Getac Technology PS535F PDA User Manual User s Manual EN

Getac Technology Corporation PDA User s Manual EN

Users Manual

PS535F
2009/12 Trademarks Microsoft, Windows, the Windows logo, Windows Media, Outlook and ActiveSync are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Microsoft products are licensed to OEMs by Microsoft Licensing, Inc., a wholly owned subsidiary of Microsoft Corporation. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. All other brand and product names are trademarks or registered trademarks of their respective companies. Disclaimer Specifications and manuals are subject to change without notice. GETAC assumes no liability for damage incurred directly or indirectly from errors, omissions, or discrepancies between the device and the manuals.
i Table of Contents Table of Contents .................................................................................. i 1 Getting Started ............................................................................... 1 1.1 Identifying Hardware Components ...................................................... 1 Front Components ............................................................................... 1 Back Components ............................................................................... 3 Left-Side Components ......................................................................... 4 Top Components ................................................................................. 5 Bottom Components ............................................................................ 5 1.2 Getting Your Device Ready for Use .................................................... 6 Installing the Battery ............................................................................ 6 Performing Initial Startup ..................................................................... 7 Connecting to AC Power and Charging the Battery ............................ 8 1.3 Synchronizing with Your Computer ..................................................... 9 Installing ActiveSync or WMDC ........................................................... 9 1.4 Using an SD/SDHC/MMC Card ......................................................... 11 2 Basic Skills ................................................................................... 12 2.1 Power Saving and Turning Off .......................................................... 12 Backlight Off ...................................................................................... 12 Entering the Suspend Mode .............................................................. 12 Turning Off ......................................................................................... 12 2.2 Using the Stylus ................................................................................. 13 2.3 Using the Navigation Stick ................................................................. 13 2.4 Today Screen .................................................................................... 14 Landscape View ................................................................................ 14 2.5 Navigation Bar and Toolbar ............................................................... 15 2.6 Running Programs ............................................................................. 16 2.7 Shortcut Menus .................................................................................. 16 2.8 Notifications ....................................................................................... 17
ii 2.9 Entering Information .......................................................................... 17 Entering Text Using the Input Panel .................................................. 17 Writing on the Screen ........................................................................ 19 Drawing on the Screen ...................................................................... 20 Recording a Message ........................................................................ 20 2.10 Locking Your Pocket PC .................................................................... 22 3 Managing Your Pocket PC .......................................................... 23 3.1 Managing Power ................................................................................ 23 Low Battery Signals and Actions ....................................................... 23 Power-Saving Tips ............................................................................. 24 3.2 Customizing Your Pocket PC ............................................................ 25 3.3 Searching and Organizing Information .............................................. 27 4 Microsoft Pocket Outlook ........................................................... 28 4.1 Calendar: Scheduling Appointments and Meetings .......................... 28 Creating an Appointment ................................................................... 29 Using the Calendar Summary Screen ............................................... 30 4.2 Contacts: Tracking Friends and Colleagues ..................................... 31 Creating a Contact ............................................................................. 31 Using the Contacts Summary Screen ............................................... 32 4.3 Tasks: Keeping a To Do List ............................................................. 33 Creating a Task ................................................................................. 34 Using the Tasks Summary Screen .................................................... 35 4.4 Notes: Capturing Thoughts and Ideas ............................................... 36 Creating a Note .................................................................................. 37 4.5 E-mail: Sending and Receiving E-mail Messages ............................. 38 Synchronizing E-mail Messages ....................................................... 38 Connecting Directly to an E-mail Server ............................................ 38 Using the Message List ..................................................................... 39 Composing and Sending Messages .................................................. 40 Managing Email Messages and Folders ........................................... 41 5 More Programs ............................................................................ 42 5.1 Microsoft ActiveSync ......................................................................... 42 Synchronizing Data ............................................................................ 43 5.2 Office Mobile ...................................................................................... 44 Creating an Office File ....................................................................... 44 Opening an Office File ....................................................................... 45 5.3 Windows Live Messenger .................................................................. 46 Setting up Windows Live ................................................................... 46 Signing in to Messenger .................................................................... 46 5.4 Using Internet Explorer Mobile .......................................................... 47
iii Browsing the Internet ......................................................................... 48 5.5 Windows Media Player for Pocket PC ............................................... 49 5.6 Pictures & Videos .............................................................................. 50 5.7 Camera .............................................................................................. 51 Taking Pictures .................................................................................. 51 Recording Video Clips ....................................................................... 53 Camera Controls, Options, and Settings ........................................... 54 5.8 Additional Programs .......................................................................... 55 E-Compass ........................................................................................ 55 TacLink .............................................................................................. 57 6 Getting Connected ....................................................................... 59 6.1 Wireless Network Connection ........................................................... 59 Turning On and Off the Wi-Fi Radio .................................................. 59 Connecting to a Wireless Network .................................................... 60 Starting and Ending the Wireless Network Connection ..................... 60 6.2 Bluetooth Feature .............................................................................. 61 Turning On and Off the Bluetooth Radio ........................................... 61 Transferring Files via Bluetooth Technology ..................................... 62 Bluetooth Partnership ........................................................................ 63 7 Troubleshooting and Maintenance ............................................ 64 7.1 Resetting Your Pocket PC ................................................................. 64 7.2 Restoring the Factory Default State .................................................. 65 7.3 Troubleshooting ................................................................................. 66 Power Problems ................................................................................ 66 Memory Problems .............................................................................. 66 Screen Problems ............................................................................... 67 Connection Problems ........................................................................ 68 7.4 Taking Care of Your Pocket PC ........................................................ 69 General Guidelines ............................................................................ 69 Travel Guidelines ............................................................................... 70 8 Regulatory Information ............................................................... 72 8.1 Regulations Statements..................................................................... 72 European Notice ................................................................................ 72 FCC CAUTION .................................................................................. 73 8.2 Safety Precautions ............................................................................. 74 About Charging .................................................................................. 74 About the Charger ............................................................................. 74 About the Battery ............................................................................... 75 About the Radio Frequency Exposure ............................................... 75
iv
1 1 Getting Started This chapter introduces you to the external components of your Pocket PC and guides you through the process of setting up your Pocket PC for use. NOTE: Depending on the model you purchased, the cabinet color and the look of the accessories may be different from the ones shown in this manual. 1.1 Identifying Hardware Components Front Components
2 Ref Component Description  RF Indicator Glows in blue to indicate that RF is on or active.  Multi-Functional Indicator Glows in green to indicate that battery is fully charged. Glows in amber to indicate that battery charging is in progress. Glows in red to indicate that battery power is low. Flashes in red (when AC adapter is not plugged) /amber/ green alternately (when AC adapter is plugged) when a notification comes up.  Touch Screen Displays the output of your Pocket PC. Tap the screen with the stylus to select menu commands or enter information.  Program Buttons Each of the three buttons provides a quick way to use a program or function. The buttons are customizable. The icons on the buttons indicate the default functions: Contacts Start Menu GPS Application NOTE: The buttons can provide different functions if you are using a navigation software that allows you to define the buttons.  Navigation Stick Moves up, down, left or right by pushing the button toward the corresponding direction. Selects by pressing.  Microphone Receives sound and voice to record voice.  Power Button Turns your Pocket PC on or off by pressing briefly.
