Getac Technology EA01 NOTEBOOK PC User Manual E100 English Manual 00

Getac Technology Corporation NOTEBOOK PC E100 English Manual 00

Contents

USERS MANUAL

Download: Getac Technology EA01 NOTEBOOK PC User Manual E100 English Manual 00
Mirror Download [FCC.gov]Getac Technology EA01 NOTEBOOK PC User Manual E100 English Manual 00
Document ID1308113
Application IDSWSak96AJp4/om3idLc/cA==
Document DescriptionUSERS MANUAL
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize204.25kB (2553134 bits)
Date Submitted2010-07-07 00:00:00
Date Available2010-07-13 00:00:00
Creation Date2010-05-04 19:38:53
Producing SoftwareAcrobat Distiller 8.1.0 (Windows)
Document Lastmod2010-06-25 13:35:30
Document TitleMicrosoft Word - E100 English Manual 00.doc
Document CreatorPScript5.dll Version 5.2
Document Author: jeffrey.cheng

E100
USER’S MANUAL
Rugged Mobile Computing Solutions
Jan. 2010
TRADEMARKS
All brand and product names are trademarks or registered trademarks of
their respective companies.
NOTE
The information in this manual is subject to change without notice.
For the latest version of the manual, please visit the Getac website at
www.getac.com.
Table of Contents
Chapter 1
Getting Started ..............................................................................................................1-1
Getting the Tablet PC Running .............................................1-2
Unpacking ............................................................................1-2
Connecting to AC Power ..................................................1-3
Using the Hand Strap ..........................................................1-6
Turning On and Off the Tablet PC ....................................1-7
Taking a Look at the Tablet PC .............................................1-8
Front Components ..............................................................1-8
Rear Components.............................................................1-10
Right-Side Components ...................................................1-11
Left-Side Components......................................................1-11
Top Components ..............................................................1-12
Bottom Components........................................................1-13
Chapter 2
Operating Your Tablet PC......................................................................................... 2-1
Starting and Stopping the Tablet PC ...................................2-2
Starting the Tablet PC.........................................................2-2
Stopping the Tablet PC ......................................................2-2
Using the Keypad ....................................................................2-4
Numeric Keypad with Secondary Functions ..................2-4
Cursor-Control Keys with Secondary Functions..............2-5
Using the On-screen Keyboard .............................................2-6
Using the Touchscreen Pen....................................................2-7
Using the Quick Buttons ..........................................................2-9
Using the Video Features......................................................2-10
Configuring the Display Modes ......................................2-10
Boot Menu............................................................................5-8
Exit Menu ..............................................................................5-9
System Recovery ...................................................................5-10
Chapter 6
Using Special Utilities ..............................................................................................6-1
Using TPM (Trusted Platform Module) ...................................6-2
Using the OSD Control Panel .................................................6-3
Quick Button Setup Utility...................................................6-7
Using the G-Manager Utility .................................................6-10
Starting G-Manager..........................................................6-10
System Tab .........................................................................6-11
Battery Tab .........................................................................6-12
Light Sensor Tab.................................................................6-15
ECO Tab..............................................................................6-16
Ignition Tab.........................................................................6-18
Monitoring Tab...................................................................6-19
Antenna Tab ......................................................................6-21
GPS Status Tab...................................................................6-22
Chapter 7
Caring for the Tablet PC ............................................................................................7-1
Protecting the Tablet PC........................................................7-2
Using the Cable Lock .........................................................7-2
Taking Care of the Tablet PC ................................................7-3
Location Guidelines............................................................7-3
General Guidelines.............................................................7-3
Cleaning Guidelines ...........................................................7-4
Battery Pack Guidelines.....................................................7-4
Touchscreen Guidelines.....................................................7-5
When Traveling ........................................................................7-7
Chapter 8
Troubleshooting ..........................................................................................................8-1
Preliminary Checklist ...............................................................8-2
Solving Common Problems....................................................8-3
Battery Problems .................................................................8-3
iii
Bluetooth Wireless Transmission Problems .......................8-3
Display Problems .................................................................8-4
Hardware Device Problems ..............................................8-4
Hard Disk Drive Problems ...................................................8-5
LAN Problems.......................................................................8-5
Wireless LAN Problems ........................................................8-5
Power Management Problems.........................................8-7
Software Problems ..............................................................8-8
Sound Problems...................................................................8-8
Startup Problems .................................................................8-9
Other Problems....................................................................8-9
Resetting the Tablet PC ........................................................8-11
Appendix A Specifications ...................................................................................................................... A-1
Appendix B Regulatory Information ...................................................................................................B-1
On the Use of the System .......................................................B-2
Class B Regulations .............................................................B-2
Safety Notices......................................................................B-3
On the Use of the RF Device..................................................B-6
USA and Canada Safety Requirements and Notices ...B-6
European Union CE Marking and Compliance NoticesB-9
iv
Chapter 1
Getting Started
Congratulations on purchasing this rugged tablet PC.
This chapter first tells you step by step how to get the tablet PC up and
running. Then, you will find a section briefly introducing the external
components of the tablet PC.
Getting Started
1-1
Getting the Tablet PC Running
This section guides you through the procedures for getting the tablet PC
ready for operation.
Unpacking
After unpacking the shipping carton, you should find these standard
items:
Notebook tablet PC
Accessories:
− AC adapter
− AC power cord
− Hand strap
− Screen protector film (already attached to the screen)
− Touchscreen pen
Inspect all the items. If any item is damaged or missing, notify your dealer
immediately.
Keep the shipping carton and packing materials in case you need to ship
or store the tablet PC in the future.
1-2
Getting Started
Connecting to AC Power
The tablet PC operates either on the external AC power or internal battery
power. It is suggested that you use AC power when you start up the tablet
PC for the very first time.
CAUTION: Use only the AC adapter included with your tablet PC. Using other AC
adapters may damage the tablet PC.
1. Make sure that the tablet PC is turned off.
2. Place the tablet PC upside down.
3. Lift the latch handle of the battery cover and turn it counterclockwise
to the unlock position. Then, detach the cover from the tablet PC.
Unlock
position
Getting Started
1-3
4. Fit the battery pack into place (n). Tightening the two screws (o) is
optional. The lack of the screws will not affect the rugged and
waterproof feature of the tablet PC.
5. Replace the battery cover and turn the latch clockwise to the lock
position.
Lock
position
1-4
Getting Started
6. Plug the DC cord of the AC adapter to the power connector (
) of
the tablet PC (n). Plug the female end of the AC power cord to the
AC adapter and the male end to an electrical outlet (o).
7. Power is being supplied from the electrical outlet to the AC adapter
and onto your tablet PC. Now, you are ready to turn on the tablet PC.
8. When the AC adapter is connected, it also charges the battery pack.
The Battery Charge Indicator ( ) on the tablet PC glows amber to
indicate that charging is in progress. When the battery is fully charged,
the Battery Charge Indicator glows green. (For information on using
battery power, see Chapter 3.)
CAUTION:
When you disconnect the AC adapter, disconnect from the electrical outlet
first and then from the tablet PC. A reverse procedure may damage the AC
adapter or the tablet PC.
z When unplugging the connector, always hold the plug head. Never pullon the
cord.
Getting Started
1-5
Using the Hand Strap
Align the four hooks of the hand strap with the four corresponding holes
on the tablet PC and tighten the screws.
The hand strap allows you to firmly hold the tablet PC by inserting your
hand through the hand strap.
1-6
Getting Started
Turning On and Off the Tablet PC
Turning On
1. Make sure that the tablet PC is connected to AC power or the battery
has power.
2. Press the power button (
).
3. Each time the tablet PC is turned on, it performs a Power-On Self Test
(POST), and the operating system Windows XP Tablet PC edition should
start (may support Windows Vista Business and Ultimate in the future).
Turning Off
To turn off the tablet PC power, use the “Shut Down” command of your
operating system.
NOTE: There are other ways you can stop thetablet PC so that you will be backto
where you left off when you next turn on the tablet PC. (See “Stopping the Tablet
PC” in Chapter 2 for information.)
CAUTION: If you have to turn the tablet PC on again immediately after turning it
off, wait for at least five seconds. Turning the tablet PC off and on rapidly can
damage it.
Getting Started
1-7
Taking a Look at the Tablet PC
NOTE: Depending on the model you purchased, the appearance of your tablet
PC may not be exactly the same as those shown in this manual.
CAUTION: When not using a connector, make sure that the connector cover is
completely closed to ensure the waterproof integrity of the tablet PC.
Front Components
Ref
Component
Description
See Also
Touchscreen
Displays and receives information for the
tablet PC.
P. 2-7
Power Button
Turns the tablet PC power ON and OFF.
The LED lights green when tablet PC is on.
P. 1-7
Light Sensor
Adjusts the LCD brightness automatically
based on your tablet PC’s surrounding
lighting condition.
1-8
Getting Started
Ref
Component
Quick Buttons
Fn
Description
See Also
Toggles the Fn keylock ON and OFF.
P. 2-9
Toggles the keypad lock ON and OFF by
pressing for three seconds to prevent
accidental pressing of keypad during
transport.
P. 2-9
Menu
Toggles the “OSD Control Panel” utility ON
and OFF.
P. 2-9
Indicators
Show the current status of the tablet PC’s
devices.
WLAN/WWAN
Lights green when WLAN is on.
P. 2-14
Lights amber when WWAN is on.
Battery Charge
P. 3-3
Lights green when the battery is fully
charged.
Lights amber when the battery is being
charged.
Blinks red when the battery’s capacity is
below 10%.
Hard Disk Drive / Lights green when hard disk drive is in use.
Heater (option)
Lights red when optional heater is on
(temperature is lower than 5oC when
booting your tablet PC).
Numeric Keypad
Facilitates entering of numbers, also
includes the Del (Delete) and Ent (Enter)
keys. When Fn keylock is on, the alternative
function of a key is activated. The
alternative functions are identified by the
color of orange on the keytop.
P. 2-4
Getting Started
1-9
Right-Side Components
Ref
Component
Description
See Also
Kensington Lock
Locks the tablet PC to a stationary
object for security.
P. 7-2
Touchscreen Pen
Serves as the input device by tapping
on the touch screen to make
selections and enter information.
P. 2-7
Tether Hole
Touchscreen pen tethered to this
hole.
Left-Side Components
Ref
Component
RJ-45 Connector
Description
Connects the LAN cable.
See Also
P. 2-13
Getting Started
1-11
Ref
Component
Description
USB Ports
Each of the two ports connects a USB
device, such as a USB flash disk,
printer, digital camera, joystick, and
more.
See Also
P. 4-2
Top Components
Ref
Component
Description
Smart Card
Reader
Accepts a smart card for additional
security feature.
