Giant Electronics MHBCJ Two Way Radio with GMRS, FRS, Weather Band User Manual Layout 1

Giant Electronics Ltd Two Way Radio with GMRS, FRS, Weather Band Layout 1

Manual

MH SeriesKEM-PK14190-66Safety and General InformationImportant Information on Safe and Efficient OperationRead This Information Before Using Your Radio.The information provided in this document supersedes the generalsafety information in user guides published prior to December 1, 2002.Transmit and Receive ProcedureYour two-way radio contains a transmitter and a receiver. To controlyour exposure and ensure compliance with the general population/uncontrolled environment exposure limits, always adhere to thefollowing procedure:• Transmit no more than 50% of the time.• To receive calls, release the PTT button.• To transmit (talk), press the Push to Talk (PTT) button.Transmitting 50% of the time, or less, is important because the radiogenerates measurable RF energy exposure only when transmitting(in terms of measuring standards compliance).Exposure to Radio Frequency EnergyYour Motorola two-way radio complies with the following RF energyexposure standards and guidelines:• United States Federal Communications Commission, Code ofFederal Regulations; 47CFR part 2 sub-part J.• American National Standards Institute (ANSI)/Institute ofElectrical and Electronic Engineers (IEEE) C95. 1-1992.• Institute of Electrical and Electronics Engineers (IEEE) C95.1-1999 Edition.• International Commission on Non-Ionizing Radiation Protection(ICNIRP) 1998.• Ministry of Health (Canada) Safety Code 6. Limits of HumanExposure to Radiofrequency Electromagnetic Fields in theFrequency Range from 3 KHz to 300 GHz, 1999.• Australian Communications Authority Radiocommunications(Electromagnetic Radiation—Human Exposure) Standard, 2003.• ANATEL ANNEX to Resolution No. 303 of July 2, 2002 “Regulation oflimitation of exposure to electrical, magnetic and electromagneticfields in the radio frequency range between 9 KHz and 300GHz”.To ensure optimal radio performance and make sure humanexposure to radio frequency electromagnetic energy is within theguidelines set forth in the above standards, always adhere to thefollowing procedures.Portable Radio Operation and EME ExposureAntenna CareUse only the supplied or an approved replacement antenna.Unauthorized antennas, modifications, or attachments coulddamage the radio and may violate FCC regulations.Do NOT hold the antenna when the radio is “IN USE.” Holding theantenna affects its effective range.Body-Worn OperationTo maintain compliances with FCC/Health Canada RF exposureguidelines if you wear a radio on your body when transmittingalways place the radio in a Motorola-supplied or approved clipholder, holster, case or body harness for this product. Use of non-Motorola-approved accessories may exceed FCC/Health Canada RFexposure guidelines.If you do not use one of the Motorola-supplied or approved body-worn accessories and are not using the radio held in the normaluse position, ensure the radio and its antenna are at least 1 inch(2.5 cm) from your body when transmitting.Data OperationIf applicable, when using any data feature of the radio with orwithout an accessory cable, position the radio and its antenna atleast one inch (2.5 cm) from the body.Approved AccessoriesFor a list of approved Motorola accessories, visit our Web site atwww.motorola.com.Electromagnetic Interference/CompatibilityNote: Nearly every electronic device is susceptible toelectromagnetic interference (EMI) if inadequately shielded,designed or otherwise configured for electromagnetic compatibility.This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:1. This device may not cause harmful interference; and2. This device must accept any interference received, includinginterference that may cause undesired operation.IC CanadaThe term "IC:" before the equipment certification number onlysignifies that the Industry Canada technical specifications were met.FacilitiesTo avoid electromagnetic interference and/or compatibility conflicts,turn off your radio in any facility where posted notices instruct youto do so. Hospitals or health care facilities may be using equipmentthat is sensitive to external RF energy.AircraftWhen instructed to do so, turn off your radio when onboard anaircraft. Any use of a radio must be in accordance with applicableregulations per airline crew instructions.Medical Devices – PacemakersThe Advanced Medical Technology Association recommends thata minimum separation of 6 inches (15 cm) be maintained between ahandheld wireless radio and a pacemaker. These recommendationsare consistent with the independent research by andrecommendations of the U.S. Food and Drug Administration.People with pacemakers should:• ALWAYS keep the radio more than 6 inches (15 cm) from theirpacemaker when the radio is turned ON.