3 Back Components Ref Component Description  Stylus Tap on the touch screen to make selections and enter information. Pull the stylus out of its slot to use and store it in the slot when not in use.  Car Antenna Connector This connector (under rubber dust cover) allows use of an optional external antenna with magnetic mount, which may be positioned on top of the car for better signal reception in areas with poor reception.  CMOS Camera Lens Allows you to use your Pocket PC‘s camera function.  Speaker Sends out music, sounds, and voice.  Battery Cover Inside is the battery.
4 Left-Side Components Ref Component Description  SD/MMC Slot Accepts an optional SD (Secure Digital) or MMC (MultiMediaCard) card for removable storage. NOTE: Be sure the rubber cover is tightly closed to prevent water damage.  Headphone Connector Connects to a pair of stereo headphones.
5 Top Components Ref Component Description  GPS Antenna Receives signals from the GPS satellites overhead. Bottom Components Ref Component Description  Power Connector Connects to the AC adapter for charging the battery.  Reset Button Restarts your Pocket PC.  Mini-USB Connector Connects to the USB cable for ActiveSync or charging.  ON/OFF Switch The main power/battery cutoff switch.  Hand String Hole Hand string attaches to this hole. WARNING: Be careful not to allow infants and small children play with the hand string stopper as this may easily be swallowed, thereby causing injury or choking.
6 1.2 Getting Your Device Ready for Use Installing the Battery 1. To remove the battery cover, unfasten the four screws using a tool such as a coin. 2. Fit the battery into place. 3. Replace the battery cover and tighten the four screws.
7 Performing Initial Startup Initial startup includes setting the ON/OFF switch and completing the setup wizard. 1. Slide the ON/OFF switch to the ON position. CAUTION: Always leave the ON/OFF switch in the ON position for normal operation. 2. Your device will automatically turn on. Charge the battery as described in the next sub-section. 3. Wait for a few seconds until the startup screen appears. Follow the onscreen instructions to complete the setup wizard. You will then see the Today screen.
8 Connecting to AC Power and Charging the Battery When charging the battery for the very first time, charge it for at least 8 hours. 1. Fit the converter plug to the AC charger (). 2. Connect the DC jack end of the AC adapter to your device () and the other end to a wall outlet (). 3. The multi-functional indicator glows amber when charging is in progress. Do not disconnect your Pocket PC from AC power until the battery is fully charged. This will take a couple of hours. CAUTION: For optimal performance of the lithium battery, take note of the following:  Use the included power adapter (for use with power supply model PC11R-050).  Do not charge the battery where the temperature is high (e.g. in direct sunlight).  There is no need to fully discharge the battery before charging. You can charge the battery before it is discharged.  If you will not use the product for a long period of time, be sure to fully charge the battery at least once every two weeks. Over discharge of the battery can affect the charging performance. NOTE: Your device can also be charged when it is connected to a desktop computer via the USB cable. Converter Plug
9 1.3 Synchronizing with Your Computer ActiveSync and Windows Mobile Device Center (WMDC) provide an easy way to synchronize data on a Windows-based computer with your device. ActiveSync works on computers that have the Windows XP operating systems. WMDC works only on computers that have Windows Vista or Windows 7. ActiveSync and WMDC act as gateways between your device and your computer for transferring Outlook e-mail, appointments, contacts, and tasks, and media such as pictures, music, and videos. You can also use the Explore feature in either program to move files or programs from your computer to your device. Installing ActiveSync or WMDC If you‘re using Windows XP or earlier versions of Windows, download and install the latest ActiveSync. If you‘re using Windows Vista or Windows 7, download and install the latest Windows Mobile Device Center 6.1. (Visit the Microsoft website to download the program and to obtain operating instructions.) NOTE:  Before installation, make sure that you have Microsoft Outlook installed on your computer.  Connect your device to the computer AFTER Windows Mobile Device Center or ActiveSync is installed.  ActiveSync connection problems may occur in some specific cases. They are likely caused by interoperability with desktop firewall applications or applications that manage network traffic. For troubleshooting information, visit the Microsoft web site.
10 After the software installation, connect your device to your computer with the USB cable and you are ready to synchronize.
11 1.4 Using an SD/SDHC/MMC Card Your Pocket PC has a SD/MMC slot where you can insert an optional Secure Digital or MultiMediaCard storage card. With the removable memory, you can store or backup your data and exchange data with other devices. NOTE:  A storage card is also called a memory card.  Make sure that no foreign objects enter the slot.  Keep a SD or MMC card in a well-protected box to avoid dust and humidity when you are not using it. To use a card, insert it into the slot, with the connector pointing to the slot and its label facing the front of the Pocket PC. Follow the instructions supplied with the card for more information. To remove a card, first make sure that no application is accessing the card, then slightly push the top edge of the card to release it and pull it out of the slot.
12 2 Basic Skills This chapter familiarizes you with the basic operations of your Pocket PC such as using the stylus, navigation stick, Today screen, menus, and programs. You will also know how to enter information and lock your Pocket PC. 2.1 Power Saving and Turning Off Backlight Off The backlight of the screen dims out after a period of inactivity (default 30 seconds while on battery power and 1 minute while on external power). To restore the backlight, tap the screen or press a button. Note that where you tap or what you press also causes the related task to be performed. Entering the Suspend Mode Your device automatically suspends after a period of inactivity (default 3 minutes while on battery power and 5 minutes while on external power). To manually suspend the device, briefly press the power button. To resume operation, press the power button. You will be back to where you left off. Turning Off If you will not be using the device for a long time, you can turn off the device by sliding the ON/OFF switch to the OFF position. To start using the device, slide the switch to the ON position.
13 2.2 Using the Stylus Use the stylus to navigate and select objects on the screen. Pull the stylus out of the slot and extend it for ease of use. Store it in the slot when not in use.  Tap Touch the screen once with the stylus to open items and select options.  Drag Hold the stylus on the screen and drag across the screen to select text and images. Drag in a list to select multiple items.  Tap and hold Tap and hold the stylus on an item to see a list of actions available for that item. On the shortcut menu that appears, tap the action you want to perform. 2.3 Using the Navigation Stick With the navigation stick, you can move up, down, left and right within a menu. This is particularly useful for one-hand operation. To move in a direction, simply push the stick toward the corresponding direction. To activate the selected item, press the stick. Up Left Right Down
14 2.4 Today Screen When you turn on your Pocket PC for the first time each day, you will see the Today screen. The Today screen shows your upcoming appointments, active tasks, and information about e-mail messages. Along the top of the Today screen you will see the volume icon, the clock, and connectivity indicators. You can tap a section of the Today screen to open the program that is associated with that section. The Today screen is accessible from anywhere by tapping and then Today. Landscape View You can use your Pocket PC in a landscape manner. To change the screen view, tap  Settings  System  Screen  General  Landscape or Portrait. Tap to change date and time. Tap to change volume or mute all sounds. Tap to switch to a program. Left Soft Key Right Soft Key Tap to connect. Your day at a glance. Tap an item to access associated program so that you can view or change information. Wireless network and Bluetooth status
15 2.5 Navigation Bar and Toolbar The Navigation bar is located at the top of the screen. It displays the active program and current time and allows you to switch programs and close screens. Tap to switch to the Start menu as shown below. The menu contains all the program icons. You can drag the screen up or down to see other icons. Use the toolbar at the bottom of the screen to perform tasks in programs. The toolbar includes a left soft key, a right soft key, and the Input panel button in between. The right soft key is usually Menu while the left soft key varies with programs. An example of the toolbar: Left Soft Key Right Soft Key Input panel button
16 2.6 Running Programs You can switch from one program to another without closing any program.  To run a program, tap at the left-top corner of the screen and select from the Start menu.  You can press a program button on the front of your Pocket PC. The icons on the buttons identify the default programs they are associated with. 2.7 Shortcut Menus With shortcut menus, you can quickly choose an action for an item. For example, you can use the shortcut menu in the contact list to quickly delete a contact, make a copy of a contact or send an email message to a contact. The actions in the shortcut menus vary from program to program. To access a shortcut menu, tap and hold the stylus on the name of the item that you want to perform the action on. When the menu appears, lift the stylus and tap the action you want to perform. Or tap anywhere outside the menu to close the menu without performing an action. Tap and hold to display the shortcut menu. Lift the stylus and tap the action you want. Tap outside the menu to close it without performing an action.
