your fingerprint(s):
1. Click Fingerprints on the main screen.
2. Click Initialize.
3. The following screen appears. Read carefully the contents of the
Welcome screen and then click Next to continue.
4. Follow the onscreen instructions to complete enrolling your
fingerprint(s).
Changing the Settings
To change the settings of your fingerprint software:
1. Click Settings on the main screen.
2. Click System Settings.
3. The following screen appears. Proceed to make the necessary settings to
your fingerprint software.
4. Click OK after you have finished with your settings.
Chapter 3
Managing Power
Your computer operates either on external AC power or on internal battery
power.
This chapter tells you how you can effectively manage power. To maintain
optimal battery performance, it is important that you use the battery in the
proper way.
AC Adapter




The AC adapter serves as a converter from AC (Alternating Current) to DC
(Direct Current) power because your computer runs on DC power, but an
electrical outlet usually provides AC power. It also charges the battery pack
when connected to AC power.
The adapter operates on any voltage in the range of 100~240 V AC.
Battery Pack
The battery pack is the internal power source for the computer. It is
rechargeable using the AC adapter.
The operating time of a fully charged battery pack depends on how you are
using the computer. When your applications often access peripherals, you
will experience a shorter operating time.
Charging the Battery Pack









To charge the battery pack, connect the AC adapter to the computer and an
electrical outlet. The Battery Charge Indicator (
) on the computer glows
amber to indicate that charging is in progress. You are advised to keep the
computer power off while the battery is being charged. When the battery is
fully charged, the Battery Charge Indicator lights green.
The charging times are as follows:
Charging Time
Battery Type
Computer is Off
Computer is On and
in Idle State
6-cell (4 A)
2.5~3.5 hours
3.0~4.3 hours
9-cell (4 A)
3.5~4.5 hours
4.0~6.0 hours
Initializing the Battery Pack
You need to initialize a new battery pack before using it for the first time or
when the actual operating time of a battery pack is much less than expected.
Initializing is the process of fully charging, discharging, and then charging. It
can take several hours.
1. Make sure that the computer power is turned off. Connect the AC
adapter to fully charge the battery pack.
2. After the battery pack is fully charged, turn on the computer. When the
message “Click mouse or press  for Menu” appears, click
the touchpad’s left button or press the Enter key to invoke the program.
3. A small window appears, select Launch System Setup.
4. Disconnect the AC adapter and leave the computer on until the battery
is fully discharged. The computer will shut down automatically.
5. Connect the AC adapter to fully charge the battery pack.
Checking the Battery Level
By Operating System
You can check the approximate battery level using the battery meter
function of the operating system. To read the battery level in Windows, click
the icon on the system tray.
By Gas Gauge
On the exterior side of the battery pack is a gas gauge for displaying the
estimated battery charge. When the battery pack is not installed in the
computer and you want to know the battery charge, you can press the
switch with a pointed device to see the corresponding value of indicator
segment that light green. The value of the corresponding green segment
indicates the relative percentage of the battery charge. The battery pack is
fully discharged when you see no segment glowing green.
Switch
Replacing the Battery Pack


If you often rely on battery power for a long period of time while traveling,
you may consider the purchase of an additional battery pack from your
dealer and keep it with you in a fully charged state as a backup.
To replace the battery pack, follow these steps:
1. Make sure that the computer is not turned on or connected to AC
power.
2. Locate the battery compartment on the left side of the computer.
3. Open the compartment cover by sliding the release latch to the left ()
then upwards ().
4. Pull on the ribbon strip to remove the battery pack.
5. Slide the new battery pack all the way into the slot. Make sure to
observe the correct orientation (the ribbon strip must face outward for
future battery pack removal).
6. Close the compartment cover and slide the release latch downward, then
towards the right to secure the battery pack.
Installing a Second Battery Pack (Optional)
You can install a second battery pack to your computer for a longer
operating time when AC power is not available. To install a second battery
pack:
1. Make sure that system power is off.
2. Open the media bay cover by sliding the release latch towards the left.
3. Press upwards the optical drive release latch () and carefully pull on the
ribbon strip () to remove the optical drive.
4. Slide the second battery pack all the way into the slot. Make sure to
observe the correct orientation (the ribbon strip must face outward for
future battery pack removal).
5. Close the media bay cover to secure the second battery pack.


On the exterior side of the second battery pack is a gas gauge for displaying
the estimated battery charge. When the battery pack is not installed in the
computer and you want to know the battery charge, you can press the
switch with a pointed device to see the corresponding value of indicator
segment that light green. The value of the corresponding green segment
indicates the relative percentage of the battery charge. The battery pack is
fully discharged when you see no segment glowing green.
Switch
Battery Low Signals and Actions
The battery icon changes appearance to display the current state of the
battery so that you can see how much charge remains (Windows default
setting). When the battery charge is above 25 % the battery icon is green.
When the battery charge reaches 25 % a yellow triangle with an
exclamation point (!) appears above the green battery icon. When the
charge reaches the low battery level a red circle with a white “X” appears
above the green icon. The computer’s Battery Charge Indicator (
) blinks
red to alert you to take actions.
Immediately save your data upon Battery Low. The remaining operating
time depends on how you are using the computer. If you are using the audio
subsystem, ExpressCard, hard or USB flash disk, the battery might run out of
charge very quickly.
Always respond to Battery Low by placing your computer on Hibernation
mode, turning off the computer, or connecting the AC adapter.


Power Management
Your computer supports ACPI (Advanced Configuration and Power
Interface) for power management. The power management feature allows
you to reduce the power consumption for energy saving.
With an ACPI-compliant operating system such as Windows, power supply to
different computer components is controlled on an as-needed basis. This
allows maximum power conservation and performance at the same time.
In general, Windows’ power management works in this way:
What...
Power to the hard disk is turned
off
When...
When the hard disk has been idle for a
set period.
Power to the display is turned off When the display has been idle for a set
period.
The computer enters the Sleep
mode. The hard disk and display
are turned off and the entire
system consumes less power.
When the entire system has been idle for
a set period.
When you press the Fn+F12 hot key. *
When you close the cover. *
When you press the power button. *
The computer enters the
Hibernation mode. (See the next
subsection for more
information.)
When you press the Fn+F12 hot key. *
When you close the cover. *
When you press the power button. *
* Depends on your settings in Windows.
For detailed information on power management, see Windows’ Help.
Hibernation
Power Options  System Settings
Control Panel  Mobile PC
Hibernation is a very useful feature. People frequently open many
applications when they use computers. It takes some time to get all these
applications open and running, and normally they all have to be closed
before the computer can be turned off.
When you use the hibernation feature, you do not have to close the
applications. The computer stores the state of your computer to a file on the
hard disk and then shuts down. The next time you turn on your computer,
you return to exactly where you left off.
Power-Saving Tips
Aside from enabling your computer’s power saving mode (see previous
section), you can do your part to maximize the battery’s operating time by
following these suggestions.

Press the power saving quick button (
mode when using battery power.
) to enter into power saving

Do not disable Power Management. Choose a Windows power plan that
saves power. A power plan is a collection of hardware and system
settings that control how your computer manages power.