• Not carry the radio in the breast pocket.• Use the ear opposite the pacemaker to minimize the potentialfor interference.• Turn the radio OFF immediately if there is any reason to suspectthat interference is taking place.Medical Devices – Hearing AidsSome digital wireless radios may interfere with some hearing aids.In the event of such interference, you may want to consult yourhearing aid manufacturer to discuss alternatives.Medical Devices – OtherIf you use any other personal medical device, consult themanufacturer of your device to determine if it is adequatelyshielded from RF energy. Your physician may be able to assist youin obtaining this information.Safety and General Use While DrivingCheck the laws and regulations regarding the use of radios in thearea where you drive, and always obey them. If you do use yourradio while driving, please:• Give full attention to driving and to the road.• Use hands-free operation, if available.• Pull off the road and park before making or answering a call ifdriving conditions so require.The use of a two-way radio while engaged in activities requiringconcentration may cause distraction or otherwise impair yourability to safely participate in such activities. Always use technologysafely.Do not place a portable radio in the area over an air bag or in theair bag deployment area. Air bags inflate with great force. If aportable radio is placed in the air bag deployment area and the airbag inflates, the radio may be propelled with great force and causeserious injury to occupants of the vehicle.Potentially Explosive AtmospheresTurn off your radio prior to entering any area with a potentiallyexplosive atmosphere. Only radio types that are especially qualifiedshould be used in such areas as “Intrinsically Safe.” Do not remove,install or charge batteries in such areas. Sparks in a potentiallyexplosive atmosphere can cause an explosion or fire resulting inbodily injury or even death.For More InformationFor further information, you may call Motorola at 1-800-638-5119(U.S. and Canada), or e-mail us at giantintl@callcenter.com or visitus on the Internet at www.motorola.com.Note: The areas with potentially explosive atmospheres referred toabove include fueling areas such as below decks on boats, fuel orchemical transfer or storage facilities, areas where the air containschemicals or particles (such as grain, dust or metal powders) andany other area where you would normally be advised to turn off yourvehicle engine. Areas with potentially explosive atmospheres areoften—but not always—posted.Blasting Caps and AreasTo avoid possible interference with blasting operations, turn off yourradio when you are near electrical blasting caps, in a blasting area,or in areas posted “Turn off two-way radios.” Obey all signs andinstructions.Operational CautionsAntennasDo not use any portable radio that has a damaged antenna. If adamaged antenna comes into contact with your skin, a minor burncan result.BatteriesAll batteries can cause property damage and/or bodily injury such asburns if a conductive material—like jewelry, keys or beaded chains—touch exposed terminals. The conductive material may complete anelectrical circuit (short circuit) and become quite hot. Exercise care inhandling any charged battery, particularly when placing it inside apocket, purse or other container with metal objects.Exercise care when removing NiMH or AAA batteries. Do not usesharp or conductive tools to remove either of these batteries.Battery Charger Safety Instructions:Save these Instructions1. Do not expose the charger to rain or snow.2. Do not operate or disassemble the charger if it has received asharp blow, or has been dropped or damaged in any way.3. Never alter the AC cord or plug provided with the unit. If theplug will not fit the outlet, have the proper outlet installed by aqualified electrician. An improper condition can result in a riskof electric shock.4. To reduce the risk of damage to the cord or plug, pull the plugrather than the cord when disconnecting the charger from theAC receptacle.5. To reduce the risk of electric shock, unplug the charger from theoutlet before attempting any maintenance or cleaning.6. Use of an attachment not recommended or sold by Motorolamay result in a risk of fire, electric shock or personal injury.7. Make sure the cord is located so it will not be stepped on,tripped over or subjected to damage or stress.8. An extension cord should not be used unless absolutelynecessary. Use of an improper extension cord could result in arisk of a fire and/or electric shock. If an extension cord must beused, make sure that:• The pins on the plug of the extension cord are the samenumber, size and shape as those on the plug of the charger.