17 2.8 Notifications Your Pocket PC reminds you in a variety of ways when you have something to do. For example, if you have set up an appointment in Calendar, a task with a due date in Tasks or an alarm in Clock, you will be notified in any of the following ways:  A message appears on the screen.  A sound, which you can specify, is played.  The notification indicator flashes. To choose reminder types and sounds for your Pocket PC, tap  Settings  Personal  Sounds & Notifications. 2.9 Entering Information You have several options for entering new information:  Use the Input panel to enter typed text, either by using the soft keyboard or other input methods.  Write directly on the screen.  Draw pictures on the screen.  Speak into the microphone to record a message. Entering Text Using the Input Panel Use the Input panel to enter information in any program on your Pocket PC. You can either type using the soft keyboard or write using a recognizer. In any case, the characters appear as typed text on the screen. To show or hide the Input panel, tap the Input panel button. Tap the arrow next to the Input panel button to see your choices.
18 When you use the Input panel, your Pocket PC anticipates the word you are typing or writing and displays it above the Input panel. When you tap the displayed word, it is inserted into your text at the insertion point. The more you use your Pocket PC, the more words it learns to anticipate. Recognizer NOTE: The availability of recognizers depends on the region and the language version you purchased. With a recognizer, you can write letters using the stylus just as you would use a pen on paper. When you write a letter, it is converted to typed text that appears on the screen. For specific instructions on using a recognizer, open a recognizer and then tap the question mark next to the writing area. Select an input method. Input panel button. Tap to see your choices. Tap here if this is the right word.
19 Writing on the Screen In any program that accepts writing, such as the Notes program, you can use your stylus to write directly on the screen. Write the way you do on paper. You can edit and format what you have written and convert the information to text later. To write on the screen, tap Menu  Draw to switch to drawing mode. A check () appears before the command. NOTE: Not all programs support the drawing mode.
20 Drawing on the Screen You can draw on the screen in the same way that you write on the screen. 1. Tap Menu  Draw to enable drawing mode. A check () appears before the command. 2. To create a drawing, cross three ruled lines on your first stroke. A drawing box appears. 3. Subsequent strokes in or touching the drawing box become part of the drawing. Drawings that do not cross three ruled lines will be treated as writing. Recording a Message You can quickly capture thoughts, reminders and phone numbers by recording a message. In the Notes program, you can either create a stand-alone recording or include a recording in a written note. If you want to include the recording in a note, open the note first. In the Messaging program, you can add a recording to an email message. To create a recording: 1. Tap  Notes to switch to the program. 2. Tap Menu  View Recording Toolbar to show the Recording toolbar. The drawing box indicates the boundaries of the drawing.
21 3. Hold the Pocket PC‘s microphone near your mouth or other source of sound. 4. Tap the Record button on the Recording toolbar to start recording. 5. To stop recording, tap the Stop button on the Recording toolbar. The new recording appears in the note list or as an embedded icon. To play a recording, tap it in the list or tap its icon in the note. Recording Formats Your Pocket PC supports several formats for voice notes. The formats vary in both the quality of the recording and the size of the sound file. When selecting a recording format, you should consider the quality you need as well as how much storage memory the recording will use on your Pocket PC. Not all recording formats are compatible with other software or computers. If you will share your recordings with others or transfer a recording to your desktop computer, be sure to choose a recording format that is supported by the software used to play recordings on the other computer. To select a recording format: 1. Tap  Settings  Personal  Input. 2. On the Options tab in the Input control panel, select a voice recording format from the drop-down list. Indicates an embedded recording. Recording toolbar
22 2.10 Locking Your Pocket PC When not using your Pocket PC, you can use the lock function so that accidental touching of the device does not cause your Pocket PC to operate. To lock your Pocket PC, tap Device unlocked on the Today screen. Your Pocket PC will not respond to any tapping of the screen (except the left soft key Unlock) or pressing of the buttons (except the power button). To unlock, tap Unlock (left soft key) and tap Unlock. Tap to lock the device. Tap to unlock
23 3 Managing Your Pocket PC This chapter tells you how to effectively manage power, settings, data and programs of your Pocket PC. 3.1 Managing Power A fully charged battery should provide power for up to 8 hours of use. The operating time of a fully charged battery depends on how you are using the Pocket PC. Some functions, such as using multimedia or operating a SD/MMC card, may consume the battery power considerably. Low Battery Signals and Actions CAUTION: When you recharge the battery upon a warning of low power, you should charge for at least 30 minutes. If you unplug the AC charger soon, you may not have sufficient battery power for your operation. You can monitor the battery power by tapping  Settings  System  Power. The remaining power is displayed on a status bar in the Power control panel. When the battery is low, your Pocket PC will pop up a warning message and a beep will sound. You should save your data and recharge the battery immediately upon a warning of low power; otherwise your Pocket PC will turn off automatically. You need to connect the Pocket PC to external AC power for charging before you can use it again.
24 Power-Saving Tips Follow these suggestions to maximize the battery‘s operating time, particularly when you are relying solely on the battery power for extended time periods.  Suspend frequently. By default, the screen backlight will automatically turn off and the Pocket PC will also turn off when it has been idle for a period of time. You can shorten the length of the idle time using  Settings  System  Power  Advanced to set up. Press the power button to turn off your Pocket PC when it is not in use, even for a short time. You can also manually turn off the backlight by pressing and holding the power button.  Turn off functions not needed or adjust settings.  Lower the volume.  Do not enable sounds or light flashing except for the most necessary notifications. (Tap  Settings  Personal  Sounds & Notifications to set up.)  Avoid power-consuming situations such as:  Using a modem or other peripheral  Playing sound or music  Recording  Using or monitoring wireless signals
25 3.2 Customizing Your Pocket PC NOTE: Incorrect settings may cause your system to malfunction. Make sure that you fully understand the function of a certain item before any adjustment. You can customize the settings of the Pocket PC to your own preferences. Tap  Settings. The items you can customize are described as follows: Items Descriptions Bluetooth To set up or change the Bluetooth connection. (See Section 6.2 for more information.) Clock & Alarms To change the time and date and to set alarms. Lock To set a password for security. Sounds & Notifications To set the conditions and types of the sounds, system volume and ways of notifications. Today To select the information you want displayed on the Today screen and to select a desired theme for the background. Connections Beam To receive information and files via Bluetooth technology. Connections To set up or change connection information. (See Section 6.1 for more information.) Domain Enroll To connect your device with company resources. You will need the enrollment password provided by your system administrator. USB to PC To change the type of USB connection your device is using and to enable advanced network functionality. Wi-Fi To configure the wireless network module. Wireless Manager To change the Wi-Fi and Bluetooth radio status. (See Section 6.1 and 6.2 for more information.) Personal Buttons To assigns programs to the hardware buttons and set the repeat rate of the up/down control. Input To set up items related to the input methods and voice recording format. Owner Information To enter your personal information.