Decrease the LCD brightness to the lowest comfortable level.

Shorten the length of time before Windows turn off the display.

Many USB devices use power just by being connected. If you use a USB
mouse, you can save power by disconnecting the mouse and using the
touchpad. If you use a USB flash drive, unplug it when you are not using
it.

If you work with an application that uses a PC card, exit the application
when you finish using it.

If you have a PC card installed, remove it when not in use. Some PC cards
drain power even while they are inactive.

Deactivate the WLAN function if you are not using it (see Chapter 2).

Deactivate the Bluetooth feature if you are not using it (see Chapter 2).

Turn off the computer when you are not using it.
Chapter 4
Expanding Your
Computer
You can expand the capabilities of your computer by connecting other
peripheral devices. When using a device, be sure to read the instructions
accompanying the device together with the relevant section in this chapter.
Connecting an External Monitor
If you want the benefits of a larger display screen with higher resolution,
you can connect an external display monitor to your computer. Follow this
procedure to connect an external monitor:
1. Make sure that the computer is not turned on.
2. Slide the release latch towards the right to open the connector cover.
3. Plug the monitor’s D-type signal connector to the computer’s VGA
connector.
4. Plug one end of the monitor’s power cord into the power socket on the
monitor and the other end to an electrical outlet.
5. To use the monitor, turn on the monitor before turning on the
computer.
6. The monitor should respond by default. If not, you can switch the display
to the monitor or to both (simultaneous display), or to multi-display by
pressing the Fn+F5 hot key. In Windows, you can also change the display
through the Display Settings Properties.
7. You can change display settings through your operating system. See
your operating system documentation or online help for specific
information.
Connecting a Serial Device
Your computer has two serial ports for connecting a serial device such as a
serial mouse or serial communication device (modem).
Follow this procedure to connect a serial device:
1. Make sure the “Serial Port COM1/COM2” item is set properly in the BIOS
Setup program. (See “Advanced Menu” in Chapter 5 for information.)
2. Make sure the computer is not turned on
3. Slide the release latch towards the right to open the port cover.
4. Plug the device cable to the serial port on the rear of the computer.
5. Turn on the computer.
Connecting a USB Device
Your computer has three USB ports for connecting USB devices, such as a
digital camera, scanner, printer, modem, and mouse.
The USB ports support transfer rates up to 12 MB/s for USB 1.1 devices and
480 MB/s for USB 2.0 devices.
To connect a USB device, slide the release latch towards the right to open
the port cover and then simply plug the device cable to one of the USB ports.
Connecting an IEEE 1394 Device
Your computer has a mini IEEE 1394 port for connecting IEEE 1394 devices
that include not only computer peripheral devices such as scanner, printer
and high-quality CCD, but also consumer electronic equipment such as
DVCAM and VCR.
To connect an IEEE 1394 device, prepare an IEEE 1394 cable. Slide the release
latch towards the right to open the connector cover. Then plug the
appropriate end of the cable to the computer’s mini IEEE 1394 connector
and the other end to the device’s corresponding connector.
Using Smart Cards (Optional)
Depending on the model, your computer has a smart card slot for additional
security feature, providing tamper-proof storage of user and account
identity. A smart card is a type of plastic card embedded with a computer
chip that stores and transacts data between you (user) and the computer.
You need to install third-party smart card software to take advantage of the
smart card feature.
Inserting and Removing a Smart Card
To insert a smart card:
1. Locate the smart card slot on the right of the computer and open the
cover.
2. Slide the smart card, with its label and embedded computer chip facing
down into the slot.
Computer
Chip
3. When a new card is seated, use the third-party smart card software to
allow your computer to read it.
To remove a smart card:
1. Make sure that the third-party smart card software is not accessing the
smart card.
2. Pull the card out of the slot.
Using PC Cards
Depending on your model, your computer has one or two PC card slots
which supports type II card and CardBus specifications.
Inserting and Removing a PC Card


To insert a PC card:
1. Locate the PC card slot(s) on the right side of the computer and open the
cover.
2. Slide the PC card, with its label facing up, into the slot until the eject
button pops out.
Eject button
3. When a new card is seated, the computer will detect it and try to install
the appropriate driver. Follow the on-screen instructions to complete the
process.
To remove a PC card:
1. Double-click on the Safely Remove Hardware
icon found on the
Windows taskbar and the Safely Remove Hardware window appears on
screen.
2. Select (highlight) the PC card from the list to disable the card.
3. Push the eject button and the card will slide out slightly.
4. Pull the card out of the slot.
Using ExpressCards (Optional)
Depending on the model, your computer has an ExpressCard slot.
ExpressCard supports the PCI Express and USB 2.0 serial data interfaces
(supporting speeds of up to 2.5 Gbps and 480 Mbps respectively), improving
speed in data transfer while conserving power usage.
ExpressCard Type
The ExpressCard slot can accommodate a 54 mm (ExpressCard/54) or 34 mm
(ExpressCard/34) wide ExpressCard. Typical ExpressCards support a very
extensive range of applications including memory, wired and wireless
communication cards, and security devices.
Shown next are the appearances of ExpressCards for your reference.
ExpressCard/54
ExpressCard/34
Inserting and Removing an ExpressCard
To insert an ExpressCard:
1. Locate the ExpressCard slot on the right side of the computer and open
the cover.
2. Slide the ExpressCard, with its label facing up, all the way into the slot
until the rear connectors click into place.
3. When a new card is seated, the computer will detect it and try to install
the appropriate driver. Follow the on-screen instructions to complete the
process.
To remove an ExpressCard:
1. Double-click on the Safely Remove Hardware
icon found on the
Windows taskbar and the Safely Remove Hardware window appears on
screen.
2. Select (highlight) the ExpressCard from the list to disable the card.
3. Push the eject button and the card will slide out slightly.
4. Pull the card out of the slot.
Using the Card Reader


Your computer has a Card Reader. The Card Reader is a small drive for
reading from and writing to removable storage cards (or called memory
cards). The Card Reader supports the MultiMediaCard (MMC), Secure Digital
(SD), Memory Stick (MS), and Memory Stick PRO (MS PRO) cards.
Shown next are the appearance and size of each card type for your
reference.
Type
MMC Card
SD Card
MS / MS PRO Card
24× 32× 1.4
(mm)
24× 32× 2.1
(mm)
21.5× 50× 2.8
(mm)
Appearance
Size
To insert a storage card:
1. Locate the Card Reader slot on the right side of the computer and open
the cover.
2. Align the card with its connector pointing to the slot and its label facing
up. Slide the card into the slot until it reaches the end.
3. Windows will detect the card and assign it a drive name.
To remove a storage card:
1. Double-click My Computer.
2. Right-click the drive with the card and select Eject.
3. Pull the card out of the slot.
Using the Port Replicator
(Optional)
A port replicator is available as an option. This device eliminates the hassles
of having you connect and disconnect the various cables when carrying your
computer around and allows a variety of peripherals to be connected
including a headphone or microphone, etc. The port replicator connects to
the expansion bus connector at the rear of your computer.
1. Slide open the expansion bus connector cover.
2. Connect your port replicator to the expansion bus connector (
).
For more detailed information, refer to the Operating Instructions of the
port replicator.