Audio Output
Connector
Connects a set of headphones, external
speakers with amplifier, or an audio
recording device.
1-12
Getting Started
See Also
P. 4-3
P. 2-11
Chapter 2
Operating Your Tablet PC
This chapter provides information about the use of the tablet PC.
If you are new to tablet PCs, reading this chapter will help you learn the
operating basics. If you are already a computer user, you may choose to
read only the parts containing information unique to your tablet PC.
CAUTION: The tablet PC can get uncomfortably warm when you use it in high
temperatures. As a safety precaution in such a circumstance, do not place the
tablet PC on your lap or touch it withyour bare hands for extended periodsof time.
Prolonged body contact can cause discomfort and potentially a burn.
Operating Your Tablet PC
2-1
Starting and Stopping the Tablet PC
There are a number of ways to start and stop the tablet PC.
Starting the Tablet PC
You always start the tablet PC using the power button.
A tablet PC starts up with an operating system (OS) existing on the storage
device such as the hard disk. The tablet PC will automatically load the OS
after you turn it on. This process is called booting.
NOTE: An operating system is the platform for all your software application
programs to run on. Your tablet PC uses the Microsoft Windows XP Tablet PC
edition operating system.
Stopping the Tablet PC
When you finish a working session, you can stop the tablet PC by turning
off the power or leaving the tablet PC in Standby or Hibernation mode:
To stop in this
mode...
Off
Do this...
To start up or
resume again
Follow the shutdown procedure of your
operating system. This can prevent loss
of unsaved data or damage to your
software programs.
Press the power
button.
If the system is locked up because of
hardware or software problems, press
the power button to turn off the tablet
PC.
Standby
2-2
Depending on your settings in Windows,
you can place the tablet PC in Standby
mode by pressing the power button.
Operating Your Tablet PC
Press the power
button.
To stop in this
mode...
Do this...
To start up or
resume again
Hibernation
Depending on your settings in Windows,
you can place the tablet PC in
Hibernation mode by pressing the
power button.
Press the power
button.
If you choose to stop in Standby or Hibernation mode, you can return to
where you left off the next time you start up the tablet PC. (See “Power
Management” in Chapter 3 for more information.)
Operating Your Tablet PC
2-3
Using the Keypad
Your keypad can be divided into two major categories:
Numeric, Delete (Del), and Enter (Ent) keys
Cursor-control keys
NOTE: To use the keypad during poor lighting conditions, turn the keypad
backlight ON by pressing the Fn button, then press the “8” (
) button.
Numeric Keypad with Secondary Functions
The 12-key numeric keypad with Delete and Enter keys is shown next:
icon appears on the system tray), you can
When the Fn keylock is ON (
use the following secondary functions with orange color on top of each
button.
switches between landscape and portrait LCD display.
switches the keypad backlight ON and OFF.
switches the touchscreen OFF and ON.
2-4
Operating Your Tablet PC
z
switches the sunlight-readable mode ON and OFF.
serves as the mouse right-click button.
C+A+D serves as the Ctrl+Alt+Del key combination.
ESC serves as the Escape key.
Cursor-Control Keys with Secondary Functions
The word “cursor” refers to the indicator on the screen (except for pointer
on screen) that lets you know exactly where on your screen anything you
type will appear. It can take the form of a vertical or horizontal line, a
block, or one of many other shapes.
icon appears on the system tray), you can
When the Fn keylock is ON (
use the following secondary functions with orange color on top of each
button.
increase the sound volume of your tablet PC.
decrease the sound volume of your tablet PC.
increase the brightness of LCD display.
decrease the brightness of LCD display.
Operating Your Tablet PC
2-5
Using the On-screen Keyboard
Use the on-screen keyboard to enter text and perform various keyboard
functions.
1. Click the on-screen keyboard icon (
) located on the Windows
system tray and the software keyboard will appear onscreen.
2. Tap the characters on the on-screen keyboard with the touchscreen
pen.
NOTE: To protect the LCD display, use the touchscreen pen on your
touchscreen.
2-6
Operating Your Tablet PC
Using the Touchscreen Pen
NOTE: The touchscreen function is not available when running the BIOS Setup
program or when using the full screen in DOS mode.
CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on the
touchscreen. Doing so may damage the touchscreen surface. Use your finger or
the included touchscreen pen. A screen protector film has been attached to the
screen before shipment. The film is a consumable, which will be worn out after a
period of use (6 months in average). You can purchase a new one when
replacement is required.
The touchscreen is a touch-sensitive device that allows you to easily use
the tablet PC without a mouse or touchpad to communicate with the
tablet PC by controlling the location of the pointer on the screen and
making selection with the buttons.
Operating Your Tablet PC
2-7
Here are some common terms that you should know when using the
touchscreen:
Term
Action
Click/Point
Tap gently on the touchscreen.
Double-click
Tap twice on the touchscreen rapidly.
Drag and
drop
Press lightly on the touchscreen and move your finger
until you reach your destination (drag). Finally, release
your finger (drop) when you finish dragging your
selection to the destination. The object will drop into
the new location.
2-8
Operating Your Tablet PC
Using the Quick Buttons
Located on top of the keypad are three quick buttons:
Fn button toggles the Fn keylock ON and OFF (
icon appears on the
system tray when ON). You can use the secondary functions of
keypad buttons with orange color on top of each button (as
described in the “Using the Keypad” section earlier in this chapter).
button toggles the keypad lock ON and OFF. Press the button to
turn on or press continuously for more than three seconds to turn off.
This would prevent accidental pressing of the keypad buttons during
transport.
Menu button toggles the OSD Control Panel utility ON and OFF. Upon
pressing it the following screen appears (see chapter 6 for more
details).
Operating Your Tablet PC
2-9
Using the Video Features
The video subsystem of your tablet PC features:
8.4-inch wide TFT (Thin-Film Transistor) color LCD with SVGA transmissive
display
Toggle display between landscape view and portrait view using the
LCD rotate button
Built-in light sensor to automatically adjust the LCD brightness
Manually adjust the display brightness using the LCD brightness up
) and down (
) buttons
Power Management
Sunlight-readable LCD display using the sunlight-readable mode
button
(option)
Configuring the Display Modes
Your tablet PC has been set to a default resolution and number of colors
before shipment. You can view and change display settings through your
operating system. See your operating system documentation or online
help for specific information.
2-10
Operating Your Tablet PC
Using the Audio Features
The audio subsystem of your tablet PC features:
High density audio codec
Manually adjust the sound volume using the sound volume up (
and down (
) buttons
Audio-out connector (
Integrated speaker (o)
) (n)
Ways of playing and recording sound vary with the operating system
used. See your operating system documentation or online help for specific
information.
Operating Your Tablet PC
2-11
Connecting Audio Devices
For higher audio quality, you can send sound through external audio
devices such as speakers, headphones, or earphone set using the
audio-out connector.
NOTE:
After connecting an external audio device,make sure that you specify the use
of the correct audio device in Windows.
z When using the external speakers/headphones, you cannot use the internal
one.
2-12
Operating Your Tablet PC
Using the Communication Features
Using the LAN
The internal 10/100/1000Base-T LAN (Local Area Network) module allows
you to connect your tablet PC to a network. It supports data transfer rate
up to 1000 Mbps.
To connect the network cable to the LAN module, connect one end of
the LAN cable to the RJ-45 connector (
) on the tablet PC and the
other end to the network hub.
Using the Wireless LAN
The WLAN features include:
Peer-to-Peer (Ad-Hoc) and Access Point (Infrastructure) modes
support
WEP (Wired Equivalent Privacy) 64/128-bit data encryption
IEEE 802.11b/g standard compliance
Technology
802.11b
802.11g
Stated Maximum
11 54
Throughput (Mbps)
Data Rates (Mbps) 11, 5.5, 2, 1
54, 36, 18, 9
Band (GHz)
2.4
2.412 ~ 2.462
Operating Your Tablet PC
2-13
Modulation
Technology
DSSS (Direct Sequence
Spread Spectrum)
OFDM (Orthogonal
Frequency Division
Multiplexing)
NOTE: 802.11g mode is backward compatible with 802.11b mode.
Turning Off/On the WLAN Radio
NOTE: The FAA (Federal Aviation Agency) has deemed it unsafe to operate
wireless devices in aircraft as this may interfere with flight safety. Remember to
turn off wireless LAN when using your tablet PC in the airplane.
1. Press the Menu button on your tablet PC to start up the OSD Control
Panel utility.
2. Click the RF button to switch the WLAN radio on/off, indicated by the
) glowing in green when on.
WLAN indicator (
If you need to temporarily turn off the radio, click the RF button. To resume
network connection, click the RF button again. Upon restarting your
system, wireless LAN radio would be on even if you turned it off before
system shutdown.
2-14
Operating Your Tablet PC
It takes approximately 30 seconds for your tablet PC to make a successful
WLAN connection and approximately 10 seconds to disconnect.
Connecting to a Wireless Network
To connect to a wireless network:
1. Make sure that the wireless LAN radio is “on” indicated by the wireless
LAN indicator ( ) glowing in green.
located on your
2. Double-click the Wireless Network Connection icon
Windows system tray. If any wireless network is detected, the following
window appears on screen.
3. Click to select a wireless network to connect to, and then click
Connect.
4. Depending on the settings, you may be asked to enter a WEP key
(refer to your Windows online help for more information on setting a
wireless network connection).
Operating Your Tablet PC
2-15
Using the Bluetooth® Wireless Feature
Depending on your model, your tablet PC may incorporate the Bluetooth
capability for short-range (about 10 meters) wireless communications
between devices without requiring a cable connection.
With Bluetooth, data can be transmitted through walls, pockets and
briefcases as long as two devices are within range. By default, your tablet
PC’s Bluetooth feature is active (always ON) upon booting your tablet PC
and is in the general discoverable and pairable mode.
The status of the Bluetooth connection is indicated by the Bluetooth icon
located in the system tray in the lower-right part of the screen.
Status
Icon
On
®
(blue with white logo).
Connected
®
(blue with green logo)
You can use the Bluetooth Utility to configure Bluetooth connection
settings and transfer files.
Connecting to Another Bluetooth Device
1. Make sure that the target Bluetooth device is turned on, discoverable
and within close range. (See the documentation that came with the
Bluetooth device.)
2. Right-click (press lightly until a pop-up menu appears) the
then click Add New Connection.
2-16
Operating Your Tablet PC
icon, and
3. The Add New Connection Wizard window appears. Select Express Mode
(Recommended), and then click Next.
4. Select the device to connect to and click Next.
Operating Your Tablet PC
2-17
5. Depending on the type of Bluetooth device that you want to connect
to, you will need to enter the pertinent information.