26 Items Descriptions System About To show the hardware information of the Pocket PC and to define the device name for identifying itself to other computers. Backlight To adjust the brightness level of the display and to set the automatic turnoff for power saving purposes. Certificates To establish your identity or the identity of other computers. This helps prevent unauthorized users from accessing your Pocket PC and information. Customer Feedback To feedback to Microsoft of your experience in using the Windows Mobile software. Encryption To encrypt files when they are placed on a storage card. Error Reporting To enable or disable error reporting to Windows Mobile technical support group. External GPS To configure the GPS hardware settings and manage GPS. Managed Programs To show the installation history of managed programs. Memory To view the system memory or the memory on the storage card (if installed) and to manually stop a program if it becomes unstable or program memory is low. Power To show the remaining battery power and to set the time for the Pocket PC to turn off automatically. Regional Settings To specify the region of your location and the formats of the number, currency, time and date. Remove Programs To remove programs you added to the RAM of your Pocket PC. SBAS Setting To enable SBAS (WAAS, MSAS, ENGOS) function. A SBAS-capable receiver can give you a better position accuracy. Screen To set the orientation of the screen to portrait or landscape. To adjust the touch screen for accurate screen taps. To adjust the text size to see more content or increase the readability in many programs. System Information To view system information.
27 Items Descriptions Task Manager To view or perform task management of programs. 3.3 Searching and Organizing Information The Search feature on your Pocket PC helps you quickly locate information. To search a file, tap  Search Phone. Enter the text you want to find, select a data type and then tap Search to start the search. You can also use the File Explorer to find files on your Pocket PC and to organize these files into folders. Tap  File Explorer. NOTE: You can move files in File Explorer by tapping and holding the item you want to move, tapping Cut or Copy on the shortcut menu, browsing to the new location and then tapping Paste.
28 4 Microsoft Pocket Outlook Microsoft Pocket Outlook includes Calendar, Contacts, Tasks, Notes, and Messaging. You can use these programs individually or together. For example, e-mail addresses stored in Contacts can be used to address e-mail messages in Messaging. 4.1 Calendar: Scheduling Appointments and Meetings Use Calendar to schedule appointments, including meetings and other events. You can check your appointments in one of several views (Agenda, Day, Week, Month and Year) and set Calendar to remind you of appointments with a sound or other method. Appointments for the day can be displayed on the Today screen. Tap  Calendar to switch to the program. Tap to go to today. Tap to display or edit the appointment details. Tap to switch to another view.
29 Creating an Appointment 1. In Day or Week view, tap the desired date and time for the appointment. 2. Tap Menu  New Appointment. 3. Using the Input panel, tap first to select the field, and then enter a description and a location. 4. If needed, tap the date and time to change them. 5. Enter other desired information. You will need to hide the Input panel to see all available fields. 6. Tap OK to save and return to Calendar. Tap to choose from predefined text. Tap to choose from previously entered locations.
30 Using the Calendar Summary Screen When you tap an appointment in Calendar, a summary screen is displayed. To change the appointment, tap Menu  Edit. View appointment details. View notes. Tap to send e-mail to the attendees if they are added to your appointment.
31 4.2 Contacts: Tracking Friends and Colleagues Contacts maintains a list of your friends and colleagues so that you can easily find the information you are looking for, whether you are at home or on the road. Tap  Contacts to switch to the program. Creating a Contact 1. In Contacts, tap New. Tap and enter part of a name or number to quickly find a contact in the list. Tap to display or edit the contact details. Tap an alphabet group to scroll the contact list.
32 2. Using the Input panel, enter a name and other contact information. You will need to scroll down to see all available fields. 3. Tap OK to save and return to the contact list. Using the Contacts Summary Screen When you tap a contact in the contact list, a summary screen is displayed. To change the contact information, tap Edit.
33 4.3 Tasks: Keeping a To Do List Use Tasks to keep track of what you have to do. Tap  Tasks to switch to the program. Tap to quickly create a task with only a subject Tap to display or edit the task details.
34 Creating a Task 1. In Task, tap Menu  New Task. 2. Using the Input panel, enter a description. 3. You can enter a start date and due date or enter other information by first tapping the field. If the Input panel is open, you will need to hide it to see all available fields. 4. Tap OK to save and return to the task list. Tap to choose from predefined subjects.
35 Using the Tasks Summary Screen When you tap a task in the task list, a summary screen is displayed. To change the task, tap Edit. Tap to show and hide additional summary information. View notes.
36 4.4 Notes: Capturing Thoughts and Ideas Quickly capture thoughts, reminders, ideas, drawings and phone numbers with Notes. You can create a written note or a recording. You can also include a recording in a note. If a note is open when you create the recording, it will be included in the note as an icon. If the note list is displayed, it will be created as a stand-alone recording. Tap  Notes to switch to the program. Tap to change the sort order of the list. Tap to open a note or play a recording.
37 Creating a Note 1. In Notes, tap New. 2. Create your note by writing, drawing, typing, or recording. For more information about using the Input panel, writing, and drawing on the screen and creating recordings, see Section 2.8. 3. Tap OK to save and return to the note list.
38 4.5 E-mail: Sending and Receiving E-mail Messages You can use E-mail to send and receive email messages in two ways:  By synchronizing email messages with Microsoft Exchange or Microsoft Outlook on your desktop computer.  By connecting directly to an e-mail server through an ISP (Internet Service Provider) or a network. Tap  E-mail to switch to the program. Synchronizing E-mail Messages E-mail messages can be synchronized as part of the general synchronization process. To do this, you need to enable Inbox synchronization in ActiveSync/Mobile Device Center. For information on enabling Inbox synchronization, see ActiveSync Help on the desktop computer. Connecting Directly to an E-mail Server You can send and receive email messages by connecting to a POP3 or IMAP4 e-mail server if you can connect to your ISP or local area network. (For information on connection, see Section 6.1.) Setting up an Email Service You can use multiple email services to receive your messages. For each email service you intend to use, first set up and name the email service. Tap Setup E-mail. Follow the directions in the E-mail Setup Wizard.
39 Using the Message List Messages you receive are displayed in the message list. When you receive a message, tap it to open it. Select the sort order for messages. Tap to open a message. Select the service and folder you want to display.