System Memory Upgrade
You can upgrade your computer by changing system memory to a maximum
of 4 GB on the two 533/667 MHz DDRII SO-DIMM slots.
To install the RAM module:
1. Remove the battery pack (see chapter 3) and make sure that the
computer is not connected to AC power.
2. Carefully place the computer upside down.
3. Remove the six screws to open the compartment cover.
4. To install the RAM module, match the module's notched part with the
socket's projected part and firmly insert the module into the socket at a
20-degree angle (). Then push down until the retaining clips lock the
module into position ().


5. Close the compartment cover and secure with six screws.
Chapter 5
Using BIOS Setup and
System Recovery
BIOS Setup Utility is a program for configuring the BIOS (Basic Input/ Output
System) settings of the computer. BIOS is a layer of software, called
firmware, that translates instructions from other layers of software into
instructions that the computer hardware can understand. The BIOS settings
are needed by your computer to identify the types of installed devices and
establish special features.
System Recovery reinstalls Windows to your system and configures it to the
system’s factory default settings.
This chapter tells you how to use the BIOS Setup and System Recovery.
BIOS Setup
When to Use
You need to run BIOS Setup Utility when:

You see an error message on the screen requesting you to run BIOS
Setup Utility.

You want to restore the factory default BIOS settings.

You want to modify some specific settings according to the hardware .

You want to modify some specific settings to optimize the system
performance.
Starting BIOS Setup



To run BIOS Setup Utility, press the Enter key or click the left touchpad
button when the prompt appears on the screen during system startup. The
prompt shows up on the screen for only a few seconds. You must press the
Enter key or click the left touchpad button quickly. A small window appears,
select Launch System Setup. The BIOS Setup Utility main screen appears as
shown next.
The BIOS Setup Utility screen can be divided into four areas:

On the top is the menu bar containing the titles of the available menus.
Each menu title brings a specific menu.

The left column of the menu displays the menu items.

The right column of the menu provides more detailed information when
a menu item is highlighted.

The bottom of the menu provides keyboard instructions for moving
around and making selections.
Moving Around and Making Selections
You must go through two or three levels to complete the setting for an
item. In most cases, there are two levels: menu title and submenu.
Use the keyboard to move around and make selections. Keyboard
information can be found at the bottom of the screen. A brief description of
keyboard usage is listed next:
Key
Function
,
Selects a menu title.
,
Selects an item or option.
+/–
Changes the value.
Enter
1) Brings up the sub-menu when available.
2) Opens or closes the option window when an item is
selected.
Esc
1) Exits BIOS Setup Utility.
2) Closes the option window if one is open.
F1
Provides help information.
F9
Loads setup defaults.
F10
Saves and exit the BIOS Setup Utility.
Information Menu
The Information menu contains the basic configuration information of the
system.
Main Menu
The Main menu contains the system date and time, as well as USB and
wireless LAN settings of the system.
System Time sets the system time.
System Date sets the system date.
Legacy USB Support enables or disables the system’s support for Legacy USB
device in DOS mode.
Wireless LAN setting this item to Off will start the system with wireless radio
off, On will start the system with the wireless radio on, and Last State will
start the system based on the state of wireless radio during your last power
off.
Advanced Menu
The Advanced menu contains the advanced settings as shown next.
P1 Function allows you to specify the P1 quick button function. When set at
Blackout the P1 quick button allows you to turn off the LCD backlight and
LED indicator. When set at Quick Btn the P1 quick button functions as a user
customized quick launch key.
CD/DVD Auto Power Control allows you to enable the optical drive’s
automatic power control when using battery power.
NIC Auto Power Control allows you to enable the NIC’s (network interface
controller) automatic power control when using battery power.
Azalia Modem PME Enable allows you to wake up the system via an Azalia
modem.
USB Wake-up From S3 allows the system to wake-up from Sleep mode via
USB device. When set at Disabled only the power button can wake-up the
system from Sleep mode.
SATA HDD Mode when set at Compatible and connecting a SATA (serial
ATA) hard drive is set as Primary on SATA controller in Legacy mode. When
connecting a PATA (parallel ATA) hard drive is set as Secondary on SATA
controller in Legacy mode.
When set at Enhanced and connecting a SATA hard drive is set as Primary on
SATA controller in Native mode. When connecting a PATA hard drive is set
as Primary on PATA controller in Legacy mode.
AHCI Configuration enables support for AHCI (Advanced Host Controller
Interface) Native command queuing and Link Power Management. Requires
Windows XP Service Pack 1 + IAA driver or newer operating system. This
item will not appear if the above item “SATA HDD Mode” is set at
Compatible.
Serial Port COM1 when enabled the serial port COM1 is configured at 3F8h,
IRQ4.
Serial Port COM2 when enabled the serial port COM2 is configured at 2F8h,
IRQ3.
Security Menu
The Security menu contains the TPM (Trusted Platform Module) setting. TPM
is a component on your computer’s mainboard that is specifically designed
to enhance platform security above-and-beyond the capabilities of today’s
software by providing a protected space for key operations and other
security critical tasks. Using both hardware and software, TPM protects
encryption and signature keys at their most vulnerable stages – operations
when the keys are being used unencrypted in plain-text form. TPM is
specifically designed to shield unencrypted keys and platform authentication
information from software-based attacks.
Upon pressing Enter, the following screen appears.
TPM Support enables or disables TPM support (see chapter 6 for details).
Current TPM State shows the current TPM state.
Change TPM State allows you to select between No Change, Clear,
Deactivate & Disable, and Enable & Activate.
Boot Menu
The Boot menu sets the sequence of the devices to be searched for the
operating system.
The bootable devices will be automatically detected during POST and shown
here, allowing you to set the sequence that the BIOS uses to look for a device
from which to load the OS. Below is a brief description of keyboard usage:
Key
Function
,
Selects (highlight) a boot device.
+, –
Changes the boot sequence.
1 to 4
Loads the default boot sequence.
f or r
Specifies if the boot device is fixed (f) or removable (r).
Moves the highlighted boot device from the “Boot priority order”
list to the “Excluded from boot order” list, and vice versa.
Shift+1 Deactivates/activates the highlighted boot device on the “Boot
priority order” list. When a device has been deactivated, an “ ”
(exclamation) symbol appears beside the item and system will
bypass it when detecting boot device during POST.
Exit Menu
The Exit menu displays ways of exiting BIOS Setup Utility. After finishing
with your settings, you must save and exit so that the changes can take
effect.
Exit Saving Changes saves the changes you have made and exits BIOS Setup
Utility.
Exit Discarding Changes exits BIOS Setup Utility without saving the changes
you have made.
Load Setup Defaults loads the factory default values for all the items.
Discard Changes restores the previous values for all the items.
Saves Changes saves the changes you have made.
System Recovery
You need to run System Recovery when:

Your computer does not start correctly.