Sending a File
1. Make sure that the target Bluetooth device is turned on, discoverable
and within close range. (See the documentation that came with the
Bluetooth device.)
2. Right-click the
2-18
icon, and then click Wireless File Transfer.
Operating Your Tablet PC
Unlock
position
4. Remove the two screws if existing (n). Pull on the ribbon strip to lift the
battery pack off the computer (o).
5. Locate the SIM card slot and push the SIM card into the slot. Make sure
the beveled corner on the SIM card is facing towards the tablet PC
and that the golden contact area on the card is facing downwards.
Operating Your Tablet PC
2-21
To remove the SIM card, just push in (n) the SIM card to pop-out (o)
and remove the card.
6. Fit the battery pack into place and secure with two screws.
7. Replace the battery cover and turn the latch clockwise to the lock
position.
2-22
Operating Your Tablet PC
WARNING: Keep all SIM cards out of the reach of small children. For availability
and information on using SIM card services, contact your SIM card vendor. This
may be the service provider, network operator, or other vendor.
Operating Your Tablet PC
2-23
Chapter 3
Managing Power
Your tablet PC operates either on external AC power or on internal
battery power.
This chapter tells you how you can effectively manage power. To
maintain optimal battery performance, it is important that you use the
battery in the proper way.
Managing Power
3-1
AC Adapter
CAUTION:
z The AC adapter is designed for use with your tablet PC only. Connecting the
AC adapter to another device can damage the adapter.
z The AC power cord supplied with your tablet PC is for use in the country
where you purchased your tablet PC. If you plan to go overseas with thetablet
PC, consult your dealer for the appropriate power cord.
z When you disconnect the AC adapter, disconnect from the electrical outlet
first and then from the tablet PC. A reverse procedure may damage the AC
adapter or tablet PC.
z When unplugging the connector, always hold the plug head. Never pullon the
cord.
The AC adapter serves as a converter from AC (Alternating Current) to DC
(Direct Current) power because your tablet PC runs on DC power, but an
electrical outlet usually provides AC power. It also charges the battery
pack when connected to AC power.
The adapter operates on any voltage in the range of 100~240 V AC.
3-2
Managing Power
Battery Pack
The battery pack is the internal power source for the tablet PC. It is
rechargeable using the AC adapter.
The operating time of a fully charged battery pack depends on how you
are using the tablet PC. When your applications often access peripherals,
you will experience a shorter operating time.
NOTE: Care and maintenance information for the battery is provided in the
“Battery Pack Guidelines” section in Chapter 7.
Charging the Battery Pack
NOTE:
z Charging will not start if the battery’s temperature is below 0 °C (32 °F). It is
also recommended not to charge the battery when temperature is above 35
°C (95 °F).
z To prevent damage, the charging process may stop and the Battery Charge
Indicator flashes red when the environmental temperature gets above 55 °C
(131 °F).
z During charging, do not disconnect the AC adapter before the battery has
been fully charged; otherwise you will get a prematurely charged battery.
To charge the battery pack, connect the AC adapter to the tablet PC
and an electrical outlet. The Battery Charge Indicator ( ) on the tablet
PC glows amber to indicate that charging is in progress. You are advised
to keep the tablet PC power off while the battery is being charged. When
the battery is fully charged, the Battery Charge Indicator glows green.
It takes approximately 3 hours to fully charge the Li-Ion battery pack at a
room temperature of 25 °C (may need a longer charging time at lower
temperatures).
CAUTION: After the tablet PC has been fully recharged, do not immediately
disconnect and reconnect the AC adapter to charge it again. Doing so may
damage the battery.
Managing Power
3-3
NOTE: The battery level may automatically lessen due to the self-discharge
process (0.21% per day), even when the battery pack is fully charged (100%).
This happens no matter if the battery pack is installed in the tablet PC.
Initializing the Battery Pack
You need to initialize a new battery pack before using it for the first time or
when the actual operating time of a battery pack is much less than
expected.
Initializing is the process of fully charging, discharging, and then charging.
It can take several hours.
1. Make sure that the tablet PC power is turned off. Connect the AC
adapter to fully charge the battery pack.
2. After the battery pack is fully charged, turn on the tablet PC. Press the
Ent key when the prompt appears on the screen during system startup.
The prompt shows up on the screen for only a few seconds. You must
press the Ent key quickly.
3. A small window appears, select Launch System Setup to invoke the
program.
4. Disconnect the AC adapter and leave the tablet PC on until the
battery is fully discharged. The tablet PC will shut down automatically.
5. Connect the AC adapter to fully charge the battery pack.
Checking the Battery Level
NOTE: Any battery level indication is an estimated result. The actual operating
time can be different from the estimated time, depending on how you are using
the tablet PC.
By Operating System
You can check the approximate battery level using the battery meter
function of the operating system. To read the battery level in Windows,
3-4
Managing Power
click the
icon on the taskbar. (Click the
AC power.)
icon if the tablet PC is using
By Gas Gauge
On the exterior side of the battery pack is a gas gauge for displaying the
estimated battery charge. When the battery pack is not installed in the
tablet PC and you want to know the battery charge, you can press the
switch with a pointed device to see the corresponding value of indicator
segment that light green. The value of the corresponding green segment
indicates the relative percentage of the battery charge. The battery pack
is fully discharged when you see no segment glowing green.
Switch
Replacing the Battery Pack
CAUTION:
z There is danger of explosion if the battery is incorrectly replaced. Replace the
battery only with the tablet PC manufacturer’s optional battery packs. Discard
used batteries according to the dealer’s instructions.
z Do not attempt to disassemble the battery pack.
If you often rely on battery power for a long period of time while traveling,
you may consider the purchase of an additional battery pack from your
dealer and keep it with you in a fully charged state as a backup.
To replace the battery pack, follow these steps:
Managing Power
3-5
1. Make sure that the tablet PC is not turned on or connected to AC
power.
2. Place the tablet PC upside down.
3. Lift the latch handle of the battery cover and turn it counterclockwise
to the unlock position. Then, detach the cover from the tablet PC.
Unlock
position
4. Remove the two screws if existing (n). Pull on the ribbon strip to lift the
battery pack off the computer (o).
3-6
Managing Power
5. Fit another battery pack into place.
6. Replace the battery cover and turn the latch clockwise to the lock
position.
Battery Low Signals and Actions
Battery Low occurs when the battery has approximately 10% (Windows
default setting) of its charge remaining. The tablet PC’s Battery Charge
Indicator ( ) blinks red to alert you to take actions.
NOTE: You can set up your threshold and signals of Battery Low under Windows.
Immediately save your data upon Battery Low. The remaining operating
time depends on how you are using the tablet PC. If you are using the
audio subsystem, hard or USB flash disk, the battery might run out of charge very
quickly.
Always respond to Battery Low by placing your tablet PC on the Standby
or Hibernation mode, turning off the tablet PC, or connecting the AC
adapter. If you do not take any action, the tablet PC will automatically
hibernate and turn off.
Managing Power
3-7
CAUTION: If you fail to save your data when the battery completely runs out of
charge, then you lose your data.
3-8
Managing Power
Power Management
Your tablet PC supports ACPI (Advanced Configuration and Power
Interface) for power management. The power management feature
allows you to reduce the power consumption for energy saving.
With an ACPI-compliant operating system such as Windows, power supply
to different tablet PC components is controlled on an as-needed basis.
This allows maximum power conservation and performance at the same
time.
In general, Windows’ power management works in this way:
What...
When...
Power to the hard disk is turned off
When the hard disk has been idle for
a set period.
Power to the display is turned off
When the display has been idle for a
set period.
The tablet PC enters the Standby
mode. The hard disk and display
are turned off and the entire
system consumes less power.
When the entire system has been
idle for a set period.
The tablet PC enters the
Hibernation mode. (See the next
subsection for more information.)
When you press the power button. *
When the entire system has been
idle for a set period.
When you press the power button. *
* Depends on your settings in Windows.
For detailed information on power management, see Windows’ Help.
Managing Power
3-9
Hibernation
NOTE: Make sure that the hibernation feature is enabled in the Hibernate tab of
the Power Options Properties from the Control Panel in Windows XP.
Hibernation is a very useful feature. People frequently open many
applications when they use computers. It takes some time to get all these
applications open and running, and normally they all have to be closed
before the computer can be turned off.
When you use the hibernation feature, you do not have to close the
applications. The tablet PC stores the state of your tablet PC to a file on
the hard disk and then shuts down. The next time you turn on your tablet
PC, you return to exactly where you left off.
3-10
Managing Power
Power-Saving Tips
Aside from enabling your tablet PC’s power saving mode (see previous
section), you can do your part to maximize the battery’s operating time
by following these suggestions.
Do not disable Power Management.
Decrease the LCD brightness to the lowest comfortable level.
Shorten the length of time before Windows turn off the display.
Many USB devices use power just by being connected. If you use a
USB mouse, you can save power by disconnecting the mouse and
using the optional touchscreen pen. If you use a USB flash drive,
unplug it when you are not using it.
Deactivate the Wireless LAN function if you are not using it (see
Chapter 2).
Deactivate the Bluetooth wireless feature if you are not using it (see
Chapter 2).
Turn off the tablet PC when you are not using it.
Managing Power
3-11
Chapter 4
Expanding Your Tablet PC
You can expand the capabilities of your tablet PC by connecting other
peripheral devices. When using a device, be sure to read the instructions
accompanying the device together with the relevant section in this
chapter.
Expanding Your Tablet PC
4-1
Connecting a USB Device
Your tablet PC has two USB ports for connecting USB devices, such as a
digital camera, scanner, printer, modem, and mouse.
The USB ports support transfer rates up to 12 MB/s for USB 1.1 devices and
480 MB/s for USB 2.0 devices.
To connect a USB device, simply plug the device cable to one of the USB
ports (
).
4-2
Expanding Your Tablet PC
Using Smart Cards
Your tablet PC has a smart card slot for additional security feature,
providing tamper-proof storage of user and account identity. A smart
card is a type of plastic card embedded with a computer chip that stores
and transacts data between you (user) and the tablet PC.
You need to install third-party smart card software to take advantage of
the smart card feature.
Inserting and Removing a Smart Card
To insert a smart card:
1. Locate the smart card slot on the top of the tablet PC.
2. Slide the smart card, with its label and embedded computer chip
facing up into the slot.
3. When a new card is seated, use the third-party smart card software to
allow your tablet PC to read it.
To remove a smart card:
1. Make sure that the third-party smart card software is not accessing the
smart card.