40 When you connect to your email server or synchronize with your desktop computer or server, by default, you will receive messages from the last three days only and the first 2 KB of each new message, and not to sync file attachments. The original messages remain on the server or your desktop computer. You can mark the messages that you want to retrieve in full during your next synchronization or email server connection. In the message list, tap and hold the message you want to retrieve. On the shortcut menu, tap Download Message. The icons in the Inbox message list give you visual indications of message status. Composing and Sending Messages 1. Select the account you have set in E-mail. 2. In the message list, tap Menu  New. 3. In the To field, enter an email address of one or more recipients, separating them with a semicolon. If the address is already in your contact list, you can tap To to select the e-mail address. 4. Enter your message. 5. To check spelling, tap Menu  Spell Check. 6. If you want to attach a file to the message, tap Menu  Insert and select the desired file.
41 NOTE: OLE objects cannot be attached to Inbox messages. 7. Tap Send when you have finished the message. If you are working offline, the message is moved to the Outbox folder and is sent the next time you connect. The message is placed in the Outbox folder on your Pocket PC and will be delivered in one of two ways:  The message is transferred to the Outbox folder in Exchange or Outlook on your desktop computer and sent the next time you synchronize.  The message is transferred to your email server the next time you connect. Managing Email Messages and Folders Each e-mail service account has its own folder hierarchy with five default folders: Inbox, Outbox, Deleted Items, Drafts and Sent Items. The messages you receive and send through the mail service are stored in these folders. You can also create additional folders within each hierarchy. To create folders, tap Menu  Tools  Manage Folders. The Deleted Items folder contains messages that have been deleted on your Pocket PC. The behaviour of the Deleted and Sent Items folders depends on the options you have chosen. NOTE: If you use POP3 and you move email messages to a folder you created, the link is broken between the messages on the Pocket PC and their copies on the mail server. The next time you connect, the mail server sees that the messages are missing from the Pocket PC Inbox and deletes them from the server.
42 5 More Programs In addition to Microsoft Pocket Outlook, there are other programs built into your Pocket PC. This chapter tells you how to use these programs. NOTE: Depending on the continuing developments of the product, the software supplied with the device may be changed or updated. If there is any difference between the information in this manual and your product, the operation should be based on the product you have. 5.1 Microsoft ActiveSync ActiveSync on your device works with ActiveSync on a Windows XP computer and with Windows Mobile Device Center on a Windows Vista/Windows 7 computer. When you have established the connection between your device and your computer, you can synchronize the information between the two with ActiveSync. Synchronization compares the data on the two sides and updates both computers with the most recent information. For example, you can:  Keep your Pocket Outlook Contacts, Calendar and Tasks databases up-to-date by synchronizing your Pocket PC with Microsoft Outlook data on your desktop computer.  Synchronize email messages in your Pocket PC Inbox with email messages in Microsoft Outlook on your desktop computer.  Synchronize Microsoft Word, Excel, and PowerPoint files between your Pocket PC and desktop computer. Your files are automatically converted to the correct format. You can select which information types are synchronized and control how much data is synchronized. (See the ActiveSync or Windows Mobile Device Center help on your computer.)
43 With ActiveSync, you can also:  Copy (rather than synchronize) files between your Pocket PC and desktop computer.  Add and remove programs on your Pocket PC.  Pass through your desktop computer to a network or the Internet. Synchronizing Data Once you have created a synchronization relationship and completed the first synchronization, you can initiate synchronization from your Pocket PC. 1. Connect your Pocket PC to your desktop computer. 2. On your Pocket PC, tap  ActiveSync. 3. Tap Sync to begin synchronization.
44 5.2 Office Mobile Microsoft Office Mobile works with Microsoft Office on your computer to give you easy access to copies of your Office files. Tap  Office Mobile and select the program to use.  Excel Mobile  OneNote Mobile  PowerPoint Mobile  Word Mobile Creating an Office File NOTE: You cannot create or edit PowerPoint presentations on your device. 1. Tap  Office Mobile and select the program to use. 2. Enter the information. (For more information on using the input panel, see Section 2.8 or Pocket PC Help.) Excel Mobile Word Mobile
45 OneNote Mobile 3. When you have finished entering the information and tap OK, the file is automatically saved and named according to the first characters of text entered in the file. Opening an Office File Whenever you switch to an Office Mobile program, you will see the file list. Tap the desired file to open it. You can open only one file at a time; when you open a second file, the first will be saved and closed automatically.
46 5.3 Windows Live Messenger Windows Live Messenger provides practically instant access to your up-to-date MSN Hotmail Inbox, your Messenger Contacts list, and options for customizing your Messenger experience. With Windows Live Messenger, you get:  MSN Hotmail Read, write and send e-mail. Delete e-mail and manage your Hotmail folders.  MSN Messenger See who is online. Send and receive instant messages. Subscribe to status updates for selected contacts so you are notified when they are online.  Synchronize the Windows Live contacts, Hotmail inbox and MSN Messenger to your device. You need to connect to the internet before using Windows Live. (For more information on the connection, see Chapter 6.) NOTE: Leaving Windows Live active for a long period of time will consume more power. To use Windows Live, you need to create a MSN Hotmail, MSN Messenger or Windows Passport account. Setting up Windows Live 1. Tap  Windows Live to switch to the program. 2. Tap Sign in to Windows Live. 3. Tap Accept to proceed. 4. Follow the on-screen instructions to complete the setup. Signing in to Messenger Before you sign in to Messenger, you need to sign in to Windows Live first. 1. Tap  Messenger to switch to the program. 2. Tap Sign in.
47 5.4 Using Internet Explorer Mobile Use Internet Explorer Mobile to view Web pages in either of these ways:  Connect to an ISP or network and browse the Web. To do this, you will need to create the connection first, as described in Section 6.1 and 6.2.  During synchronization with your desktop computer, download your favorite links and mobile favorites that are stored in the Mobile Favorites subfolder in Internet Explorer on the desktop computer. While you are connected to an ISP or network, you can also download files and programs from the Internet or an intranet. Tap  Internet Explorer to switch to the program. The Internet Explorer Mobile home page appears:
48 Browsing the Internet 1. Tap  Internet Explorer. 2. Tap the Favorites soft key to display the Favorites list. 3. Tap the page that you want to view. NOTE: If a favorite link is dimmed or you receive a message that the page is not available, you must download the page to your device through synchronization or connect to the Internet. To visit web pages not included in Favorites, in the address bar that appears at the top of the screen, enter the web address you want to visit and then tap . Or, tap the arrow to choose from previously entered addresses.
49 5.5 Windows Media Player for Pocket PC Use Microsoft Windows Media Player for Pocket PC to play digital audio and video files that are stored on your Pocket PC or on a network, such as on a Web site. Tap  Windows Media to switch to the program. Library Screen Playback Screen You can play files in either Windows Media or MP3 format (this include files with the extension.asf, .wma, .wmv and.mp3). Use Microsoft Windows Media Player on your desktop computer to copy digital audio and video files to your Pocket PC.
50 5.6 Pictures & Videos With Pictures & Videos, you can:  View pictures and video clips.  Send pictures and videos to others.  Set a picture as the background on the Today screen.  Play slide show.  Edit your pictures. Tap  Pictures & Videos to switch to the program. Select the type of folder you want displayed in the list. Tap to change the sort order of the list. Tap to view a picture in full screen. Tap to take pictures using the camera lens located on the back of the Pocket PC.