Your Windows operating system does not start at all.

You want to restore the factory default Windows settings.
To run System Recovery:
1. During system startup when the following screen appears, press Ctrl +
Alt + F2 keys for four seconds or press Enter and select HDI Recovery
when a small window appears on the screen.
2. The message This will help you reinstall Windows to the whole HDD
to factory default. All data on HDD will be lost appears on the screen
to ask if you want to access System Recovery. Type 1 to continue or type
0 to exit.
3. A warning message appears as follows:
****************************************
You must accept the following terms before performing the recovery
process:
1. The recovery software is solely the purpose of reinstalling or
restoring software associated with the hard disk of this operating
GETAC machine.
2. Except the above, no other use is granted hereunder.
****************************************
(1)Yes, I agree to the provisions of this agreement and wish to
continue.
(0)No, I do not agree to the provisions of this agreement and do
not wish to continue.
Type 1 to continue.
4. Type 1 again when the message Are you sure you want to recover now?
(1)Yes (0)No appears onscreen. The following screen appears:
5. Your system will start the recovery process and Windows operating
system will be re-installed to its default setting.
Chapter 6
Using the TPM and P1
Utility
Your computer comes with an added security feature known as the TPM
(Trusted Platform Module) – a component on your computer’s mainboard
that is specifically designed to enhance platform security above-and-beyond
the capabilities of today’s software by providing a protected space for key
operations and other security critical tasks.
Also, located on top of your keyboard is the P1 quick launch key. The quick
launch key utility allows you to re-define (customize) the P1 quick launch key
according to your needs.
This chapter describes how to use these utilities.
Using TPM (Trusted Platform
Module)
TPM is a hardware-based security feature that can be used to create and
manage computer-generated digital certificates. When combined with
security software, the TPM enhances existing network and computer security
by enabling features such as file protection capabilities and protected
e-mail.
TPM Support

Security
Change TPM State

Security

You can use the certificates to:

Send and receive secure email from email clients like Microsoft Windows
Mail/Outlook Express, Microsoft Outlook or Netscape Messenger

Set up browser (e.g. Netscape Navigator or Internet Explorer) and web
server (e.g. Microsoft Internet Information Server) for Client
Authentication

Sign Microsoft Word macros

Encrypt files and folders

Secure network connections
Start  All Programs  Infineon Security Platform Solution 
Help
P1 Quick Launch Key Utility
If you select Quick Btn in BIOS Setup program on the P1 Function item under
the Advanced menu (see chapter 5 for details), you can use the quick launch
key utility that allows you to define the P1 quick launch key.
To start the utility, right-click the GETAC utility icon (
) and select Quick
Buttons Definition on the Windows system tray. The Quick Button Definition
window appears as shown next.
Box
Cancel
Open
Defining the buttons:
The box in the window represents the user-definable button.
To assign a program to a button, click the Open
icon to pop up the
Select a File to Open dialog box as shown next and select the desired
program. Then, click Open to complete the process.
The appropriate icon will then appear in the box. To launch the program,
press the P1 quick launch key, or, if the Quick Button Definition window is
open, click the box containing the icon.
Chapter 7
Caring for the
Computer
Taking good care of your computer will ensure a trouble-free operation and
reduce the risk of damage to your computer.
This chapter gives you guidelines covering areas such as protecting, storing,
cleaning, and traveling.
Protecting the Computer
To safeguard the integrity of your computer data as well as the computer
itself, you can protect the computer in several ways as described in this
section.
Using the Windows Security Center
Windows Security Center protects your computer against intrusion.
Windows Security Center alerts you to take action on the following security
essentials:

Windows Firewall

Windows Update

Malware Protection (anti-virus, anti-spyware)

Others (Internet security, user account control)
For detailed information on Windows Security Center, see Windows’ Help.
Using the Cable Lock
You can use a Kensington-type cable lock to protect your computer against
theft. The cable lock is available in most computer stores.
To use the lock, loop the lock cable around a stationary object such as a
table. Insert the lock to the Kensington lock hole and turn the key to secure
the lock. Store the key in a safe place.
Taking Care of the Computer
Location Guidelines

For optimal performance, use the computer where the recommended
temperature is between 0 C (32 F) and 55 C (131 F) – actual operating
temperature depending on product specifications.

Avoid placing the computer in a location subject to high humidity,
extreme temperatures, mechanical vibration, direct sunlight, or heavy
dust.

Do not cover or block any ventilation openings on the computer. For
example, do not place the computer on a bed, sofa, rug, or other similar
surface. Otherwise, overheating may occur that results in damage to the
computer.

Keep the computer at least 13 cm (5 inches) away from electrical
appliances that can generate a strong magnetic field such as a TV,
refrigerator, motor, or a large audio speaker.

Avoid moving the computer abruptly from a cold to a warm place. A
temperature difference of more than 10 C (18 F) may cause
condensation inside the unit, which may damage the storage media.

Do not place the computer on an unsteady surface.
General Guidelines

Do not place heavy objects on top of the computer when it is closed as
this may damage the display.

The screen surface is easily scratched. Do not use paper towels to clean
the display but use the included soft cloth. Avoid touching it with your
fingers, pen, or pencil.

To maximize the life of the backlight in the display, allow the backlight
to automatically turn off as a result of power management. Avoid using
a screen saver or other software that prevents the power management
from working.
Cleaning Guidelines

Never clean the computer with its power on.

Use a soft cloth moistened with water or a non-alkaline detergent to
wipe the exterior of the computer.

Gently wipe the display with a soft, lint-free cloth. Do not use alcohol or
detergent on the display.

Dust or grease on the touchpad can affect its sensitivity. Clean the pad
by using adhesive tape to remove the dust and grease on its surface.
Battery Pack Guidelines

Recharge the battery pack when it is nearly discharged. When
recharging, make sure that the battery pack is fully charged. Doing so
may avoid harm to the battery pack.

The battery pack is a consumable product and the following conditions
will shorten its life:
– when frequently charging the battery pack
– when using, charging, or storing the battery in high temperature
condition

To avoid hastening the deterioration of the battery pack thereby
prolonging its useful life, minimize the number of times you charge it so
as not to frequently increase its internal temperature.

Charge the battery pack between 10 C ~ 30 C (50 F ~ 86 F)
temperature range.
A higher environment temperature will cause the battery pack’s
temperature to rise. Avoid charging the battery pack inside a closed
vehicle and in hot weather condition.
Also, charging will not start if the battery pack is not within the allowed
temperature range.

It is recommended that you do not charge the battery pack more than
once a day.

It is recommended that you charge the battery pack with the computer’s
power off.

To maintain the battery pack’s operating efficiency, store it in a cool
dark place removed from the computer and with 30 % ~ 40 % charge
remaining.