2. Pull the card out of the slot.
Expanding Your Tablet PC
4-3
4-4
Expanding Your Tablet PC
Using the Docking Station
A docking station is available as an option. This device eliminates the
hassles of having you connect and disconnect the various cables when
carrying your tablet PC around and allows a variety of peripherals to be
connected including a headphone or microphone, etc. The docking
station connects to the docking connector at the front of your tablet PC.
1. Locate the docking connector.
2. Connect your docking station to the docking connector.
For more detailed information, refer to the Operating Instructions of the
docking station.
NOTE: Hot/warm docking and hot/warm undocking are possible with the docking
connector but it is recommended that prior to undocking, press the Menu button
and the OSD Control Panel appears. Click the Docking button.
Expanding Your Tablet PC
4-5
Chapter 5
Using BIOS Setup and
System Recovery
BIOS Setup Utility is a program for configuring the BIOS (Basic Input/ Output
System) settings of the tablet PC. BIOS is a layer of software, called
firmware, that translates instructions from other layers of software into
instructions that the tablet PC hardware can understand. The BIOS settings
are needed by your tablet PC to identify the types of installed devices
and establish special features.
System Recovery reinstalls Windows to your system and configures it to the
system’s factory default settings.
This chapter tells you how to use the BIOS Setup and System Recovery.
Using BIOS Setup and System Recovery
5-1
BIOS Setup
When to Use BIOS Setup
When to Use
You need to run BIOS Setup Utility when:
You see an error message on the screen requesting you to run BIOS
Setup Utility.
You want to restore the factory default BIOS settings.
You want to modify some specific settings according to the
hardware .
You want to modify some specific settings to optimize the system
performance.
Starting BIOS Setup
NOTE:
z The BIOS Setup Utility screens shown in this chapter are for your reference
only. The actual items or settings on your tablet PC may differ.
z The BIOS Setup Utility program may have been updated after the publication
of this manual.
z The settings you select in your operating system might override similar
settings in BIOS Setup Utility.
To run BIOS Setup utility, press the Ent key when the prompt appears on the
screen during system startup. The prompt shows up on the screen for only
a few seconds. You must press the Ent key quickly. A small window
appears, select Launch System Setup. The BIOS Setup Utility main screen
appears as shown next.
5-2
Using BIOS Setup and System Recovery
The BIOS Setup Utility screen can be divided into four areas:
On the top is the menu bar containing the titles of the available
menus. Each menu title brings a specific menu.
The left column of the menu displays the menu items.
The right column of the menu provides more detailed information
when a menu item is highlighted.
The bottom of the menu provides keyboard instructions for moving
around and making selections.
Moving Around and Making Selections
You must go through two or three levels to complete the setting for an
item. In most cases, there are two levels: menu title and submenu.
Use the keyboard to move around and make selections. Keyboard
information can be found at the bottom of the screen. A brief description
of keyboard usage is listed next:
Using BIOS Setup and System Recovery
5-3
Key
Function
←,→
Selects a menu title.
↑,↓
Selects an item or option.
+/–
Changes the value.
Ent
1) Brings up the sub-menu when available.
2) Opens or closes the option window when an item is
selected.
NOTE: You can press the F1, F9, F10, –/+, and Esc keys by connecting a USB
keyboard to your tablet PC. Make sure that the item “Legacy USB Support” under
the Main menu is set at Enabled (default).
Information Menu
The Information menu contains the basic configuration information of the
system.
5-4
Using BIOS Setup and System Recovery
Main Menu
The Main menu contains the system time and date, as well as the USB
setting of the system.
System Time sets the system time.
System Date sets the system date.
Power Button Delay allows you to prevent accidental pressing of the power
button.
Legacy USB Support enables the system’s support for Legacy USB device in
DOS mode.
Using BIOS Setup and System Recovery
5-5
Advanced Menu
The Advanced menu contains the advanced settings as shown next.
Total Graphics Memory allows you to select the amount of total graphics
memory (pre-allocated + fixed + DVMT) for use by the internal graphics
device.
DVMT Graphics Memory shows the size of DVMT graphics memory.
HDD Preheat allows your system to automatically turn on the optional
heater when temperature of the hard disk drive is lower than 5oC.
NOTE: The optional heater can function when your tablet PC is connected to AC
power or using battery power but the preheat feature can only function when your
tablet PC is connected to AC power.
High Temperature Protection allows you to turn off hard disk drive power to
prevent damage to data when HDD temperature goes above the safe
range. System will also show a warning message.
5-6
Using BIOS Setup and System Recovery
Security Menu
The Security menu contains the TPM (Trusted Platform Module) setting. The
TPM is a component on your tablet PC’s mainboard that is specifically
designed to enhance platform security above-and-beyond the
capabilities of today’s software by providing a protected space for key
operations and other security critical tasks. Using both hardware and
software, TPM protects encryption and signature keys at their most
vulnerable stages – operations when the keys are being used
unencrypted in plain-text form. TPM is specifically designed to shield
unencrypted keys and platform authentication information from
software-based attacks.
TPM Support enables or disables TPM support (see chapter 6 for details).
Current TPM State shows the current TPM state.
Change TPM State allows you to select between No Change, Clear,
Deactivate & Disable, and Enable & Activate.
Using BIOS Setup and System Recovery
5-7
Boot Menu
The Boot menu sets the sequence of the devices to be searched for the
operating system.
The bootable devices will be automatically detected during POST and
shown here, allowing you to set the sequence that the BIOS uses to look for
a device from which to load the OS. Below is a brief description of
keyboard usage:
Key
Function
↑,↓
Selects (highlight) a boot device.
1 to 4
Loads the default boot sequence.
NOTE: You can press the f, r, x, –/+, and Shift + 1 keys by connecting a USB
keyboard to your tablet PC. Make sure that the item “Legacy USB Support” under
the Main menu is set at Enabled (default).
5-8
Using BIOS Setup and System Recovery
Exit Menu
The Exit menu displays ways of exiting BIOS Setup Utility. After finishing with
your settings, you must save and exit so that the changes can take effect.
Exit Saving Changes saves the changes you have made and exits BIOS Setup
Utility.
Exit Discarding Changes exits BIOS Setup Utility without saving the changes
you have made.
Load Setup Defaults loads the factory default values for all the items.
Discard Changes restores the previous values for all the items.
Saves Changes saves the changes you have made.
Using BIOS Setup and System Recovery
5-9
System Recovery
You need to run System Recovery when:
Your Windows operating system does not start at all.
You want to restore the factory default Windows settings.
WARNING: Using this feature will reinstall Windows to your system and configure it to the
system’s factory default settings. All data on the hard disk drive will be lost.
To run System Recovery:
1. During system startup when the following screen appears, press Ctrl +
Alt + F2 keys for four seconds or press Ent and select HDI Recovery when a
small window appears on the screen.
2. The message This will help you reinstall Windows to the whole HDD
to factory default. All data on HDD will be lost appears on the
5-10
Using BIOS Setup and System Recovery
screen to ask if you want to access System Recovery. Type 1 to
continue or type 0 to exit.
3. A warning message appears as follows:
****************************************
You must accept the following terms before performing the recovery
process:
1. The recovery software is solely the purpose of reinstalling or
restoring software associated with the hard disk of this operating
GETAC machine.
2. Except the above, no other use is granted hereunder.
****************************************
(1)Yes, I agree to the provisions of this agreement and wish to
continue.
(0)No, I do not agree to the provisions of this agreement and do
not wish to continue.
Type 1 to continue.
4. Type 1 again when the message Are you sure you want to recover now?
(1)Yes (0)No appears onscreen.
5. Your system will start the recovery process and Windows operating
system will be re-installed to its default setting.
Using BIOS Setup and System Recovery
5-11
Chapter 6
Using Special Utilities
Your tablet PC comes with an added security feature known as the TPM
(Trusted Platform Module) – a component on your tablet PC’s mainboard
that is specifically designed to enhance platform security above-andbeyond the capabilities of today’s software by providing a protected
space for key operations and other security critical tasks.
The OSD Control Panel utility allows you to activate or operate certain
functions on your tablet PC.
The G-Manager utility is a unified user interface utility that allows you to
manage and configure various system components.
This chapter describes how to use these utilities.
Using Special Utilities
6-1
Using TPM (Trusted Platform Module)
TPM is a hardware-based security feature that can be used to create and
manage computer-generated digital certificates. When combined with
security software, the TPM enhances existing network and computer
security by enabling features such as file protection capabilities and
protected e-mail.
NOTE:
z Make sure you select Enable on the TPM Support item under the Security menu
of your BIOS Setup (see chapter 5 for details).
z Make sure you select Enable & Activate on the Change TPM State item under
the Security menu of your BIOS Setup (see chapter 5 for details).
z You only need to activate these items once.
You can use the certificates to:
Send and receive secure email from email clients like Microsoft
Windows Mail/Outlook Express, Microsoft Outlook or Netscape
Messenger
Set up browser (e.g. Netscape Navigator or Internet Explorer) and web
server (e.g. Microsoft Internet Information Server) for Client
Authentication
Sign Microsoft Word macros
Encrypt files and folders
Secure network connections
NOTE: For information on using the program and the different security features,
click Start Æ All Programs Æ Infineon Security Platform Solution Æ Help.
6-2
Using Special Utilities
Using the OSD Control Panel
The OSD Control Panel allows you to activate or operate certain functions
on your tablet PC.
To open the OSD Control Panel, press the Menu button on your tablet PC.
The following screen appears.
Using Special Utilities
6-3
The following table shows the various functions on the OSD Control Panel.
Operation
OSD Control Panel Description
Switches the keypad lock ON and OFF. Press the button
one second to turn ON (lock) and continuously for
more than three seconds to turn OFF (unlock).
This would prevent accidental pressing of the keypad
buttons during transport.
Switches the Fn keylock ON and OFF (
on the system tray when ON).
icon appears
You can use the secondary functions of keypad buttons
with orange color on top of each button.
A Help file explaining the OSD Control Panel.
Turns on the Quick Button Setup utility (refer to the next
section for details).
Closes and exits the OSD Control Pane.
Switches the RF module OFF and ON (wireless LAN,
Bluetooth, 3G).
Upon restarting your system, wireless LAN radio would
be on even if you turned it off before system shutdown.
Toggles the system power saving mode between OFF /
Work / Quick and Power Saving.
While entering into power saving mode, the system will
turn down the panel backlight and sacrifices
processing speed to gain more battery life. The ECO
button works only when using battery power.
The status would display IN when you connect your
tablet PC to a docking station.
To turn off power to the docking station without
disconnecting from your tablet PC, click the Docking
button.
Before removing your tablet PC from the docking
6-4
Using Special Utilities
Operation
OSD Control Panel Description
station, make sure to click the Docking button to show
OUT.