51 5.7 Camera The Camera program allows you to take pictures and record video clips. Taking Pictures 1. Tap  Pictures & Videos  Camera. The Camera screen appears. Below the display area are indicators of the current status. 2. For camera controls such as brightness and zooming, tap Menu. Display area Current status
52 NOTE: By default, the display area blanks out and shows the word “Standby” when the camera has been idle for one minute. To resume, tap the screen. 3. Aim the camera lens at the subject. Press the program button 1 (the one labeled ) for automatic focusing. A white frame appears. Wait until the color of the frame turns green indicating the subject is in focus. 4. Press the navigation stick to take the picture. 5. The result shows on the screen if the picture was taken in Normal or Timer mode. At this time, you can tap Menu to perform a desired task to the current picture. Tap Camera or ok to go back to the Camera screen. 6. The picture is saved to the predefined storage location (as long as you didn‘t delete it in the previous step). Menu Items Descriptions Mode Three choices: 1. Normal 2. Burst – Continuous shooting of 5 pictures 3. Timer – 5 second countdown before shooting Brightness Seven brightness levels Resolution Six choices from 160x120 to 2048x1536 (640x480 by default) Zoom Available choices depend on the resolution. White Balance Five choices from which you can select one that matches the current light source. Full Screen Full screen on and off. Options Overall settings to the Camera program.
53 Recording Video Clips 1. Tap  Pictures & Videos  Camera. 2. Tap Menu  Video to switch to the video mode. Below the display area are indicators of the current status. 3. For recording controls such as brightness and white balancing, tap Menu. NOTE: By default, the display area blanks out and shows the word “Standby” when the camera has been idle for one minute. To resume, tap the screen. 4. Press the navigation stick to start recording. If needed, you can tap Pause to temporarily pause the recording and then tap Resume to continue. Menu Items Descriptions Brightness Seven brightness levels Quality 176 x144 White Balance Five choices from which you can select one that matches the current light source. Full Screen Full screen on and off. Options Overall settings to the Camera program.
54 5. To stop, press the navigation stick or tap Stop. Or, the recording will automatically stop when the length reaches the pre-defined maximum value (30 seconds by default). 6. The video clip is saved to the predefined storage location. To view the video clip, tap Thumbnails. Camera Controls, Options, and Settings While taking pictures or recording video clips, you can tap Menu to use a function that meets your specific need. For one time overall settings to the Camera program, you need to access two different places for different settings:  While in the Camera program, tap Menu  Options. Make the necessary changes. Tap ok when finished. The changes take effect immediately.  Tap  Settings  System  Camera Settings. Make the necessary changes. Tap ok when finished. The changes take effect only when you next start the Camera program.
55 5.8 Additional Programs In addition to Microsoft software, your Pocket PC manufacturer may provide additional programs to enhance your Pocket PC or facilitate your operation. E-Compass The E-Compass program shows directions of movement including heading, pitch angle, roll angle, and altitude. Reading and Calibrating the Compass To run the program, tap  E-Compass. Each time you start the program, you‘ll be requested to calibrate the compass. Hold the device in your palm and swing it in the way as shown in the small popup window on the screen. Do this several times until the popup window disappears. To exit the program, tap Exit at the bottom left of the screen. Needle on the compass dial
56 NOTE: Follow these guidelines when using the compass.  Keep the device away from objects that generate magnetic fields, such as cars, large belt buckles, computers, cell phones, etc.  If you must use the compass inside a car, the device should be at least 20 cm (7.87 inches) away from metal objects such as car doors, dashboard, air vents, etc.  Avoid playing the MP3 music with the internal speaker or connecting the AC adapter. This will cause the magnetic interference to the compass.  Regularly set the reference altitude for an accurate output. (See the next section.) Compass Settings The value of altitude is adjusted according to the change in the ambient pressure. It is important that you regularly set the reference altitude because the compass needs an appropriate starting point (altitude versus ambient pressure) for future adjustments. To configure the compass, tap Setting  Setting. When finished, tap OK to save the changes and go back to the Compass screen. Setting Items Descriptions Altimeter Set the reference altitude for the compass. You can either set a specific height (zero by default) or use GPS positioning as the reference (GPS positioning will be initiated after you tap OK). Rotation Type Set to Needle for a pivoting needle on a fixed dial or Wheel for a fixed needle on a rotating dial.
57 Tap OK to save the changes and go back to the Compass screen. TacLink The TacLink program receives GPS satellite signals to calculate the location of your device. You can also record a NMEA log file for the use of other applications. Running TacLink To run the program, tap  TacLink. A message appears if positioning is not completed in 10 minutes. To exit the program, tap Exit at the bottom left of the screen. NMEA Log To start logging, tap Setting  Log  Start. To stop, tap Setting  Log  Stop. For each logging section, new data is added to the end of the existing data in the same file. By default, the log file is named ―GeTACGPSLog‖ and saved to ―My Documents‖ folder on your device. To specify a different name and location for file, tap Setting  Log  File. Shows the overhead satellite positions. Shows the signal strength of the satellites. Shows the result of GPS positioning. A minimum of 4 GPS satellite signals is needed to calculate your GPS position. A red X indicates logging is not activated. No X indicates logging is activated. This icon appears only if SBAS is enabled. (See the next section for information.)
58 SBAS Settings SBAS (WAAS, MSAS, ENGOS) provides additional accuracy and reliability for the GPS devices. Ground stations are necessary to achieve the purpose. The SBAS feature works where such stations exist. To enable the feature, tap  Settings  System  GPS  Advanced. Tap the checkbox to enable or disable the SBAS function. A check () indicates enabled. Tap ok when finished. If you change the setting while a GPS program (such as TacLink) is running, the change takes effect only after you exit the GPS program and then start it again. Tap the checkbox to enable or disable the function. A check () indicates enabled.
59 6 Getting Connected To take full advantage of your Pocket PC, you will want to get connected. This chapter tells you how you can get your Pocket PC connected through a variety of ways. 6.1 Wireless Network Connection Your Pocket PC has a built-in wireless network module. As long as you are in a wireless LAN environment, you can connect to the network without physical cables. Turning On and Off the Wi-Fi Radio By default, the Wi-Fi radio is turned off. To turn on the Wi-Fi radio, follow this procedure: 1. Tap the Wi-Fi icon on the Today screen to access Wireless Manager.
60 2. Tap the Wi-Fi box to change the Wi-Fi radio status from Off to Available. The Wi-Fi radio status on the Today screen indicates Available. To turn off the Wi-Fi radio, follow the above procedure, but tap the Wi-Fi box to change the Wi-Fi radio status from Available to Off. The Wi-Fi radio status on the Today screen indicates Off. Connecting to a Wireless Network 1. Turn on the Wi-Fi radio. (See ―Turning On and Off the Wi-Fi Radio‖ previously in this chapter.) 2. Tap Menu  Wi-Fi Settings to open the Wireless Networks Configuration screen. By default, your Pocket PC will automatically detect the available wireless networks. 3. If more than one network is detected, the screen will display a network list. Tap the desired network and follow the procedure to configure the wireless network. 4. Tap Finish to end the configuration, and tap the Connect soft key to connect to the Internet or the private network. 5. If the selected network requires a network key, enter the key and tap the Connect soft key. NOTE: You can tap the network any time to open the Wireless Network Configuration screen and change the network settings. Starting and Ending the Wireless Network Connection After you connect to the wireless network, use the desired program when you are within the range of the wireless network. For example, switch to Internet Explorer Mobile and browse to a web page. Your Pocket PC will automatically connect, and the icon will appear on the navigation bar. To end the connection, tap the icon on the Navigation Bar of the Today screen  Wireless Manager  Wi-Fi. NOTE: When you are not using the wireless network any more, complete the actions for ending the connection as described above. Leaving the wireless network module active will consume more power.