• The extension cord is properly wired and in good electricalcondition.• The extension cord size is 18 AWG for lengths up to 100 feet,and 16 AWG for lengths up to 150 feet.9. The supply cord of the AC adaptor cannot be replaced. If thecord is damaged, call customer service at 1-800-638-5119 (U.S.and Canada) or e-mail us at giantintl@callcenter.com.FCC Licensing InformationYour Motorola radio operates on General Mobile Radio Service(GMRS) frequencies and is subject to the Rules and Regulations ofthe Federal Communications Commission (FCC). The FCC requiresthat all operators using GMRS frequencies obtain a radio licensebefore operating their equipment. To obtain the FCC forms, pleaserequest Form 605 and 159 , which includes all of the forms andinstructions you will need.If you wish to have the document faxed or mailed, or if you havequestions, please use the following contact information:You may also visit the FCC’s Web site at www.fcc.gov.Changes or modifications not expressly approved by Motorola mayvoid the user’s authority granted by the FCC to operate this radioand should not be made. To comply with FCC requirements,transmitter adjustments should be made only by or under thesupervision of a person certified as technically qualified to performtransmitter maintenance and repairs in the private land mobile andfixed services as certified by an organization representative of theuser of those services. Replacement of any transmitter component(crystal, semiconductor, etc.) not authorized by the FCC equipmentauthorization for this radio could violate FCC rules.®3. Gently remove each battery by easing each battery out individually.4. Reposition the battery cover and press down to secure.Notes• Exercise care when removing NiMH or AAA batteries. Do notuse sharp or conductive tools to remove either of these batteries.• Remove the batteries before storing your radio for extendedperiods of time. Batteries corrode over time and may causepermanent damage to your radio.Using the Battery Charger (Optional Accessory)The battery charger provides drop-in charging convenience forNiMH batteries and can be placed on any flat surface, such as adesk or workbench. Charge the NiMH battery overnight (at least16 hours) before using it for the first time. After the initial charge,an empty battery is fully charged within 14 hours.1. Follow the steps above to install a NiMH Battery Pack.2. Plug the AC power supply cord into the jack on the desk stand.3. Plug the AC power supply into a standard wall outlet.4. With a radio facing forward, slide it into one of the chargingpockets.Using the mini-USB Charging ConnectorThe mini-USB charging connector is a handy port that allows you toconveniently charge your NiMH battery pack. This is an alternativeto charging your NiMH battery pack in the Battery Charger deskstand using the AC wall adaptor and especially useful when usedwhile traveling.Available mini-USB charging options: (Optional Accessories)1. Wall travel charger2. Vehicle charger3. Mini-USB computer cableIf using a computer, the computer must be turned on.This and other accessories (sold separately) are available foryour radio. For more information, visit our Web site atwww.motorola.com or shop.giantintl.com.1. Plug your mini-USB cable or charger into a power source as isappropriate for your accessory.2. Plug the cable into the mini-USB port on the bottom of your radio.3. An empty battery will be fully charged in 14 hours.4. The LED indicator light on the radio will glow to indicate that thebattery is charging.Notes• The light will remain red after the NiMH battery pack is fullycharged.• When moving between hot and cold temperatures, do notcharge the NiMH battery pack until the battery temperatureacclimates (usually about 20 minutes).• For optimal battery life, remove the radio from the charger within16 hours. Do not store the radio while connected to the charger.• If the radio is kept on while charging, the charging time will beextended.