Toggles between NORMAL, MAX, and AUTO brightness for
LCD backlight.
Rotates the LCD display orientation from default
landscape to 90o portrait, 180o landscape, 270o portrait,
and vice versa.
Toggles between LCD, VGA (external device e.g.,
monitor), and BOTH (LCD and external device).
Switches the display output when external devices are
connected. If the external device is not connected,
the choice would only be LCD. Upon restarting your
system, the setting would be LCD only.
Serves as the default Microsoft® Internet Explorer quick
launch button.
You can use the Quick Button Setup utility to assign a
different function to this button (refer to the next
section for details).
Serves as the default Microsoft® Outlook Express quick
launch button.
You can use the Quick Button Setup utility to assign a
different function to this button (refer to the next
section for details).
Serves as the default LCD display calibration tool quick
launch button.
You can use the Quick Button Setup utility to assign a
different function to this button (refer to the next
section for details).
Using Special Utilities
6-5
Operation
OSD Control Panel Description
Serves as the default Bluetooth® wireless setup quick
launch button.
You can use the Quick Button Setup utility to assign a
different function to this button (refer to the next
section for details).
Serves as the default virtual keyboard quick launch
button.
You can use the Quick Button Setup utility to assign a
different function to this button (refer to the next
section for details).
Increases or decreases the sound volume. This function
adjusts the volume of sound output both from the
speakers and headphones. It is synchronized with your
Windows main volume controller.
Upon restarting your system, Windows will memorize the
last setting before system shutdown.
Increases or decreases the LCD brightness level.
Upon restarting your system, Windows will memorize the
last setting before system shutdown.
Switches the system sound output OFF (mute) and ON.
This function mutes the sound output both from the
speakers and headphones. It is synchronized with your
Windows main volume controller.
Upon restarting your system, Windows will memorize the
last setting before system shutdown.
System enters “black-out” mode by turning off the LCD
display, LED indicators, touchscreen, and sound
6-6
Using Special Utilities
Operation
OSD Control Panel Description
volume.
Press the power button (
from “black-out” mode.
) to wake up the system
Quick Button Setup Utility
By default, the five quick launch buttons on the OSD Control Panel have
pre-assigned functions.
The Quick Button Setup utility allows you to re-define the above five quick
launch buttons. To re-define:
1. Click the Quick Button Setup utility button (
Setup window appears as shown next.
) and the Quick Button
Using Special Utilities
6-7
2. To re-assign a program to a button, click to select a particular button
to change (e.g., Explorer), then click the folder icon.
3. The Select a File to Open dialog box appears as shown next. Select the
desired program, then click Open to complete the process.
6-8
Using Special Utilities
4. You can change the image appearing on the button by clicking the
Select Image icon.
5. The Select Picture dialog box appears as shown next. After selecting the
image file, the appropriate icon will then appear in the button.
6. Click Set to complete the changes.
Using Special Utilities
6-9
Using the G-Manager Utility
G-Manager is a unified user interface utility that allows you to manage
and configure the following:
System
Battery
Light Sensor
ECO (economy mode)
Ignition
Monitoring
Antenna
GPS Status
Starting G-Manager
You can start up G-Manager by any of the following methods:
6-10
Click Start Æ All Programs Æ GETAC Utility Æ G-Manager, or
Right-click on the GETAC Utility icon (
and click G-Manager.
Using Special Utilities
) located on the system tray
System Tab
The System tab provides an overview of the system status.
The component to be viewed is selected from the tree view list on the left
side of the screen. It contains eight major components namely:
Summary
System
Sensors
Disk Drives
Battery
Signal Strength
Display
OS (operating system)
Using Special Utilities
6-11
The status of the selected component is displayed on the right side of the
screen.
Battery Tab
The Battery tab allows you to minimize deterioration of the battery thereby
ensuring a longer battery life. At most two batteries may be supported.
Press Battery 1 or Battery 2 to view the details and configuration settings of
each battery.
Battery Information
The upper portion of the Battery tab contains a live update of information
about the selected battery.
NOTE:
z When the percentage % Left is less than 10% then the value will be displayed
in red.
6-12
Using Special Utilities
z
When an abnormal battery condition is detected Battery Status value will be
displayed in red.
Charging Mode
The lower left portion of the Battery tab allows you to select the charging
mode.
Normal Mode – the battery will be fully charged. When remaining
charge reaches below 95%, then charging will start until it is fully
charged.
Economy Mode – to help prolong battery life the battery will be charged
up to 80% of its total capacity only. Highly recommended when you
are using AC power most of the time.
Gauge Reset
The lower right portion of the Battery tab allows you to discharge and
recharge the battery in order to activate certain physical attributes
periodically. The percentage bar shows the battery health.
The low health bar percentage indicates the poorer health of the battery,
therefore the need to perform the gauge reset in order to calibrate
battery’s capacity and improve the battery’s performance.
To perform a gauge reset:
1. Click Perform Gauge Reset to perform a gauge reset and the following
screen appears.
Using Special Utilities
6-13
2. Click Yes to start the gauge reset session and the following screen
appears.
The percentage of completion will be shown on the progress bar.
Depending on the number of battery, the screen will show the
corresponding number of batteries to perform gauge reset. The value of
Working Status will show in red alternately.
You can click Cancel anytime to stop gauge reset.
NOTE: When a gauge reset is in progress, do not execute other operation except
to click Cancel to stop gauge reset.
6-14
Using Special Utilities
Light Sensor Tab
The Light Sensor tab allows you to adjust the LCD brightness based on your
surrounding’s lighting condition.
Sensor Mode
The left portion of the Light Sensor tab allows you to select the sensor
mode.
Normal – light sensor sensitivity is set at normal environment lighting
condition.
Bright – light sensor sensitivity is set at bright environment lighting
condition (e.g. outdoors).
Dark – light sensor sensitivity is set at dark environment lighting condition
(e.g. indoors, storage warehouse, etc.).
Using Special Utilities
6-15
The lower left portion of the Light Sensor tab shows the selected sensor
mode’s graph.
The upper right portion of the Light Sensor tab shows the active profile
based on your selection on sensor mode.
The middle right portion of the Light Sensor tab shows the environment
luminance (degree of Lux from weak to bright) as detected by your tablet
PC’s light sensor.
The lower right portion of the Light Sensor tab allows your system to
illuminate the keypad in poor lighting environment by selecting the
checkbox Automatic Keyboard Backlit.
ECO Tab
The ECO tab allows you to manage the system’s power consumption.
NOTE: The items appearing on the ECO tab may differdepending on your model.
6-16
Using Special Utilities
ECO Information
Depending on the system, the left portion of the ECO tab shows the
available profile to manage the system’s power consumption.
Active Profile
The right upper portion of the ECO tab shows the name of the current
profile selected.
Profile Settings
The lower right portion of the ECO tab contains the following:
Turn on/off the following for power saving: WWAN, Bluetooth, WLAN,
and optical disk drive.
Power Scheme – select Home/Office Desk, Portable/Laptop, Presentation, Always
On, Minimal Power Management, or Max Battery if your system is running
Windows XP. Select Balanced, High Performance or Power Saver if the system
is running Windows Vista. The setting here will correspond to your
settings in Windows. (See Windows Help for the description to each of
the power scheme.)
Brightness – adjust the brightness setting from 0 ~ 63. This option is not
available on systems running Windows Vista.
Default – revert back to original profile setting.
Using Special Utilities
6-17
Ignition Tab
The Ignition tab allows you to set if the system is deriving power from your
vehicle.
Ignition Control
The left portion of the Ignition tab allows your system to derive power from
the vehicle as well as boot up your tablet PC by selecting the checkbox
Ignition Power On. Your tablet PC will also shutdown when you turn off
ignition to your vehicle. The amount of time between turning off your
vehicle and tablet PC shutdown would depend on your setting on the
next section Delay Time. This feature is only available when your tablet PC
is docked to the GETAC docking station.
6-18
Using Special Utilities
Delay Time
The right portion of the Ignition tab allows you to set the delay time
(20 seconds, 30 seconds, 45 seconds, 1 minute, or 2 minute) to shut down
the system when you turn off vehicle ignition. This will help prevent the
tablet PC from using up the vehicle’s battery power thereby causing poor
vehicle startup.
Monitoring Tab
The Monitoring tab allows you to select the items on your system to monitor.
Press OK and right-click on the G-manager icon (
) located on the
system tray and click Start Monitor. The changes made to the monitoring
options are immediately implemented on the monitoring window.
To exit the monitor function, right-click on the G-manager icon (
located on the system tray and click Stop Monitor.
Using Special Utilities
6-19
Items to Monitor
The left portion of the Monitoring tab allows you to select which item to
monitor by selecting on the checkbox before each item. When enabled
the status of the selected Item is displayed and a live update is shown on
the screen. Items with higher priority are shown on top of items with lower
priority (see the next table).
Priority
Monitoring Items
1 CPU
Priority
clock
Monitoring Items
WLAN
CPU load
10
GPU temperature
CPU voltage
11
GMCH 1 temperature
CPU temperature
12
GMCH 2 temperature
RAM free
13
HDD temperature
Virtual RAM free
14
HDD free space
Battery left time
15
Fan speed
8B
attery left
percentage
16
Environment
luminance
Different model have different supported monitoring items;
non-supported items cannot be selected (gray out item).
Monitoring Options
The right portion of the Monitoring tab allows you to set how the
monitored items are displayed. The changes made to the monitoring
options are immediately implemented on the monitoring window.
6-20
Always On Top – allows the monitoring window to remain on top of your
display.
Background Color – select this option to display the color window for
selecting the background color. If the checkbox is not selected, the
background of the monitoring window is transparent.
Using Special Utilities
z
Monitoring Interval – allows you to set the frequency of updates on the
monitoring window (1/3/5/10/30 seconds, or 1/5/30 minutes, or 1 hour).
Transparency – allows you to set the level of transparency of the
monitoring window (10 ~ 90 %).
Using Special Utilities
6-21
GPS Status Tab
The GPS Status tab shows the GPS signal availability status of the system’s
GPS module, allowing you to check if the GPS feature is working properly.
You may also need to install a third-party map of your particular location
(purchased separately).
Selected Item and Data Summary
The upper left portion of the GPS Status tab shows the various data (Date
Stamp, Time Stamp, Current Latitude, Current Longitude, Current Altitude,
No. of Satellites in View, and Acquisition Status) collected from satellites
and reflect any changes to the data.
Unlike the other items, Acquisition Status only shows whether GPS signal
acquisition is successful or not.
6-22
Using Special Utilities
Message Log
The lower left portion of the GPS Status tab shows a summary of raw data
string received from satellites which can only be viewed but not editable.