Important guidelines when using the battery pack.
When installing or removing the battery pack take note of the
following:
– avoid installing or removing the battery pack when the computer is
in Sleep mode. Abruptly removing the battery pack may cause loss
of data or the computer may become unstable.
– avoid touching the battery pack terminals or damage may occur,
thereby causing improper operation to it or the computer.
The computer’s input voltage and surrounding temperature will directly
affect the battery pack’s charge and discharge time:
– charging time will be prolonged when the computer is turned on.
To shorten the charging time, it is recommended that you place the
computer in sleep or hibernation mode.
– a low temperature will prolong the charging time as well as hasten
the discharge time.
Touchscreen Guidelines

Use the finger or the included touchscreen pen on the display. Using a
sharp or metallic object other than your finger or touchscreen pen may
cause scratches and damage the display, thereby causing errors.

Avoid using excessive force that may cause damage to the display.

Use a soft cloth to remove dirt on the display. The touchscreen surface
has a special protective coating that prevents dirt from sticking to it. Not
using a soft cloth may cause damage to the special protective coating on
the touchscreen surface.
To remove hard to remove dirt, blow some steam on the particular area
and gently wipe away using a soft cloth.

Turn off the computer power when cleaning the display. Cleaning the
display with the power on may cause improper operation.

Use the touchscreen within the intended area only. The display area and
touchscreen operating area is the same. Using it beyond the allowed
area may cause damage to the display and result in improper operation.

Do not use excessive force on the display. Avoid moving the computer
while holding the display or twisting the display. Avoid placing objects
on top of the display as this may cause the glass to break thereby
damaging the display.

Using the touchscreen during low temperature (less than 5 oC) may cause
a slower response time, this is normal. A normal response time may be
restored upon returning to room temperature.

When there is noticeable discrepancy in the operation of the
touchscreen function (wrong location on intended operation or
improper display resolution), refer to the Windows online Help for
instructions on recalibrating the touchscreen display.
When Traveling

Before traveling with your computer, make a backup of your hard disk
data into flash disks or other storage devices. As an added precaution,
bring along an extra copy of your important data.

Make sure that the battery pack is fully charged.

Make sure that the computer is turned off and the top cover is securely
closed.

Make sure that all the connector covers are closed completely to ensure
the waterproof integrity.

Do not leave objects in between the keyboard and closed display.

Disconnect the AC adapter from the computer and take it with you. Use
the AC adapter as the power source and as a battery-charger.

Hand-carry the computer. Do not check it in as luggage.

If you need to leave the computer in the car, put it in the trunk of the car
to avoid exposing the computer to excessive heat.

When going through airport security, it is recommended that you send
the computer and flash disks through the X-ray machine (the device you
set your bags on). Avoid the magnetic detector (the device you walk
through) or the magnetic wand (the handheld device used by security
personnel).

If you plan to travel abroad with your computer, consult your dealer for
the appropriate AC power cord for use in your country of destination.
Chapter 8
Troubleshooting
Computer problems can be caused by hardware, software, or both. When
you encounter any problem, it might be a typical problem that can easily be
solved.
This chapter tells you what actions to take when solving common computer
problems.
Preliminary Checklist
Here are helpful hints to follow before you take further actions when you
encounter any problem:

Try to isolate which part of the computer is causing the problem.

Make sure that you turn on all peripheral devices before turning on the
computer.

If an external device has a problem, make sure that the cable
connections are correct and secure.

Make sure that the configuration information is properly set in the BIOS
Setup program.

Make sure that all the device drivers are correctly installed.

Make notes of your observations. Are there any messages on the screen?
Do any indicators light? Do you hear any beeps? Detailed descriptions
are useful to the service personnel when you need to consult one for
assistance.
If any problem persists after you follow the instructions in this chapter,
contact an authorized dealer for help.
Solving Common Problems
Battery Problems
The battery does not charge (Battery Charge indicator does not light
amber).

Make sure that the AC adapter is properly connected.

Make sure that the battery is not too hot or cold. Allow time for the
battery pack to return to room temperature.

Make sure that the battery pack is installed correctly.

Make sure that the battery terminals are clean.
The operating time of a fully charged battery becomes shorter.

If you often partially recharge and discharge, the battery might not be
charged to its full potential. Initialize the battery to solve the problem.
(See “Initializing the Battery Pack” in Chapter 3 for instructions.)
The battery operating time indicated by the battery meter does not
match the actual operating time.

The actual operating time can be different from the estimated time,
depending on how you are using the computer. If the actual operating
time is much less than the estimated time, initialize the battery. (See
“Initializing the Battery Pack” in Chapter 3 for instructions.)
Bluetooth Wireless Transmission Problems
I cannot connect to another device with Bluetooth wireless
technology.

Make sure that the Bluetooth wireless card is correctly installed.

Make sure that both devices have activated Bluetooth feature.

Make sure that the distance between the two devices are not over 10
meters or that there are no walls or other obstructions between the
devices.

Make sure that the other device is not in “Hidden” mode.

Make sure that both devices are compatible.
Display Problems
Nothing appears on the screen.

During operation, the screen may automatically turn off as a result of
power management. Press any key to see if the screen comes back.

The brightness level might be too low. Increase brightness by pressing
the Fn+F7 hot key.

The display output might be set to an external device. To switch the
display back to the LCD, press the Fn+F5 hot key or change the display
through the Display Settings Properties.
The characters on the screen are dim.

Adjust the brightness and/or contrast.
Bad dots appear on the display at all times.

A small number of missing, discolored, or bright dots on the screen are
an intrinsic characteristic of TFT LCD technology. It is not regarded as a
LCD defect.
The external monitor displays nothing.

Make sure that the monitor is turned on.

Make sure that the monitor’s signal cable is properly connected.

Switch the display to the monitor by pressing the Fn+F5 hot key or
change the display through the Display Settings Properties.
Simultaneous display/multi-display does not work.

Make sure that you turn on the external monitor before turning on the
computer.

Press the Fn+F5 hot key to toggle through the display options or change
the Display Settings Properties in Windows.
ExpressCard Problems
The ExpressCard does not work.

Make sure that the ExpressCard is correctly seated.

If the card requires an IRQ (Interrupt ReQuest), make sure that there is
one available.
The ExpressCard stops communicating properly.

The application may have been reset when the computer is turned off or
in Sleep mode. Exit and restart the application.
Hardware Device Problems
The computer does not recognize a newly installed device.

The device may not be correctly configured in the BIOS Setup program.
Run the BIOS Setup program to identify the new type.

Make sure if any device driver needs to be installed. (Refer to the
documentation that came with the device.)

Make sure if the device needs any jumper or switch settings. (Refer to
the documentation that came with the device.)

Check the cables or power cords for correct connections.

For an external device that has its own power switch, make sure that the
power is turned on.
Hard Disk Drive Problems
The hard disk drive error message appears on the screen.

The hard disk drive has defects. Ask your dealer for help.
The hard disk drive operations seem slow.

The data files stored on the hard disk drive may be fragmented. Use a
tool such as Window’s Disk Defragmenter to defragment the files.
The hard disk drive in-use indicator glows without blinking.

The data files stored on the hard disk drive may be fragmented. Use a
tool such as Window’s Disk Defragmenter to defragment the files.
Keyboard, Mouse, and Touchpad Problems
The keyboard does not respond.