• Even though the charger is connected, you may not be able totransmit a message if the battery is completely empty .Allow time for the battery to charge to 1 bar beforeattempting to transmit a message.Attaching and Removing the Belt Clip1. Attach belt clip to pocket or belt strap.2. Align the belt clip post with the hole in the back of the radio.3. Gently push until the clip clicks in place.To Remove1. Push down on the release tab at the top of the belt clip torelease the catch.2. Pull the belt clip away from the back of the radio.Turning your Radio On and OffTurn clockwise to turn the radio on and counterclockwise toturn the radio off.1. In the ON position, the radio chirps and briefly shows all featureicons available on the radio.2. The display screen then shows the current channel, code andall features that are enabled.Setting the VolumePress and hold for three seconds while rotating until youreach a comfortable listening level.1. Rotate clockwise to increase the volume.2. Rotate counterclockwise to decrease the volume.Do not hold the radio close to your ear. If the volume is set to anuncomfortable level, it could hurt your ear.Talking and ListeningTo communicate, all radios in your group must be set to the samechannel and Interference Eliminator Code.1. To talk, press and hold .2. When you are finished talking, release .For maximum clarity, hold the radio two to three inches away fromyour mouth and speak directly into the microphone. Do not coverthe microphone while talking.Talk RangeYour radio is designed to maximize performance and improvetransmission range. Do not use the radios closer than five feet apart.Monitor ButtonPressing and holding for three seconds allows you to listen tothe volume level of the radio when you are not receiving. This allowsyou to adjust the volume, if necessary. You can also press tocheck for activity on the current channel before you talk.Push to Talk Timeout TimerTo prevent accidental transmissions and save battery life, the radioemits a continuous warning tone and stops transmitting if youpress for 60 continuous seconds.Menu OptionsSelecting the ChannelYour radio has 22 channels. The channel is the frequency the radiouses to transmit. Channels 8-14 are FRS 0.5 watt only and all otherchannels are GMRS. (See the “Channels and Frequencies” table onoverleaf for details.)1. With the radio on, press . When the radio is on a 0.5 wattchannel, displays. When the radio is on a 1 watt channel,displays. The current channel flashes.2. Press or and select an unused or quiet channel.3. Press to save the channel setting or to continue set up.Selecting the Interference Eliminator CodeInterference Eliminator Codes help minimize interference byblocking transmissions from unknown sources. Your radio has 121Interference Eliminator Codes. Codes 1 – 38 are the standard analogcodes that appear on other FRS/GMRS radios. Codes 39 – 121 areadditional digital codes added for superior interference protection.0 is the off position, no analog or digital codes are enabled.To set the code for a channel:1. Press until the code starts to flash.2. Press or to select the code.3. Press to save the code setting or to continue set up.You can set a different code for each channel using this procedure.An extended press of or allows you to scroll throughthe Interference Code rapidly so you can quickly reach the codeyou want.Note: You must set the Interference Eliminator Code to 0 on a radiothat uses Interference Eliminator Codes to communicate with radiosthat do not have Interference Eliminator Codes. Select 0 for “notone, no code” and OFF will flash on your radio’s display.Setting and Transmitting Call TonesYour radio can transmit different call tones to other radios in yourgroup so you can alert them that you want to talk. You have 10 calltones from which to choose.To set a call tone:1. With the radio on, press three times until the currentcall tone setting (0 - 10) flashes and appears.2. Press or to change and hear the call tone.3. Press to set the new call tone or to continue set up.To transmit your call tone to other radios set to the same channeland Interference Eliminator Code as your radio, press .Note: Setting the call to 0 disables the call tone feature.Hands-Free Use Without Accessories ( )You can use the iVOX feature to transmit hands-free without the needfor any headset accessories. Once iVOX is turned on, the radio detectsyour voice and transmits when you speak into the internal microphone.1. Press until appears on the display. The currentsetting On/Off will flash.2. Press or to select On or Off.3. Press to set or to continue set up.Hands-Free Use With Accessories ( )You can transmit hands-free more reliably with the use of optionalheadset accessories. Once VOX is turned on, the radio detects yourvoice and transmits when you speak.Many accessories (sold separately) are available for your radio.For more information, visit our Web site at www.motorola.com