The Message Log window is auto-scrollable and will be cleared as soon as
GPS signal is disconnected.
Satellite Map
The upper right portion of the GPS Status tab shows the satellites
discovered and are placed on the satellite map according to their
parsed latitude and longitude. Satellites in use are displayed in yellow color
with their PRN number while satellites in view but not in use are displayed
in blue color.
Signal Indicator
The lower right portion of the GPS Status tab shows the 12 satellites’ signal
indicator. The length of the green bar underneath each satellite changes
dynamically, the stronger the signal the longer the bar shown. Beneath
each signal bar is the PRN number of each discovered satellite (“00” is
shown when GPS module is not functioning or satellite was not
discovered).
Open/Close GPS
This button allows you to test the GPS module. Upon clicking on Open GPS,
the following three conditions may be shown:
GPS module has successfully connected –
The button changes from “Opening . . . “ to “Close GPS.” The item
Acquisition Status under the Data Summary portion of the GPS Status
tab will change from “Inactive” to “Acquiring . . . “ and begin the
positioning process. It will then change to “Acquired” when GPS
module has successfully been positioned.
GPS COM port is not available –
When other GPS program is running, a warning window pops-up and
Using Special Utilities
6-23
displays the message “GPS COM port not available! Please close all
GPS program and try again.” to inform you to close the other GPS
program to free up the COM port. After closing the other GPS
program, click Open GPS button again to try.
GPS COM port is somehow not functioning –
A warning window pops-up and displays the message “Time out
opening GPS COM port!” when GPS COM port is not responding after
5 seconds.
Upon clicking on Close GPS, the GPS COM port will be closed and the
button will change to show Open GPS. All information under the Satellite
Map, Signal Indicator, Message Log, and Data Summary portion of the
GPS Status tab is cleared except for the item Acquisition Status which will
show “Inactive.”
GPS connection will be automatically closed whenever G-Manager is
closed.
6-24
Using Special Utilities
Chapter 7
Caring for the Tablet PC
Taking good care of your tablet PC will ensure a trouble-free operation
and reduce the risk of damage to your tablet PC.
This chapter gives you guidelines covering areas such as protecting,
storing, cleaning, and traveling.
Caring for the Tablet PC
7-1
Protecting the Tablet PC
To safeguard the integrity of your tablet PC data as well as the tablet PC
itself, you can protect the tablet PC in several ways as described in this
section.
Using the Cable Lock
You can use a Kensington-type cable lock to protect your tablet PC
against theft. The cable lock is available in most tablet PC stores.
To use the lock, loop the lock cable around a stationary object such as a
table. Insert the lock to the Kensington lock hole and turn the key to
secure the lock. Store the key in a safe place.
7-2
Caring for the Tablet PC
Taking Care of the Tablet PC
Location Guidelines
For optimal performance, use the tablet PC where the recommended
temperature is between 10 °C (50 °F) and 35 °C (95 °F) – actual
operating temperature depending on product specifications.
Avoid placing the tablet PC in a location subject to high humidity,
extreme temperatures, mechanical vibration, direct sunlight, or heavy
dust.
Do not cover or block any ventilation openings on the tablet PC. For
example, do not place the tablet PC on a bed, sofa, rug, or other
similar surface. Otherwise, overheating may occur that results in
damage to the tablet PC.
Keep the tablet PC at least 13 cm (5 inches) away from electrical
appliances that can generate a strong magnetic field such as a TV,
refrigerator, motor, or a large audio speaker.
Avoid moving the tablet PC abruptly from a cold to a warm place. A
temperature difference of more than 10 °C (18 °F) may cause
condensation inside the unit, which may damage the storage media.
Do not place the tablet PC on an unsteady surface.
General Guidelines
Do not place heavy objects on top of the tablet PC as this may
damage the display.
The screen surface is easily scratched. Do not use paper towels to
clean the display but use the included soft cloth. Avoid touching it
with your fingers, pen, or pencil.
To maximize the life of the backlight in the display, allow the backlight
to automatically turn off as a result of power management. Avoid
Caring for the Tablet PC
7-3
using a screen saver or other software that prevents the power
management from working.
Cleaning Guidelines
Never clean the tablet PC with its power on.
Use a soft cloth moistened with water or a non-alkaline detergent to
wipe the exterior of the tablet PC.
Gently wipe the display with a soft, lint-free cloth. Do not use alcohol
or detergent on the display.
Battery Pack Guidelines
Recharge the battery pack when it is nearly discharged. When
recharging, make sure that the battery pack is fully charged. Doing so
may avoid harm to the battery pack.
The battery pack is a consumable product and the following
conditions will shorten its life:
– when frequently charging the battery pack (it is recommended that
you set the Charging Mode on the G-Manager utility’s Battery tab to
Economy Mode – see chapter 6 for details).
– when using, charging, or storing the battery in high temperature
condition
To avoid hastening the deterioration of the battery pack thereby
prolonging its useful life, minimize the number of times you charge it so
as not to frequently increase its internal temperature.
Charge the battery pack between 5oC ~ 45oC (41oF ~ 113oF)
temperature range.
A higher environment temperature will cause the battery pack’s
temperature to rise. Avoid charging the battery pack inside a closed
vehicle and in hot weather condition.
Also, charging will not start if the battery pack is not within the allowed
temperature range.
7-4
Caring for the Tablet PC
z
It is recommended that you do not charge the battery pack more
than once a day.
It is recommended that you charge the battery pack with the tablet
PC’s power off.
To maintain the battery pack’s operating efficiency, store it in a cool
dark place removed from the tablet PC and with 30 % ~ 40 % charge
remaining.
Important guidelines when using the battery pack.
When installing or removing the battery pack take note of the
following:
– avoid installing or removing the battery pack when the tablet PC is
in Standby mode. Abruptly removing the battery pack may cause
loss of data or the tablet PC may become unstable.
– avoid touching the battery pack terminals or damage may occur,
thereby causing improper operation to it or the tablet PC.
The tablet PC’s input voltage and surrounding temperature will
directly affect the battery pack’s charge and discharge time:
– charging time will be prolonged when the tablet PC is turned on.
To shorten the charging time, it is recommended that you place the
tablet PC in standby or hibernation mode.
– a low temperature will prolong the charging time as well as hasten
the discharge time.
Touchscreen Guidelines
Use the finger or the included touchscreen pen on the display. Using a
sharp or metallic object other than your finger or touchscreen pen
may cause scratches and damage the display, thereby causing
errors.
A screen protector film has been attached to the screen before
shipment. The film is a consumable, which will be worn out after a
period of use (6 months in average). You can purchase a new one
when replacement is required.
Caring for the Tablet PC
7-5
z
Avoid using excessive force that may cause damage to the display.
Use a soft cloth to remove dirt on the display. The touchscreen surface
has a special protective coating that prevents dirt from sticking to it.
Not using a soft cloth may cause damage to the special protective
coating on the touchscreen surface.
To remove hard to remove dirt, blow some steam on the particular
area and gently wipe away using a soft cloth.
Turn off the tablet PC power when cleaning the display. Cleaning the
display with the power on may cause improper operation.
Use the touchscreen within the intended area only. The display area
and touchscreen operating area is the same.
Do not use excessive force on the display. Avoid placing objects on
top of the display as this may cause the glass to break thereby
damaging the display.
Using the touchscreen during low temperature (less than 5 oC) may
cause a slower response time, this is normal. A normal response time
may be restored upon returning to room temperature.
When there is noticeable discrepancy in the operation of the
touchscreen function (wrong location on intended operation or
improper display resolution), refer to the Windows operating system for
instructions on recalibrating the touchscreen display.
7-6
Caring for the Tablet PC
When Traveling
Before traveling with your tablet PC, make a backup of your hard disk
data into flash disks or other storage devices. As an added
precaution, bring along an extra copy of your important data.
Make sure that the battery pack is fully charged.
Make sure that the tablet PC is turned off.
Disconnect the AC adapter from the tablet PC and take it with you.
Use the AC adapter as the power source and as a battery-charger.
Hand-carry the tablet PC. Do not check it in as luggage.
If you need to leave the tablet PC in the car, put it in the trunk of the
car to avoid exposing the tablet PC to excessive heat.
When going through airport security, it is recommended that you send
the tablet PC and flash disks through the X-ray machine (the device
you set your bags on). Avoid the magnetic detector (the device you
walk through) or the magnetic wand (the handheld device used by
security personnel).
If you plan to travel abroad with your tablet PC, consult your dealer for
the appropriate AC power cord for use in your country of destination.
Caring for the Tablet PC
7-7
Chapter 8
Troubleshooting
Tablet PC problems can be caused by hardware, software, or both. When
you encounter any problem, it might be a typical problem that can easily
be solved.
This chapter tells you what actions to take when solving common tablet
PC problems.
Troubleshooting
8-1
Preliminary Checklist
Here are helpful hints to follow before you take further actions when you
encounter any problem:
Try to isolate which part of the tablet PC is causing the problem.
Make sure that you turn on all peripheral devices before turning on the
tablet PC.
If an external device has a problem, make sure that the cable
connections are correct and secure.
Make sure that the configuration information is properly set in the BIOS
Setup program.
Make sure that all the device drivers are correctly installed.
Make notes of your observations. Are there any messages on the
screen? Do any indicators light? Do you hear any beeps? Detailed
descriptions are useful to the service personnel when you need to
consult one for assistance.
If any problem persists after you follow the instructions in this chapter,
contact an authorized dealer for help.
8-2
Troubleshooting
Solving Common Problems
Battery Problems
The battery does not charge (Battery Charge indicator does not light amber).
Make sure that the AC adapter is properly connected.
Make sure that the battery is not too hot or cold. Allow time for the
battery pack to return to room temperature.
Make sure that the battery pack is installed correctly.
Make sure that the battery terminals are clean.
The operating time of a fully charged battery becomes shorter.
If you often partially recharge and discharge, the battery might not be
charged to its full potential. Initialize the battery to solve the problem.
(See “Initializing the Battery Pack” in Chapter 3 for instructions.)
The battery operating time indicated by the battery meter does not match the
actual operating time.
The actual operating time can be different from the estimated time,
depending on how you are using the tablet PC. If the actual
operating time is much less than the estimated time, initialize the
battery. (See “Initializing the Battery Pack” in Chapter 3 for
instructions.)
Bluetooth Wireless Transmission Problems
I cannot connect to another device with Bluetooth wireless technology.
Make sure that both devices have activated Bluetooth feature.
Make sure that the distance between the two devices are not over 10
meters or that there are no walls or other obstructions between the
devices.
Troubleshooting
8-3
z
Make sure that the other device is not in “Hidden” mode.