61 6.2 Bluetooth Feature Your Pocket PC incorporates the Bluetooth capability. Bluetooth technology is a short-range wireless communications technology. Devices with Bluetooth capabilities can exchange information over a distance of about 10 meters (30 feet) without requiring a physical connection. You can use Bluetooth technology as follows:  Beam information, such as files, appointments, tasks, and contact cards, between devices that have Bluetooth capabilities.  Create a connection between your Pocket PC and a Bluetooth phone to use the phone as a modem.  Use a Bluetooth service. Once you connect to another device or computer using Bluetooth technology, you can locate and use any of the services available on that device. Turning On and Off the Bluetooth Radio By default, Bluetooth is turned off. To turn on Bluetooth, follow this procedure: 1. Tap on the Today screen to access Wireless Manager. 2. Tap the Bluetooth box to change the Bluetooth radio status from Off to On.
62 For other devices with Bluetooth capabilities to detect your Pocket PC and attempt to beam information to it, establish a partnership, or use a Bluetooth service, tap Menu  Bluetooth Settings  Mode  Make this device visible to other devices. The Bluetooth radio status indicates Visable. The Bluetooth radio status on the Today screen indicates On. To turn off the Bluetooth radio, follow the above procedure, but tap the Bluetooth box to change the Bluetooth radio status from On or Visable to Off. The Bluetooth radio status on the Today screen indicates Off. NOTE:  By default, the Bluetooth radio is turned off. If you turn it on, and then turn off your Pocket PC, the Bluetooth radio also turns off. When you turn on your Pocket PC again, the Bluetooth radio turns on automatically.  When you have finished using the Bluetooth radio, complete the actions for turning it off. Leaving the Bluetooth capability active will consume more power. Transferring Files via Bluetooth Technology Sending Files via Bluetooth Technology 1. Turn on the Bluetooth radio. (See ―Turning On and Off the Bluetooth Radio‖ previously in this chapter.) 2. Make sure that your Pocket PC and the device that is receiving the information are within close range, and that device is discoverable. 3. From the program, tap and hold the item you want to beam, such as an appointment in Calendar, a task in Tasks, a contact card in Contacts, or a file in File Explorer. 4. Tap Beam [type of item] on the shortcut menu. 5. Your Pocket PC searches for other devices with Bluetooth capabilities within close range, and displays them in the list. Tap the device to which you want to send the item. Receiving Files via Bluetooth Technology 1. Tap  Settings  Connections  Beam. Make sure that Receive all incoming beams is selected.
63 2. Make sure that Make this device visible to other devices in Bluetooth settings is selected. (See ―Turning On and Off the Bluetooth Radio‖ previously in this chapter.) 3. Make sure that your Pocket PC and the device that is beaming the information are within close range, and that device is discoverable. 4. When prompted to receive an incoming beam, tap Yes to receive the beamed information. Bluetooth Partnership A partnership is a relationship that you create between your Pocket PC and another device with Bluetooth capabilities to help exchange information in a secure manner. Creating a partnership involves entering the same Bluetooth passkey on both devices. Once a partnership is created, the devices need only have the Bluetooth radio turned on to exchange information; they do not need to be discoverable. Creating a Bluetooth Partnership 1. Make sure that the two devices are turned on, discoverable, and within close range. (See ―Turning On and Off the Bluetooth Radio‖ previously in this chapter.) 2. Tap on the Today screen to access Wireless Manager. 3. Tap Menu  Bluetooth Settings  Devices  Add new device. 4. Your Pocket PC searches for other devices with Bluetooth capabilities, and displays them in the list. 5. Tap the name of the other device, and tap Next. 6. In Passcode, enter an alphanumeric passkey between 1 and 16 characters, and tap Next. 7. Enter the same passkey on the other device. 8. Tap Done.
64 7 Troubleshooting and Maintenance This chapter gives solutions to common Pocket PC problems you may encounter. It also provides guidelines on taking care of your Pocket PC. NOTE: If you encounter a problem you cannot solve, contact your dealer for assistance. 7.1 Resetting Your Pocket PC CAUTION: Resetting will cause unsaved data to be lost. Resetting your Pocket PC allows you to restart the operating system, but you will lose any unsaved data. Occasionally, you may need to reset your Pocket PC; for example, you should reset your Pocket PC when it stops responding. In other words, it appears to be ―frozen‖ or ―locked up.‖ Use the stylus to press the reset button on your Pocket PC
65 7.2 Restoring the Factory Default State In some cases, you may need to restore your Pocket PC to the factory default state by clearing the memory (RAM) from your Pocket PC. For example, you should clear the memory:  When your Pocket PC does not respond after being reset.  When you forget your password. Clearing the memory means all data you have entered in RAM, including all files, system settings and additional programs you have installed, will be erased. 1. Press and hold the upper right button ( ) of your Pocket PC. 2. Slide the ON/OFF switch off and then slide it on again. 3. Release the upper right button ( ) of your Pocket PC after ―Clean boot now‖ appears on screen.
66 7.3 Troubleshooting Power Problems Power does not turn on when using battery power  The remaining battery power may be too low to run your Pocket PC. Connect the AC charger to your Pocket PC and to external AC power. Then, turn on your Pocket PC. Battery runs out of power quickly  You might be using your Pocket PC in ways that drain power quickly. (See ―Power-Saving Tips‖ in Section 3.1 for more information.) Memory Problems If a warning message of not enough memory appears due to the memory allocation problem, try the following to free memory on your Pocket PC. CAUTION: Be discreet when you delete files. Deleting files of which the function is unknown can cause programs or features to malfunction. It is appropriate to make a backup before deleting files.  Delete files you no longer need. Tap  File Explorer. Tap and hold the file you wish to delete and then tap Delete on the shortcut menu. To find your largest files, tap  Search Phone. In the Type list, tap Larger than 64KB  Search.  Remove programs you no longer need. Tap  Settings  System  Remove Programs. Tap the program you want to remove and then tap Remove.  In Internet Explorer options, delete all files and clear history.
67  Stop programs you are not currently using. In most cases, programs automatically stop to free needed memory. However, in some situations, such as when confirmation dialog boxes are waiting for a user response, the program may not be able to automatically stop. To check the state of your active programs, tap  Settings  System  Task Manager. Tap the program you want to view and then tap Refresh. Close any open windows or messages and return the program to list view. If this does not work, you can stop the program manually. First, make sure that your work is saved by closing open items and returning the program to list view. Then, stop the program by tapping End Task.  Reset your Pocket PC as described in Section 7.1. If you have a storage card, move data to the storage card as described next.  Tap  File Explorer. Use the File Explorer to move the file to the correct location of the storage card.  Move email attachments. In E-mail, tap Menu  Tools  Options  Storage and select When available, use this storage card to store attachments. All attachments are moved to the storage card and new attachments are automatically stored on the storage card.  Set programs such as Notes, Word Mobile and Excel Mobile to automatically save new items on the storage card. In the program, tap Menu  Options. In Save to, select Storage Card. Screen Problems Screen is off If the screen does not respond even after you press the power button, try the following in order until the problem is solved:  Connect the AC charger to your Pocket PC and to external AC power.  Reset your Pocket PC as described in Section 7.1.