orshop.giantintl.com.1. Turn the radio off and plug the VOX accessory into theaccessory port.2. Turn the radio on. VOX shows on the display.3. Adjust the volume appropriately by rotating . Lower thevolume before placing the accessory on your head or in your ear.4. To turn off, simply remove accessory.Display Screen GuideContinued on backMH SeriesControl ButtonsGetting StartedInstalling the BatteriesEach radio uses 1 NiMH rechargeable battery pack or 3 AAAalkaline batteries and beeps when the batteries are low.Installing NiMH Rechargeable Battery Pack (Optional Accessory)1. Turn the radio off.2. With the back of the radio facing you, lift the battery cover latchup and remove the cover.3. Remove the battery pack from the clear plastic bag. (Do notdisassemble or unwrap the battery pack.)4. Insert the NiMH battery pack with the diagram facing you.5. Reposition the battery cover and press down to secure.Installing the Three AAA Alkaline Batteries1. Turn the radio off.2. With the back of the radio facing you, lift the battery cover latchup and remove the cover.3. Insert the three AAA alkaline batteries with + and - polarity asshown inside.4. Reposition the battery cover and press down to secure.Radio Battery MeterThe radio battery icon shows the radio battery charge level, fromfull to empty . When the radio has one segment left, theradio chirps periodically or after releasing (Low Battery Alert).Removing the NiMH Battery Pack (Optional Accessory)1. Turn the radio off.2. With the back of the radio facing you, lift the battery latch up torelease the battery cover and remove the cover.3. Gently remove the NiMH battery.4. Reposition the battery cover and press down to secure.Removing the Three AAA Batteries1. Turn the radio off.2. With the back of the radio facing you, lift the battery latch up torelease the battery cover and remove the cover.For a fax:Contact theFax-0n-DemandsystemFor mail service:Call the FCCForms HotlineIf you havequestions aboutthe FCC License:Call the FCC1-202-418-0177 1-800-418-FORM(3676)1-888-CALL-FCC(225-5322)Two-Way RadioUser’s GuideNumbersfor Channel,Call ToneNumbersfor Codes-Battery Meter-Channel PowerIndicator (seeMenu Options)-Lock-Talk ConfirmationTone (Roger Beep)-Noise Filtering-On/Off for eachfeature-Scan-Call Tone,Keypad Tone-Weather Alert-Hands-Free UseWithoutAccessories-Hands-Free UseWith AccessoriesPush to TalkCall ToneSpeakerMenu/LockAccessory JackScan/MonitorScroll/WeatherMicrophoneVolumeMini-USBCharging Port
Note: There is a short delay between the time you start talkingand when the radio transmits. There is a short delay before thetransmission is completed.Setting the Sensitivity Level When in or ModeAdjusting the radio’s sensitivity level helps minimize the possibilityof unintended noises triggering a transmission and helps the radiopick up soft voices.1. Press until VOX/iVOX and the level setting (1-3) appear onthe display.2. Press or to select the sensitivity level.3. Press to set or to continue set up.3 = High Sensitivity for quiet environments2 = Medium Sensitivity for most environments1 = Low Sensitivity for noisy environmentsNote: When you connect a headset, the radio is automatically set tothe last chosen sensitivity level.QTNoise FilteringThe QTnoise-filtering feature helps to ensure uninterruptedcommunication with other Motorola radios that have this feature.This feature also filters out unwanted transmissions from otherradios. This is useful in places where there is heavy radio traffic,such as amusement parks or ski resorts.Note: QTnoise filtering is not available when the radio is scanning.To turn QTnoise filtering on or off:1. Press until displays. The current setting On/Off will flash.2. Press or to turn noise filtering On or Off.3. Press to confirm your selection or to continue set up.To transmit to a radio that has QTnoise filtering turned on:1. Select the same channel and Interference Eliminator Code asthe other radio.2. Press to send a call tone. This allows your voice to passthrough the QTnoise filter on the receiving radio.3. Press and speak normally.Note: If you skip step 2, the beginning of your message may not beheard on the receiving radio. For a 30-second period, starting afterthe last transmission, all transmissions received on the selectedchannel and code will pass through the QTnoise filter.Keypad TonesYou may enable or disable the speaker key tones. You will hear thekey tone each time a button is pushed.1. Press until appears. The current setting On/Off will flash.2. Press either or to turn On or Off.3. Press to confirm or to continue set up.Note: When the key tone feature is