Make sure that both devices are compatible.
Display Problems
Nothing appears on the screen.
During operation, the screen may automatically turn off as a result of
power management. Press any key to see if the screen comes back.
The brightness level might be too low. Increase brightness by pressing
the
button.
The characters on the screen are dim.
Adjust the brightness and/or contrast.
Bad dots appear on the display at all times.
A small number of missing, discolored, or bright dots on the screen are
an intrinsic characteristic of TFT LCD technology. It is not regarded as a
LCD defect.
Hardware Device Problems
The tablet PC does not recognize a newly installed device.
The device may not be correctly configured in the BIOS Setup
program. Run the BIOS Setup program to identify the new type.
Make sure if any device driver needs to be installed. (Refer to the
documentation that came with the device.)
Make sure if the device needs any jumper or switch settings. (Refer to
the documentation that came with the device.)
Check the cables or power cords for correct connections.
For an external device that has its own power switch, make sure that
the power is turned on.
8-4
Troubleshooting
Hard Disk Drive Problems
The hard disk drive error message appears on the screen.
The hard disk drive has defects. Ask your dealer for help.
The hard disk drive operations seem slow.
The data files stored on the hard disk drive may be fragmented. Use a
tool such as Window’s Disk Defragmenter to defragment the files.
The hard disk drive / heater indicator (
) glows without blinking.
The data files stored on the hard disk drive may be fragmented. Use a
tool such as Window’s Disk Defragmenter to defragment the files.
The hard disk drive / heater indicator glows red.
When the tablet PC is connected to AC power and hard disk drive
temperature is below 5 oC, the optional heater would turn on (if the
item HDD Preheat under the Advanced menu of your BIOS Setup is set
at Enabled). Wait awhile.
LAN Problems
I cannot access the network.
Make sure that the LAN cable is properly connected to the RJ-45
connector (
) and the network hub.
Make sure that the network configuration is appropriate.
Make sure that the user name or password is correct.
Wireless LAN Problems
I cannot use the wireless LAN feature.
Make sure that the wireless LAN feature is turned on.
Troubleshooting
8-5
Transmission quality is poor.
Your tablet PC may be in an out-of-range situation. Move your tablet
PC closer to the Access Point or another wireless LAN device it is
associated with.
Check if there is high interference around the environment and solve
the problem as described next.
Radio interference exists.
Move your tablet PC away from the device causing the radio
interference such as microwave oven and large metal objects.
Plug your tablet PC into an outlet on a different branch circuit from
that used by the affecting device.
Consult your dealer or an experienced radio technician for help.
I cannot connect to another wireless LAN device.
Make sure that the wireless LAN feature is turned on.
Make sure that the SSID setting is the same for every wireless LAN
device in the network.
Your tablet PC is not recognizing changes. Restart the tablet PC.
Make sure that the IP address or subnet mask setting is correct.
I cannot communicate with the computer in the network when Infrastructure
mode is configured.
Make sure that the Access Point your tablet PC is associated with is
powered on and all the LEDs are working properly.
If the operating radio channel is in poor quality, change the Access
Point and all the wireless station(s) within the BSSID to another radio
channel.
Your tablet PC may be in an out-of-range situation. Move your tablet
PC closer to the Access Point it is associated with.
8-6
Troubleshooting
z
Make sure that your tablet PC is configured with the same security
option (encryption) to the Access Point.
Use the Web Manager/Telnet of the Access Point to check whether it
is connected to the network.
Reconfigure and reset the Access Point.
I cannot access the network.
Make sure that the network configuration is appropriate.
Make sure that the user name or password is correct.
You have moved out of range of the network.
Turn off power management.
PC Card Problems (Optional)
The PC card does not work.
Make sure that the PC card is correctly seated.
If the card requires an IRQ (Interrupt ReQuest), make sure that there
is one available.
The PC card stops communicating properly.
The application may have been reset when the tablet PC is turned
off or in Standby/Sleep mode. Exit and restart the application.
Power Management Problems
The tablet PC does not enter Standby or Hibernation mode automatically.
If you have a connection to another computer, the tablet PC does
not enter Standby or Hibernation mode if the connection is actively in
use.
Make sure that the Standby or Hibernation time-out is enabled.
Troubleshooting
8-7
The tablet PC does not enter Standby or Hibernation mode immediately.
If the tablet PC is performing an operation, it normally waits for the
operation to finish.
The tablet PC does not resume from Standby or Hibernation mode.
The tablet PC automatically enters Standby or Hibernation mode
when the battery pack is empty. Do any one of the following:
− Connect the AC adapter to the tablet PC.
− Replace the empty battery pack with a fully charged one.
Software Problems
An application program does not work correctly.
Make sure that the software is correctly installed.
If an error message appears on the screen, consult the software
program’s documentation for further information.
If you are sure the operation has stop, reset the tablet PC. (See
“Resetting the Tablet PC” later in this chapter.)
Sound Problems
No sound is produced.
Make sure that the volume control is not set too low. Increase volume
by pressing the
button.
Make sure that the tablet PC is not in Standby mode.
If using an external speaker, make sure that the speaker is properly
connected.
Distorted sound is produced.
8-8
Make sure that the volume control is not set too high or too low. In
most cases, a high setting can cause the audio electronics to distort
the sound.
Troubleshooting
The external audio device does not work.
Make sure that your tablet PC is equipped with the driver needed.
Click the speaker symbol on the taskbar and check the Windows
volume control.
Check the volume control of your tablet PC.
Startup Problems
When you turn on the tablet PC, it does not respond and the Power Indicator
does not light green.
If you are using an external AC power, make sure that the AC adapter
is correctly and securely connected. If so, make sure that the
electrical outlet works properly.
If you are using the battery power, make sure that the battery is not
discharged.
When the tablet PC is connected to AC power and hard disk drive
temperature is below 5 oC, the optional heater would turn on as
indicated by the hard disk drive / heater indicator (
) glowing in red
(if the item HDD Preheat under the Advanced menu of your BIOS Setup
is set at Enabled). Wait awhile.
When you turn on the tablet PC, it stops after POST.
Restart your tablet PC.
Other Problems
The date/time is incorrect.
Correct the date and time via the operating system or BIOS Setup
program.
After you have performed everything as described above and still
have the incorrect date and time every time you turn on the tablet
Troubleshooting
8-9
PC, the RTC (Real-Time Clock) battery is at the end of its life. Call an
authorized dealer to replace the RTC battery.
8-10
Troubleshooting
Resetting the Tablet PC
You may have to reset (reboot) your tablet PC on some occasions when
an error occurs and the program you are using hangs up.
If the tablet PC operation seems to hang up, first wait. It is possible that the
tablet PC is processing data. Periodically check the hard disk drive in-use
indicator, if it flashes irregularly, the program may be accessing data and
preventing you from using the keypad. If you are sure the operation has
stopped and you cannot use the “restart” function of the operating
system, reset the tablet PC.
Reset the tablet PC by any one of these methods:
Press the Fn button, then press C+A+D button on your built-in keypad.
If the above action does not work, turn off the tablet PC. Wait for at
least five seconds and turn it on again.
CAUTION: Resetting will cause any unsaved data to be lost.
Troubleshooting
8-11
Appendix A
Specifications
NOTE: Specifications are subject to change without any prior notice.
Parts
Specifications
CPU
Intel® A110 processor, 512 KB L2 cache, 800 MHz
RAM (system)
Up to 1 GB DDRII DRAM
Display
Panel
8.4-inch wide TFT LCD, SVGA transmissive display,
integrated touchscreen, 800 Nits LCD brightness (option)
Audio
Features
High Definition audio, volume control via keypad and
software
Speaker I
ntegrated speaker
Port Line-out
Hard disk drive
Shock-mounted, 60/80/120 GB
Card slots
Smart Card
I/O ports
USB (2.0) ports × 2, RJ-45 port, audio line-out port, Smart Card
connector, docking connector
LAN
10/100/1000 Mbps Ethernet
Wireless LAN
IEEE 802.11b/g, AES, TKIP, WEP, 802.11i/WPA2 security,
authentication 802.1x, 802.11e/WMM Quality of Service
Bluetooth
Bluetooth
GPS
Integrated Global Positioning System (GPS) receiver module
(with antenna pass-through)
WWAN
CDMA / EV-DO / 1xRTT or HSDPA/UMTS/GPRS/GSM (with
antenna pass-through)
Security Kensingt
on lock
TPM 1.2 (availability may vary)
Smart Card Reader
Power
Li-ion smart battery 5100 mAH / 7.4 V or above
Battery
Dimension (LxW×D)
280×184×32 mm (11×7.2×1.3 inch)
Weight
1.4 kg (3.09 lb)
Specifications
A-1
Parts
Environment
Temperature O perating: –20 °C (–4 °F) to 60 °C (140 °F)
Storage: –40 °C (–40 °F) to 75 °C (167 °F)
Thermal shock: –20 °C (–4 °F) to 60 °C (140 °F)
Humidity
Compliance
A-2
Specifications
Specifications
Relative: 0 % to 95 % non-condensing
MIL-STD 810F and IP54
Appendix B
Regulatory Information
This appendix provides regulatory statements and safety notices on your
tablet PC.
NOTE: Marking labels located on the exterior of your tablet PC indicate the
regulations that your model complies with. Please check the marking labels and
refer to the corresponding statements in this appendix. Some notices apply to
specific models only.
Regulatory Information
B-1
On the Use of the System
Class B Regulations
USA
Federal Communications Commission Radio Frequency Interference Statement
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
Please note:
The use of a non-shielded interface cable with this equipment is
prohibited.
B-2
Regulatory Information
Canada
Canadian Department of Communications
Radio Interference Regulations Class B Compliance Notice
This Class B digital apparatus meets all requirements of the Canada
Interference-Causing equipment regulations.
Cet appareil numérique de Classe B respecte toutes les exigences du
Règlement Canadien sur le matériel brouileur.
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques de la classe B
prescrites dans le Règlement sur le brouillage radioélectrique édicté par
le ministère des Communications du Canada.
Safety Notices
About the Battery
Caution Texts Concerning Lithium Batteries
DANISH
ADVARSEL! Lithiumbatteri – Eksplosionsfare ved fejlagtig håndtering.
Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det
brugte batteri tilbage til leverandøren.
NORWEGIAN
ADVARSEL: Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme
batteritype eller en tilsvarende type anbefalt av apparatfabrikanten.
Brukte batterier kasseres i henhold til fabrikantens instruksjoner.
SWEDISH
VARNING: Explosionsfara vid felaktigt batteribyte. Använd samma
batterityp eller en ekvivalent typ som rekommenderas av
apparattillverkaren. Kassera använt batteri enligt fabrikantens instruktion.