Try connecting an external keyboard. If it works, contact an authorized
dealer, as the internal keyboard cable might be loose.
The numeric keypad is disabled.

Make sure that the Num Lock is switched on. (Check if the Num Lock
Indicator
glows or not.)
The external keyboard does not work.

Make sure that the keyboard cable is properly connected.
The USB mouse does not work.

Make sure that the mouse cable is properly connected.
The touchpad does not work, or the pointer is difficult to control
with the touchpad.

Make sure that the touchpad is clean.
LAN Problems
I cannot access the network.

Make sure that the LAN cable is properly connected to the RJ-45
connector and the network hub.

Make sure that the network configuration is appropriate.

Make sure that the user name or password is correct.
WLAN Problems
I cannot use the WLAN feature.

Make sure that the mini PCI-E WLAN card is correctly installed.

Make sure that the WLAN feature is turned on.
Transmission quality is poor.

Your computer may be in an out-of-range situation. Move your
computer closer to the Access Point or another WLAN device it is
associated with.

Check if there is high interference around the environment and solve the
problem as described next.
Radio interference exists.

Move your computer away from the device causing the radio
interference such as microwave oven and large metal objects.

Plug your computer into an outlet on a different branch circuit from that
used by the affecting device.

Consult your dealer or an experienced radio technician for help.
I cannot connect to another WLAN device.

Make sure that the WLAN feature is turned on.

Make sure that the SSID setting is the same for every WLAN device in the
network.

Your computer is not recognizing changes. Restart the computer.

Make sure that the IP address or subnet mask setting is correct.
I cannot communicate with the computer in the network when
Infrastructure mode is configured.

Make sure that the Access Point your computer is associated with is
powered on and all the LEDs are working properly.

If the operating radio channel is in poor quality, change the Access Point
and all the wireless station(s) within the BSSID to another radio channel.

Your computer may be in an out-of-range situation. Move your
computer closer to the Access Point it is associated with.

Make sure that your computer is configured with the same security
option (encryption) to the Access Point.

Use the Web Manager/Telnet of the Access Point to check whether it is
connected to the network.

Reconfigure and reset the Access Point.
I cannot access the network.

Make sure that the network configuration is appropriate.

Make sure that the user name or password is correct.

You have moved out of range of the network.

Turn off power management.
Modem Problems
The modem does not work.

Make sure that the telephone line is properly connected.

Make sure that the COM port in the communication software is correctly
set.

Turn off power management.
Optical Drive Problems
The optical drive cannot read a disc.

Make sure that the disc is correctly seated in the tray, with the label
facing up.

Make sure that the disc is not dirty. Clean the disc with a disc cleaning
kit, available in most computer stores.

Make sure that the computer supports the disc or the files contained.
You cannot eject a disc.
The disc is not properly seated in the drive. Manually release the disc
following the method described next:
1. Turn off the computer.
2. Open the media bay cover by sliding the release latch towards the left.
3. Insert a small rod, such as a straightened paperclip, into the drive’s
manual eject hole and push firmly to release the tray.
4. Pull the tray out until fully extended, and then remove the disc.
PC Card Problems
The PC card does not work.

Make sure that the PC card is correctly seated.

If the card requires an IRQ (Interrupt ReQuest), make sure that there is
one available.
The PC card stops communicating properly.

The application may have been reset when the computer is turned off or
in Sleep mode. Exit and restart the application.
Power Management Problems
The computer does not enter Sleep or Hibernation mode
automatically.

If you have a connection to another computer, the computer does not
enter Sleep or Hibernation mode if the connection is actively in use.

Make sure that the Sleep or Hibernation time-out is enabled.
The computer does not enter Sleep or Hibernation mode
immediately.

If the computer is performing an operation, it normally waits for the
operation to finish.
The computer does not resume from Sleep or Hibernation mode.

The computer automatically enters Sleep or Hibernation mode when the
battery pack is empty. Do any one of the following:
 Connect the AC adapter to the computer.
 Replace the empty battery pack with a fully charged one.
The computer does not enter Hibernation mode with the Fn+F12 hot
keys.

Make sure that the Hibernation function is specified for the sleep
button.

You might be using a PC card that prevents the computer from entering
Hibernation mode. To enter the mode, stop the communication program
and then remove the card or stop the card.
Software Problems
An application program does not work correctly.

Make sure that the software is correctly installed.

If an error message appears on the screen, consult the software
program’s documentation for further information.

If you are sure the operation has stop, reset the computer. (See
“Resetting the Computer” later in this chapter.)
Sound Problems
No sound is produced.

Make sure that the volume control is not set too low.

Make sure that the computer is not in Sleep mode.

If using an external speaker, make sure that the speaker is properly
connected.
Distorted sound is produced.

Make sure that the volume control is not set too high or too low. In most
cases, a high setting can cause the audio electronics to distort the sound.
The sound system does not record.

Adjust the playback or recording sound levels.
The external microphone or audio device does not work.

Make sure that the microphone is connected to the proper connector on
the computer.

Click the speaker symbol on the taskbar and check the Windows volume
control.

Check the volume control of your computer.
Startup Problems
When you turn on the computer, it does not respond and the Power
Indicator does not light green.

If you are using an external AC power, make sure that the AC adapter is
correctly and securely connected. If so, make sure that the electrical
outlet works properly.

If you are using the battery power, make sure that the battery is not
discharged.
When you turn on the computer, it stops after POST.

Restart your computer.
Other Problems
The date/time is incorrect.

Correct the date and time via the operating system or BIOS Setup
program.

After you have performed everything as described above and still have
the incorrect date and time every time you turn on the computer, the
RTC (Real-Time Clock) battery is at the end of its life. Call an authorized
dealer to replace the RTC battery.
Resetting the Computer
You may have to reset (reboot) your computer on some occasions when an
error occurs and the program you are using hangs up.
If the computer operation seems to hang up, first wait. It is possible that the
computer is processing data. Periodically check the hard disk drive in-use
indicator, if it flashes irregularly, the program may be accessing data and
preventing you from using the keyboard. If you are sure the operation has
stopped and you cannot use the “restart” function of the operating system,
reset the computer.
Reset the computer by any one of these methods:

Press Ctrl+Alt+Del on your built-in keyboard.