off, the following are not disabled:• Transmit timeout alert tone• Call tone• Low battery alert tone or• The transmitted talk confirmation toneTransmitting a Talk Confirmation ToneYou can set your radio to transmit a unique tone when you finishtransmitting. It is like saying “Roger” or “Over” to let others knowyou are finished talking.1. With the radio on, press until the appears. The currentsetting On/Off flashes.2. Press or to turn On or Off.3. Press to set or to quit menu mode.Special FeaturesKeypad LockTo avoid accidentally changing your radio settings:1. Press and hold until displays.2. When in lock mode, you can turn the radio on and off, adjustthe volume, receive, transmit, send a call tone, and monitorchannels. All other functions are locked.To unlock the radio, press and hold until is no longerdisplayed.Scanning ChannelsUse scan to search the 22 channels for transmissions fromunknown parties, to find someone in your group who hasaccidentally changed channels, or to quickly find unused channelsfor your own use.There is a priority feature and 2 modes of scanning (basic andadvanced) to make your search more effective. The basic scanmode uses the channel and code combinations for each of the 22channels as you have set them (or with the default code value of 1).The “Advanced Scan” mode will scan all channels for any and allcodes, detect any code in use, and use that code value temporarilyfor that channel.Priority is given to the “home channel,” that is, the channel (andInterference Eliminator Code) your radio is set to when you start thescan. This means the initial channel (and code setting) is scannedmore often than the other 21 channels, and your radio will respondquickly to any activity occurring on the home channel as a priority.To start Scanning:1. Briefly press the key. The scan will appear in thedisplay, and the radio will begin to scroll through the channeland code combinations.2. When the radio detects channel activity matching the channeland code combination, it stops scrolling and you can hear thetransmission.3. To respond and talk to the person transmitting, press withinfive seconds after the end of the transmission.4. The radio will resume scrolling through the channels fiveseconds after the end of any received activity.5. To stop scanning, briefly press the key.To start Advanced Scanning:1. Set the Interference Eliminator Code to “zero” or OFF.2. Briefly press the key. The scan will appear in thedisplay, and the radio will begin to scroll through the channels.No Interference Eliminator Codes will filter what is heard.3. When the radio detects channel activity with ANY code (or NOcode), it stops scrolling and you can hear the transmission. AnyInterference Eliminator Code that may be in use by that partywill be detected and displayed.4. To respond and talk to the person transmitting, press withinfive seconds of the end of the transmission. The radio willtransmit using the newly detected Interference Eliminator Code.5. The radio will resume scrolling through the channels fiveseconds after the end of any received activity.6. To stop scanning, briefly press the key.Scanning Notes:1. If you press while the radio is scrolling through inactivechannels, the transmission will be on the “home channel”.Scanning will resume five seconds after the end of yourtransmission. You may press the key to stop scanningat any time.2. If the radio stops on an undesired transmission, you mayimmediately resume the scan by briefly pressing or .3. If the radio repeatedly stops on an undesired transmission,you may temporarily remove that channel from the scan list bypressing and holding or for three seconds. You mayremove more than one channel in this way.4. To restore the removed channel(s) to the scan list, turn the radiooff and then back on, or exit and re-enter the scanning mode bypressing .5. You cannot remove the home channel from the scan list.6. In Advanced Scan, the detected code will only be used forone transmission. You must note the code, exit scan, and setthat detected code on that channel to permanently use thedetected code.Weather ReceiverYour radio can tune in to broadcasts by the United States NationalOceanic and Atmospheric Administration (NOAA) Weather Radioand Environment Canada Weatheradio.You can listen to a weather channel (see “Weather Channels andFrequencies” table below) or set your radio to alert you toemergency weather broadcasts that interrupt routine broadcasts.When you listen to a weather channel, you cannot use your radioin scan mode or for two-way communications.Both NOAA and Environment Canada have transmitters locatedthroughout