Regulatory Information
B-3
FINNISH
VAROITUS: Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda
paristo ainoastaan valmistajan suosittelemaan tyyppiin. Hävitä käytetty
paristo valmistajan ohjeiden mukaisesti.
ENGLISH
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type recommended by the equipment
manufacturer. Discard used batteries according to manufacturer's
instructions.
DEUTSCH
VORSICHT: Explosionsgefahr bei unsachgemäßem Austausch der
Batterie. Ersatz nur durch denselben oder einen vom Hersteller
empfohlenen gleich-wertigen Typ. Entsorgung gebrauchter Batterien
nach Angaben des Herstellers.
FRENCH
ATTENTION: II y a danger d’explosion s’il y a remplacement incorrect de
la batterie. Remplacer uniquement avec une batterie du même type ou
d’un type équivalent recommandé par le constructeur. Mettre au rebut
les batteries usagées conformément aux instructions du fabricant.
Attention (for USA Users)
The product that you have purchased contains a rechargeable battery.
The battery is recyclable. At the end of its useful life, under various state
and local laws, it may be illegal to dispose of this battery into the
municipal waste stream. Check with your local solid waste officials for
details in your area for recycling options or proper disposal.
About the AC Adapter
Use only the AC adapter supplied with your tablet PC. Use of another
type of AC adapter will result in malfunction and/or danger.
Do not use the adapter in a high moisture environment. Never touch
the adapter when your hands or feet are wet.
Allow adequate ventilation around the adapter when using it to
operate the device or charge the battery. Do not cover the AC
B-4
Regulatory Information
adapter with paper or other objects that will reduce cooling. Do not
use the AC adapter while it is inside a carrying case.
Connect the adapter to a proper power source. The voltage
requirements are found on the product case and/or packaging.
Do not use the adapter if the cord becomes damaged.
Do not attempt to service the unit. There are no serviceable parts
inside. Replace the unit if it is damaged or exposed to excess moisture.
About the Modem
Caution
Never install telephone wiring during a lightning storm.
Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
Never touch non-insulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
Use caution when installing or modifying telephone lines.
Avoid using the telephone function (other than a cordless type) during
an electrical storm. There may be a remote risk of electric shock from
lightning.
Do not use the telephone function to report a gas leak in the vicinity of
the leak.
Do not use this product near water, for example near a bathtub, wash
bowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
Caution (for USA Users)
To reduce the risk of fire, use only No.26 AWG or larger telecommunication
line cord.
Regulatory Information
B-5
On the Use of the RF Device
NOTE: The information in this section applies to models with the wireless LAN
module.
USA and Canada Safety Requirements and Notices
IMPORTANT NOTE:
This tranmitter must not be colocated or operating in conjunction with any
other antenna or transmitter. This equipment complies with FCC RF exposure
limits set forth for an uncontrolled environment. This device was tested for typical
laptop operations with the device contacted directly to the human body to the
back side of the tablet computer. To maintain compliance with FCC RF exposure
compliance requirements, avoid direct contact to the transmitting antenna during transmitting.
Radio Frequency Interference Requirements and SAR
The FCC with its action in ET Docket 93-62 has adopted a safety standard
for human exposure to Radio Frequency (RF) electromagnetic energy
emitted by FCC certified equipment. The wireless LAN module meets the
Human Exposure limits found in OET Bulletin 65, 2001, and ANSI/IEEE C95.1,
1992. Proper operation of this radio according to the instructions found in
this manual will result in exposure substantially below the FCC’s
recommended limits. The following safety precautions should be
observed:
Do not touch or move antenna while the unit is transmitting or
receiving.
Do not hold any component containing the radio such that the
antenna is very close or touching any exposed parts of the body,
especially the face or eyes, while transmitting.
Do not operate the radio or attempt to transmit data unless the
antenna is connected; if not, the radio may be damaged.
Use in specific environments:
B-6
The use of wireless devices in hazardous locations is limited by the
constraints posed by the safety directors of such environments.
Regulatory Information
z
The use of wireless devices on airplanes is governed by the Federal
Aviation Administration (FAA).
The use of wireless devices in hospitals is restricted to the limits set forth
by each hospital.
Explosive Device Proximity Warning
WARNING: Do not operate a portable transmitter (such as a wireless network
device) near unshielded blasting caps or in an explosive environment
unless the device has been modified to be qualified for such use.
Use on Aircraft Caution
CAUTION: Regulations of the FCC and FAA prohibit airborne operation of
radio-frequency wireless devices because their signals could interfere with
critical aircraft instruments.
Regulatory Information
B-7
EMC Requirements
This device complies with part 15 of the FCC Rules. Operation is subject to the following
Operation is subject to the following to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Operation on the 5.15-5.25GHz frequency band is restricted to indoor use only.
The FCC requires indoor use for the 5.15-5.25GHz band to reduce the potential for
harmful interference to co-channel Mobile Satellite Systems.
Therefore, it will only transmit on the 5.25-5.35 GHz, 5.47-5.725 GHz
and 5.725 –5.850 GHz band when associated with an access point (AP).
RF EXposure information
This device uses, generates and radiates radio frequency energy. The
radio frequency energy produced by this device is well below the
maximum exposure allowed by the Federal Communications Commission
(FCC).
B-8
Regulatory Information
Canada Radio Frequency Interference Requirements
To prevent radio interference to the licensed service, this device is
intended to be operated indoors and away from windows to provide
maximum shielding. Equipment (or its transmit antenna) that is installed
outdoors is subject to licensing.
Pour empêcher que cet appareil cause du brouillage au service faisant
l'objet d'une licence, il doit être utilisé à l'intérieur et devrait être placé loin
des fenêtres afin de fournir un écran de blindage maximal. Si le matériel
(ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet
d'une licence.
European Union CE Marking and Compliance
Notices
Statements of Compliance
English
This product follows the provisions of the European Directive 1999/5/EC.
Danish
Dette produkt er i overensstemmelse med det europæiske direktiv
1999/5/EC.
Dutch
Dit product is in navolging van de bepalingen van Europees Directief
1999/5/EC.
Finnish
Tämä tuote noudattaa EU-direktiivin 1999/5/EC määräyksiä.
French
Ce produit est conforme aux exigences de la Directive Européenne
1999/5/EC.
Regulatory Information
B-9
German
Dieses Produkt entspricht den Bestimmungen der Europäischen Richtlinie
1999/5/EC.
Greek
To προϊόν αυτό πληροί τις προβλέψεις της Ευρωπαϊκής Οδηγίας
1999/5/EC.
Icelandic
Þessi vara stenst reglugerð Evrópska Efnahags Bandalagsins númer
1999/5/EC.
Italian
Questo prodotto è conforme alla Direttiva Europea 1999/5/EC.
Norwegian
Dette produktet er i henhold til bestemmelsene i det europeiske direktivet
1999/5/EC.
Portuguese
Este produto cumpre com as normas da Diretiva Européia 1999/5/EC.
Spanish
Este producto cumple con las normas del Directivo Europeo 1999/5/EC.
Swedish
Denna produkt har tillverkats i enlighet med EG-direktiv 1999/5/EC.
Local Restrictions of 802.11a/g/n Radio Usage
CAUTION: Due to the fact that the frequencies used by 802.11a/g/n wireless
LAN devices may not yet be harmonized in all countries, 802.11a/g/n
products are designed for use only in specific countries or regions, and is
not allowed to be operated in countries or regions other than those of
designated use. As a user of these products, you are responsible for
ensuring that the products are used only in the countries or regions for
which they were intended and for verifying that they are configured with
the correct selection of frequency and channel for the country or region
of use. Any deviation from permissible settings and restrictions in the
country or region of use could be an infringement of local law and may
be punished as such.
B-10
Regulatory Information
The European variant is intended for use throughout the European
Economic Area. However, authorization for use is further restricted in
particular countries or regions within countries, as follows:
General
European standards dictate maximum radiated transmit power of
100 mW Effective Isotropic Radiated Power (EIRP) and the frequency
range 2400 – 2483.5 MHz.
Belgium and the Netherlands
In Belgium and the Netherlands, the product may not be used outdoors.
See the instructions next under the heading “Turning Off the Wireless LAN
Radio.”
France
Departments in Which the Wireless LAN Module Can Be Used (Indoors Only)
The wireless LAN module can currently be used indoors only in the
following 38 departments of mainland France. Please turn off your wireless
LAN radio when operating the device in areas/places other than the 38
departments listed:
01 A in Orientales
36
Indre 66
02 A isne
37
Indre et Loire
67 Bas Rhin
03 A llier
41
Loir et Cher
68 Haut Rhin
05 Haut es Alpes
42
Loire 70
Haute Saône
08 A rdennes
45
Loiret 71
Saône et Loire
09 A riège
50
Manche 75
Paris
11 A ude
55
Meuse 8
12 A veyron
58
Nièvre 84
Vaucluse
16 Charent e
59
Nord 88
Vosges
24 Dord ogne
60
Oise 89
Yonne
Pyrénées
2 Tarn et Garonne
Regulatory Information
B-11
25 Doubs
61
Orne 90
26 Drôme
63
Puy du Dôme
32 Gers
64
Pyrénées
Atlantique
Territoire de
Belfort
94 Val de Marne
Departments in Which the Wireless LAN Module’s Maximum EIRP Not
Shown in the Previous Table
Frequency Ranges
(MHz)
Indoors
Outdoors
2400 – 2446.5
10 mW
Not permitted
2446.5 – 2483.5
100 mW
100 mW on private property with
Ministry of Defense approval
Turning Off the Wireless LAN Radio
NOTE: Turning the wireless LAN radio off is not the same as disabling the
wireless LAN card. It is not necessary to disable the card to meet the
regulatory requirements.
While operating the tablet PC in those French departments that do not
allow use of the wireless LAN equipment, the user of the equipment must
turn off the wireless LAN radio in order to comply with local regulations
(see Chapter 2 for more information).
B-12
Regulatory Information

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
XMP Toolkit                     : 3.1-702
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2010:06:25 13:35:30-04:00
Create Date                     : 2010:05:04 19:38:53+08:00
Metadata Date                   : 2010:06:25 13:35:30-04:00
Format                          : application/pdf
Title                           : Microsoft Word - E100 English Manual 00.doc
Creator                         : jeffrey.cheng
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:94e5aed6-c28f-494e-b957-c4d12b21b52d
Instance ID                     : uuid:1f459381-f664-41cd-b5cf-5c4299429f3d
Has XFA                         : No
Page Count                      : 132
Author                          : jeffrey.cheng
EXIF Metadata provided by EXIF.tools
FCC ID Filing: QYLEA01

Navigation menu