If the above action does not work, turn off the computer with the power
button. Wait for at least five seconds and turn it on again.
Appendix A
Specifications
Parts
CPU
Chipset
Specifications
Intel® Core™ 2 Duo Merom processor LV L7300/LV7500
800 MHz FSB (Front Side Bus), 1.4/1.6 GHz, 4 MB L2 cache
thermal specifications 17 W
NorthBridge
Intel® GM965, dual channel support
SouthBridge
Intel® ICH8M
BIOS
1 MB EEPROM, ACPI, fingerprint / smart card security, TPM
RAM (system)
Up to 4 GB DDRII 533/667 MHz, 2 × 200-pin SO-DIMM sockets
1.25-inch height
Display
Panel
13.3-inch (4:3) wide TFT LCD, resolution up to 1024× 768 XGA
with touchscreen (option), or
with sunlight-readable and touchscreen 1200 nits (option)
Video controller
UMA
VRAM
Up to 384 MB (depends on BIOS setting)
Video port
Analog VGA
Features
Azalia interface, 2 channel analog output, internal microphone
Speaker
1.5 watt (8 ohm) stereo × 2
Ports
Two audio ports for Line-out (green color) / Mic-in (pink color)
Audio
Keyboard
Standard keys with numeric pad keys, 12 function keys, special
Fn (Function) key and Windows keys
with water-proof membrane or backlight (option)
Pointing device
Glide touchpad with 2 buttons, scroll bar
Storage
device
Hard disk drive
SATA interface, 2.5-inch diameter (9.5 mm height), 5400 rpm
support, G-sensor, shock-mounted, user-removable,
solid-state disk (option), automotive hard disk drive (option),
low temperature – 4 oF (– 20 oC) up to 131 oF (55 oC) (option)
Optical drive
DVD Combo / DVD Dual / Super-Multi
Parts
Specifications
Card slots
Card Reader 4-in-1 (MMC/SD/MS/MS PRO card) module
PCMCIA CardBus Type II × 2 or 1 with any of the following:
ExpressCard/34 / ExpressCard/54 support, or
Smart Card
I/O ports
USB ports × 3 (USB 2.0 support), serial port × 2 (RS-232), RJ-45
port, RJ-11 port, mini IEEE 1394a port, expansion bus connector
Modem
Azalia interface, 56 Kbps, V.90 MDC 1.5 internal fax modem
LAN
10/100/1000 Mbps
Wireless LAN
One mini PCI-E slot for wireless LAN card, compliant with
IEEE 802.11a/b/g/n, on/off slide switch
Bluetooth wireless
Specification 2.0 module, on/off slide switch
technology
GPS (option)
GPS module
3G (option)
CDMA EVDO, external accessible SIM card slot
Security
Kensington lock
TPM 1.2
Fingerprint sensor
Smart Card Reader (integrated) will occupy Type II PCMCIA slot –
option
Power
AC adapter
Universal AC adapter 90 W; input: 100240 V, output: 19 V
Primary battery
Li-ion smart battery 9-cell 7650 mAH / 11.1 V or above
Secondary
battery
Li-ion smart battery 9-cell 7650 mAH / 11.1 V or above
Dimension (W×D)
303.5× 298× 60 mm (11.9× 11.7× 2.36 inch) with handle
Weight
3.5 kg (7.7 lb)
Appendix B
Regulatory
Information
This appendix provides regulatory statements and safety notices on your
computer.
On the Use of the System
Class B Regulations
USA
Federal Communications Commission Radio Frequency Interference
Statement
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.
Please note:
The use of a non-shielded interface cable with this equipment is prohibited.
Canada
Canadian Department of Communications
Radio Interference Regulations Class B Compliance Notice
This Class B digital apparatus meets all requirements of the Canada
Interference-Causing equipment regulations.
Cet appareil numérique de Classe B respecte toutes les exigences du
Règlement Canadien sur le matériel brouileur.
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques de la classe B
prescrites dans le Règlement sur le brouillage radioélectrique édicté par le
ministère des Communications du Canada.
Safety Notices
About the Battery
Caution Texts Concerning Lithium Batteries
DANISH
ADVARSEL! Lithiumbatteri – Eksplosionsfare ved fejlagtig håndtering.
Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det
brugte batteri tilbage til leverandø ren.
NORWEGIAN
ADVARSEL: Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme
batteritype eller en tilsvarende type anbefalt av apparatfabrikanten. Brukte
batterier kasseres i henhold til fabrikantens instruksjoner.
SWEDISH
VARNING: Explosionsfara vid felaktigt batteribyte. Använd samma
batterityp eller en ekvivalent typ som rekommenderas av
apparattillverkaren. Kassera använt batteri enligt fabrikantens instruktion.
FINNISH
VAROITUS: Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda
paristo ainoastaan valmistajan suosittelemaan tyyppiin. Hävitä käytetty
paristo valmistajan ohjeiden mukaisesti.
ENGLISH
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type recommended by the equipment
manufacturer. Discard used batteries according to manufacturer's
instructions.
DEUTSCH
VORSICHT: Explosionsgefahr bei unsachgemäß em Austausch der Batterie.
Ersatz nur durch denselben oder einen vom Hersteller empfohlenen
gleich-wertigen Typ. Entsorgung gebrauchter Batterien nach Angaben des
Herstellers.
FRENCH
ATTENTION: II y a danger d’explosion s’il y a remplacement incorrect de la
batterie. Remplacer uniquement avec une batterie du même type ou d’un
type équivalent recommandé par le constructeur. Mettre au rebut les
batteries usagées conformément aux instructions du fabricant.
Attention (for USA Users)
The product that you have purchased contains a rechargeable battery. The
battery is recyclable. At the end of its useful life, under various state and
local laws, it may be illegal to dispose of this battery into the municipal
waste stream. Check with your local solid waste officials for details in your
area for recycling options or proper disposal.
About the AC Adapter

Use only the AC adapter supplied with your computer. Use of another
type of AC adapter will result in malfunction and/or danger.

Do not use the adapter in a high moisture environment. Never touch the
adapter when your hands or feet are wet.

Allow adequate ventilation around the adapter when using it to operate
the device or charge the battery. Do not cover the AC adapter with
paper or other objects that will reduce cooling. Do not use the AC
adapter while it is inside a carrying case.

Connect the adapter to a proper power source. The voltage
requirements are found on the product case and/or packaging.

Do not use the adapter if the cord becomes damaged.

Do not attempt to service the unit. There are no serviceable parts inside.
Replace the unit if it is damaged or exposed to excess moisture.
About the Modem
Caution

Never install telephone wiring during a lightning storm.

Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.

Never touch non-insulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.

Use caution when installing or modifying telephone lines.

Avoid using the telephone function (other than a cordless type) during
an electrical storm. There may be a remote risk of electric shock from
lightning.

Do not use the telephone function to report a gas leak in the vicinity of
the leak.

Do not use this product near water, for example near a bathtub, wash
bowl, kitchen sink or laundry tub, in a wet basement or near a swimming
pool.
Caution (for USA Users)
To reduce the risk of fire, use only No.26 AWG or larger telecommunication
line cord.
On the Use of the RF Device
USA and Canada Safety Requirements and
Notices
IMPORTANT NOTE: To comply with FCC RF exposure compliance
requirements, the antenna used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not
be co-located or operating in conjunction with any other antenna or
transmitter.
Radio Frequency Interference Requirements and SAR
The FCC with its action in ET Docket 93-62 has adopted a safety standard for
human exposure to Radio Frequency (RF) electromagnetic energy emitted by
FCC certified equipment. The wireless LAN module meets the Human
Exposure limits found in OET Bulletin 65, 2001, and ANSI/IEEE C95.1, 1992.
Proper operation of this radio according to the instructions found in this
manual will result in exposure substantially below the FCC’s recommended
limits. The following safety precautions should be observed:

Do not touch or move antenna while the unit is transmitting or
receiving.