the United States and Canada, respectively. Thesetransmitters broadcast watches, forecasts, and other information24 hours a day.Note: NOAA weather radio stations are assigned to cover specificareas and service may be limited. Please check with your localweather office for frequency and details, or visit www.weather.gov/nwrin the US or www.msc.ec.gc.ca/msb/weatheradio in Canada to viewthe appropriate transmitter for your area.The use of the NOAA logo does not provide an endorsement orimplied endorsement by NOAA’s National Weather Service, nordoes the use of the Weatheradio logo provide an endorsement orimplied endorsement by Environment Canada.Turning Weather Channel Reception On and Off1. To turn weather reception on, press and hold for threeseconds.2. To turn off, press or turn the radio off and then back on.Setting the Weather ChannelYour radio receives weather frequencies:1. After turning weather reception on, press . The currentchannel flashes.2. Press or to select the appropriate channel with goodreception in your area.3. Press to save the weather channel setting.Setting the Weather AlertYour radio can be set to respond to NOAA Weather Radioemergency messages. A special alarm tone sounds an alertand turns on the weather receiver to give you immediate weatherand emergency information.1. After turning weather reception on, press twice. On/Offdisplays.2. Press or to select On/Off. If you activate Weather Alertand return to two-way mode, will display.3. Press to save the weather alert setting.4. Press to return to two-way mode.As with two-way radio reception, weather channel reception dependson how close you are to a transmitter and whether you are indoors oroutdoors. Because weather channels are transmitted without codes,they may contain static or noise. Weather Alert will not function whileactively transmitting or receiving in two-way mode.Weather Channels and FrequenciesChannel Frequency Description Channel Frequency Description1 462.5625 MHz GMRS/FRS 12 467.6625 MHz FRS2 462.5875 MHz GMRS/FRS 13 467.6875 MHz FRS3 462.6125 MHz GMRS/FRS 14 467.7125 MHz FRS4 462.6375 MHz GMRS/FRS 15 462.5500 MHz GMRS5 462.6625 MHz GMRS/FRS 16 462.5750 MHz GMRS6 462.6875 MHz GMRS/FRS 17 462.6000 MHz GMRS7 462.7125 MHz GMRS/FRS 18 462.6250 MHz GMRS8 467.5625 MHz FRS 19 462.6500 MHz GMRS9 467.5875 MHz FRS 20 462.6750 MHz GMRS10 467.6125 MHz FRS 21 462.7000 MHz GMRS11 467.6375 MHz FRS 22 462.7250 MHz GMRSProducts CoveredProducts and Accessories asdefined above, unless otherwiseprovided for below.1. Consumer Two-Way RadioAccessories.2. Products and Accessoriesthat are Repaired orReplaced.Length of CoverageOne (1) year from the date ofpurchase by the first consumerpurchaser of the product unlessotherwise provided for below.1. Ninety (90) days from thedate of purchase by the firstconsumer purchaser of theproduct.2. The balance of the originalwarranty or for ninety (90)days from the date returnedto the consumer, whicheveris longer.ExclusionsNormal Wear and Tear. Periodic maintenance, repair andreplacement of parts due to normal wear and tear are excludedfrom coverage.Batteries. Only batteries whose fully charged capacity falls below80% of their rated capacity and batteries that leak are covered bythis limited warranty.Abuse & Misuse. Defects or damage that result from: (a) improperoperation, storage, misuse or abuse, accident or neglect, such asphysical damage (cracks, scratches, etc.) to the surface of theproduct resulting from misuse; (b) contact with liquid, water, rain,extreme humidity or heavy perspiration, sand, dirt or the like, extremeheat, or food; (c) use of the Products or Accessories for commercialpurposes or subjecting the Product or Accessory to abnormal usageor conditions; or (d) other acts which are not the fault of Motorola orGiant International Ltd., are excluded from coverage.Use of Non-Motorola branded Products and Accessories. Defectsor damage that result from the use of Non-Motorola branded orcertified Products, Accessories, or other peripheral equipment areexcluded from coverage.Unauthorized Service or Modification. Defects or damagesresulting from service, testing, adjustment, installation,maintenance, alteration, or modification in any way by someoneother than Motorola, Giant International Ltd. or its authorizedservice centers, are excluded from coverage.Altered Products. Products or Accessories with (a) serial numbersor date tags that have been removed, altered or obliterated; (b)broken seals or that show evidence of tampering; (c) mismatchedboard serial numbers; or (d) nonconforming or non-Motorolabranded housings, or parts, are excluded