68 Screen responds slowly  Make sure that your Pocket PC is not running out of battery power or running many active programs. If the problem still exists, reset your Pocket PC as described in Section 7.1. Screen freezes  Reset your Pocket PC as described in Section 7.1. Inaccurate response to stylus taps  Realign the touch screen. Tap  Settings  System  Screen  Align Screen. Connection Problems ActiveSync Connection Problems  ActiveSync connection problems may occur in some specific cases. They are likely caused by interoperability with desktop firewall applications or applications that manage network traffic. For troubleshooting information, visit the Microsoft web site.  Make sure that you have installed the correct version of ActiveSync on your desktop computer. Install the version ActiveSync included with your Pocket PC.  Make sure that your Pocket PC and your desktop computer are both turned on before establishing the connection.  Make sure that the cable is securely plugged into the USB port on your desktop computer. Connect the USB cable directly to your desktop computer—do not run the cable through a USB hub.  Make sure that the USB connection is enabled in ActiveSync on your desktop computer. If the USB connection is already enabled, disable the USB connection, close the Connection Settings window and then reopen and re-enable the USB connection.  Reset your Pocket PC before connecting the cable. (See Section 7.1.) Always disconnect your Pocket PC before you restart your desktop computer.
69  Connect only one Pocket PC or personal digital assistant to your desktop computer at a time. Network Connection Problems  Make sure that you have added necessary server information.  If Network Connection is not listed as a connection method in the ActiveSync dialog box when starting synchronization, wait a few minutes and try again. Also, if synchronization does not start right away, the network is probably busy, and it may take a minute for your Pocket PC to connect to the network.  Verify with your network administrator that your user name and password are correct.  Verify with your network administrator that the network you are trying to connect to is available, to try to connect to it from another computer.  You may need to change the device name if you are trying to connect to a network and cannot because another device with the same name is already connected. To change the device name, tap  Settings  System  About  Device ID. 7.4 Taking Care of Your Pocket PC Taking good care of your Pocket PC will ensure trouble-free operation and reduce the risk of damage to your Pocket PC. General Guidelines  Keep your Pocket PC away from excessive moisture and extreme temperatures.  Avoid exposing your Pocket PC to direct sunlight or strong ultraviolet light for extended periods of time.  Do not place anything on top of your Pocket PC or drop objects on top of your Pocket PC.  Do not drop your Pocket PC or subject it to severe shock.  Store your Pocket PC in a protective cover when not in use.
70  Do not subject your Pocket PC to sudden and severe temperature changes. This could cause moisture condensation inside the unit that could damage your Pocket PC. In the event of moisture condensation, allow you Pocket PC to dry out completely.  Take care not to sit on your Pocket PC when it is located in the back pocket of trousers, etc.  The screen surface is easily scratched. Use only the stylus to tap on the screen. Avoid touching it with your fingers, pens, pencils or any other sharp objects.  Never clean your Pocket PC with its power on. Use a soft, lint-free cloth to wipe the screen and the exterior of your device.  Do not use paper towels to clean the screen.  Never attempt to disassemble, repair or make any modifications to your Pocket PC. Disassembly, modification or any attempt at repair could cause damage to your Pocket PC and even bodily injury or property damage.  Do not store or carry flammable liquids, gases or explosive materials in the same compartment as your Pocket PC, its parts or accessories. Travel Guidelines  Before traveling with your Pocket PC, back up your data. As an added precaution, bring along a backup copy.  Turn off your Pocket PC and disconnect all external devices.  Make sure that the battery is fully charged.  Take the AC charger with you. Use the AC charger as the power source and as a battery-recharger.  Keep your Pocket PC inside its protective cover when you are not using it on the road.  Hand-carry your Pocket PC in a protective cover. Do not check it in as luggage.  If you plan to travel abroad with your Pocket PC, consult your dealer for the appropriate AC charger for use in your country of destination.
71  If you plan to make modem connections abroad, make sure that you have the correct modem and cable for your country of destination.
72 8 Regulatory Information NOTE: Marking labels located on the exterior of your device indicate the regulations that your model complies with. Please check the marking labels on your device and refer to the corresponding statements in this chapter. Some notices apply to specific models only. 8.1 Regulations Statements European Notice Products with the CE marking comply with Radio & Telecommunication Terminal Equipment Directive (R&TTE) (1999/5/EEC), the Electromagnetic Compatibility Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) – as amended by Directive 93/68/ECC – issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Standards: EN301489-1: Electronic compatibility and Radio spectrum Matters (ERM), ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements EN301489-17: Electronic compatibility and Radio spectrum Matters (ERM), ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment EN55022: Radio disturbance characteristics EN55024: Immunity characteristics EN6100-3-2: Limits for harmonic current emissions EN6100-3-3: Limitation of voltage fluctuation and flicker in low-voltage supply system EN60950 / IEC 60950: Product Safety
73 The manufacturer cannot be held responsible for modifications made by the User and the consequences thereof, which may alter the conformity of the product with the CE Marking. FCC CAUTION This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user‗s authority to operate the equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
74 8.2 Safety Precautions  Prolonged listening of music in maximum volume can damage the ears.  The use of headphones other than those recommended/supplied can cause hearing impairment due to excessive sound pressure. About Charging  Use only the AC adapter (PSC11R-050) supplied with your Pocket PC. Use of another type of AC adapter will result in malfunction and/or danger.  Use only the car charger supplied by the manufacturer. Use of another type of car charger will result in malfunction and/or danger.  This product is intended to be supplied by a LISTED Power Unit marked with ―LPS,‖ ―Limited Power Source,‖ and output rated + 5 V dc / 2.0 A.  Use a specified cradle approved by the manufacturer.  Use a specified battery in the equipment. About the Charger  Do not use the charger in a high moisture environment. Never touch the charger when your hands or feet are wet.  Allow adequate ventilation around the charger when using it to operate the device or charge the battery. Do not cover the charger with paper or other objects that will reduce cooling. Do not use the charger while it is inside a carrying case.  Connect the charger to a proper power source. The voltage and grounding requirements are found on the product case and/or packaging.  Do not use the charger if the cord becomes damaged.  Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture.
75 About the Battery  Use a specified charger approved by the manufacturer.  Do not mutilate, puncture, or dispose of battery in fire. The battery can burst or explode, releasing hazardous chemicals.  Important instructions  Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.  Replace only with the same or equivalent type recommended by the manufacturer.  The battery must be recycled or disposed of properly.  Use the battery only in the specified equipment. About the Radio Frequency Exposure This product is a low-power radio transmitter and receiver. When it is turned on, it receives and also sends out radio frequency (RF) signals. Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio frequency energy absorbed by the body. The highest SAR value for this product when tested for use is 0.066W/kg, lower than the limit of 1.6 W/kg. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and the positions the handset a minimum of 1.5 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.

Navigation menu