Do not hold any component containing the radio such that the antenna
is very close or touching any exposed parts of the body, especially the
face or eyes, while transmitting.

Do not operate the radio or attempt to transmit data unless the antenna
is connected; if not, the radio may be damaged.
Use in specific environments:

The use of wireless devices in hazardous locations is limited by the
constraints posed by the safety directors of such environments.
EMC Requirements
This device uses, generates and radiates radio frequency energy. The radio
frequency energy produced by this device is well below the maximum
exposure allowed by the Federal Communications Commission (FCC).
This device complies with the limits for a Class B digital device pursuant to
Part 15 subpart C of the FCC Rules and Regulations. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
The FCC limits are designed to provide reasonable protection against
harmful interference when the equipment is installed and used in
accordance with the instruction manual and operated in a commercial
environment. However, there is no guarantee that interference will not
occur in a particular commercial installation, or if operated in a residential
area.
If harmful interference with radio or television reception occurs when the
device is turned on, the user must correct the situation at the user’s own
expense. The user is encouraged to try one or more of the following
corrective measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.
CAUTION: The Part 15 radio device operates on a non-interference basis with
other devices operating at this frequency. Any changes or modification to
said product not expressly approved by the manufacturer could void the
user’s authority to operate this device.
Canada Radio Frequency Interference Requirements
To prevent radio interference to the licensed service, this device is intended
to be operated indoors and away from windows to provide maximum
shielding. Equipment (or its transmit antenna) that is installed outdoors is
subject to licensing.
Pour empêcher que cet appareil cause du brouillage au service faisant l'objet
d'une licence, il doit être utilisé à l'intérieur et devrait être placé loin des
fenêtres afin de fournir un écran de blindage maximal. Si le matériel (ou son
antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une
licence.
European Union CE Marking and Compliance
Notices
Statements of Compliance
English
This product follows the provisions of the European Directive 1999/5/EC.
Danish
Dette produkt er i overensstemmelse med det europæ iske direktiv
1999/5/EC.
Dutch
Dit product is in navolging van de bepalingen van Europees Directief
1999/5/EC.
Finnish
Tämä tuote noudattaa EU-direktiivin 1999/5/EC määräyksiä.
French
Ce produit est conforme aux exigences de la Directive Européenne
1999/5/EC.
German
Dieses Produkt entspricht den Bestimmungen der Europäischen Richtlinie
1999/5/EC.
Greek
To προϊόν αυτό πληροί τις προβλέψεις της Ευρωπαϊκής Οδηγίας 1999/5/EC.
Icelandic
Þessi vara stenst reglugerð Evró pska Efnahags Bandalagsins nú mer
1999/5/EC.
Italian
Questo prodotto è conforme alla Direttiva Europea 1999/5/EC.
Norwegian
Dette produktet er i henhold til bestemmelsene i det europeiske direktivet
1999/5/EC.
Portuguese
Este produto cumpre com as normas da Diretiva Européia 1999/5/EC.
Spanish
Este producto cumple con las normas del Directivo Europeo 1999/5/EC.
Swedish
Denna produkt har tillverkats i enlighet med EG-direktiv 1999/5/EC.
Local Restrictions of 802.11a/g/n Radio Usage
CAUTION: Due to the fact that the frequencies used by 802.11a/g/n wireless
LAN devices may not yet be harmonized in all countries, 802.11a/g/n
products are designed for use only in specific countries or regions, and is not
allowed to be operated in countries or regions other than those of
designated use. As a user of these products, you are responsible for ensuring
that the products are used only in the countries or regions for which they
were intended and for verifying that they are configured with the correct
selection of frequency and channel for the country or region of use. Any
deviation from permissible settings and restrictions in the country or region
of use could be an infringement of local law and may be punished as such.
The European variant is intended for use throughout the European
Economic Area. However, authorization for use is further restricted in
particular countries or regions within countries, as follows:
General
European standards dictate maximum radiated transmit power of
100 mW Effective Isotropic Radiated Power (EIRP) and the frequency range
2400 – 2483.5 MHz.
Belgium and the Netherlands
In Belgium and the Netherlands, the product may not be used outdoors. See
the instructions next under the heading “Turning Off the Wireless LAN
Radio.”
France
Departments in Which the Wireless LAN Module Can Be Used (Indoors Only)
The wireless LAN module can currently be used indoors only in the following
38 departments of mainland France. Please turn off your wireless LAN radio
when operating the device in areas/places other than the 38 departments
listed:
01
Ain Orientales
36
Indre
66 Pyrénées
02
Aisne
37
Indre et Loire
67 Bas Rhin
03
Allier
41
Loir et Cher
68 Haut Rhin
05
Hautes Alpes
42
Loire
70 Haute Saô ne
08
Ardennes
45
Loiret
71 Saô ne et Loire
09
Ariège
50
Manche
75 Paris
11
Aude
55
Meuse
82 Tarn et Garonne
12
Aveyron
58
Nièvre
84 Vaucluse
16
Charente
59
Nord
88 Vosges
24
Dordogne
60
Oise
89 Yonne
25
Doubs
61
Orne
90 Territoire de
Belfort
26
Drô me
63
Puy du Dô me
94 Val de Marne
32
Gers
64
Pyrénées
Atlantique
Departments in Which the Wireless LAN Module’s Maximum EIRP Not Shown
in the Previous Table
Frequency Ranges
(MHz)
Indoors
Outdoors
2400 – 2446.5
10 mW
Not permitted
2446.5 – 2483.5
100 mW
100 mW on private property with
Ministry of Defense approval
Turning Off the Wireless LAN Radio
NOTE: Turning the wireless LAN radio off is not the same as disabling the
wireless LAN card. It is not necessary to disable the card to meet the
regulatory requirements.
While operating the computer in those French departments that do not
allow use of the wireless LAN equipment, the user of the equipment must
turn off the wireless LAN radio in order to comply with local regulations (see
Chapter 2 for more information).

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
Tagged PDF                      : Yes
Page Mode                       : UseOutlines
XMP Toolkit                     : 3.1-702
Create Date                     : 2009:04:15 10:15:03Z
Creator Tool                    : Microsoft® Office Word 2007
Modify Date                     : 2009:09:09 09:20:29-04:00
Metadata Date                   : 2009:09:09 09:20:29-04:00
Format                          : application/pdf
Description                     : User's Manual (EN)
Creator                         : Samuel Yu
Title                           : IBU Notebook
Producer                        : Microsoft® Office Word 2007
Document ID                     : uuid:8d7605f4-bfce-486a-b44c-dde4059e45b2
Instance ID                     : uuid:c8f997b5-659d-43da-a52f-4a1734696dc2
Page Count                      : 152
Language                        : zh-TW
Subject                         : User's Manual (EN)
Author                          : Samuel Yu
EXIF Metadata provided by EXIF.tools
FCC ID Filing: MAU304

Navigation menu