from coverage.Communication Services. Defects, damages, or the failure ofProducts or Accessories due to any communication service orsignal you may subscribe to or use with the Products orAccessories is excluded from coverage.WarrantyConsumer Two-Way Radio Products and Accessories purchased inthe United States or Canada.What Does this Warranty Cover?Subject to the exclusions contained to the right, Giant InternationalLtd. warrants the Motorola branded consumer two-way radios thatoperate via Family Radio Service or General Mobile Radio Servicethat it manufactures (“Products”), the Motorola branded or certifiedaccessories sold for use with these Products that it manufactures(“Accessories”) to be free from defects in materials andworkmanship under normal consumer usage for the period(s)outlined below. This limited warranty is a consumer’s exclusiveremedy, and applies as follows to new Motorola branded Productsand Accessories manufactured by Giant International Ltd., andpurchased by consumers in the United States or Canada, which areaccompanied by this written warranty:Who is covered?This warranty extends only to the first consumer purchaser, and isnot transferable.What will GIANT INTERNATIONAL LTD. do?GIANT INTERNATIONAL LTD., at its option, will at no charge repair,replace or refund the purchase price of any Products orAccessories that does not conform to this warranty. We may usefunctionally equivalent reconditioned/ refurbished/ pre-owned ornew Products, Accessories or parts.How to Obtain Warranty Service or Other Information?To obtain service or information, please call:USA Two-Way Radios Canada Two-Way Radios1-800-638-5119 1-800-638-5119giantintl@callcenter.com giantintl@callcenter.comFor Accessories, please call the telephone number designatedabove for the product with which they are used.You will receive instructions on how to ship the Products orAccessories at your expense, to a GIANT INTERNATIONAL LTD.Authorized Repair Center. To obtain service, you must include: (a) acopy of your receipt, bill of sale or other comparable proof ofpurchase; (b) a written description of the problem; (c) the name ofyour service provider, if applicable; (d) the name and location of theinstallation facility (if applicable) and, most importantly; (e) youraddress and telephone number.What Other Limitations Are There?ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATIONTHE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESSFOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THEDURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR,REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESSLIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THECONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHERWARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALLMOTOROLA OR GIANT INTERNATIONAL LTD. BE LIABLE, WHETHERIN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGESIN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT ORACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL ORCONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUEOR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OROTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTIONWITH THE ABILITY OR INABILITY TO USE THE PRODUCTS ORACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BEDISCLAIMED BY LAW.Some states and jurisdictions do not allow the limitation orexclusion of incidental or consequential damages, or limitation onthe length of an implied warranty, so the above limitations orexclusions may not apply to you. This warranty gives you specificlegal rights, and you may also have other rights that vary from stateto state or from one jurisdiction to another.Patent and Copyright InformationManufactured, distributed or sold by Giant International Ltd., officiallicensee for this product. Motorola, the Stylized M Logo, and otherMotorola trademarks and trade dress are owned by Motorola, Inc.and are used under license from Motorola, Inc. MOTOROLA and theStylized M Logo are registered in the US Patent & Trademark Office.All other product or service names are the property of theirrespective owners. ©Motorola, Inc. 2009. All rights reserved.Please contact customer service at 1-800-638-5119 or e-mail us atgiantintl@callcenter.com for questions/comments, warranty, supportor service related to this product.MH SeriesChannels and FrequenciesWeatherChannel Frequency WeatherChannel FrequencyWX1 162.550 MHz WX7 162.525 MHzWX2 162.400 MHz WX8 161.650 MHzWX3 162.475 MHz WX9 161.775 MHzWX4 162.425 MHz WX10 161.750 MHzWX5 162.450 MHz WX11 162.000 MHzWX6 162.500 MHz

Navigation menu